DESIGN BY: ARCH. GIUSEPPE INZITARI 218
FOR HIGH THICKNESS FROM 12 TO 17.5 MM - GIUMAX GIUMAX 9500 Page 220 GIUMAX 8500 Page 227 ROLLERS Page 233 GIUMAX 4500 Page 236 GIUMAX 6500 Page 244 FROM 8 TO 12 MM - GIUMAX GIUMAX 2000 Page 252 GIUMAX 3000 Page 263 GIUMAX 3200 Page 271 GIUMAX 3500 WOOD Page 277 GIUMAX 7000 CEILING Page 282 219
GIUMAX HIGH THICKNESS FROM 12 TO 17.5 mm 220
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD: GIUMAX 9500 221
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD: GIUMAX 9500 MODEL GIUMAX 9500 Sliding system design made of AISI 304 steel, consisting of a sliding mechanism with staggered rollers placed on a track with a half-round section and flat base. The extremely versatile system is made up of a basic kit with 2/3 grooved rollers plus 1/2 Ø70 mm flat rollers up to a variable amount requested by the customer. Another innovation is the locking system of the glass panel via an optional feature that prevents the carriage from sliding back at end stop. Bar finish: satin-finished steel Accessories finish: mill finish The Kit includes: 2 grooved rollers plus 1 flat one per door, a choice of a 2, 3 or 4 m long track with its relevant ceiling connections, floor guide profile/s, optional locking bracket. Spanner recommended for assembly: Dimensions UT250 Pin Ø2.4 mm 1 Pc 9500 ROLLER CARRIAGES Material: AISI 304 stainless steel Features: roller carriages for moving the door on a half-round section track of which 2/3 rollers with Ø70 mm trapezoidal groove and 1/2 anti-slippage rollers with flat groove depending on the weight of the panel. Finish: mill finish Glass Ø18 mm holes recommended for upper rollers Glass Ø20 mm holes recommended for lower rollers 46 R10 17 Ø10 Ø18 Ø72 20 Ø2 Ø33 20 46 Ø10 Ø20 91 25 Ø33 Ø2 32 4.5 Ø72 SOLID HALF-ROUND TRACK Number of Rollers Glass Thickness GLM9500 2+1 12/17.5 mm 1 Set Bar drilling diagram B A A Bar length No. of Holes Dimensions GLMBST200 2000 mm 4 holes A 567 mm B 150 mm 1 Pc GLMBST300 3000 mm 5 holes A 675 mm B 150 mm 1 Pc GLMBST400 4000 mm 6 holes A 740 mm B 150 mm 1 Pc GLMBST Bar made to measure Per M 222 >>> PRICE LIST REFERENCE PAGE 43 >>>
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD: GIUMAX 9500 CEILING CONNECTION Material: AISI 304 stainless steel Features: connection for fixing and positioning the track with 10 mm adjustment on the vertical axis for adjusting the surface on uneven points. Dimensions: Ø55x6 mm disk with central feed-through hole for M10 threaded bar plus Ø23 mm body. Total height: 107 mm. Finish: mill finish. M10 110 Ø55 GLMATS 1 Pc END STOP Material: AISI 304 stainless steel Features: end stop to be applied to the half-round track with vertical clamping pin. Finish: mill finish Ø10 5 9 36.3 40 GLMFERM 1 Pc 25 1.5 24 LOCKING BRACKET Material: AISI 304 stainless steel Features: optional locking bracket to be applied with the end stop ( GLMFERM), with spherical head, adjustable during installation. Finish: mill finish 37.7 8 20.1 67.5 92 10 34 BRACKET RIGHT GLMSTOPDX GLMSTOPSX 1 Pc 1 Pc 17.2 4.5 12.5 ADJUSTABLE LOWER GUIDE Material: zamak Features: adjustable floor guide for 11/19 mm variable glass thickness to be floor mounted with 2 x M4 countersunk screws. Finish: stainless steel imitation aluminium 26 11/19 41 Ø4 4 Ø9 34 50 Ø4 For glass GLMGREG 11/19 mm 1 Pc >>> PRICE LIST REFERENCE PAGE 43 >>> 223
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD: GIUMAX 9500 Maximum opening width 989 mm GM95002PLA GLMBST200 Solid half-round track 1Pc GLMATS Ceiling connection 4Pc GLMFERM End stop 2Pc GLM9500 9500 roller carriages 1Set GLMGREG Floor guide 1Pc GLMRC Roller with trapezoidal groove 1Pc GLMRP Roller with flat groove 1Pc optional GLMSTOPDX Right locking bracket 1Pc GLMSTOPSX Left locking bracket 1Pc Maximum opening width 1489 mm GM95003PLA GLMBST300 Solid half-round track 1Pc GLMATS Ceiling connection 5Pc GLMFERM End stop 2Pc GLM9500 9500 roller carriages 1Set GLMGREG Floor guide 1Pc GLMRC Roller with trapezoidal groove 1Pc GLMRP Roller with flat groove 1Pc optional GLMSTOPDX Right locking bracket 1Pc GLMSTOPSX Left locking bracket 1Pc Maximum opening width 2052 mm GM95004PLA GLMBST400 Solid half-round track 1Pc GLMATS Ceiling connection 6Pc GLMFERM End stop 4Pc GLM9500 9500 roller carriages 2Set GLMGREG Floor guide 2Pc GLMRC Roller with trapezoidal groove 2Pc GLMRP Roller with flat groove 2Pc optional GLMSTOPDX Right locking bracket 2Pc GLMSTOPSX Left locking bracket 2Pc 224 >>> PRICE LIST REFERENCE PAGE 43 >>>
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD: GIUMAX 9500 opening width opening height To make a door and estimate one needs to know the clearance dimensions i.e. the height and width needed to determine the geometric features of the glass panel. Consequently the choice of the sliding track depends on the width of the opening according to the recommended diagrams: - 2000 mm TRACK (art. GLMBST 200) = MAX OPENING WIDTH 989 mm - 3000 mm TRACK (art. GLMBST 300) = MAX OPENING WIDTH 1489 mm - 4000 mm TRACK (art. GLMBST 400 for double door) = MAX OPENING WIDTH 2052 mm RECOMMENDED DIAGRAM FOR SINGLE DOOR CEILING CONNECTION BAR FIXING OPENING HEIGHT = h 51 A 7 B 20 50 WALL BORDER WALL BORDER The diagram shows the bar assembly for SINGLE DOOR ceiling connection. To position the centre of the first ceiling connection (art. GLMATS) one must consider a distance B (recommended 113 mm) from the side edge of the opening and depending on the thickness of the glass panel one must come away from the wall by a distance A equal to: glass 12 mm A = 81 mm (minimum) glass 12.7 mm A = 82 mm (minimum) glass 13.5 mm A = 83 mm (minimum) glass 15 mm A = 84 mm (minimum) glass 17.5 mm A = 87 mm (minimum) These are the recommended indications. The position of the other connections depends on the choice of the pre-drilled bar. RECOMMENDED DIAGRAM FOR DOUBLE DOOR CEILING CONNECTION BAR FIXING 7 middle axis opening width OPENING HEIGHT = h 51 A 50 WALL BORDER WALL BORDER 50 The diagram shows the bar assembly for DOUBLE DOOR ceiling connection. To position the bar (art. GLMBST400) one must make its middle coincide with the middle of the opening width. Depending on the thickness of the glass panel one must come away from the wall by a distance A equal to: glass 12 mm A = 81 mm (minimum) glass 12.7 mm A = 82 mm (minimum) glass 13.5 mm A = 83 mm (minimum) glass 15 mm A = 84 mm (minimum) glass 17.5 mm A = 87 mm (minimum) These are the recommended indications. 225
