CertaDrive CertaDrive 40W 1.05A 38V I 230V

Similar documents
Electronic ballasts for fluorescent lamps Products for special applications. PC BASIC, 4 28 W Electronic ballast for system output < 25 W

PHASED OUT. Digital dimmable ballasts for fluorescent lamps ECO series. PCA TCL ECO, W Compact and T5c fluorescent lamps

PHASED OUT. Digital dimmable ballasts for fluorescent lamps EXCEL one4all series. PCA TCL EXCEL one4all, W Compact and T5c fluorescent lamps

FL ballasts Electronic dimming. PCA T5 BASIC lp Y II, W BASIC T5

O WA-120U series IP W Single Output Switching Power Supply. Features. Aplications

Fortimo LED Line Gen3

Nominal Power [W] Radiance Angle [ ] Color Temp. [K]

LED Driver Compact dimming. Udriver LCAI 100W 900mA 1750mA ECO SR ECO series

STRATO LED Drivers 70W, Single output

SWITCH! DESCRIPTION. ENVIRONMENTAL SPECIFICATIONS Operating Temperature: 0 C to +40 C SPECIFICATION SHEET:

Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points

Electronic timer CT-VBS OFF-delayed without auxiliary voltage, for DC contactors Data sheet

FL ballasts Electronic dimming. PCA T5 ECO lp Y II, W ECO T5

33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application

FL ballasts Electronic dimming. PCA T5 EXCEL one4all lp Y II, W EXCEL T5

of the LED control gear Compact dimming Uconverter LCAI 55W 900mA 1750mA ECO SR ECO series

Radiance Angle [ ] Nominal Power [W] Color Temp. [K]

PWM-60 series IP67 TRC ELECTRONICS, INC

Fortimo LED SLM Gen4

PWM-90 series IP67 TRC ELECTRONICS, INC Mean Well PWM-90 Series

OPTOTRONIC LED Power Supply OT180W/UNV/800C/2DIMLT2/P6 - Technical Specifications

Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact

AOK i Series LED High Bay / Flood / Tunnel Light

Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start * see variants. Applications.

Emergency lighting units EM powerled

Chrome DIN Rail Power Supply 24V 91.2W 1 Phase (Class II & NEC Class 2) / DRC-24V100W1AZ

Technical application guide

Chrome DIN Rail Power Supply 24V 30W 1 Phase (Class II & NEC Class 2) / DRC-24V30W1AZ

12V Dimmable Driver EL-TMDRVR

MASTER LEDluster. MASTER LEDluster D 4-25W E14. Product data

Three-phase monitoring relay CM-PFE

Telephone- and leased line modem for industrial applications TD-36

LED-INTA-0024V-41-F-O

LED control gear. LED control gear

STEP-PS/1AC/12DC/1.5. Extract from the online catalog. Order No.: DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase

RoHS APPROVAL SHEET. ituner 12V/6.6A SERIES NO. (E17) EA10953A. ( ) Edac Power Electronics (Suzhou) Co., Ltd. 59 No.59, Chang Sheng Road, Sheng Pu,

Series AMEPR30-AZ up to 2.5A AC-DC / DC-DC LED Driver / Converter

Radiance Angle [ ] Color Temp. [K]

LED Driver Compact dimming. Udriver LCAI 35W 350mA 900mA ECO C ECO series

Chrome DIN Rail Power Supply 12V 54W 1 Phase (Class II & NEC Class 2) / DRC-12V60W1AG

JNIOR. Overview. Get Connected. Get Results. JNIOR Model 310. JNIOR Model 312. JNIOR Model 314. JNIOR Model 410

IVIOS LED III. LUM Technical Information

Silvertel. Ag Features. 2 Description. Power-over-Ethernet Plus Module. IEEE802.3at and IEEE802.3af compliant. Maximum 30W output power

AC-DC Single Output Power Module

CliQ DIN Rail Power Supply 24V 120W 1 Phase / DRP024V120W1AA

Inductive Proximity Sensors

38 Series - Relay interface modules A

DRM75A 230V 20/100A DIN rail single phase two wire energy meter

Power Supply Unit, Primary Switched, Narrow Design MINI-PS-12-24DC/24DC/1

JUMPFLEX 857 Series ma V ma. Transducers / Relay and Optocoupler Modules

FL ballasts Electronic dimming. PCA T5 EXCEL one4all lp Y, 3x14/24 W and 4x14/24 W EXCEL T5

MICROSENS. Central 48 V DC Power Supplies for PoE-Components. Description. Features

ABB 1. Three-phase monitoring relay CM-PFS. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories. Application.

