Pulp Bale Clamps and. Waste Paper Bale Clamps

Pulp Bale Clamps s KB-G...-1 s KS-G...- s B-PF...-4 s BC-PF...-5 s P...-6 s N...-7 Waste Paper Bale Clamps s KS-W...-8 s B-PU...-9 s BC-PW...-10 Pulp Bale Clamps, Rotating s KG-G...-11 s KG-GC...-13 Pulp Bale and Waste Paper Bale Clamps Technical Information...-14 Pulp Bale and Waste Paper Bale Clamps Accessories and Options...-15 Pulp Bale Clamps and Waste Paper Bale Clamps

Pulp Bale Clamps and Waste Paper Bale Clamps

Bale Clamps s KB-G Strong double T-profile frame. Commonly used for handling pulp bale in the paper industry, it s also used for cotton, wool, fabrics, tobacco and other similar products. Excellent visibility. Slim arms for easy knifing between bale stacks. The valve and the cylinder rods are protected in every opening position. Reduced weight, effective thickness and centre of gravity. Arm Dimensions Minimum Carriage Width Q BP B LxAxExT I FL D W HCG VCG LL U V P C ISO kg mm mm mm mm mm mm kg mm mm mm mm mm mm mm 38 KB 10 GA 58-181 1000 500 580-1810 700x400x5x45 930 750 604 71 160 38 11 343 0 9 15 A KB 10 G4A 58-181 1000 500 580-1810 1000x400x30x45 930 750 604 34 40 6 11 343 0 9 3 A KB 10 G6A 58-181 1000 500 580-1810 100x400x30x45 930 750 604 349 90 18 11 343 0 9 9 A KB 14 GA 58-181 1400 500 580-1810 700x400x5x45 930 750 604 85 166 38 114 341 00 9 15 A KB 14 G4A 58-181 1400 500 580-1810 1000x400x30x45 930 750 604 341 46 6 114 341 00 9 3 A KB 14 G6A 58-181 1400 500 580-1810 100x400x30x45 930 750 604 367 95 18 114 341 00 9 9 A KB 18 G4A 64-197 1800 500 640-1970 1000x400x30x45 970 750 604 346 36 46 119 340 197 9 3 A KB 18 G6A 64-197 1800 500 640-1970 100x400x30x45 970 750 604 370 305 38 119 340 197 9 9 A KB 18 G8A 64-197 1800 500 640-1970 1600x400x35x45 970 750 604 437 345 8 119 340 197 9 39 A KB G4A 64-197 00 500 640-1970 1000x400x30x45 970 750 604 364 41 46 11 338 195 9 3 A KB G6A 64-197 00 500 640-1970 100x400x30x45 970 750 604 389 310 38 11 338 195 9 9 A KB G8A 64-197 00 500 640-1970 1600x400x35x45 970 750 604 460 350 8 11 338 195 9 39 A KB 5 G4B 64-37 500 500 640-370 1000x400x30x45 1370 750 715 44 44 46 130 383 40 0 3 3 A KB 5 G6B 64-37 500 500 640-370 100x400x30x45 1370 750 715 468 304 38 130 383 40 0 9 3 A KB 5 GXB 64-37 500 500 640-370 1600x400x35x45 1370 750 715 51 381 8 130 383 40 0 39 3 A Side Visibility Central Visibility Ground Clearance Arm Toe-in Notes: E= arm thickness, without rib. T= arm thickness at the base, without rib. Standard fittings: One hydraulic function required. Pressure relief valve. Arms welded directly to the guides. Check valve with power regeneration hydraulic circuit (for KB 10 ). On request: Separate sideshift. Special openings. Pressure gauge. Load backrest. Independent arm control valve. Arms of various dimensions. Integral sideshift. -1