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD: GIUMAX 9500 DIAGRAM RECOMMENDED TO CALCULATE SINGLE DOOR GLASS PANELS HEIGHT AND DRILLING 40 C 40 If D 40 To determine the height of the glass panel, proceed as follows: measure the height of the opening and subtract 13.5 mm. Knowing the height of the opening, one must simply calculate the following: 91 Ø18 91 Ø20 Ø18 OPENING HEIGHT -13.5 mm = GLASS PANEL HEIGHT. This is a guideline, where we have considered the position of the glass at a distance of 6.5 mm from the ceiling. OPENING HEIGHT = h 4 41 7 H glass = h-13.5 Lv Lv = Opening width + 70 If = Lv - (C+D) C= min 45 mm. D= min 75 mm. To determine the width of the glass panel, proceed as follows: measure the width of the opening and add 70 mm. The figure describes the glass panel drilling diagram in the event of right to left closing, considering an overlap of 50 mm on the and 20 mm on the other. In the opposite case the diagram must be read the other way around i.e. the right side will become the left and the left side will become the right. DIAGRAM RECOMMENDED TO CALCULATE DOUBLE DOOR GLASS PANELS HEIGHT AND DRILLING 40 40 D If 40 C C 40 If D 40 To determine the height of the glass panel, proceed as follows: measure the height of the opening and subtract 13.5 mm. 91 Ø18 Ø18 Ø20 91 Ø18 91 Ø20 Ø18 Knowing the height of the opening, one must simply calculate the following: OPENING HEIGHT = h 4 41 7 H glass = h-13.5 Lv Lv C= min 55 mm. D= min 91 mm. OPENING HEIGHT -13.5 mm = GLASS PANEL HEIGHT. This is a guideline, where we have considered the position of the glass at a distance of 6.5 mm from the ceiling. To determine the width of the single glass panel, proceed as follows: measure the width of the opening, add 95 mm and divide the result by 2. The figure describes the glass panel drilling diagram, considering an overlap of 50 mm on the and 20 mm on the other. Please note that the glass must always stay within the appropriate floor guide, and that the door pulling handle may in some cases cause variations in the passage opening. 26 Lv = (Opening width + 95)/2 If = Lv - (C+D) 50 screw M4 226
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD. GIUMAX 8500 227
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD. GIUMAX 8500 MODEL GIUMAX 8500 Sliding system design made of AISI 304 steel, consisting of a sliding mechanism with staggered rollers placed on a track with a halfround section and flat base. The extremely versatile system is made up of a basic kit with 2/3 grooved rollers plus 1/2 Ø30 mm flat rollers up to a variable amount requested by the customer. Another innovation is the locking system of the glass panel via an optional feature that prevents the carriage from sliding back at end stop. Bar finish: satin-finished steel Accessories finish: mill finish The Kit includes: 2 grooved rollers plus 1 flat one per door, a choice of a 2, 3 or 4 m long track with its relevant ceiling connections, end stops, floor guide/s, optional locking bracket. Spanner recommended for assembly: Dimensions UT250 Pin Ø2.4 mm 1 Pc 8500 ROLLER CARRIAGES Material: AISI 304 stainless steel Features: roller carriages for moving the door on a half-round section track of which 2/3 Ø70 mm rollers with trapezoidal groove and 1/2 anti-slippage rollers with flat groove depending on the weight of the panel. Finish: mill finish -Glass Ø18 mm holes recommended for upper rollers -Glass Ø20 mm holes recommended for lower rollers 70 46 24 25 17 R10 Ø10 Ø10 30 4.5 Ø20 Ø18 Ø72 20 20 Ø33 Ø2 Ø2 Ø33 Number of Rollers Glass Thickness GLM8500 2+1 12/17.5 mm 1 Set SOLID HALF-ROUND TRACK Bar drilling diagram B A A Bar length No. of Holes Dimensions GLMBST200 2000 mm 4 holes A 567 mm B 150 mm 1 Pc GLMBST300 3000 mm 5 holes A 675 mm B 150 mm 1 Pc GLMBST400 4000 mm 6 holes A 740 mm B 150 mm 1 Pc GLMBST Bar made to measure Per M 228 >>> PRICE LIST REFERENCE PAGE 44 >>>
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD. GIUMAX 8500 CEILING CONNECTION Material: AISI 304 stainless steel Features: connection for fixing and positioning the track with 10 mm adjustment on the vertical axis for adjusting the surface on uneven points. Dimensions: Ø55x6 mm disk with central feed-through hole for M10 threaded bar plus Ø23 mm body. Total height: 107 mm. Finish: mill finish. M10 10 110 Ø55 92 34 GLMATS 1 Pc END STOP Material: AISI 304 stainless steel Features: end stop to be applied to the half-round track with vertical clamping pin. Finish: mill finish Ø10 5 36.3 9 40 GLMFERM 1 Pc 25 1.5 24 BRACKET LOCKING BRACKET Material: AISI 304 stainless steel Features: optional locking bracket to be applied with the end stop ( GLMFERM), with spherical head, adjustable during installation. Finish: mill finish 37.7 8 20.1 67.5 RIGHT GLMSTOPDX GLMSTOPSX 1 Pc 1 Pc 17.2 4.5 12.5 ADJUSTABLE LOWER GUIDE Material: zamak Features: adjustable floor guide for 11/19 mm variable glass thickness to be floor mounted with 2 x M4 countersunk screws. Finish: stainless steel imitation aluminium 26 11/19 41 Ø4 4 Ø9 34 50 Ø4 For glass GLMGREG 11/19 mm 1 Pc >>> PRICE LIST REFERENCE PAGE 44 >>> 229
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD. GIUMAX 8500 Maximum opening width 989 mm GM85002PLA GLMBST200 Solid half-round track 1Pc GLMATS Ceiling connection 4Pc GLMFERM End stop 2Pc GLM8500 8500 roller carriages 1Set GLMGREG Floor guide 1Pc GLMRC Roller with trapezoidal groove 1Pc GLMRL Flat roller 1Pc optional GLMSTOPDX Right locking bracket 1Pc GLMSTOPSX Left locking bracket 1Pc Maximum opening width 1489 mm GM85003PLA GLMBST300 Solid half-round track 1Pc GLMATS Ceiling connection 5Pc GLMFERM End stop 2Pc GLM8500 8500 roller carriages 1Set GLMGREG Floor guide 1Pc GLMRC Roller with trapezoidal groove 1Pc GLMRL Flat roller 1Pc optional GLMSTOPDX Right locking bracket 1Pc GLMSTOPSX Left locking bracket 1Pc Maximum opening width 2052 mm GM85004PLA GLMBST400 Solid half-round track 1Pc GLMATS Ceiling connection 6Pc GLMFERM End stop 4Pc GLM8500 8500 roller carriages 2Set GLMGREG Floor guide 2Pc GLMRC Roller with trapezoidal groove 2Pc GLMRL Flat roller 2Pc optional GLMSTOPDX Right locking bracket 2Pc GLMSTOPSX Left locking bracket 2Pc 230 >>> PRICE LIST REFERENCE PAGE 44 >>>
