Roof, Wall and Hall Systems Certification according to DIN ISO 9001 / EN 29 001 by TÜV-CERT Protective Systems U n i q u e. W a t e r t i g h t. V e r s a t i l e. Layher More Possibilities. The Scaffolding System.
Overview of Protective Systems Roof Systems Wall Cladding Systems Hall Systems Roof Systems for stages, stands and podiums Planen roof Keder roof Cassette roof Protect System Keder rail system Scaffolding tarpaulins/nets Keder roof system hall Roof systems combined with wall cladding systems Stage roof Lifting roof for stages (special request) Grandstand roof Podium roof Layher roof systems Planen roof cost effective temporary roof solution that can be built almost exclusively using Layher series parts low-cost PE sheets make up the roof skin the roof trusses are made from 45 cm lattice girders (aluminium or steel) and steel U-profiles. stiffening bays are constructed using tube couplers as diagonals at the upper chord of the lattice girder (every fifth truss bay) tension member and corner struts must be additionally installed depending on the span the roof sheets are stapled to the wood inside the steel U-profile while holding them taut; their final tension is attained with specially angled cover plates and self tapping screws 5963.000 cover plate 2.0 m 5964.000 ridge plate 2.0 m 5963.001 facade screw 6.3 x 35 5960.100 roof profile 1.0 m 5960.112 roof profile 1.12 m 5960.200 roof profile 2.0 m 5965.257 ridge ledger 2.57 m 5971.120 roof support 0.73 m 5971.130 roof support 1.09 m 6215.257 scaffolding sheet blue 280 270 x 20 m duo-pitch roof (roof pitch 11 ) mono-pitch roof (roof pitch 11-20 ) spans up to 29 m bay width up to 2.57 m up to 12 m construction height snow load 0.25 kn/m 2 (with tension member) 2
Keder roof light and aesthetic weather resistant roof, quick to assemble, if necessary even without a crane can be built as mono- or duo-pitch roof the structure comprises of aluminium beams 1.5 and 3.0 m long, fitting together for a max. span of 15 m stiffening of the trusses by double and single tie bars and diagonals with snap-on claws, results in unbeatably fast assembly PVC tarpaulins with sealing beads (keder) on both sides can be pulled without difficulty into the upper chords of the lattice girders to form the roof skin 5971.150 roof beam 1.5 m 5971.300 roof beam 3.0 m 5972.150 mono-pitch roof beam 5971.110 ridge beam 5971.100 eaves beam 5971.257 double tie bar 5971.297 diagonal 2.97 m 5971.157 ledger 1.57 m 5971.207 ledger 2.07 m 5972.257 ledger 2.57 m 5971.120 support 0.73 m 5971.130 support 1.09 m For roof, gable and side sheets please refer to the price list for keder hall and planen roof system duo-pitch roof (roof pitch 20 ) mono-pitch roof (roof pitch 0 to 20 ) spans up to 15 m, greater spans on request bay width 2.57 m up to 12 m construction height snow load 0.25 kn/m 2 PVC sheets, cream-white, mesh-fabric-reinforced, surface weight 620 g/m 2 (normal inflammability as per DIN 75200) PVC sheets, cream-white, mesh-fabric-reinforced, surface weight 650 g/m 2 (low inflammability as per DIN 4102 B1) Cassette Roof modular technology with extremely sturdy and strong steel cassettes the advantages of the Layher cassette roof system are: entire roof surface can be walked on rapid and safe assembly with only a few components roof opens to permit material to be craned through long life can be used as a mobile roof structure 5902.200 roof girder 2.0 m 5902.300 roof girder 3.0 m 5901.000 ridge girder 5907.000 double tie bar 5909.100 roof cassette 1.0 m 5909.200 roof cassette 2.0 m 5911.000 ridge cassette 5915.000 roof support 0.73/1.09 m duo-pitch roof (roof pitch 11 ) mono-pitch roof (roof pitch 11 ) spans up to 36.9 m, greater spans with special measures bay width 2.57 m up to 20 m construction height snow load up to 0.75 kn/m 2 For connecting elements and additional parts please refer to the Layher Protect-System price list. 3