Pulp Bale Clamps s KS-G Strong double T-profile frame. Designed to specifically handle pulp bales. Excellent lateral visibility through the clamping arms. Slim arms for easy knifing between bale stacks. Reduced weight, effective thickness and centre of gravity. Wear bars to protect the frame and the arms. Integral sideshift to best position the load. Arm Dimensions Minimum Carriage Width Q BP B LxAxExT I FL D W HCG VCG LL U P C ISO kg mm mm mm mm mm mm kg mm mm mm mm mm mm 38 KS 18 G4A 47-176 1800 600 470-1760 1000x400x30x45 1100 750 604 381 38 46 11 338 9 3 A KS 18 G6A 47-176 1800 600 470-1760 100x400x30x45 1100 750 604 406 308 38 11 338 9 9 A KS 18 G8A 47-176 1800 600 470-1760 1600x400x35x45 1100 750 604 477 349 8 11 338 9 39 A KS 18 G4A 64-197 1800 600 640-1970 1000x400x30x45 970 750 604 364 41 46 11 338 9 3 A KS 18 G6A 64-197 1800 600 640-1970 100x400x30x45 970 750 604 389 310 38 11 338 9 9 A KS 18 G8A 64-197 1800 600 640-1970 1600x400x35x45 970 750 604 460 350 8 11 338 9 39 A KS 3 G4B 50-185 300 600 500-1850 1000x450x40x65 100 850 713 655 68 34 144 363 9 18 3 A KS 3 G6B 50-185 300 600 500-1850 100x450x40x65 100 850 713 685 38 6 144 363 9 3 A KS 3 G4B 5-197 300 600 50-1970 1000x450x40x65 180 850 713 670 68 34 144 363 9 18 3 A KS 3 G6B 5-197 300 600 50-1970 100x450x40x65 180 850 713 700 38 6 144 363 9 3 A KS 3 G4B 61-15 300 600 610-150 1000x450x40x65 180 850 713 67 68 34 144 363 9 18 3 A KS 3 G6B 61-15 300 600 610-150 100x450x40x65 180 850 713 70 38 6 144 363 9 3 A KS 3 G4B 65-38 300 600 650-380 1000x450x40x65 140 850 713 685 68 34 144 363 9 18 3 A KS 3 G6B 65-38 300 600 650-380 100x450x40x65 140 850 713 715 38 6 144 363 9 3 A KS 3 G8B 65-38 300 600 650-380 1500x450x45x65 140 850 713 800 40 5 144 363 9 30 3 A KS 40 G4B 53-198 4000 600 530-1980 1000x450x40x65 150 1050 780 690 83 6 150 375 0 18 3 A KS 40 G6B 53-198 4000 600 530-1980 100x450x40x65 150 1050 780 745 343 54 150 375 0 3 A KS 40 G4B 59-13 4000 600 590-130 1000x450x40x65 180 1050 780 695 83 6 150 375 0 18 3 A KS 40 G6B 59-13 4000 600 590-130 100x450x40x65 180 1050 780 750 343 54 150 375 0 3 A KS 40 G4B 60-37 4000 600 600-370 1000x450x40x65 1500 1050 780 730 71 65 150 375 0 18 3 A KS 40 G6B 60-37 4000 600 600-370 100x450x40x65 1500 1050 780 785 39 57 150 375 0 3 A Side Visibility Ground Clearance Arm Toe-in -

Arm Dimensions Minimum Carriage Width Q BP B LxAxExT I FL D W HCG VCG LL U P C ISO kg mm mm mm mm mm mm kg mm mm mm mm mm mm 38 KS 40 G8B 60-37 4000 600 600-370 1500x450x45x65 1500 1050 780 955 46 46 150 375 0 30 3 A KS 40 G9B 60-37 4000 600 600-370 1700x450x45x65 1500 1050 780 1016 501 48 150 375 0 37 3 A KS 40 G4B 76-66 4000 600 760-660 1000x450x40x65 1590 1050 780 760 63 67 150 375 0 18 3 A KS 40 G6B 76-66 4000 600 760-660 100x450x40x65 1590 1050 780 815 319 59 150 375 0 3 A KS 40 G8B 76-66 4000 600 760-660 1500x450x45x65 1590 1050 780 985 451 48 150 375 0 30 3 A KS 40 G9B 76-66 4000 600 760-660 1700x450x45x65 1590 1050 780 1076 51 50 150 375 0 37 3 A Side Visibility Ground Clearance Arm Toe-in Notes: E= arm thickness, without rib. T= arm thickness at the base, without rib. Standard fittings: Integral sideshift. Pressure relief valve. Arms welded directly to the guides. Check valve. Power regeneration hydraulic circuit (for models KS16) On request: Separate sideshift. Special openings. Pressure gauge. Load backrest. Independent arm control valve. Arms of various dimensions. Colorless arm finish. -3

Pulp Bale Clamps s B-PF Bale clamp for handling pulp bales. Aluminium profile frame, strong T-profile arm carriers. Bolted pulp bale arms. Colourless arm finish. Left arm pivoted. Slim and strong arm design ensures easy knifing and tight stacking. Built-in integral sideshift improves positioning. Arm Length Arm B L N C D HCG VCG LL H ISO kg mm mm mm mm mm mm kg mm mm mm mm 38 B-400PF 1RH1 4000 800 60-170 100 445 1400 85 1110 319 x 37 74 3A/4A B-400PF 14RH1 4000 800 60-150 1400 445 1400 85 1165 364 x 37 74 3A/4A B-400PF 16RH1 4000 800 60-140 1600 445 1400 85 15 404 x 37 74 3A/4A B-400PF 1RJ1 4000 800 70-370 100 445 1400 85 1130 316 x 37 74 3A/4A B-400PF 14RJ1 4000 800 70-350 1400 445 1400 85 1185 360 x 37 74 3A/4A B-400PF 16RJ1 4000 800 70-340 1600 445 1400 85 145 400 x 37 74 3A/4A B-400PF 1TH1 4000 800 60-370 100 445 1600 85 1135 313 x 37 74 3A/4A B-400PF 14TH1 4000 800 60-350 1400 445 1600 85 1190 357 x 37 74 3A/4A B-400PF 16TH1 4000 800 60-340 1600 445 1600 85 150 397 x 37 74 3A/4A B-400PF 1TJ1 4000 800 70-570 100 445 1600 85 1155 310 x 37 74 3A/4A B-400PF 14TJ1 4000 800 70-550 1400 445 1600 85 110 353 x 37 74 3A/4A B-400PF 16TJ1 4000 800 70-540 1600 445 1600 85 170 393 x 37 74 3A/4A B-400PF 1UH1 4000 800 60-470 100 445 1700 85 1150 309 x 37 74 3A/4A B-400PF 14UH1 4000 800 60-450 1400 445 1700 85 105 35 x 37 74 3A/4A B-400PF 16UH1 4000 800 60-440 1600 445 1700 85 165 39 x 37 74 3A/4A B-400PF 1UJ1 4000 800 70-670 100 445 1700 85 1175 305 x 37 74 3A/4A B-400PF 14UJ1 4000 800 70-650 1400 445 1700 85 130 348 x 37 74 3A/4A B-400PF 16UJ1 4000 800 70-640 1600 445 1700 85 190 387 x 37 74 3A/4A B-400PF 1VH1 4000 800 60-570 100 445 1800 85 1175 303 x 37 74 3A/4A B-400PF 14VH1 4000 800 60-550 1400 445 1800 85 130 346 x 37 74 3A/4A B-400PF 16VH1 4000 800 60-540 1600 445 1800 85 190 385 x 37 74 3A/4A B-400PF 1VJ1 4000 800 70-770 100 445 1800 85 100 300 x 37 74 3A/4A B-400PF 14VJ1 4000 800 70-750 1400 445 1800 85 150 34 x 37 74 3A/4A B-400PF 16VJ1 4000 800 70-740 1600 445 1800 85 1310 381 x 37 74 3A/4A Two hydraulic functions. Special opening ranges, arm lengths and arm finishes on request. External sideshift available. Independent arm movement extra. Please see page -16. -4