Type: EASY719 DC RC Article No.: Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC. Description

Analog signal converters CC-E I/I Current / current isolators

帝 聞 企 業 股 份 有 限 公 司 DEE VAN ENTERPRISE CO., LTD. SP DSL-20WA Revision: A Date: FOR AC-DC LED DRIVER MODEL NO.

DATA SHEET. BC875; BC879 NPN Darlington transistors DISCRETE SEMICONDUCTORS. Product specification Supersedes data of 1999 May 28.

Example of use: Fuse for a solenoid valve. If the fuse is defective, no information is sent to the electronic component.

Power Supplies 3. SDN-P DIN Rail Series

User s Manual Before using the inverter, you need to read and save the safety instructions.

LED Module SPECIFICATION. LED Module for Modular Platform Series. LED Platform Module with Fin

7.5 Watt AC-DC Switch Power Supply

Electrical Specifications

Custom Products. Magnetic Components. Vishay Dale.

Rack mounted telephone- and leased line modem for industrial applications

Operating Manual UWAPS-TINY Series

LightingEurope EU Compliant Requirements Products Sheets for LIGHTING COMPONENTS

Flux CCT. CRI SDCM (lm) (K) (V) (ma) (W) (lm/w)

Top Microsystems Proprietary Specification P/N: W090015HK-XP RB V.A0 SPECIFICATION

Relés e Contatores de Estado Sólido SIRIUS

Stand Alone POTS Fiber Optic System. P31372 Station (Subscriber) Unit P31379 Remote (Exchanger) Unit. Description & Installation

AC/DC Power Modules C B. TML Series, 20 & 40 Watt. Features. 20 Watt Models

LINEA 120 FIXED Colour White = MW Matte White RAL 9016 Colour Black = BL Matte Black RAL 9005 Beam Angle 60 EN60598 / EN62031 / EN62471.

Single-phase ( V) voltage monitoring: Undervoltage Overvoltage Window mode (overvoltage + undervoltage) Voltage fault memory selectable

PCS0100en Persy Control Services B.V. Netherlands

WINGLIKE ELECTRONICS CO.,LTD

650W Single Output Power Supply 15V 24V. 27V 48V Rated Current. 0 ~ 100A 0 ~ 50A 0 ~ 40A 0 ~ 27A 0 ~ 24A 0 ~ 13.6A Rated Power

Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous

UMEC International Corporation

LANTANA LUMINAIRE HI-LUME 1% ECOSYSTEM LED DRIVER L3DA4U1UMN-XXXXX

Actuator-Sensor-Interface

AAV003-10E Current Sensor

1000W Single Output Power Supply 15V 24V. Protection type: Total Power limit, Latch-style (Recovery after reset AC power ON or inhibit)

LED light engine / OLED LED linear / area. Umodule STARK QLE G3 lens CLASSIC umodule QLE

ODOT ITB Section 4: Flashers, Timers, & Software Systems Item 4-1

Electronic overload relay EF19 and EF45

Xitanium LED ELECTRONIC DRIVERS

38 Series - Relay interface modules A

DuroSite TM High Bay Lighting

DISCRETE SEMICONDUCTORS DATA SHEET

ABB central inverters PVS to 1000 kw

Electronic overload relay EF65, EF96 and EF146

DALI Power Module (LQSE-2DAL-D) DALI Bus 1. DALI Bus 2. HomeWorks. Wallstation. Power. Eye QS Control Power Up to 100. Module.