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD. GIUMAX 8500 opening width opening height To make a door and estimate one needs to know the clearance dimensions i.e. the height and width needed to determine the geometric features of the glass panel. Consequently the choice of the sliding track depends on the width of the opening according to the recommended diagrams: - 2000 mm TRACK (art. GLMBST 200) = MAX OPENING WIDTH 989 mm - 3000 mm TRACK (art. GLMBST 300) = MAX OPENING WIDTH 1489 mm - 4000 mm TRACK (art. GLMBST 400 for double door) = MAX OPENING WIDTH 2052 mm RECOMMENDED DIAGRAM FOR SINGLE DOOR CEILING CONNECTION BAR FIXING OPENING HEIGHT = h 51 A 7 B 20 50 WALL BORDER WALL BORDER The diagram shows the bar assembly for SINGLE DOOR ceiling connection. To position the centre of the first ceiling connection (art. GLMATS) one must consider a distance B (recommended 113 mm) from the side edge of the opening and depending on the thickness of the glass panel one must come away from the wall by a distance A equal to: glass 12 mm A = 81 mm (minimum) glass 12.7 mm A = 82 mm (minimum) glass 13.5 mm A = 83 mm (minimum) glass 15 mm A = 84 mm (minimum) glass 17.5 mm A = 87 mm (minimum) These are the recommended indications. The position of the other connections depends on the choice of the pre-drilled bar. RECOMMENDED DIAGRAM FOR DOUBLE DOOR CEILING CONNECTION BAR FIXING OPENING HEIGHT = h 7 middle axis opening width 51 A 50 WALL BORDER WALL BORDER 50 The diagram shows the bar assembly for DOUBLE DOOR ceiling connection. To position the bar (art. GLMBST400) one must make its middle coincide with the middle of the opening width. Depending on the thickness of the glass panel one must come away from the wall by a distance A equal to: glass 12 mm A = 81 mm (minimum) glass 12.7 mm A = 82 mm (minimum) glass 13.5 mm A = 83 mm (minimum) glass 15 mm A = 84 mm (minimum) glass 17.5 mm A = 87 mm (minimum) These are the recommended indications. 231
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD. GIUMAX 8500 DIAGRAM RECOMMENDED TO CALCULATE SINGLE DOOR GLASS PANELS HEIGHT AND DRILLING 40 C 40 If D 40 To determine the height of the glass panel, proceed as follows: measure the height of the opening and subtract 13.5 mm. Knowing the height of the opening, one must simply calculate the following: 70 Ø18 70 Ø20 Ø18 OPENING HEIGHT -13.5 mm = GLASS PANEL HEIGHT. OPENING HEIGHT = h 4 41 7 H glass = h-13.5 Lv Lv = Opening width + 70 If = Lv - (C+D) C= min 45 mm. D= min 75 mm. This is a guideline, where we have considered the position of the glass at a distance of 6.5 mm from the ceiling. To determine the width of the glass panel, proceed as follows: measure the width of the opening and add 70 mm. The figure describes the glass panel drilling diagram in the event of right to left closing, considering an overlap of 50 mm on the and 20 mm on the other. In the opposite case the diagram must be read the other way around i.e. the right side will become the left and the left side will become the right. DIAGRAM RECOMMENDED TO CALCULATE DOUBLE DOOR GLASS PANELS HEIGHT AND DRILLING 40 40 D If 40 C C 40 If D 40 To determine the height of the glass panel, proceed as follows: measure the height of the opening and subtract 13.5 mm. OPENING HEIGHT = h 4 41 70 7 H glass = h-13.5 Ø18 Ø20 Lv 70 Lv = (Opening width + 95)/2 If = Lv - (C+D) Ø18 Ø18 70 Ø20 Lv Ø18 C= min 55 mm. D= min 91 mm. Knowing the height of the opening, one must simply calculate the following: OPENING HEIGHT -13.5 mm = GLASS PANEL HEIGHT. This is a guideline, where we have considered the position of the glass at a distance of 6.5 mm from the ceiling. To determine the width of the single glass panel, proceed as follows: measure the width of the opening, add 95 mm and divide the result by 2. The figure describes the glass panel drilling diagram, considering an overlap of 50 mm on the and 20 mm on the other. Please note that the glass must always stay within the appropriate floor guide, and that the door pulling handle may in some cases cause variations in the passage opening. 26 50 screw M4 232
ROLLERS MADE OF AISI 304 FOR HIGH THICKNESS GLASS 233
ROLLERS MADE OF AISI 304 FOR HIGH THICKNESS GLASS ROLLER WITH TRAPEZOIDAL GROOVE Material: AISI 304 stainless steel Features: roller with trapezoidal groove, for round or half-round section tracks with variable radius from r=7 mm to r=14 mm and Ø70 mm circular boss. Suitable for panes of variable thickness from 12 to 17.5 mm. On request and quote one can vary the size of the roller for diameters that go from Ø50 mm to Ø72 mm, as well as having a 15.4 mm wide roller with flat base. It is also possible to change the shape of the external bosses, instead of the round one. Glass hole recommended Ø17 mm. Finish: mill finish. 21.4 17 15.4 S Ø70 Ø65.5 Ø15 Ø33 39.8 47.8 43.2 4 R7 R10 R14 GLASS BORDER Dimensions For Glass GLMRC Boss Ø70 mm 12/17.5 mm 1 Pc ROLLER WITH FLAT GROOVE Material: AISI 304 stainless steel Features: roller with flat groove, for square and/or rectangular section tracks, with maximum base W=20.5 mm and Ø70 mm circular boss. Suitable for panes of variable thickness from 12 to 17.5 mm. On request and quote one can vary the size of the roller for diameters that go from Ø50 mm to Ø72 mm, as well as having a 23.5 mm wide roller with flat base or with groove radius R=10 mm (see technical figures). It is also possible to change the shape of the external bosses, instead of the round one. Glass hole recommended Ø17 mm. Finish: mill finish. example GLMRP with flat groove example GLMRP with modified groove 17 R10 17 S S Ø15 Ø15 Ø70 Ø66.5 Ø33 Ø70 Ø51.7 Ø33 21 23.5 29.5 23.5 29.5 Dimensions For Glass GLMRP Boss Ø70 mm 12/17.5 mm 1 Pc 234 >>> PRICE LIST REFERENCE PAGE 45 >>>
ROLLERS MADE OF AISI 304 FOR HIGH THICKNESS GLASS FLAT ROLLER Material: AISI 304 stainless steel Features: flat roller for square and/or rectangular section tracks, with maximum base W=22.5 mm and Ø33 mm flat circular external boss. Suitable for panes of variable thickness from 12/17.5 mm. Finish: mill finish. Glass hole recommended Ø17 mm. 17 Ø30 Ø23 23 S Ø15 Ø33 Dimensions For Glass GLMRL Boss Ø33 mm 12/17.5 mm 1 Pc ROLLER WITH TRAPEZOIDAL GROOVE Material: AISI 304 stainless steel Features: Roller with trapezoidal groove for round and/or half-round section tracks with variable radius from R=7 mm to R=14 mm and Ø25 mm external circular boss. Suitable for panes of variable thickness from 6/17.5 mm. Finish: mill finish. Glass hole recommended Ø12 mm. 24.3 21.5 17 S Ø24 Ø30 Ø10 Ø25 27 19 22.5 4 R7 R10 R14 GLASS BORDER Dimensions For Glass GLMRCT Boss Ø25 mm 6/17.5 mm 1 Pc >>> PRICE LIST REFERENCE PAGE 45 >>> 235
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD. GIUMAX 4500 DOOR 1550 X 2800 TH. 8+8 236