Pulp Bale Clamps s BC-PF Bale clamp for handling pulp bales Colourless arms welded directly to the arm carriers Extremely thin and light design with optimal visibility Steel profile frame, strong T-profile arm carriers Left arm pivoted Slim arm design Built-in integral sideshift Arm Length Arm B L N C D HCG VCG LL H ISO kg mm mm mm mm mm mm kg mm mm mm mm 38 BC-50PF 1TH1 5000 800 630-360 100 490 1600 874 130 91 31 190 80 4A BC-50PF 14TH1 5000 800 630-360 1400 490 1600 874 195 335 315 190 80 4A BC-50PF 16TH1 5000 800 630-360 1600 490 1600 874 1360 38 308 190 80 4A BC-50PF 1TJ1 5000 800 730-560 100 490 1600 874 155 88 3 190 80 4A BC-50PF 14TJ1 5000 800 730-560 1400 490 1600 874 1315 331 316 190 80 4A BC-50PF 16TJ1 5000 800 730-560 1600 490 1600 874 1385 378 309 190 80 4A BC-50PF 1VH1 5000 800 630-560 100 490 1800 874 165 84 3 190 80 4A BC-50PF 14VH1 5000 800 630-560 1400 490 1800 874 1330 37 316 190 80 4A BC-50PF 16VH1 5000 800 630-560 1600 490 1800 874 1395 373 310 190 80 4A BC-50PF 1VJ1 5000 800 730-760 100 490 1800 874 190 81 33 190 80 4A BC-50PF 14VJ1 5000 800 730-760 1400 490 1800 874 1355 34 317 190 80 4A BC-50PF 16VJ1 5000 800 730-760 1600 490 1800 874 140 370 310 190 80 4A BC-65PF 1H1 6500 800 630-960 100 490 00 974 1610 58 361 10 80 4A BC-65PF 14H1 6500 800 630-960 1400 490 00 974 1680 95 355 10 80 4A BC-65PF 16H1 6500 800 630-960 1600 490 00 974 1750 334 347 10 80 4A BC-65PF 1J1 6500 800 730-3160 100 490 00 974 1690 50 361 10 80 4A BC-65PF 14J1 6500 800 730-3160 1400 490 00 974 1710 9 356 10 80 4A BC-65PF 16J1 6500 800 730-3160 1600 490 00 974 1780 331 349 10 80 4A BC-65PF 14H1 6500 800 630-3160 100 490 400 974 1660 5 360 10 80 4A BC-65PF 144H1 6500 800 630-3160 1400 490 400 974 1730 88 354 10 80 4A BC-65PF 164H1 6500 800 630-3160 1600 490 400 974 1800 37 347 10 80 4A BC-65PF 14J1 6500 800 730-3360 100 490 400 974 1660 63 359 10 80 4A BC-65PF 144J1 6500 800 730-3360 1400 490 400 974 1760 86 355 10 80 4A BC-65PF 164J1 6500 800 730-3360 1600 490 400 974 1830 34 348 10 80 4A Two hydraulic functions. Special opening ranges, arm lengths and arm finishes on request. External sideshift available. Independent arm movement extra. Please see page -16. -5