ABB i-bus KNX Switch Actuator, x-fold, 16 A, MDRC SA/S x , 2CDG1101xxR0011

RM35UA13MW. range V. Main. Product or component type. Relay monitored parameters

Safety technique. Emergency stop module BO 5988 safemaster

LED Lighting. Emergency LED Products. The Philips Bodine BSL Driver Family ELI-S-20 Emergency Lighting Micro Inverter ELI-S-100 Dimming Inverter

Global Motion Technology Inc Web THCSA200. Capacitive sensor plasma & Oxy-fuel Torch Height Control

650W Single Output Power Supply

ABB i-bus KNX Switch Actuator, x-fold, 16/20 A, MDRC SA/S x , 2CDG 110 1xx R0011

Transcription:

CertaDrive Affordable and reliable LED Drivers Affordable LED Driver range offering Philips reliability. The CertaDrive range is compatible with COB and mid-power LEDs from any LED manufacturer. Benefits Driver design based on Philips experience and knowledge of conventional fluorescent and HID technologies Various power wattage Drivers that are related to the lumen packages/applications Fixed output Drivers Independent-version housing design for stand-alone installations Features High reliability Luminaire design flexibility to keep stable/constant Lumen output and light quality levels Fast Time to Market One supplier for professional general lighting LED Drivers Affordable LED Drivers Applications Public buildings (airports, cinemas, theaters, exhibition halls) Retail (supermarkets, shops) Office

Electrical input data minal input voltage 220...240 Vac minal input frequency 50...60 Hz minal input current 0.22 A minal input power 47 W Power factor 0.9 Total harmonic distortion 20 Efficiency 85, maximum output power Input voltage AC 202...254 Vac Performance range Input frequency AC 47.5...63 Hz Maximum permissible range Regulation method Constant Current Output voltage 32...42 Vdc Output voltage max. 60 V Peak voltage (RMS) at open load Output current 0.945...1.155 A Full output current setting Output current tolerance ± 10 Output current ripple 30 Ripple (100Hz) = peak / average Output power 33...40 W Full output Galvanic isolation SELV Electrical output data Lamp to mains Electrical data controls input Control method Fixed Wiring Input wire cross-section 0.2...1.5 2 WAGO250 (3.5 ), solid wire WAGO250 (3.5 ), solid wire 16...24 AWG Input wire strip length 8.5...9.5 Output wire cross-section 0.2...1.5 2 WAGO250 (3.5 ), solid wire 16...24 AWG WAGO250 (3.5 ), solid wire Output wire strip length 8.5...9.5 Maximum cable length 600 Total length of wiring including LED module, one way Page 2 of 6

Dimensions and weight Length (A1) 105 Width (B1) 68 Height (C1) 32 Fixing hole diameter (D1) 3.6 Fixing hole distance (A2) 87 Weight 129 gram Operational temperatures and humidity Ambient temperature +0...+45 Tcase-max 75 Maximum temperature measured at Tc-point Tcase-life 65 Measured at Tc-point Maximum housing temperature 130 In case of a failure Relative humidity 10...90 n-condensing Storage temperature and humidity Ambient temperature -25...+85 Relative humidity 5...95 n-condensing Driver lifetime 30,000 hours Measured temperature at Tc-point is Tcase-life. Lifetime Maximum failures = 10 Prograable features Remark Set output current (AOC) See Design-in guide. Default output current: 1.05 A LED module temperature derating (MTP) Constant Lumen Over Lifetime (CLO) DC emergency diing (DCemDIM) Corridor mode Energy metering Diagnostics Current output decreased to 15 Page 3 of 6

Features Open load protection Yes Remark Automatic recovering Short circuit protection Yes Automatic recovering Over power protection Automatic recovering Hot wiring Suitable for fixtures with protection class II Certificates and standards Approval marks CE / ENEC Ingress Protection classification 20 Additional information Inrush current Inrush current Ipeak 16 A Input voltage 230V Inrush current Twidth 240 µs Input voltage 230V, measured at 50 Ipeak Drivers / MCB 16A type B 35 pcs Earth leakage current 0.7 mapk LED module contribution not included Mains surge capability (L-N) 1 kv Mains surge capability (L/N-Ground) 2 kv Earth leakage current Surge capability Page 4 of 6

Graphs Operating window Power factor versus output power Efficiency versus output power Page 5 of 6

Logistical data Product name Order code Logistic code 12NC 9290 009 31908 EAN3 Pieces per box 32 2014 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Data subject to change. Date of release: www.philips.com/xitanium