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD. GIUMAX 4500 MODEL GIUMAX 4500 Sliding system design made of AISI 304 steel, which differs from the existing ones as it consists of at least 2 sliding carriages on a track with a half-round section and flat base. Each carriage features slots and grub screws for the various adjustments. The innovation is the locking system of the glass panel via an optional feature that prevents the carriage from sliding back at end stop. Suitable for glass thickness 12/17.5 mm. Bar finish: satin-finished steel Accessories finish: mill finish The Kit includes: 2/4 carriages, a choice of a 2, 3 or 4 m long track with its relevant wall or glass connections, floor guide/s, optional locking bracket. Spanner recommended for assembly: PAIR OF 4500 CARRIAGES Material: AISI 304 stainless steel Features: pair of carriages for door movement on a half-round section track with bracket and visible bosses with trapezoidal groove roller. Each carriage features slots and grub screws for the various adjustments. Finish: mill finish Glass hole recommended Ø21 mm. 2 mm deep countersink. Dimensions UT250 Pin Ø2.4 mm 1 Pc 34 21.4 Ø71.7 89 68 64 71 82 12 255 15 Ø25 Ø19 8 R18 35 Glass thickness GLM4500 12/17.5 mm 1 Pair SOLID HALF-ROUND TRACK Bar drilling diagram B A A Bar length No. of Holes Dimensions GLMBST200 2000 mm 4 holes A 567 mm B 150 mm 1 Pc GLMBST300 3000 mm 5 holes A 675 mm B 150 mm 1 Pc GLMBST400 4000 mm 6 holes A 740 mm B 150 mm 1 Pc GLMBST Bar made to measure Per M >>> PRICE LIST REFERENCE PAGE 45 >>> 237
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD. GIUMAX 4500 WALL CONNECTION Material: AISI 304 stainless steel - Features: connection for fixing the track to the wall with Ø50x4.5 mm boss and Ø13x21 mm spacer and a M8x80 mm cheese-head screw with hexagon socket for key Ch6. - Finish: mill finish 54 26 R10 25 GLMATM The quantity is determined according to the amount of holes in the track 1 Pc GLASS CONNECTION Material: AISI 304 stainless steel - Features: connection for fixing the track to the glass with Ø50x3 mm boss and Ø13x21 mm spacer and a M8x45 mm cheese-head screw with hexagon socket for key Ch6, for glass thickness 12/17.5 mm. In the event of different thicknesses one must assess the right length of the screw. Finish: mill finish Glass hole recommended Ø20 mm. 12/17.5 27 R10 25 GLMATV The quantity is determined according to the amount of holes in the track 1 Pc END STOP Material: AISI 304 stainless steel Features: end stop to be applied to the half-round track with vertical clamping pin. Finish: mill finish Ø10 5 40 36.3 9 GLMFERM 1 Pc 25 1.5 24 BRACKET LOCKING BRACKET Material: AISI 304 stainless steel Features: optional locking bracket to be applied with the end stop ( GLMFERM), with spherical head, adjustable during installation. Finish: mill finish 37.7 8 20.1 67.5 RIGHT GLMSTOPDX GLMSTOPSX 1 Pc 1 Pc 17.2 4.5 12.5 ADJUSTABLE LOWER GUIDE Material: zamak Features: adjustable floor guide for 11/19 mm variable glass thickness to be floor mounted with 2 x M4 countersunk screws. Finish: stainless steel imitation aluminium 26 11/19 41 Ø4 4 Ø9 34 50 Ø4 For glass GLMGREG 11/19 mm 1 Pc 238 >>> PRICE LIST REFERENCE PAGE 45/46 >>>
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD. GIUMAX 4500 Maximum opening width 948 mm GM45002MUR GLMBST200 Solid half-round track 1Pc GLMATM Wall connection 4Pc GLMFERM End stop 2Pc GLM4500 Pair of 4500 carriages 1Pair GLMGREG Floor guide 1Pc optional GLMBOR Boss for cylindrical holes 4Pc GLMSTOPDX Right locking bracket 1Pc GLMSTOPSX Left locking bracket 1Pc Maximum opening width 1485 mm GM45003MUR GLMBST300 Solid half-round track 1Pc GLMATM Wall connection 5Pc GLMFERM End stop 2Pc GLM4500 Pair of 4500 carriages 1Pair GLMGREG Floor guide 1Pc optional GLMBOR Boss for cylindrical holes 4Pc GLMSTOPDX Right locking bracket 1Pc GLMSTOPSX Left locking bracket 1Pc Maximum opening width 2044 mm GM45004MUR GLMBST400 Solid half-round track 1Pc GLMATM Wall connection 6Pc GLMFERM End stop 4Pc GLM4500 Pair of 4500 carriages 2Pairs GLMGREG Floor guide 2Pc optional GLMBOR Boss for cylindrical holes 8Pc GLMSTOPDX Right locking bracket 2Pc GLMSTOPSX Left locking bracket 2Pc >>> PRICE LIST REFERENCE PAGE 46 >>> 239
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD. GIUMAX 4500 Maximum opening width 948 mm GM45002VET GLMBST200 Solid half-round track 1Pc GLMATV Glass connection 4Pc GLMFERM End stop 2Pc GLM4500 Pair of 4500 carriages 1Pair GLMGREG Floor guide 1Pc optional GLMSTOPDX Right locking bracket 1Pc GLMSTOPSX Left locking bracket 1Pc Maximum opening width 1485 mm GM45003VET GLMBST300 Solid half-round track 1Pc GLMATV Glass connection 5Pc GLMFERM End stop 2Pc GLM4500 Pair of 4500 carriages 1Pair GLMGREG Floor guide 1Pc optional GLMSTOPDX Right locking bracket 1Pc GLMSTOPSX Left locking bracket 1Pc Maximum opening width 2044 mm GM45004VET GLMBST400 Solid half-round track 1Pc GLMATV Glass connection 6Pc GLMFERM End stop 4Pc GLM4500 Pair of 4500 carriages 2Pairs GLMGREG Floor guide 2Pc optional GLMSTOPDX Right locking bracket 2Pc GLMSTOPSX Left locking bracket 2Pc 240 >>> PRICE LIST REFERENCE PAGE 46 >>>
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD. GIUMAX 4500 opening width opening height To make a door and estimate one needs to know the clearance dimensions i.e. the height and width needed to determine the geometric features of the glass panel. Consequently the choice of the sliding track depends on the width of the opening according to the recommended diagrams: - 2000 mm TRACK (art. GLMBST 200) = MAX OPENING WIDTH 948 mm - 3000 mm TRACK (art. GLMBST 300) = MAX OPENING WIDTH 1485 mm - 4000 mm TRACK (art. GLMBST 400 for double door) = MAX OPENING WIDTH 2044 mm RECOMMENDED DIAGRAM FOR SINGLE DOOR WALL/FIXED GLASS CONNECTION BAR FIXING A 150 A The diagram shows the bar assembly for SINGLE DOOR wall/fixed glass connection. To position the first hole one must consider height A (recommended 66 mm) from the upper edge of the opening and B (recommended 75 mm) from the side edge of the opening. The other holes will consequently result from the choice of the pre-drilled bar supplied. OPENING HEIGHT + A = h OPENING HEIGHT B 20 20 50 RECOMMENDED DIAGRAM FOR DOUBLE DOOR WALL/FIXED GLASS CONNECTION BAR FIXING OPENING HEIGHT + A = h A OPENING HEIGHT 50 67±2 48±3 3 18 3 20 middle axis opening width 20 50 The diagram shows the bar assembly for DOUBLE DOOR wall/fixed glass connection. To install the bar one must consider height A (recommended 66 mm) from the upper edge of the opening and subsequently position it making its middle coincide with the middle of the opening width. The holes centre-to-centre distance can be achieved from the 4000 mm predrilled bar. ADJUSTMENT 241