Pulp Bale Clamps s P Heavy-duty pulp-bale clamp. Bolted pulp-bale arms. Left arm pivoted. Colourless arm finish. Slim and strong arm design ensures easy knifing and tight stacking. Built-in integral sideshift improves positioning. Arm Length Arm B L N C D HCG VCG LL H ISO kg mm mm mm mm mm mm kg mm mm mm mm 38 P-800-S 8000 800 600-3060 1400 560 400 980 755 54 90 1600 850 351 90 P-800 8000 800 700-360 1400 560 400 980 765 53 90 1600 850 350 90 P-800-L 8000 800 600-3460 1400 560 800 980 880 45 90 1600 965 339 90 P-800-LS 8000 800 700-3660 1400 560 800 980 910 43 90 1600 995 336 90 P-800-LT 8000 800 600-3860 1400 560 300 980 3065 34 90 1600 3150 34 90 P-800-LU 8000 800 700-4060 1400 560 300 980 3090 3 90 1600 3175 30 90 P-1000 10000 800 730-360 1400 55 400 1090 3060 343 305 1600 3090 354 305 P-1000-L 10000 800 730-3660 1400 55 800 1090 34 330 305 1600 354 339 305 P-1000-LS 10000 800 730-4060 1400 55 300 1090 3415 316 305 1600 3450 35 305 P-1000-LT 10000 800 1100-4900 1400 55 3600 1090 3610 305 305 1600 3660 315 305 P-100-LE 1000 800 x[800-900] 1600 55 450 980 3900 310 90 Price Two hydraulic functions. Special opening ranges, arm lengths and arm finishes on request. External sideshift available. Independent arm movement extra. Please see page -15. Arm lengths 100 mm or greater, left arm is pivoted. Consult Bolzoni Auramo regarding factory specifications. See page -16 for special mountings. These clamps (P-100LE) have a center arm. Internal sideshift is not available. -6

Pulp Bale Clamps s N Heavy-duty, pivoted arm, pulp-bale clamp designed to handle to 8 pulp-bale units. Open-frame design gives excellent visibility. Articulated arm design reduces overall clamp weight. Special pulp-bale arms. Colourless arm finish. Arm Length Arm B L N C D HCG VCG LL H ISO kg mm mm mm mm mm mm kg mm mm mm mm 38 N-1000-S 10000 800 *[800-000] 1400/1600 450/550 300 1550 1900 310 50 N-1000-S 10000 800 *[800-000] 1600/1700 450/550 300 1550 1950 330 N-1000 10000 800 *[1000-500] 1400/1600 450/550 4000 1550 100 95 50 N-1000 10000 800 *[1000-500] 1600/1700 450/550 4000 1550 150 315 N-1000-L 10000 800 *[1500-3000] 1400/1600 450/550 4900 1550 50 80 50 N-1000-L 10000 800 *[1500-3000] 1600/1700 450/550 4900 1550 300 300 N-1300-S 13000 800 *[1600-3100] 1400/1600 500/550 5100 1670 3000 330 300 N-1300-S 13000 800 *[1600-3100] 1600/1700 500/550 5100 1670 3100 350 N-1300 13000 800 *[000-3600] 1400/1600 500/550 5600 1670 300 350 300 N-1300 13000 800 *[000-3600] 1600/1700 500/550 5600 1670 3300 370 N-1600 16000 800 *[100-3800] 1600/1700 550/750 6700 1790 5100 340 350 Special opening ranges, arm lengths and arm finishes on request. Consult Bolzoni Auramo regarding factory specifications. Special mounting required, see page -16. -7

Waste Paper Bale Clamps s KS-W Strong double T-profile frame. Designed to specifically handle waste paper bales, it is also used to handle plastic and recicling materials. Excellent lateral visibility through the clamping arms. Slim arms for easy knifing between bale stacks. Reduced weight, effective thickness and centre of gravity. Wear bars to protect the frame and the arms. Integral sideshift to best position the load. Arm Dimensions Minimum Carriage Width Q BP B LxAxExT I FL D W HCG VCG LL U P C ISO kg mm mm mm mm mm mm kg mm mm mm mm mm mm 38 KS 18 W4A 64-197 1800 600 640-1970 1000x400x30x45 970 750 604 364 41 46 11 338 9 3 A KS 18 W6A 64-197 1800 600 640-1970 100x400x30x45 970 750 604 389 310 38 11 338 9 9 A KS 18 W8A 64-197 1800 600 640-1970 1600x400x35x45 970 750 604 460 350 8 11 338 9 39 A KS 3 W4B 50-185 300 600 500-1850 1000x450x40x65 100 850 713 655 68 34 144 363 9 18 3 A KS 3 W6B 50-185 300 600 500-1850 100x450x40x65 100 850 713 685 38 6 144 363 9 3 A KS 3 W4B 5-197 300 600 50-1970 1000x450x40x65 180 850 713 670 68 34 144 363 9 18 3 A KS 3 W6B 5-197 300 600 50-1970 100x450x40x65 180 850 713 700 38 6 144 363 9 3 A KS 3 W4B 61-15 300 600 610-150 1000x450x40x65 180 850 713 67 68 34 144 363 9 18 3 A KS 3 W6B 61-15 300 600 610-150 100x450x40x65 180 850 713 70 38 6 144 363 9 3 A KS 3 W4B 65-38 300 600 650-380 1000x450x40x65 140 850 713 685 68 34 144 363 9 18 3 A KS 3 W6B 65-38 300 600 650-380 100x450x40x65 140 850 713 715 38 6 144 363 9 3 A KS 3 W8B 65-38 300 600 650-380 1500x450x45x65 140 850 713 800 40 5 144 363 9 30 3 A KS 40 W4B 53-198 4000 600 530-1980 1000x450x40x65 150 1050 780 690 83 6 150 375 0 18 3 A KS 40 W6B 53-198 4000 600 530-1980 100x450x40x65 150 1050 780 745 343 54 150 375 0 3 A KS 40 W4B 59-13 4000 600 590-130 1000x450x40x65 180 1050 780 695 83 6 150 375 0 18 3 A KS 40 W6B 59-13 4000 600 590-130 100x450x40x65 180 1050 780 750 343 54 150 375 0 3 A KS 40 W4B 60-37 4000 600 600-370 1000x450x40x65 1500 1050 780 730 71 65 150 375 0 18 3 A KS 40 W6B 60-37 4000 600 600-370 100x450x40x65 1500 1050 780 785 39 57 150 375 0 3 A KS 40 W8B 60-37 4000 600 600-370 1500x450x45x65 1500 1050 780 955 46 46 150 375 0 30 3 A KS 40 W9B 60-37 4000 600 600-370 1700x450x45x65 1500 1050 780 1016 501 48 150 375 0 37 3 A KS 40 W4B 76-66 4000 600 760-660 1000x450x40x65 1590 1050 780 760 63 67 150 375 0 18 3 A KS 40 W6B 76-66 4000 600 760-660 100x450x40x65 1590 1050 780 815 319 59 150 375 0 3 A KS 40 W8B 76-66 4000 600 760-660 1500x450x45x65 1590 1050 780 985 451 48 150 375 0 30 3 A KS 40 W9B 76-66 4000 600 760-660 1700x450x45x65 1590 1050 780 1076 51 50 150 375 0 37 3 A Side Visibility Ground Clearance Arm Toe-in Notes: E= arm thickness, without rib. T= arm thickness at the base, without rib. Standard fittings: Integral sideshift. Pressure relief valve. Arms welded directly to the guides. Check valve. On request: Separate sideshift. Special openings. Pressure gauge. Load backrest. Independent arm control valve. Arms of various dimensions. -8

