244 64 Push-to-Close Latch Pull-to-open Paddle latch Miniature Plastic slide 11 (.42) Stainless steel, passivated and brushed finish and glass-filled reinforced nylon, black working load: 90 N (20 lbf) 28 (1.10) 0.9 (.036) 43 (1.69) 13 (.53) 1.6 (.065) Thickness Operating temperature range: -18ºC (0ºF) to 100ºC (210ºF) Flammability rating: UL94-V0 Installation Notes tightening torque on mounting screws: 0.9 N m (8 in lbf) 8 (.32) 3.2±.2 (.125±.010) Total grip +0.1 24.5-0.3 (.96±.01) R 1.5 (.06) 9 (.36) +0.1 39-0.3 9.50±.8 (1.53±.01) (.38±.03) M4 slotted hex head screw/lockwasher assembly (supplied) Part Number See table Part Number 64-01-10
64 Push-to-Close Latch Pull-to-open Paddle latch Small 245 Cup Paddle Plastic slide 47 (1.84) 42.5 (1.67) 14 (.56) Stainless steel, passivated and brushed or black powder coated and glass-filled reinforced nylon, natural working load: 1 (.04) thickness range (see table) 56 (2.20) B Style Max. Static Load N (lbf) 1 130 (30) 2 110 (25) 3 90 (20) 25 (.97) 13 (.50) Bracket Cover Grip range (see table) Slide (style 1 shown) 4 70 (15) 5 55 (12) Operating temperature range: -18ºC (0ºF) to 100ºC (210ºF) Flammability rating: UL94-V0 36.5±0.2 (1.44±.01) 47.5±0.2 (1.88±.01) R 2 (.09) 16 (.63) Minimum 10.3±0.2 (.41±01) A Stud, M4 Thread Stud Bracket Installation Notes thickness must not exceed T dimension (see table) in area through which slide will operate. It may be necessary to reduce thickness of door in area indicated by grid. Slide styles: Style 3 Style 4 Grip Range Slide Style A Minimum Min. Max. B T (See Notes) 3.7 (.144) Part Number Brushed Finish Thickness Range 3.9-7.3 (.154 -.288) 11.1-14.6 (.437 -.576) 18.6-22 (.734 -.868) Style 5 1.2 (.05) 2 (.08) 1 10.4 (.41) 12.7 (.50) 12.4 (.49) 1.6 (.063) 64-10-111-50 ~ ~ ~ Style 6 2.8 (.11) 3.6 (.14) 3 3.2 (.125) 64-10-113-50 64-10-133-50 ~ ~ 6 (.23) 12.3 (.48) 18.6 (.73) 6.7 (.27) 4 13.1 (.52) 5 19.4 (.77) 6 11.9 (.47) 14.2 (.56) 14.2 (.56) 6.4 (.250) 7.1 (.281) 7.1 (.281) 64-10-124-50 64-10-114-50 ~ ~ 64-10-125-50 64-10-135-50 64-10-115-50 64-10-115-50 64-10-126-50 ~ 64-10-116-50 64-10-116-50 Notes For an assembly with black powder coated finish change last digit from 0 to 5 - Example: 64-10-111-55
246 64 Push-to-Close Latch Pull-to-open Paddle latch Small Metal slide Cup Paddle Stainless steel passivated and brushed or black powder coated, steel, chrome plated working load: 222 N (50 lbf) 47 (1.84) 42.5 (1.67) 14 (.56) 1 (.04) 56 (2.20) B Grip range (see table) 13 (.50) 25 (.97) Cover Bracket Stud, M4 Thread Slide 47.5±0.2 (1.88±.01) A 36.50±.2 (1.44±.01) R 2 (.09) Stud Bracket Part Number See table Grip Range Part Number A Stainless Steel Black Powder Minimum Stainless Steel, Brushed Minimum coated 1.2 (.05) 2 (.08) 64-11-10 64-11-12 10.4 (.41) 12.7 (.50) 11.5 (.45) 2 (.08) 2.8 (.11) 64-11-20 64-11-22 11.2 (.44) 13.5 (.53) 11.9 (.47) 2.8 (.11) 3.6 (.14) 64-11-30 64-11-32 11.9 (.47) 14.2 (.56) 12 (.48) B
64 Push-to-Close Latch Pull-to-open Paddle latch Medium 247 6.4 (.25) thickness 36 (1.39) 17.5 (.69) Mounting bracket Adjusting nut Lockwasher Latch Available with or without lock (see part number selection) 84 (3.31) M5 Thread Gap important (See installation notes) 19 (.75) 8 (.31) 1.2 (.05) 7.9 (.31) 68.5 (2.69) Metal slide Stainless steel brushed, steel, zinc plated or steel, black powder coated or silver working load: 570 N (125 lbf) Installation Notes Measure your door thickness and set adjusting nut so that Gap is equal to door thickness within plus 0.8 (.03), minus 0.0 (.00). Flat key, keyed alike H257 Part number: 64-0-33578 Minimum 8 (.31) 11 (.44) 14.3 (.56) Ref 8. (.31) Minimum 11 (.44) 7.9 (.31) +0.3 55.5-0.1 (2.19±.01) R 2.5 (.09) +0.1 71.5-0.3 (2.81±.01) Gap important (see installation notes) Slide Adjusting nut Mounting bracket Lockwasher 11.1 (.44) Min Edge of frame or modified latching surface (notch, hole, bracket or shim) Part Number Selection 64-2 L - 1 M 0 Stainless steel, brushed 1 Steel, black powder coated 3 Steel, zinc plated 5 Steel, powder coated silver 1 Non-locking 2 Key-locking keyed alike H257 (2 Flat keys supplied)
