SMOOTH BORE HOSE FITTINGS R5 / R HOSE AND R05 / R44 HOSE FITTINGS Brass 300 Series Stainless Steel FEATURES Swage or Crimp attachment For use with: R5/R (.030 wall hose) R05/R44 (.040 wall hose) Back-up hex JIC (TK) Attach with TK tooling Titeflex medium pressure smooth bore hose ends may be swaged or crimped. Distributors have the option of using their existing QuikSwage tooling or deploying the TK tooling which will allow them the versatility to attach to both.030 wall (R5/R) and.040 wall (R05/R44) hose types. They also have the option of crimping our hose ends using either the one piece or two piece TK fitting. MALE PIPE MEDIUM PRESSURE PIECE FITTING Y5404T-xxx Y5404-xxx Y5405-xxx Y5406T-xxx Y5406-xxx Y5408T-xxx Y5408-xxx Y540-xxx Y54-xxx Y546-xxx Note the appropriate suffix: -93 = Brass -95 = Stainless Steel JIC FEMALE SWIVEL WITH BACK-UP HEX PIECE FITTING Y54004-xxx Y54005-xxx Y54006-xxx Y54008-xxx Y5400-xxx Y540-xxx Y5406-xxx PIECE FITTING Y54304T-xxx Y54304-xxx Y54305-xxx Y54306T-xxx Y54306-xxx Y54308T-xxx Y54308-xxx Y5430-xxx Y543-xxx Y5436-xxx -93 = Brass with QuikSwage Collar -95 = Stainless with QuikSwage Collar PIECE FITTING Y5404-xxx Y5405-xxx Y5406-xxx Y5408-xxx Y540-xxx Y54-xxx Y546-xxx /4 /4 5/6 / / /4 5/6 / /8 7 /4 8 /4 8 /4 8 8 8 / 4 / 4 4 -/ 7/6 0 / 0 9/6 8 6 7/8 4 -/6-5/6 I.D..56.56.07.77.77.469.594.8 I.D..56.07.77.469.594.8 Note the appropriate suffix: -93 = Brass -95 = Stainless Steel -93 = Brass with QuikSwage Collar -95 = Stainless with QuikSwage Collar
SMOOTH BORE HOSE FITTINGS R5 / R HOSE FITTINGS COMPRESSION TUBE END NOTE: Compression tube end inserts are type 36SST Y53604- Y53606- Y53608- Y536- Y5366- /4 / /4" O.D. Tube " O.D. Tube /" O.D. Tube " O.D. Tube " O.D. Tube.56.77.594.8 SAE - FEMALE SWIVEL - STRAIGHT (45 SEAT) (UNIVERSAL) BRASS Y50706-0-93 FEMALE PIPE Y5305-95 8.77 BRASS Y5305-93 SANITARY TRI CLAMP Y56-4 HOSE SIZE, IN. 5/6 /4 8.07 FACE DIAMETER.984.8 MEDIUM PRESSURE
SMOOTH BORE PTFE HOSE UNI-BRAID HOSE FITTINGS JIC-FEMALE SWIVEL (37 SEAT) Y40004-7 Y40006-7 Y40008-7 Y4000-7 Y400-7 Y4006-7 Y4000-7 Y4004-7 /4 / -/4 -/ 7/6 0 9/6 8 6 7/8 4 /6-5/6 - -7/8 ADAPTER MALE JIC TO MALE PIPE 94364SS-4 94364SS-4-4 94364SS-6 94364SS-6-6 94364SS-8 94364SS-8-8 94364SS-0 94364SS-0-6 94364SS- 94364SS-6 94364SS-0 94364SS-4 /8 7 /4 8 /4 8 8 8 / 4 / 4 8 4 -/ /4 -/ -/ -/ 7/6 0 7/6 0 9/6 8 9/6 8 6 6 7/8 4 7/8 4 /6-5/6 - - 7/8.46.7.365.455.568.778.964.87.7.7.97.97.390.390.484.484.609.844.078.33 HIGH PRESSURE WARNING: Careful selection, proper assembly and use of hose fittings is essential for safe and warranted operation of the hose assembly.