Waste Paper Bale Clamps s B-PU Bale clamp for handling waste paper bales. Aluminium profile frame, strong T-profile arm carriers. Bale arms bolted to the arm carriers. Slim and strong arm design ensures easy knifing and tight stacking. Built-in integral sideshift improves positioning. Arm Length Arm B L N C D HCG VCG LL H ISO kg mm mm mm mm mm mm kg mm mm mm mm 38 B-400PU 1RH1 4000 800 610-190 100 445 1400 85 105 79 x 37 74 3A/4A B-400PU 14RH1 4000 800 610-170 1400 445 1400 85 1080 31 x 37 74 3A/4A B-400PU 16RH1 4000 800 610-160 1600 445 1400 85 1140 394 x 37 74 3A/4A B-400PU 1RJ1 4000 800 710-390 100 445 1400 85 1045 76 x 37 74 3A/4A B-400PU 14RJ1 4000 800 710-370 1400 445 1400 85 1100 317 x 37 74 3A/4A B-400PU 16RJ1 4000 800 710-360 1600 445 1400 85 1160 390 x 37 74 3A/4A B-400PU 1TH1 4000 800 610-390 100 445 1600 85 1050 73 x 37 74 3A/4A B-400PU 14TH1 4000 800 610-370 1400 445 1600 85 1100 314 x 37 74 3A/4A B-400PU 16TH1 4000 800 610-360 1600 445 1600 85 1165 387 x 37 74 3A/4A B-400PU 1TJ1 4000 800 710-590 100 445 1600 85 1070 70 x 37 74 3A/4A B-400PU 14TJ1 4000 800 710-570 1400 445 1600 85 110 311 x 37 74 3A/4A B-400PU 16TJ1 4000 800 710-560 1600 445 1600 85 1185 38 x 37 74 3A/4A B-400PU 1VH1 4000 800 610-590 100 445 1800 85 1090 64 x 37 74 3A/4A B-400PU 14VH1 4000 800 610-570 1400 445 1800 85 1140 304 x 37 74 3A/4A B-400PU 16VH1 4000 800 610-560 1600 445 1800 85 110 374 x 37 74 3A/4A B-400PU 1VJ1 4000 800 710-790 100 445 1800 85 1110 61 x 37 74 3A/4A B-400PU 14VJ1 4000 800 710-770 1400 445 1800 85 1165 301 x 37 74 3A/4A B-400PU 16VJ1 4000 800 710-760 1600 445 1800 85 130 370 x 37 74 3A/4A Two hydraulic functions. Special opening ranges, arm lengths and arm finishes on request. Please see page -16. -9