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD. GIUMAX 4500 DIAGRAM RECOMMENDED TO CALCULATE SINGLE DOOR GLASS PANELS HEIGHT AND DRILLING C= min 45 mm. D= min 75 mm. 82 A front view Ø21 42 Ø21 OPENING HEIGHT + A = h OPENING HEIGHT countersunk 2 31 H glass = h 55 C Ø21 If 67 Lv Ø21 D 7 4 41 Lv = Opening width + 70 If = Lv - (C+D) To determine the height of the glass panel, proceed as follows: measure from the centre of the hole, where the spacer for the track will be positioned, to the floor and subtract 54.5 mm. From the figure one can deduce that the track is placed at a predetermined height A where the hole to be made is recommended 66 mm above the clearance space: this is to make the glass panel overlap by about 20 mm from the upper edge of the opening. Knowing the clearance height measurement and knowing that the track is placed at distance A, one must simply calculate the following: OPENING HEIGHT + A (recommended 66 mm) 54.5 mm = GLASS PANEL HEIGHT. Diagram with countersunk holes Ø21 countersunk 2 mm Ø25 This applies only if one observes the position of the track. To determine the width of the glass panel, proceed as follows: measure the width of the opening and add 70 mm. countersunk 2 mm The figure describes the glass panel drilling diagram in the event of right to left closing, considering an overlap of 50 mm on the and 20 mm on the other. In the opposite case the diagram must be read the other way around i.e. the right side will become the left and the left side will become the right. Ø21 Ø25 Please note that the glass must always stay within the appropriate floor guide, and that the door pulling handle may in some cases cause variations in the passage opening. 26 50 screw M4 242
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD. GIUMAX 4500 DIAGRAM RECOMMENDED TO CALCULATE DOUBLE DOOR GLASS PANELS HEIGHT AND DRILLING C= min 75 mm. D= min 95 mm. 82 OPENING HEIGHT + A = h A OPENING HEIGHT countersunk 2 31 H glass = h 55 C Ø21 Ø21 42 67 IF Lv Ø21 Ø21 D front view D Ø21 Ø21 42 67 IF Lv Ø21 Ø21 C 7 4 41 Lv = (Opening width + 95)/2 If = Lv - (C+D) To determine the height of the glass panel, proceed as follows: measure from the centre of the hole, where the spacer for the track will be positioned, to the floor and subtract 54.5 mm. From the figure one can deduct that the track is located at a predetermined height A where the hole to be made is recommended 66 mm above the clearance space; this is in order to make the glass panel overlap by about 20 mm from the upper edge of the opening. Diagram with countersunk holes countersunk 2 mm OPENING HEIGHT + A (recommended 66 mm) 54.5 mm = GLASS PANEL HEIGHT. This applies only if one observes the position of the track. Ø21 Ø25 To determine the width of the single glass panel, proceed as follows: measure the width of the opening, add 95 mm and divide the result by 2. countersunk 2 mm The figure describes the glass panel drilling diagram, considering an overlap of 50 mm on the. Ø21 Ø25 Please note that the glass must always stay within the appropriate floor guide, and that the door pulling handle may in some cases cause variations in the passage opening. 26 50 screw M4 243
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD. GIUMAX 6500 244
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD. GIUMAX 6500 MODEL GIUMAX 6500 Sliding system design made of AISI 304 steel, which differs from the existing ones as it consists of at least 2 double roller sliding carriages on a track with a half-round section and flat base. Each carriage features slots and grub screws for the various adjustments. The innovation is the locking system of the glass panel via an optional feature that prevents the carriage from sliding back at end stop. Suitable for glass thickness 12/17.5 mm. Bar finish: satin-finished steel Accessories finish: mill finish The Kit includes: 2/4 carriages, a choice of a 2, 3 or 4 m long track with its relevant wall or glass connections, end stops, floor guide/s, optional locking bracket. Spanner recommended for assembly: PAIR OF 6500 CARRIAGES Material: AISI 304 stainless steel Features: pair of carriages for door movement on a half-round section track with bracket and visible bosses and 2 trapezoidal groove rollers. Each carriage features slots and grub screws for the various adjustments. Finish: mill finish Glass hole recommended Ø21 mm. 2 mm deep countersink. Dimensions UT250 Pin Ø2.4 mm 1 Pc 34 21.4 Ø71.7 82 68 89 64 71 82 12 255 15 Ø25 Ø19 8 R18 35 Glass thickness GLM6500 12/17.5 mm 1 Pair SOLID HALF-ROUND TRACK Bar drilling diagram B A A Bar length No. of Holes Dimensions GLMBST200 2000 mm 4 holes A 567 mm B 150 mm 1 Pc GLMBST300 3000 mm 5 holes A 675 mm B 150 mm 1 Pc GLMBST400 4000 mm 6 holes A 740 mm B 150 mm 1 Pc GLMBST Bar made to measure Per M >>> PRICE LIST REFERENCE PAGE 46 >>> 245
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD. GIUMAX 6500 WALL CONNECTION Material: AISI 304 stainless steel - Features: connection for fixing the track to the wall with Ø50x4.5 mm boss and Ø13x21 mm spacer and a M8x80 mm cheese-head screw with hexagon socket for key Ch6. - Finish: mill finish 54 26 R10 25 GLMATM The quantity is determined according to the amount of holes in the track 1 Pc GLASS CONNECTION Material: AISI 304 stainless steel - Features: connection for fixing the track to the glass with Ø50x3 mm boss and Ø13x21 mm spacer and a M8x45 mm cheese-head screw with hexagon socket for key Ch6, for glass thickness 12/17.5 mm. In the event of different thicknesses one must assess the right length of the screw. Finish: mill finish Glass hole recommended Ø20 mm. 12/17.5 27 R10 25 GLMATV The quantity is determined according to the amount of holes in the track 1 Pc END STOP Material: AISI 304 stainless steel Features: end stop to be applied to the half-round track with vertical clamping pin. Finish: mill finish Ø10 5 40 36.3 9 GLMFERM 1 Pc 25 1.5 24 BRACKET LOCKING BRACKET Material: AISI 304 stainless steel Features: optional locking bracket to be applied with the end stop ( GLMFERM), with spherical head, adjustable during installation. Finish: mill finish 37.7 8 20.1 67.5 RIGHT GLMSTOPDX GLMSTOPSX 1 Pc 1 Pc 17.2 4.5 12.5 ADJUSTABLE LOWER GUIDE Material: zamak Features: adjustable floor guide for 11/19 mm variable glass thickness to be floor mounted with 2 x M4 countersunk screws. Finish: stainless steel imitation aluminium 26 11/19 41 Ø4 4 Ø9 34 50 Ø4 For glass GLMGREG 11/19 mm 1 Pc 246 >>> PRICE LIST REFERENCE PAGE 46/47 >>>
