581 Double Hung Features Windows 581 Double Hung The series 581 double hung window offers superb ventilation control and easy, rattle free operation. Whether renovating your existing home or building a new home, traditionally styled Double Hung windows offer a great solution in window design. Interchangeable couplers range from domestic to light commercial applications Full perimeter weatherpile minimises draughts Concealed spring balances, virtually eliminates rattling and sash sloppiness common with spiral type windows Sashes pass for easy cleaning from inside Cam handle with safety sash lock Designed to comply with the requirements of Australian Standard AS2047-1999 Options Cavity brick frame options available Keyed locks Federation outer frame Couplers to suit 90, 135 and 180 degree adaption Single glazed up to 6.38mm laminated glass Limitations Max 2100mm height of D/H window (limited by spring length) Max 1200mm wide Max 16kg sash weight (2100mm x 900mm window with 6mm glass) RTDH581.01 April 2000 WS-25
Windows Product Performance Data Structural performance NATA report: 9915S4A (2030mm x 910mm, type D sample) Housing (span/150): Serviceability limit state: +1500 Pa (span/190); -1500 Pa (span/222) Ultimate strength: ±2300 Pa Residential (span/180) Serviceability limit state: +1500 Pa (span/190); -1500 Pa (span/222) Ultimate strength: ±2300 Pa Water penetration: 200 Pa Air infiltration: +75 Pa: 4.56 +150 Pa: 5.66 Operating force: initiate movement: 82.6N (worst measurement) maintain movement: 115.6N (worst measurement) Acoustic performance ATF report: 1141 (1200mm x 1810mm sample, type DF 6.38mm glass) STC: 31 OITC: 28 Rw = 31 CT = -1 CTR = -1 CT (50-5000) = 0 CTR (50-5000) = -2 Rw (CT; CTR)= 31(-1;-1) Rw (CT; CTR; CT (50-5000); CTR (50-5000)) = 31(-1; -1; 0; -2) Energy performance Note: 1. Subscript 'w' refers to whole-window properties, which apply to all parameters except the damage-weighted fading transmittance, Tdw. Uw is the whole-window U-value. SHGCw is the whole-window solar heat gain coefficient. Tvw is the whole-window visible (light) transmittance. 2. Percentage improvement figures are compared with using base-case Generic Window 1 (3mm clear in std aluminium frame). 3. A negative percentage improvement figure indicates performance worse than the base-case window and a positive percentage improvement figure indicates performance better than the base-case window. 4. Maximum air infiltration is 0.5 L/s.m2 at a positive pressure difference of 75 Pa as measured according to AS 2047. 5. Static performance (Uw, SHGCw, Tvw, Tdw) calculated using Window 4.1 and Therm 2.1 software (Lawrence Berkeley National Laboratory), 2000-2001. 6. Annual energy performance (stars and % improvements) calculated using Nationwide House Energy Rating Software (NatHERS) according to procedures of WERS 2000 (Australasian Window Council), www.wers.net. 581I 2 July 2002
Half size sections Windows 581I 3