Waste Paper Bale Clamps s BC-PW Bale clamp for handling waste paper bales Colourless arms welded directly to the arm carriers Extremely thin and light design with optimal visibility Steel profile frame, strong T-profile arm carriers Both arms fixed Slim arm design Wear strips placed in the lower part of the frame and the arms Built-in integral sideshift Arm Length Arm B L N C D HCG VCG LL H ISO kg mm mm mm mm mm mm kg mm mm mm mm 38 BC-50PW 1TH1 5000 800 630-360 100 490 1600 874 140 79 316 190 95 4A BC-50PW 14TH1 5000 800 630-360 1400 490 1600 874 195 30 310 190 95 4A BC-50PW 16TH1 5000 800 630-360 1600 490 1600 874 1360 367 31 190 95 4A BC-50PW 1TJ1 5000 800 730-560 100 490 1600 874 165 76 317 190 95 4A BC-50PW 14TJ1 5000 800 730-560 1400 490 1600 874 130 317 311 190 95 4A BC-50PW 16TJ1 5000 800 730-560 1600 490 1600 874 1385 363 304 190 95 4A BC-50PW 1VH1 5000 800 630-560 100 490 1800 874 175 73 317 190 95 4A BC-50PW 14VH1 5000 800 630-560 1400 490 1800 874 1330 313 311 190 95 4A BC-50PW 16VH1 5000 800 630-560 1600 490 1800 874 1395 359 305 190 95 4A BC-50PW 1VJ1 5000 800 730-760 100 490 1800 874 1300 70 318 190 95 4A BC-50PW 14VJ1 5000 800 730-760 1400 490 1800 874 1355 310 31 190 95 4A BC-50PW 16VJ1 5000 800 730-760 1600 490 1800 874 140 355 306 190 95 4A BC-65PW 1H1 6500 800 630-960 100 490 00 974 1590 54 364 10 95 4A BC-65PW 14H1 6500 800 630-960 1400 490 00 974 1650 88 357 10 95 4A BC-65PW 16H1 6500 800 630-960 1600 490 00 974 170 37 350 10 95 4A BC-65PW 1J1 6500 800 730-3160 100 490 00 974 165 51 365 10 95 4A BC-65PW 14J1 6500 800 730-3160 1400 490 00 974 1680 85 358 10 95 4A BC-65PW 16J1 6500 800 730-3160 1600 490 00 974 1750 34 351 10 95 4A BC-65PW 14H1 6500 800 630-3160 100 490 400 974 1640 48 363 10 95 4A BC-65PW 144H1 6500 800 630-3160 1400 490 400 974 1700 8 356 10 95 4A BC-65PW 164H1 6500 800 630-3160 1600 490 400 974 1770 30 349 10 95 4A BC-65PW 14J1 6500 800 730-3360 100 490 400 974 1675 46 364 10 95 4A BC-65PW 144J1 6500 800 730-3360 1400 490 400 974 1730 79 357 10 95 4A BC-65PW 164J1 6500 800 730-3360 1600 490 400 974 1800 317 350 10 95 4A Two hydraulic functions. Special opening ranges, arm lengths and arm finishes on request. External sideshift available. Independent arm movement extra. Please see page -16. Consult Bolzoni Auramo -10

360 Rotating Bale Clamps s KG-G Strong double T-profile frame. 360 continuous rotation in both directions. Slim arms for easy knifing between bale stacks. Reduced weight, effective thickness and centre of gravity. Excellent visibility. Arm Dimensions Minimum Carriage Width Q BP B LxAxExT I FL D1 W HCG VCG LL U V P C ISO kg mm mm mm mm mm mm kg mm mm mm mm mm mm mm 38 KG 10 GA 58-181 1000 500 580-1810 700x400x5x45 930 750 780 466 193 67 8 343 0 9 15 A KG 10 G4A 58-181 1000 500 580-1810 1000x400x30x45 930 750 780 493 06 6 8 343 0 9 3 A KG 10 G6A 58-181 1000 500 580-1810 100x400x30x45 930 750 780 511 14 58 8 343 0 9 9 A KG 14 GA 58-181 1400 500 580-1810 700x400x5x45 930 750 780 468 188 67 8 341 00 9 15 A KG 14 G4A 58-181 1400 500 580-1810 1000x400x30x45 930 750 780 5 6 59 8 341 00 9 3 A KG 14 G6A 58-181 1400 500 580-1810 100x400x30x45 930 750 780 540 34 55 8 341 00 9 9 A KG 18 G4A 64-197 1800 500 640-1970 1000x400x30x45 970 750 780 555 51 54 38 340 197 9 3 A KG 18 G6A 64-197 1800 500 640-1970 100x400x30x45 970 750 780 577 84 51 38 340 197 9 9 A KG 18 G8A 64-197 1800 500 640-1970 1600x400x35x45 970 750 780 604 317 48 38 340 197 9 39 A KG G4A 64-197 00 500 640-1970 1000x400x30x45 970 750 780 561 51 54 38 338 195 9 3 A KG G6A 64-197 00 500 640-1970 100x400x30x45 970 750 780 584 84 51 38 338 195 9 9 A KG G8A 64-197 00 500 640-1970 1600x400x35x45 970 750 780 604 317 48 38 338 195 9 39 A KG 5 G4B 64-37 500 500 640-370 1000x400x30x45 1370 750 911 7 304 319 63 383 40 0 3 3 A KG 5 G6B 64-37 500 500 640-370 100x400x30x45 1370 750 911 748 364 316 63 383 40 0 9 3 A KG 5 GXB 64-37 500 500 640-370 1600x400x35x45 1370 750 911 803 48 313 63 383 40 0 39 3 A KG 3 G4B 50-185 300 500 500-1850 1000x450x40x65 100 96 905 308 44 78 363-9 18 /3 A KG 3 G6B 50-185 300 500 500-1850 100x450x40x65 100 96 935 359 37 78 363-9 /3 A KG 3 G4B 5-197 300 500 50-1970 1000x450x40x65 180 96 90 308 44 78 363-9 18 /3 A KG 3 G6B 5-197 300 500 50-1970 100x450x40x65 180 96 950 359 37 78 363-9 /3 A KG 3 G4B 61-15 300 500 610-150 1000x450x40x65 180 96 9 308 44 78 363-9 18 /3 A KG 3 G6B 61-15 300 500 610-150 100x450x40x65 180 96 95 359 37 78 363-9 /3 A KG 3 G4B 65-38 300 500 650-380 1000x450x40x65 1370 96 935 308 44 78 363-9 18 /3 A KG 3 G6B 65-38 300 500 650-380 100x450x40x65 1370 96 965 359 37 78 363-9 /3 A KG 3 G8B 65-38 300 500 650-380 1600x450x40x65 1370 96 1060 477 8 78 363-9 30 /3 A Side Visibility Central Visibility Ground Clearance Arm Toe-in -11