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD. GIUMAX 6500 Maximum opening width 948 mm GM65002MUR GLMBST200 Solid half-round track 1Pc GLMATM Wall connection 4Pc GLMFERM End stop 2Pc GLM6500 Pair of 6500 carriages 1Pair GLMGREG Floor guide 1Pc optional GLMBOR Boss for cylindrical holes 4Pc GLMSTOPDX Right locking bracket 1Pc GLMSTOPSX Left locking bracket 1Pc Maximum opening width 1485 mm GM65003MUR GLMBST300 Solid half-round track 1Pc GLMATM Wall connection 5Pc GLMFERM End stop 2Pc GLM6500 Pair of 6500 carriages 1Pair GLMGREG Floor guide 1Pc optional GLMBOR Boss for cylindrical holes 4Pc GLMSTOPDX Right locking bracket 1Pc GLMSTOPSX Left locking bracket 1Pc Maximum opening width 2044 mm GM65004MUR GLMBST400 Solid half-round track 1Pc GLMATM Wall connection 6Pc GLMFERM End stop 4Pc GLM6500 Pair of 6500 carriages 2Pairs GLMGREG Floor guide 2Pc optional GLMBOR Boss for cylindrical holes 8Pc GLMSTOPDX Right locking bracket 2Pc GLMSTOPSX Left locking bracket 2Pc >>> PRICE LIST REFERENCE PAGE 47 >>> 247
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD. GIUMAX 6500 Maximum opening width 948 mm GM65002VET GLMBST200 Solid half-round track 1Pc GLMATV Glass connection 4Pc GLMFERM End stop 2Pc GLM6500 Pair of 6500 carriages 1Pair GLMGREG Floor guide 1Pc optional GLMSTOPDX Right locking bracket 1Pc GLMSTOPSX Left locking bracket 1Pc Maximum opening width 1485 mm GM65003VET GLMBST300 Solid half-round track 1Pc GLMATV Glass connection 5Pc GLMFERM End stop 2Pc GLM6500 Pair of 6500 carriages 1Pair GLMGREG Floor guide 1Pc optional GLMSTOPDX Right locking bracket 1Pc GLMSTOPSX Left locking bracket 1Pc Maximum opening width 2044 mm GM65004VET GLMBST400 Solid half-round track 1Pc GLMATV Glass connection 6Pc GLMFERM End stop 4Pc GLM6500 Pair of 6500 carriages 2Pairs GLMGREG Floor guide 2Pc optional GLMSTOPDX Right locking bracket 2Pc GLMSTOPSX Left locking bracket 2Pc 248 >>> PRICE LIST REFERENCE PAGE 47 >>>
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD. GIUMAX 6500 opening width opening height To make a door and estimate one needs to know the clearance dimensions i.e. the height and width needed to determine the geometric features of the glass panel. Consequently the choice of the sliding track depends on the width of the opening according to the recommended diagrams: - 2000 mm TRACK (art. GLMBST 200) = MAX OPENING WIDTH 948 mm - 3000 mm TRACK (art. GLMBST 300) = MAX OPENING WIDTH 1485 mm - 4000 mm TRACK (art. GLMBST 400 for double door) = MAX OPENING WIDTH 2044 mm RECOMMENDED DIAGRAM FOR SINGLE DOOR WALL/FIXED GLASS CONNECTION BAR FIXING A 150 A The diagram shows the bar assembly for SINGLE DOOR wall/fixed glass connection. To position the first hole one must consider height A (recommended 66 mm) from the upper edge of the opening and B (recommended 75 mm) from the side edge of the opening. The other holes will consequently result from the choice of the pre-drilled bar supplied. OPENING HEIGHT + A = h OPENING HEIGHT B 20 20 50 RECOMMENDED DIAGRAM FOR DOUBLE DOOR WALL/FIXED GLASS CONNECTION BAR FIXING OPENING HEIGHT + A = h A OPENING HEIGHT 67±2 2 25±2 2 16 50 20 middle axis opening width 20 50 The diagram shows the bar assembly for DOUBLE DOOR wall/fixed glass connection. To install the bar one must consider height A (recommended 66 mm) from the upper edge of the opening and subsequently position it making its middle coincide with the middle of the opening width. The holes centre-to-centre distance can be achieved from the 4000 mm predrilled bar. ADJUSTMENT 249
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD. GIUMAX 6500 DIAGRAM RECOMMENDED TO CALCULATE SINGLE DOOR GLASS PANELS HEIGHT AND DRILLING C= min 45 mm. D= min 75 mm. 82 A front view Ø21 42 Ø21 OPENING HEIGHT + A = h OPENING HEIGHT countersunk 2 31 H glass = h 55 C Ø21 If 67 Lv Ø21 D 7 4 41 Lv = Opening width + 70 If = Lv - (C+D) To determine the height of the glass panel, proceed as follows: measure from the centre of the hole, where the spacer for the track will be positioned, to the floor and subtract 54.5 mm. From the figure one can deduce that the track is placed at a predetermined height A where the hole to be made is recommended 66 mm above the clearance space: this is to make the glass panel overlap by about 20 mm from the upper edge of the opening. Knowing the clearance height measurement and knowing that the track is placed at distance A, one must simply calculate the following: OPENING HEIGHT + A (recommended 66 mm) 54.5 mm = GLASS PANEL HEIGHT. Diagram with countersunk holes Ø21 countersunk 2 mm Ø25 This applies only if one observes the position of the track. To determine the width of the glass panel, proceed as follows: measure the width of the opening and add 70 mm. countersunk 2 mm The figure describes the glass panel drilling diagram in the event of right to left closing, considering an overlap of 50 mm on the and 20 mm on the other. In the opposite case the diagram must be read the other way around i.e. the right side will become the left and the left side will become the right. Ø21 Ø25 Please note that the glass must always stay within the appropriate floor guide, and that the door pulling handle may in some cases cause variations in the passage opening. 26 50 screw M4 250
CARRIAGES MADE OF AISI 304 FOR HIGH THICKNESS GLASS - MOD. GIUMAX 6500 DIAGRAM RECOMMENDED TO CALCULATE DOUBLE DOOR GLASS PANELS HEIGHT AND DRILLING C= min 75 mm. D= min 95 mm. 82 OPENING HEIGHT + A = h A OPENING HEIGHT countersunk 2 31 H glass = h 55 C Ø21 Ø21 42 67 IF Lv Ø21 Ø21 D front view D Ø21 Ø21 42 67 IF Lv Ø21 Ø21 C 7 4 41 Lv = (Opening width + 95)/2 If = Lv - (C+D) To determine the height of the glass panel, proceed as follows: measure from the centre of the hole, where the spacer for the track will be positioned, to the floor and subtract 54.5 mm. From the figure one can deduct that the track is located at a predetermined height A where the hole to be made is recommended 66 mm above the clearance space; this is in order to make the glass panel overlap by about 20 mm from the upper edge of the opening. Diagram with countersunk holes countersunk 2 mm OPENING HEIGHT + A (recommended 66 mm) 54.5 mm = GLASS PANEL HEIGHT. This applies only if one observes the position of the track. Ø21 Ø25 To determine the width of the single glass panel, proceed as follows: measure the width of the opening, add 95 mm and divide the result by 2. countersunk 2 mm The figure describes the glass panel drilling diagram, considering an overlap of 50 mm on the and 20 mm on the other. Ø21 Ø25 Please note that the glass must always stay within the appropriate floor guide, and that the door pulling handle may in some cases cause variations in the passage opening. 26 50 screw M4 251
GIUMAX FROM 8 TO 12 mm 252
253
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 2000 254