248 64 Push-to-Close Latch Pull-to-open Paddle latch Large Metal slide Stainless steel, brushed, steel, zinc plated or steel, black powder coated working load: 1110 N (250 lbf) Available with or without lock (see part number selection) 28.5 (1.13) 101.5 (4) Installation Notes Measure your door thickness and set adjusting nut so that GAP is equal to door thickness within plus 0.8 (.03), minus 0.0 (.00) Flat key, keyed alike CH751 Part number: PK-10-01 49 (1.94) 25.5 (1.01) door thickness 9.5 (.38) Mounting bracket Adjusting nut Lockwasher 127 (5.0) 4.5 (.17) Gap important (See installation notes) 1/4-20 Thread 11 (.44) 1.6 (.06) 11.9 (.47) Overmolded key, keyed alike CH751 Part number: PK-10-01-05 Minimum 11 (.44) 15.9 (.63) 20.6 (.81) Ref 11.9 (.47) +0.3 82.5-0.2 (3.25±.01) R 3 (.13) +0.2-0.3 108 (4.25±.01) Gap important (see installation notes) Slide Adjusting nut Mounting bracket Lockwasher 14.3 (.56) Min Edge of frame or modified latching surface (notch, hole, bracket or shim) Part Number Selection 64-10 - 30 L - M 0 4 Steel, zinc plated 5 Stainless steel brushed 9 Steel, black powder coated 1 Non-locking 2 Key-locking keyed alike CH751 (2 Flat keys supplied)
64 Push-to-Close Latch Pull-to-open Paddle latch Large 249 139.7 (5.50) 10.2 (.40) Multiple mounting styles Inside actuation in locked or unlocked position 108 (4.25) Available with or without lock (see part number selection) 22.6 (.89) Stainless steel, polished, steel, zinc plated or steel, black powder coated Slide bolt and lock assembly: Zinc plated or powder coated working load: 560 N (125 lbf) 1.2 (.05) 4 x Ø H rivet mounting only Flat key, keyed alike CH751 Part number: PK-10-01 23.4 (.92) 43 (1.7) 118 (4.65) 95.2 (3.75) Tapped hole 1/4-20 for inside release handle (not provided) Overmolded key, keyed alike CH751 Part number: PK-10-01-05 96.8 (3.81) 86 (3.38) 4 x R5 (.20) 20.9 (.82) 22 (.87) 14 (.55) 4 x Ø H rivet mounting only 15 (.59) 64-50 - 4 L H - M 10 Steel, zinc plated 20 Stainless steel polished 50 Steel, black powder coated Part Number Selection 0 Non-locking 1 Key-locking keyed alike CH751 (2 Flat keys supplied) H Housing 0 Weld 1 Rivet through hole 4.9 (.19) 2 Rivet through hole 5.2 (.20)
250 64 Push-to-Close Actuator Pull-to-open Paddle handle actuator Multi-point Large For use with R4 rotary latches Multiple mounting styles 139.7 (5.50) 29 (1.14) Latched 25 (1.0) Unlatched Stainless steel, polished, steel, zinc plated or black powder coated Flat key, keyed alike CH751 Part number: PK-10-01 108 (4.25) Available with or without lock (see part number selection) 4 x Ø H rivet mounting only 47 (1.85) Unlatched 70 (2.75) Latched 1.2 (.05) Overmolded key, keyed alike CH751 Part number: PK-10-01-05 Ø 2.3 (.09) Ø 6.3 (.25) 3 (.13) 23 (.91) 12 (.45) 40.9 (1.61) 118 (4.65) 95.2 (3.75) Notes Contact Southco for recommended cable or rods For applicable rotary latches see page 254 96.8 (3.81) 86 (3.38) 4 x R 5 (.20) H 4 x Ø Rivet mounting only Part Number Selection H Housing 0 Weld 1 Rivet through hole 4.9 (.19) 2 Rivet through hole 5.2 (.20) 10 Steel, zinc plated 20 Stainless steel, polished 50 Steel, black powder coated 64-40 - 4 L H - M 0 Non-locking 1 Key-locking keyed alike CH751 (2 Flat keys supplied)
64 Push-to-Close Latch Pull-to-open Paddle latch Heavy-duty pivot 251 5 (.20) 110 (4.33) 100 (3.94) 5.3 (.21) 52 (2.05) 170 (6.7) 52 (2.05) 52 (2.05) Available with or without lock (see part number selection) 7 (.28) 83 (3.27) 8 x Ø H rivet mounting latches only 88.4 (3.48) 9 (.35) Robust design resists binding from dirt and debris Multiple mounting styles Steel, zinc plated or black powder coated Slide bolt and lock assembly: Zinc plated or powder coated working load: 2700 N (607 lbf) Flat key, keyed alike 14603 Part number: PK-10-01-14603 147.7 (5.81) 89 (3.50) 4 x R5 thickness 17.2 (.68) 37.9 (1.49) Part Number Selection 64-60 - 5 L H - M 10 Steel, zinc plated 50 Steel, black powder coated 0 Non-locking 1 Key-locking keyed alike 14603 (2 Flat keys supplied) H Housing 0 Weld 1 Rivet through hole 4.9 (.19) 2 Rivet through hole 5.2 (.20)