SMOOTH BORE PTFE HOSE R57 / R54 HOSE FITTINGS R57 HOSE FITTINGS R57 hose fittings utilize the exclusive Titeflex progressive swaging method of attachment; with positive braid lock to assure a permanent, leak-proof assembly. All JIC wetted surfaces are type 3 stainless steel; other parts are type 304. R57 JIC - FEMALE SWIVEL (37 SEAT) R54 HOSE FITTINGS R54 hose fittings also utilize the exclusive Titeflex progressive swaging method of attachment; with positive braid lock. Y40004- Y40006- Y40008- Y4000- Y400- Y4006- /4 / 7/6 0 9/6 8 6 7/8 4 -/6-5/6 R54 JIC - FEMALE SWIVEL (37 SEAT) Y40004-4 Y40006-4 Y40008-4 /4 / 7/6 0 9/6 8 6.46.7.365.455.568.778 All JIC wetted surfaces are type 3 stainless steel; other parts are type 304..46.7.365 HIGH PERFORMANCE WARNING: Careful selection, proper assembly and use of hose fittings is essential for safe and warranted operation of the hose assembly.
FLEXIBLE PTFE HOSE R7 / R76 AND R85 / R87 HOSE FITTINGS Our selection of fittings enhances the value, the areas of application and convenience of Titeflex convoluted hose. With these fittings. most installation needs are easily met. Please consult us for any designs not pictured here. Convoluted hose fittings feature the exclusive Titeflex progressive swaging method of attachment. The innercore and insert form a permanent, leak proof assembly. The positive braid lock assures that strain is absorbed by the braid, not the hose innercore, ensuring hose integrity. CRIMP ATTACHMENT Hose may be crimped using numerous standard hose crimping machines. For information on this alternate method of attachment, please consult us. Male pipe and female inserts are available in carbon steel and type 36 stainless steel. Collars for the preceding fittings are either carbon steel or type 304 stainless steel. Note: Carbon steel collars may be specified with stainless steel inserts, where only wetted surfaces require corrosion resistance. Butt weld end fittings are type 36 stainless steel. AVAILABILITY Convoluted hose assemblies can be fabricated by Titeflex or Authorized Titeflex Distributors. To assure factory-made reliability for distributor assemblies, our distributors are equipped with Titeflex-designed and approved field swaging tools. MALE PIPE CONVOLUTED Y53308-00 Y533-00 Y5336-00 Y5330-00 Y5334-00 Y5333-00 CARBON STEEL Y53308-0 Y533-0 Y5336-0 Y5330-0 Y5334-0 Y5333-0 / -/4 -/ JIC - FEMALE SWIVEL (37 SEAT) Y53508-00 Y535-00 Y5356-00 Y5350-00 Y5354-00 Y5353-00 CARBON STEEL Y53508-0 Y535-0 Y5356-0 Y5350-0 Y5354-0 Y5353-0 SANITARY FITTING Y56-3 Y54-3 Y53-3 -/ / -/4 -/ / 4 4 -/ -/4 -/ -/ -/ -/ 6 -/6-5/6 - -7/8 -/ FACE DIAMETER.984.984.56.378.630.849.069.306.756.378.630.849.070.305.755.847.30.756 BUTT WELD END (CONTAINS VICTAULIC* GROOVE) Y5556-90 Y5554-90 Y5553-90 -/.84.74.784 For carbon steel collar use -96. * Victaulic Company of America registered trademark
FLEXIBLE PTFE HOSE R7 / R76 AND R85 / R87 HOSE FITTINGS Titeflex s Tefzel encapsulated flange retaining inserts are now available in ", -/" and "sizes. These fittings are manufactured using a base insert of nickel plated carbon steel. The Tefzel compound is injection molded around this base insert at high pressure. This high pressure injection molding results in a tough zero porosity plastic encapsulation which is highly corrosion resistant. The wall thickness on all wetted surfaces of the flange retaining insert is a minimum of.060". Dependent on media, temperature capability of the encapsulated stub end is 50 F. Consult factory for detailed information on fluid capability and temperature rating. Flange retaining inserts are available in type 36 stainless steel, or with Halar coating. Tefzel encapsulated flange retaining inserts are available with a base material of nickel plated carbon steel. Collars for all styles are available in either type 304 stainless steel or carbon steel. FLANGE RETAINING INSERT TEFZEL ENCAPSULATED TEFZEL ENCAPSULATED COLLAR Y5346-97H Y5344-97H Y5343-97H TEFZEL ENCAPSULATED CARBON STEEL COLLAR Y5346-9H Y5344-9H Y5343-9H FLANGE RETAINING INSERTS: & HALAR COATED INSERT & COLLAR Y534-90 Y5346-00 Y5344-00 Y5343-00 HALAR COATED INSERT & COLLAR Y534-90T SEE ABOVE SEE ABOVE SEE ABOVE -/ -/.740.30.706.630.84.74.784 CONVOLUTED