Heavy Duty Vertical s Great for aluminum trailers Heavy duty 1/4 steel brackets are hot dip galvanized for lasting corrosion protection 1/4 heavy duty steel, 5 wide Four different heights to work with your application 5 x 10 x 1/4 ngle: 90º Part #44091G Part #44091G Part #44037G 90º 90º 95º 85º 5 x 8 x 1/4 ngle: 90º Part #44090G 0.813 1.100 1.030 9/16 Dia. 0.750 95 10.00 0.25 R. 5 x 6.81 x 1/4 ngle: 95º Part #44037G 6.813 10.000 Part #44090G Part #44036G #44037G & #44036G Shown together 6.625 5 x 6.62 x 1/4 ngle: 85º Part #44036G 0.750 8.00 0.25 R. 0.813 1.100 1.030 85 9/16 Dia. 8.0 51
s Keel Roller 12.23" djustable offset brackets mount on tongue for keel support. ssembled version comes complete with 4" rubber roller (for wide tongue) and hardware as shown. s are made out of 3/16 material. 1.5" Part #44017 - left and right brackets only Part #86121 - ssembled- with roller, shaft, nuts and bolts. (shown assembled right) 800-241-1806 TIE DOWN ENGINEERING Panel Split Panel s Roller Shafts s are one piece, heavy duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Slots accept 7/16" or 1/ diameter bolts and provide vertical roller adjustment. Roller shaft diameter can be 1/ or 5/8". Description (bulk) Zinc Galvanized 1/2 X 5-1/4 Roller Shaft 86035 86176 1/2 X 6-1/4 Roller Shaft 86036 86177 5/8 X 5-1/4 Roller Shaft 86037 86178 5/8 X 6-1/4 Roller Shaft 86038 86179 5/8 X 9-1/4 Roller Shaft 86039 86180 P/N 81235 Name:????? 5/8 X 11-1/4 Roller Shaft 86040 86181 5/8 X 13-1/4 Roller Shaft 86041 86182 5/8 X 15-1/4 Roller Shaft 86042 N/ 5/8 X 19-1/4 Roller Shaft 86043 N/ 6.1 Part # Roller Slot Size 86150 4 3-1/4 4-3/8 7 5-17/32 86151 5 3-1/4 5-3/8 7 5-17/32 86152 8 3-1/4 8-3/8 7 5-17/32 86155 10 3-1/4 10-3/8 7 5-17/32 86153 12 3-1/4 12-3/8 7 5-17/32 3.25" Sold in pairs (right and left) to accommodate any size roller length. Slot allows vertical adjustment for stabilizing boat on trailer. Slots accept 7/16" or 1/ bolts. Use 1/ or 5/8" roller shaft. Sold bulk in pairs. Part # 86140 52 Pal Nuts 1/2 Pal Nuts (50 per box) Part #86300 5/8 Pal Nuts (50 per box) Part #86301
s c a olster s c b Swivel P/N 86116 1.5" 90 unk s a 90 7" olster s 7.5" 8" 3" olster brackets are designed to support bolster or bunk boards. Slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity. 1.7" b Slot Part # Length 86130 8 1-1/16 2-11/16 86131 10 1-1/16 2-11/16 86132 12 1-1/16 2-11/16 86133 24 1-1/16 2-11/16 Use with adjustable bolster brackets for proper angle of bunk or bolster boards. Part # 86115 3-1/2 1-1/4 2 44047* 2-3/4 1-1/4 2 44006 3-3/4 1-1/2 2 * No square center hole Heavy 11 gauge hot dip galvanized steel brackets mount bunks on edge. Slotted for vertical adjustment to standard or deep-v hulls. Slot Part # Length 86125 9-1/2 2 1-1/2 6 86126 12-5/8 2 1-1/2 9-1/8 86149 8 2 1-1/2 4-1/2 Slim design vertical bunk bracket with non-slip dimples. Made from heavy duty 11 ga. steel. Part #44082 The innovative design of this light duty bolster bracket allows for bunk angle adjustment without the use of a swivel bracket. Great for use on PW and skiff trailers. Made from heavy duty 11 ga. steel. Part #44009L Part #44009R olster s Swivel s unk s unk s PW unk s 53
dditional s 4 Frame Tie Down 4" 30 7 ga. bracket for use with ratchet straps Part #44650 Keel 3.063 4.0 11 ga. bracket for use with 3 keel rollers Part #43915 800-241-1806 TIE DOWN ENGINEERING Short Pivot Side Guide.3125 Dia. 23.603 80 12.397.562 x 687 Obr. Tongue Support 4.75 5.125 1.83 24 23.86 3.06 6 25.9 4.599 Pivot bracket made from 1/4 hot dipped galvanized steel. Part #44035 Trailer side guide 24 high. Made from heavy duty 3/8 hot dipped galvanized steel. Part #48065 5400-8400# tongue support bracket. Made from heavy duty 8 ga, hot dipped galvanized steel. Part #43755 54
s Pontoon unk ustomize the look of your pontoon trailer with our versatile pontoon bunk bracket. Made from 11 ga. steel. 6.192 2.75" 8.563 9.752 86134 & 86135 18" or 30" olster s 2.69" 130 D 6" Part # 44012 7 8-3/8 4-11/16 44004 7 8-3/8 6-3/16 Offset Pontoon unk Made from 11 ga. steel Part #44050 Made from 8 ga. steel, can be used with 86136 pivot weldment and 44010 bunk stiffening bars to provide the ultimate load capacity for your trailers. Slot length: 3.06 Part # D 86134 12 1-3/16 3-9/16 11-1/2 86135 10 1-3/16 3-9/16 9-1/2 Made from 8 ga. steel these bunk stiffening bars add hull support were it is needed most. vailable 18 or 30 long. Mount using a 86136 pivot weldment and appropriate height bolster bracket. Part #44010 Stiffening ar 30 Part #44011 Stiffening ar 18 For use with bunk stiffening bars #45010 and #44011. 1/2 Sch 40 pipe welded on 2 x2 x 5 ga. mounting tube. Part #86136 Pivot Weldment Heavy Duty unk unk Stiffening ar Pivot Weldment k Stiffening ar P/N 44010 55
s Tongue Skid 2.0 6.0.4375 Dia. Tongue skid made from heavy duty 5 ga. galvanized steel. Part #46600 ow Guide Weldment 800-241-1806 TIE DOWN ENGINEERING 142 29.75 11 9X2X2 djustable unk ssembly 30 ow Guide Part #48092 Tube base bracket attaches to 2x3 cross member. djustable inner channel has five height settings. 5 and 7 bracket heights available (adjustment down). 6 7.56 7.56 5 djustable unk Part #48121 7 djustable unk Part #48122 7.06 7 djustable unk 56
hannel s ow Guide/Post hannel s hannel, 5 x 5.45, 7 ga. Galvanized Steel Part #48082 2 hannel with Hex, 5 x 5.45, 7 ga. Galvanized Steel Part #48091 1-1/2 hannel with Hex, 5 x 5, 7 ga. Galvanized Steel Part #48094 1/2 Flange Nut Part #10519 Mounting U-olts.562 x.687 Typ. 5.453 2.094 4.203 Flange Nut hannel 3.593.5625 1.968 Trailer Frame.562 x.687 Typ. 5.453 2.093 4.203 Vertical ow Guide Post 1/2 olt.5625 2.1875 Trailer Frame.562 x.687 Typ. 1.625 3.734 4.984 Part #48082 Part #48091 Part #48094.5625 1.87 1.68 57