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 2000 MODEL GIUMAX 2000 Sliding system design made of AISI 304 steel made up of at least 2 sliding carriages on a round section track without visible bosses. Suitable for glass thickness 8/10/12 mm. Bar finish: satin-finished steel Accessories finish: mill finish The Kit includes: 2/4 carriages, a choice of a 2, 3 or 4 m long track with its relevant wall or glass connections, end stops, floor guide/s. Spanner recommended for assembly: Dimensions UT300 Pin Ø2.9 mm 1 Pc PAIR OF 2000 CARRIAGES Material: AISI 304 stainless steel Features: pair of carriages for door movement on a round section track with bracket without visible bosses and roller with R 25 circular groove. Finish: mill finish and satin-finished steel Glass hole recommended Ø19 mm. Ø12 10 44 30 18 62.5 50 80 208 Ø55 Ø12 23.1 8/12 31 R15.5 Glass thickness GLM2000 S = 8/10/12 mm 1 Pair SATIN-FINISHED TUBULAR TRACK WITH FINISHING CAPS Connections centre-to-centre C Ø25 3 Ø25 END TAPPO CAP DI FINITURA Ø21 Bar length No. recom. connections Recom. centre-to-centre GLMCAV2 2000 mm 4 C 560 mm 1 Pc GLMCAV3 3000 mm 6 C 540 mm 1 Pc GLMCAV4 4000 mm 8 C 530 mm 1 Pc WALL CONNECTION Material: AISI 304 stainless steel Features: connection for fixing the track to the wall with Ø45 and 33 mm wide milled boss to be mounted on the wall with an M6 countersunk-head screw with a hexagon socket for key Ch4. Finish: mill finish Ø44.7 6.3 Ø25 17.5 33 Ø6.5 22.4 38.8 28.5 Ø25 9.9 GLM33M5 >>> PRICE LIST REFERENCE PAGE 48 >>> 1 Pc 255
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 2000 GLASS CONNECTION Material: AISI 304 stainless steel Features: connection for fixing the track to the glass with Ø45 and 33 mm wide milled boss to be mounted on the glass with Ø28 boss and 4 dead holes in the head. Glass thickness 10/12 mm. Finish: mill finish Glass hole recommended Ø17 mm. Ø 2.0 12.0 Glass hole GLM33VT Ø17 mm 1 Pc Ø 28.0 Ø 44.7 6.3 Ø 25 33 17.5 10/12 22.4 28.5 10 Ø25 SIDE WALL CONNECTION Material: AISI 304 stainless steel Features: Ø42 by 55 mm connection for fixing the track to the wall with an M8 cheese-head screw with hexagon socket for key Ch4. Finish: mill finish 10 55 30 15 Ø42 39.5 Ø30 Ø25 M8 25 30 GLM8300A 1 Pc DOUBLE CEILING CONNECTION Material: AISI 304 stainless steel Features: double ceiling connection to fix two tracks in parallel with 43 mm constant centre-tocentre and a distance of 74 mm from the track axis to the ceiling. Anchoring to the ceiling via two M8 countersunk screws, located at a centre-to-centre distance of 50 mm. Finish: mill finish 96.6 Ø25 Ø8 70 50 Ø8 Ø25 8 6.4 74.2 22.4 Ø25 40 10 GLM742B 74 Ø44.7 1 Pc END STOP Material: AISI 304 stainless steel Features: end stop to be applied to the Ø25 mm round track equipped with 2 black PVC bushings to cushion the impact with the carriages. Finish: mill finish 21 39 61 37 33 23 LEFT GLMBLCDX GLMBLCSX Ø11 20 1 Pc 1 Pc 256 >>> PRICE LIST REFERENCE PAGE 48 >>> ADJUSTABLE LOWER GUIDE Material: zamak Features: glass passage guide adjustable via a simple Phillips screwdriver. Dimensions W 50 x D 35 mm for glass: 6/12.7 mm Finish: matt aluminium, polished aluminium, stainless steel imitation aluminium 50 For glass 057.3030.071 6/12.7 mm 1 Pc 26 35 6/12.7 Ø4 4 Ø4 37 Ø4
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 2000 DAMPED END STOP Material: AISI 304 stainless steel Features: end stop to be applied to the Ø25 mm round track equipped with adjustable shock absorber to cushion the impact with the carriages. Finish: mill finish 27 23±2 42 Ø25 27 43 Ø32 15 23±2 Ø7 GLMMOLL ADJUSTMENT ASSEMBLY STAGE - STEP 1 COMPLETE CONNECTIONS 1 Pc 150 C C C B A NOT COMPLETE CONNECTIONS (only the wall's part) 59 44 15 h = OPENING HEIGHT + A OPENING HEIGHT OPENING WIDTH 27 43 27 28 POSITIONATED FLOOR GUIDE ASSEMBLY STAGE - STEP 2 ASSEMBLY STAGE - STEP 3 COMPLETE CONNECTIONS MOUNTING AREA FOR GLASS PANNEL floor guide >>> PRICE LIST REFERENCE PAGE 48 >>> 257
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 2000 Maximum opening width 1000 mm GLM20002MUR GLMCAV2 Tubular track 1Pc GLM33M5 Wall connection 4Pc min GLMBLCDX End stop RIGHT 1Pc GLMBLCSX End stop LEFT 1Pc GLM2000 Pair of 2000 carriages 1Pair 057,3030,071 Floor guide 1Pc Maximum opening width 1500 mm GLM20003MUR GLMCAV3 Tubular track 1Pc GLM33M5 Wall connection 6Pc min GLMBLCDX End stop RIGHT 1Pc GLMBLCSX End stop LEFT 1Pc GLM2000 Pair of 2000 carriages 1Pair 057,3030,071 Floor guide 1Pc Maximum opening width 2000 mm GLM20004MUR GLMCAV4 Tubular track 1Pc GLM33M5 Wall connection 8Pc min GLMBLCDX End stop RIGHT 2Pc GLMBLCSX End stop LEFT 2Pc GLM2000 Pair of 2000 carriages 2Pairs 057,3030,071 Floor guide 2Pc 258 >>> PRICE LIST REFERENCE PAGE 48/49 >>>
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 2000 Maximum opening width 1000 mm GLM20002VET GLMCAV2 Tubular track 1Pc GLM33VT Glass connection 4Pc min GLMBLCDX End stop RIGHT 1Pc GLMBLCSX End stop LEFT 1Pc GLM2000 Pair of 2000 carriages 1Pair 057,3030,071 Floor guide 1Pc Maximum opening width 1500 mm GLM20003VET GLMCAV3 Tubular track 1Pc GLM33VT Glass connection 6Pc min GLMBLCDX End stop RIGHT 1Pc GLMBLCSX End stop LEFT 1Pc GLM2000 Pair of 2000 carriages 1Pair 057,3030,071 Floor guide 1Pc Maximum opening width 2000 mm GLM20004VET GLMCAV4 Tubular track 1Pc GLM33VT Glass connection 8Pc min GLMBLCDX End stop RIGHT 2Pc GLMBLCSX End stop LEFT 2Pc GLM2000 Pair of 2000 carriages 2Pairs 057,3030,071 Floor guide 2Pc >>> PRICE LIST REFERENCE PAGE 49 >>> 259
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 2000 opening width opening height To make a door and estimate one needs to know the clearance dimensions i.e. the height and width needed to determine the geometric features of the glass panel. Consequently the choice of the sliding track depends on the width of the opening according to the recommended diagrams: - 2000 mm TRACK (art. GLMCAV2) = MAX OPENING WIDTH 1000 mm - 3000 mm TRACK (art. GLMCAV3) = MAX OPENING WIDTH 1500 mm - 4000 mm TRACK (art. GLMCAV4 for double door) = MAX OPENING WIDTH 2000 mm RECOMMENDED DIAGRAM FOR SINGLE DOOR WALL/FIXED GLASS CONNECTION BAR FIXING A 150 C The diagram shows the bar assembly for SINGLE DOOR wall/fixed glass connection. To position the first hole one must consider height A (recommended 60 mm) from the upper edge of the opening and B (recommended 100 mm) from the side edge of the opening. The other holes will consequently result from the choice of value C. OPENING HEIGHT + A = h OPENING HEIGHT A 31 30 B 50 - For 2000 mm track: C (recommended) = 560 mm with minimum 4 connections - For 3000 mm track: C (recommended) = 540 mm with minimum 6 connections RECOMMENDED DIAGRAM FOR DOUBLE DOOR WALL/FIXED GLASS CONNECTION BAR FIXING C middle axis opening width A 31 A 31 OPENING HEIGHT + A = h OPENING HEIGHT 50 50 The diagram shows the bar assembly for DOUBLE DOOR wall/fixed glass connection. To install the bar one must consider height A (recommended 60 mm) from the upper edge of the opening and subsequently position it making its middle coincide with the middle of the opening width. The other holes will consequently result from the choice of value C. - For 3000 mm track: C (recommended) = 540 mm with minimum 6 connections - For 4000 mm track: C (recommended) = 530 mm with minimum 8 connections 260