Layher Wall Cladding Systems Protect System cassette covering system suitable for Layher Allround and SpeedyScaf scaffolding environmental protection (asbestos removal), protection from dust, noise or from the weather rapid and easy assembly, simple and logical setting up sequence vacuum capability for asbestos removal dust-tight for sandblasting work weatherproof facade coverings increased noise prevention using noise insulation cassettes translucent cassettes provide daylight conditions roof cassettes as upper cover with supports (5987.000) easy to clean, electrostatic inactivity can be used as a pedestrian tunnel with special supports for IH roof cassettes (5909.200) 5980.xxx wall cassette x.xx m 5981.xxx light cassette x.xx m 5983.xxx connection rail x.xx m 5985.010 corner cassette 90 5985.011 connection rail 90 5986.010 SpeedyScaf holder 5986.020 SpeedyScaf corner holder 5986.030 Allround holder 5987.000 support for roof cassette 5987.xxx roof cassette x.xx m 5988.000 support for pedestrian tunnel For further additional parts please refer to the Layher Protect-System price list. bay widths up to 3.07 m cassette height 1.0 m sound insulation value 20 db with wall cassettes and 26 db with noise insulation cassettes scaffolding covering up to 90 m high with 2.57 m bay length (up to 50 m with 3.07 m bay length) support for pedestrian tunnels allows a total height of 24 m, scaffolding can shift inwards or outwards weight max. 22 kg (wall cassette) and 13 kg (translucent cassette) Keder rail system water resistant and dust-tight covering, weather protection continuous tight covering of the sides of the scaffolding reaching up past the eaves is possible wind loads must be calculated and verified in accordance with DIN 4420 structurally speaking, to be treated as a tarpaulin-covered scaffolding connection of the keder rail using spacer elements that can be moved to any position inside the T-groove of the rail can be used as a roof (coupled to lattice girders) for secondary purposes, minimum roof pitch 15, max. possible tarpaulin length 20 m rigid aluminium arches, for eaves and ridge when used in roofs 4201.130 aluminium keder rail 2000 1.3 m 4201.200 aluminium keder rail 2000 2.0 m 4201.220 aluminium keder rail 2000 2.2 m 4201.400 aluminium keder rail 2000 4.0 m 4201.000 rail holder with half-coupler 4201.001 rail holder with wedge head 6227.207 keder sheet 2.07 x 4.0 m 6227.257 keder sheet 2.57 x 4.0 m 6227.307 keder sheet 3.07 x 4.0 m 6228.207 keder sheet 2.07 x 10.0 m 6228.257 keder sheet 2.57 x 10.0 m 6228.307 keder sheet 3.07 x 10.0 m 4205.001 aluminium keder arch 2000 eaves 4205.002 aluminium keder arch 2000 ridge up to 50 m height, 3.07 m wide sheets are possible above 50 m height, max. 2.57 m width connection of keder rail every meter rail lengths 1.3 / 2.0 / 2.2 / 4.0 m standard sheet lengths: 4.0 and 10.0 m, longer on request sheet widths 2.07 / 2.57 / 3.07 m keder edge sheet with eyelet strip on one side for corner solutions 4
Scaffolding sheeting and nets protection for pedestrians and passing traffic during spraying and rough work on buildings rolled or single sheets in the dimensions of the scaffolding bay Scaffolding sheets: mesh-reinforced PE sheets with eyelet strips welded along the longitudinal side (eyelets 10 cm apart). Scaffolding nets: tear-resistant fine fabric structure, leno fabric of PP strips with 3 compressed eyelet strips (eyelets 10 cm apart) Advertising imprint: possible on request, please note minimum purchase quantities and delivery times Accessories: toggle ties for sheets connectors for sheeting joint disposable ties for sheets and nets rapid-action binders for nets 6215.257 scaffolding sheet 280, blue, 2.70 m 6215.307 scaffolding sheet 280, blue, 3.25 m 6216.257 scaffolding sheet 280, white, 2.70 m 6216.307 scaffolding sheet 280, white, 3.25 m 6217.257 scaffolding sheet 280, white, 2.70 m 6217.307 scaffolding sheet 280, white, 