360 Rotating Bale Clamps s KG-G Arm Dimensions Minimum Carriage Width Q BP B LxAxExT I FL D1 W HCG VCG LL U V P C ISO kg mm mm mm mm mm mm kg mm mm mm mm mm mm mm 38 EUR KG 40 G4B 5-197 4000 500 50-1970 1000x450x40x65 150 1050 96 940 331 65 88 375 04 0 18 3 A KG 40 G6B 5-197 4000 500 50-1970 100x450x40x65 150 1050 96 995 38 58 88 375 04 0 3 A KG 40 G4B 59-13 4000 500 590-130 1000x450x40x65 180 1050 96 945 331 65 88 375 04 0 18 3 A KG 40 G6B 59-13 4000 500 590-130 100x450x40x65 180 1050 96 1000 38 58 88 375 04 0 3 A KG 40 G4B 59-36 4000 500 590-360 1000x450x40x65 1500 1050 96 980 36 67 88 375 04 0 18 3 A KG 40 G6B 59-36 4000 500 590-360 100x450x40x65 1500 1050 96 1035 375 61 88 375 04 0 3 A KG 40 G8B 59-36 4000 500 590-360 1600x450x40x65 1500 1050 96 105 494 5 88 375 04 0 30 3 A KG 40 G4B 75-65 4000 500 750-650 1000x450x40x65 160 1050 96 1010 3 68 88 375 04 0 18 3 A KG 40 G6B 75-65 4000 500 750-650 100x450x40x65 160 1050 96 1065 370 6 88 375 04 0 3 A KG 40 G8B 75-65 4000 500 750-650 1600x450x40x65 160 1050 96 135 487 53 88 375 04 0 30 3 A Side Visibility Central Visibility Ground Clearance Arm Toe-in Notes: 750 mm for ISO 38/A hooking; 850 mm for ISO 38/A hooking. during rotation depends on the clamping pressure and on the load. Standard fittings: Two hydraulic functions required. Double check valve. Arms welded directly to the guides. Pressure relief valve. Rotating centre. On request: Different openings. Load backrest. Pressure gauge. Arms of various dimensions. Separate sideshift. -1

360 Rotating Pulp Bale Clamps s KG-GC I B E LL HCG BP W Q L A The Bolzoni Auramo rotating pulp bale clamp model KG-GC class IV can safely transport various bales of cellulose pulp, cotton, wool and paper, etc. between the thin profile load arms (tight stacking possible) 360 continuous rotation in both directions. Slim arms for easy knifing between bale stacks. Reduced weight, effective thickness and center of gravity. Excellent visibility. Load Center Q BP B LxAxE I W HCG LL kg mm mm mm mm kg mm mm ISO-38 EUR KG 40 6G6C 44-06 4000 600 440-060 100x400x60 1500 1480 340 30 3/4 A KG 40 6G8C 44-06 4000 600 440-060 1500x400x60 1500 1650 80 30 3/4 A Arm Dimensions Frame Center of Gravity Standard fittings: Two hydraulic functions required. Pressure relief valve. Wear-plates under the arms included. Reinforced wide gripping rods on inner arm facing. On request: Other arm dimensions and opening ranges. Various facings of inner arms. Separate sideshift. Solenoid valve. Solenoid valve control kit. Motor and brake protection. Special openings. Pressure gauge. Quick disconnect lower hooks. Bolt-on forks and different forks lengths. -13