Windows Hardware M029737 25 x 6 Pan HD Frame Screw M029659MF Rivet 4.8 x 3.2 M027229 3mm G/Channel M027235 4-5mm G/Channel 100m roll M027246 6mm G/Channel 100m roll M027103 Glazing Wedge 7 Gap 100m roll M027104 Glazing Wedge 8 Gap 150m roll M027257 Single sided tape 9 x 1.6 M027314 Bulbseal 6mm M027105 Glazing Wedge 9.5 Gap 150m roll M027409 Sill Flashing M028259 15 x Pan HD M027248 Hi-Fin Weatherpile 500m roll M027243 Spring Cover 4m long M028378 Lock Washer 3 / 16 M028752 10 x 8 Pan HD M571100 Friction Shoe LH M029697 15 x 6 Csk HD M571101 Friction Shoe RH M029672 12 x 6 Pan HD M571102 Spring Fixing Block M571103 Spring Eye Adaptor M571121 Flyscreen Hook M571125 Sash Guide M571153 Spring Package 0.81g x 405mm M571158 Spring Package 0.91g x 779mm M571163 Spring Package 1.02g x 779mm M571169 Spring Package 1.02g x 629mm M571171 Spring Package 1.12g x 929mm M571172 Spring Package 1.25g x 929mm M585072 Sash Stop M016CASECLIPCLR Casement Clip 1.6mm MSSS276617 Cam Handle Package M580251 Transom Plug 581I 4 Capral Aluminium. Limited
Configurations and recommended maximum sizes Windows 581I 5
Windows Configurations and recommended maximum sizes (cont) 581I 6 Capral Aluminium. Limited
Half size assembly Windows 581I 7
Windows Half size assembly (cont) 581I 8 Capral Aluminium. Limited
Half size assembly (cont) Windows 581I 9
Windows Half size assembly (cont) 581I 10 Capral Aluminium. Limited
Flyscreen details Windows 581I 11
Windows Structural tables Type D R=Residential l/180 H=Housing l/150 Meeting Stile Wind Pressure Serviceability Limit State kpa Window size Mullion Type 1 HxW(mm) 900 x 610 900 x 910 900x1210 1000 x 610 1000 x 910 1000 x 1210 1200 x 610 1200 x 910 1200 x 1210 1370 x 610 1370 x 910 1370 x 1210 Wind Pressure Serviceability Limit State kpa Window size HxW(mm) Mullion Type 1 R 5.000 R 5.000 1500 x 610 H 3.000 / N4 H 3.000 / N4 R 2.038 R 1.529 1500 x 910 H 2.446 / N4 H 1.835 / N4 R.781 R.526 1500 x 1210 H.937 / N2 H.631 / N1 R 5.000 R 5.000 1860 x 610 H 3.000 / N4 H 3.000 / N4 R 1.887 R 1.503 1860 x 910 H 2.264 / N4 H 1.803 / N4 R.713 R - 1860 x 1210 H.856 / N2 H.564 / N1 R 5.000 R 5.000 2030 x 610 H 3.000 / N4 H 3.000 / N4 R 1.681 R 1.503 2030 x 910 H 2.017 / N4 H 1.803 / N4 R.615 R - 2030 x 1210 H.738 / N2 H.548 / N1 R 5.000 H 3.000 / N4 R 1.576 H 1.891 / N4 R.558 H.670 / N1 Note: These tables are based on theoretical section properties, not on approved tests as specified by AS2047 The N values in the above table represent the complete window rating based on NATA test reports, structural calculations and reinterpreted data from NATA test reports. Residential (R) is limited to 5.000 kpa Housing (H) is limited to 3.000 kpa 581I 12 Capral Aluminium. Limited
Structural tables (cont) Windows Type DD R=Residential l/180 H=Housing l/150 Mullion type 1 Italics represent Deflection limited by Mullion Wind Pressure Serviceability Limit State kpa Window size Mullion Type 1 HxW(mm) 900 x 1510 900 x 1810 900x2110 900 x 2410 1000 x 1510 1000 x 1810 1000 x 2110 1000 x 2410 1200 x 1510 1200 x 1810 1200 x 2110 1200 x 2410 1370 x 1510 1370 x 1810 1370 x 2110 1370 x 2410 Wind Pressure Serviceability Limit State kpa Window size HxW(mm) Mullion Type 1 R 3.959 R 1.324 1500 x 1510 H 3.000 / N4 H 1.589 /N4 R 2.078 R 1.158 1500 x 1810 H 2.493 / N4 H 1.390 /N3 R 1.231 R.865 1500 x 2110 H 1.477 / N3 H 1.038 / N3 R.791 R.534 1500 x 2410 H.949 / N2 H.640 / N1 R 3.721 R.669 1860 x 1510 H 3.000 / N4 H.803 /N2 R 1.924 R.575 1860 x 1810 H 2.309 / N4 H.690 /N1 R 1.130 R.512 1860 x 2110 H 1.357 / N3 H.614 /N1 R.723 R - 1860 x 2410 H.867 / N2 H.561 /N1 R 2.749 R.509 2030 x 1510 H 3.000 /N4 H.611 /N1 R 1.715 