3.25 m 6226.257 scaffolding sheet 160, 2.70 m 6226.307 scaffolding sheet 160, 3.25 m 6219.257 scaffolding net 90, 2.60 m 6219.307 scaffolding net 90, 3.20 m 6220.257 scaffolding net 60, 2.50 m 6220.307 scaffolding net 60, 3.00 m 6217.000 toggle tie for sheets 6218.000 connector for sheeting joint 6240.000 disposable tie for sheets 6241.000 disposable tie for nets 6220.000 rapid-action binder for nets length 20 m standard dimensions of 2.57 and 3.07 m UV-stabilised scaffolding sheets: 280 g/m 2, blue 280 g/m 2, white 200 g/m 2, white 160 g/m 2, blue scaffolding nets: 90 g/m 2 60 g/m 2 5
Layher Hall Systems Keder roof system hall rigid corner and special wall element, for construction of a keder hall the rigid corner is used as a connecting element between the keder roof and the wall element two wall elements can be used one above the other duo-pitch roof (roof pitch 20 ) spans up to 12.80 m bay width 2.57 m snow load 0.25 kn/m 2 5971.160 rigid corner 5971.170 wall element 1.5 m Roof systems combined with wall cladding systems Keder roof + scaffolding system + side sheets Keder roof + scaffolding system + Protect-System 6 Cassette roof + scaffolding system + Protect-System
Roof systems for stages, stands and podiums Stage roof (cassette roof) stage roofing for open-air events can be constructed as cassette roof or keder roof lifting or swivelling roofs are available on request Stand roof (keder rail system) grandstand roofing for weather protection can be constructed as keder rail system or keder roof Podium roof (keder roof) lightweight and aesthetic weather protection roof, quick to assemble modular expansion possible keder roof structure the supports are formed by two Allround standards connected by a double wedge head coupler (2628.000) the keder roof support with spigot connector is fitted onto the inner standard and secured against lifting out the roof trusses are coupled into the supports duo-pitch roof (roof pitch 20 ) spans up to 14.50 m bay width 2.57 m up to 12 m construction height snow load 0.25 kn/m 2 0710.461 keder roof support with spigot connector 2604.300 open-ended standard 3.00 m 2628.000 double wedge head coupler 7
We re there for you. Wherever and whenever you need us. Layher in Germany Branches and delivery warehouses nationwide. Layher International Subsidiaries: Argentina, Austria, Belgium, Canada, France, Italy, The Netherlands, Poland, Spain, Sweden, Switzerland, United Kingdom, USA. Representatives: Chile, Croatia, Czech Republic, Denmark, Estonia, Finland, Greece, Hong Kong, Hungary, Iceland, Japan, Kuwait, Latvija, Lebanon, Lithuania, Luxembourg, Mexico, New Zealand, Norway, Oman, Romania, Russia, Saudi-Arabia, Singapore, Slovakia, Slovenia, Ukraine, United Arab Emirates, Yugoslavia and many other countries. Wilhelm Layher GmbH & Co.KG Scaffolding Grandstands Ladders Post Box 40 D-74361 Güglingen-Eibensbach Phone: (00 49) 71 35-7 00 Fax: (00 49) 71 35-7 03 72 E-mail: info@layher.com Web: www.layher.com Branches in the U.K.: Layher Ltd. Works Road Letchworth Hertfordshire SG61WL Phone: (00 44) 1462-475 100 Fax: (00 44) 1462-475 101 E-mail: info@layher.co.uk Web: www.layher.com Branch in the USA: Layher Inc. 8495 Moffet Road Semmes, Alabama 36575 Postal address: P.O. Box 1335 Semmes, Alabama 36575-1335 USA Phone: (001) 3346497696 Fax: (001) 3346497793 E-mail: Layhermobile@aol.com Web: www.layher.com Branch in Canada: Layher Inc. Fir Tree Drive Mississauga Ontario L5S 1G4 Canada Phone: (001) 9056737223 Fax: (001) 9056738001 E-mail: Layher@pathcom.com Web: www.layher.com The Layher Product Range Protective systems Event systems SpeedyScaf Allround scaffolding All dimensions and weights are guideline values. Subject to technical modifications. We shall make delivery exclusively on the basis of our currently valid general terms of business. Rolling towers Falsework Accessories Ladders More possibilities 8121.204 Edition 1-04-02.2