Pulp Bale Clamps Waste Paper Bale Clamps Technical Information Oil flow rate recommendations Oil Flow Rate, Clamp Oil Flow Rate, Rotator Minimum Recommended Maximum Minimum Recommended Maximum l/min l/min l/min l/min l/min l/min Non-rotating clamps KB 10-14 1 0 5 - - - KB 16-18- 15 5 30 - - - KB 5 0 30 45 - - - KB 3-40 0 35 50 - - - B 400 50 55 60 - - - BC 60 70 80 - - - P 800 80 90 100 - - - P 1000 100 110 10 - - - P 100 X X X - - - N X X X - - - Rotating clamps KG 10-14 1 0 5 15 5 35 KG 18-15 5 30 5 35 45 KG 5 0 30 45 35 60 75 KG 35-40 0 35 50 35 60 75 KG 40 GC 30 40 50 35 45 55 Hydraulic functions and hydraulic pressure recommendations Clamping Distributor Rotation Distributor Hydraulic Pressure Pressure Pressure Pressure Functions Minimum Maximum Maximum Minimum Maximum Maximum MPa MPa MPa MPa MPa MPa Non-rotating clamps KB 10-14 4,0 16,0 3,0 - - - 1 KB 16-18- 4,5 16,0 3,0 - - - 1 KB 5 5,0 16,0 3,0 - - - 1 KB 3-40 5,0 16,0 3,0 - - - 1 B 400 X 16,0 16,0 - - - BC X 16,0 16,0 - - - P 800 X 14,0 16,0 - - - P 1000 X 14,0 16,0 - - - P 100 X X X - - - N X X X - - - Rotating clamps KG 10-14 4,0 16,0 3,0 10,0 1,0 5,0 KG 18-4,5 16,0 3,0 10,0 1,0 5,0 KG 5 5,0 16,0 3,0 10,0 1,0 5,0 KG 35-40 5,0 16,0 3,0 10,0 1,0 5,0 KG 40 GC 10,0 15,0 3,0 13,0 17,0 5,0 X Consult Bolzoni Auramo for specifications -14

Pulp Bale Clamps Waste Paper Bale Clamps Accessories and Options Sideshift Options Integral Sideshift (Series KB Clamps only) Integral sideshift is actuated by hydraulically moving the clamping arms to the same direction. A special sideshift valve is required as well as one additional hydraulic function from the lift truck hydraulic system. Other technical properties of the clamp remain unchanged. Due to the operation principle, integral sideshift is not possible when the clamping arms are in a totally open Separate Sideshift (Series KB Clamps only) Separate sideshift requires a sideshift device to be mounted to the clamp body. A separate sideshifter provides a fixed amount of sideshift stroke regardless of the clamp opening. This enables faster and safer handling in confined spaces. A Bolzoni Auramo Series AS separate sideshifting mounting replaces the standard clamp mounting hooks and can be directly bolted onto the standard series KB clamps. Series AS sideshifters are light and have a minimized effective thickness. Therefore they ensure maximum lifting capacity for the lift truck. Sideshift stroke 100 + 100 mm. Notes: One hydraulic function is required. Available with lower quick disconnect hooks. or closed position. Under certain conditions a sideshift exceeding ± 100 mm may be possible. Clamp models KB (all models) B (all models) BA (all models) P (all models) Minimum Carriage Width Q BP I D HCG FL W LL P F G X Y Z ISO kg mm mm mm mm mm kg mm mm mm mm mm mm mm 38 For Parallel Clamps AS KXA 00 500 780 586 5 960 4 34 9 960 700 176 30 113 A AS KNA 00 500 980 586 5 1100 4 34 9 1060 900 176 30 113 A AS 8 KXB 800 500 835 715 6 1050 37 43 0 100 740 196 37 147 3 A AS 40 KXB 4000 500 1040 715 5 100 44 43 0 100 1060 196 37 147 3 A Ground Clearance Upper Hook Width Ext. Lower Hook Width Lower Hook Width Rear Body Protrusion Cylinder Body Oil flow L/min Oil pressure MPa Hydraulic Functions Min Recom- Max Min Max Max to mended distributor AS 4 10 15 1.0.0 5.0 1 AS 8-40 6 1 0 1.0.0 5.0 1 Separate Sideshift (series KG clamps only) Consult Bolzoni Auramo regarding technical specifications. ISO 38 1 ISO 38 ISO 38 3-15

General Options Special opening ranges Special frame widths Special arm lengths Special arm heights Bolt-on arms Load backrest Special Ribs Dimples (Westwood-Version) Special wear bars Quick-Change Arms Quick-change arms enable fast and easy arm change. The clamp body can be used with several sets of different arms. The arm carriers and arms are fitted with special patented dove tail slides, which enable a simple arm change by simply slipping the arms off from the clamp body. Consult Bolzoni Auramo for technical specifications. Clamp body KB 10-14 KB 16-18--5 KB 3-40 Options Non-standard or special mountings are not included in the attachment price. All mounting prices are add-on prices. For non-standard mounting, detailed information is required from customer. ISO 38, B On request Quick-Change ISO 38 Lower Hooks Series KB / KG ISO 38 /3 Series B / BA / BP ISO 38 3/4 Non-standard mounting class ISO 38 -> 3 ISO 38 3 -> 4 ISO 38 -> 3 (QC) ISO 38 3 -> 4 (QC) Pin-Type mounting On request On request Lift truck capacity up to 7500 kg over 7500 kg Pulp Bale Clamps Waste Paper Bale Clamps Accessories and Options Terminal West mounting On request Integral mounting On request Wheel loader mountings adapters for wheel loader use. On request Hydraulic Options Hydraulic Couplings On request Installation Kit (Connection Hoses) On request Pressure relief valve Pressure relief valve for one hydraulic function. Choose this option if the lift truck hydraulic pressure exceeds the maximum connection pressure of the attachment. Number B, BA, P Independent arm control valve In some cases the arms must be capable of moving independently; this can be made possible by a special valve. KB B, BA, P Flow divider valve for synchronized arm movement Equal arm movement during clamping or opening. Provides equal oil flow to the clamping cylinders. On request Pressure gauge KB -16