R - 2030 x 1810 H 2.058 / N4 H.523 /N1 R.988 R - 2030 x 2110 H 1.185 / N3 H - R.624 R - 2030 x 2410 H.749 / N2 H - R 1.775 H 2.130 /N4 R 1.568 H 1.882 /N4 R.908 H 1.089 / N3 R.566 H.680 / N1 Note: These tables are based on theoretical section properties, not on approved tests as specified by AS2047 The N values in the above table represent the complete window rating based on NATA test reports, structural calculations and reinterpreted data from NATA test reports. Residential (R) is limited to 5.000 kpa Housing (H) is limited to 3.000 kpa 581I 13
Windows Structural tables (cont) Type DF R=Residential l/180 H=Housing l/150 Mullion type 1 Italics represent Deflection limited by Mullion Wind Pressure Serviceability Limit State kpa Window size Mullion Type 1 HxW(mm) 900x1510 900x1810 900 x 2110 900x2410 1000 x 1510 1000 x 1810 1000 x 2110 1000 x 2410 1200 x 1510 1200 x 1810 1200 x 2110 1200 x 2410 Wind Pressure Serviceability Limit State kpa Window size HxW(mm) Mullion Type 1 R 3.959 R 2.011 1370 x 1510 H 3.000 / N4 H 2.413 /N4 R 2.078 R 1.610 1370 x 1810 H 2.493 / N4 H 1.932 / N4 R 1.231 R.908 1370 x 2110 H 1.477 / N3 H 1.089 / N3 R.791 R.566 1370 x 2410 H.949 / N2 H.680 / N1 R 3.721 R 1.500 1500 x 1510 H 3.000 / N4 H 1.799 /N4 R 1.924 R 1.311 1500 x 1810 H 2.309 / N4 H 1.574 /N4 R 1.130 R.865 1500 x 2110 H 1.357 / N3 H 1.038 / N3 R.723 R.534 1500 x 2410 H.867 / N2 H.640 / N1 R 3.113 R.758 1860 x 1510 H 3.000 / N4 H.910 /N2 R 1.715 R.652 1860 x 1810 H 2.058 / N4 H.782 /N2 R.988 R.579 1860 x 2110 H 1.185 / N3 H.695 /N1 R.624 R - 1860 x 2410 H.749 / N2 H.573 / N1 Note: These tables are based on theoretical section properties, not on approved tests as specified by AS2047 The N values in the above table represent the complete window rating based on NATA test reports, structural calculations and reinterpreted data from NATA test reports. Residential (R) is limited to 5.000 kpa Housing (H) is limited to 3.000 kpa 581I 14 Capral Aluminium. Limited
Structural tables (cont) Windows Type DFD R=Residential l/ 180 H=Housing l/150 Mullion type 1 DF Wind Pressure Serviceability Limit State kpa Window size H x W (mm) Mullion Type 1 Mullion Type 2 900 x 2710 R 2.094 2.094 H 2.513 / N4 2.513 / N4 1000 x 2710 R 1.939 1.939 H 2.327 / N4 2.327 / N4 1200 x 2710 R 1.729 1.729 H 2.075 / N4 2.075/ N4 1370 x 2710 R 1.624 1.624 H 1.948 / N4 1.948 / N4 1500 x 2710 R 1.313 1.577 H 1.576 /N4 1.892 / N4 1860 x 2710 R.653 1.553 H.783 /N2 1.864 / N4 2030 x 2710 R.500 1.553 H.593 /N1 1.864 / N4 Mullion type 2 DF H/D Meeting Stile Italics represent Deflection limited by Mullion Note: These tables are based on theoretical section properties, not on approved tests as specified by AS2047 The N values in the above table represent the complete window rating based on NATA test reports, structural calculations and reinterpreted data from NATA test reports. Residential (R) is limited to 5.000 kpa Housing (H) is limited to 3.000 kpa 581I 15
Windows Structural details 581I 16 Capral Aluminium. Limited
Glazing details Windows 581I 17
Spring balance chart (cont) Windows 581 Double hung MKI July 2002 581I 19
Windows 582 Double Hung MKI Spring balance chart (cont) 581I 20 July 2002
Spring balance chart (cont) Windows July 2002 581I 21
Windows Spring balance chart (cont) 581I 22 July 2002