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 2000 DIAGRAM RECOMMENDED TO CALCULATE SINGLE DOOR GLASS PANELS HEIGHT AND DRILLING C= min 55 mm. D= min 75 mm. 63 A Ø19 51 Ø19 OPENING HEIGHT + A = h OPENING HEIGHT 23 H glass = h 36 C Ø19 50 If Lv Ø19 D 7 4 35 Lv = Opening width + 80 If = Lv - (C+D) To determine the height of the glass panel, proceed as follows: measure from the centre of the hole, where the spacer for the track will be positioned, to the floor and subtract 36 mm. From the figure one can deduce that the track is placed at a predetermined height A where the hole to be made is recommended 60 mm above the clearance space: this is to make the glass panel overlap by about 31 mm from the upper edge of the opening. Knowing the clearance height measurement and knowing that the track is placed at distance A, one must simply calculate the following: OPENING HEIGHT + A (recommended 60 mm) 36 mm = GLASS PANEL HEIGHT. This applies only if one observes the position of the track. To determine the width of the glass panel, proceed as follows: measure the width of the opening and add 80 mm. The figure describes the glass panel drilling diagram in the event of right to left closing, considering an overlap of 50 mm on the and 30 mm on the other. In the opposite case the diagram must be read the other way around i.e. the right side will become the left and the left side will become the right. Please note that the glass must always stay within the appropriate floor guide, and that the door pulling handle may in some cases cause variations in the passage opening. 26 50 screw M4 261
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 2000 DIAGRAM RECOMMENDED TO CALCULATE DOUBLE DOOR GLASS PANELS HEIGHT AND DRILLING 63 C= min 55 mm. D= min 75 mm. If used GLMECC6: C= min 52 mm. D= min 78 mm. A Ø19 51 Ø19 Ø19 51 Ø19 OPENING HEIGHT + A = h OPENING HEIGHT 23 H glass = h 36 D Ø19 50 If Lv Ø19 C C Ø19 If Lv 50 Ø19 D 7 4 35 Lv = (Opening width + 95)/2 If = Lv - (C+D) To determine the height of the glass panel, proceed as follows: measure from the centre of the hole, where the spacer for the track will be positioned, to the floor and subtract 36 mm. From the figure one can deduce that the track is placed at a predetermined height A where the hole to be made is recommended 60 mm above the clearance space: this is to make the glass panel overlap by about 31 mm from the upper edge of the opening. Knowing the clearance height measurement and knowing that the track is placed at distance A, one must simply calculate the following: OPENING HEIGHT + A (recommended 60 mm) 36 mm = GLASS PANEL HEIGHT. This applies only if one observes the position of the track. To determine the width of the single glass panel, proceed as follows: measure the width of the opening, add 95 mm and divide the result by 2. The figure describes the glass panel drilling diagram, considering an overlap of 50 mm on the and 30 mm on the other. Please note that the glass must always stay within the appropriate floor guide, and that the door pulling handle may in some cases cause variations in the passage opening. 26 50 screw M4 262
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 3000 263
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 3000 MODEL GIUMAX 3000 Sliding system design made of AISI 304 steel, which differs from the existing ones as it consists of at least 2 sliding carriages on a Ø20 mm round section track. Each carriage features slots and grub screws for the various adjustments, supplied with PVC washer for 8 mm glass thickness plus shims for 6 + 10 mm. For different thicknesses see the table: GLASS THICKNESS Cylindrical Hole Th 6 mm Th 10 mm GLM6V replacing the PVC washer GLM10V replacing the PVC washer Countersunk Hole Th 10 mm Countersink 3 mm Th 12 mm Countersink 3 mm Bar finish: satin-finished steel, polished steel Accessories finish: mill finish, polished steel GLMSVA replacing the cylindrical bushing GLMSVA replacing the cylindrical bushing Spanner recommended for assembly: The Kit includes: 2/4 carriages, a choice of 2, 3 and 4 metre track with relative wall or glass connections, end stops, floor guide/s. Dimensions UT200 Pin Ø1.9 mm 1 Pc PAIR OF 3000 CARRIAGES Material: AISI 304 stainless steel Features: pair of carriages for door movement on a round section track with bracket and visible bosses with trapezoidal groove roller for Ø20. Each carriage features slots and grub screws for the various adjustments. Finish: mill finish, polished steel Glass hole recommended Ø18 mm. 13 34.5 R16.1 77±2 37.5 12 Ø16.2 176.7 45±2 S 17.5 Ø16.2 R16.1 Supplied with bosses as standard Glass thickness Glass hole GLM3000 S = 6/10 mm. Ø18 mm 1 Pair SOLID ROUND TRACK - Finish: satin-finished steel, polished steel Bar drilling diagram B A A For the polished steel finish only up to L = 3000 mm Bar length No. of Holes Dimensions GLMTND20 2000 mm 5 holes A 450 mm B 100 mm 1 Pc GLMTND30 3000 mm 6 holes A 560 mm B 100 mm 1 Pc GLMTND40 4000 mm 7 holes A 633 mm B 100 mm 1 Pc 264 >>> PRICE LIST REFERENCE PAGE 49 >>>
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 3000 WALL CONNECTION Material: AISI 304 stainless steel - Features: connection for fixing the track to the wall with boss and Ø28 mm neck, 13.5 mm long and an M6x60 mm cheese-head screw with hexagon socket for key Ch5. Finish: mill finish, polished steel 37 18 Ø 20 GLMBRM The quantity is determined according to the amount of holes in the track 1 Pc GLASS CONNECTION Material: AISI 304 stainless steel - Features: connection for fixing the track to the glass with boss and Ø28 mm neck, 13.5 mm long and an M6x30 mm cheese-head screw with hexagon socket for key Ch5, for glass thickness 8/10 mm. In the event of different thicknesses one must assess the right length of the screw. - Glass hole recommended Ø17 mm. Finish: mill finish, polished steel 8/10 18.5 Ø 20 GLMBRV The quantity is determined according to the amount of holes in the track 1 Pc SIDE WALL CONNECTION Material: AISI 304 stainless steel - Features: connection for fixing the track to the wall laterally with slotted bushing for adjustments and an M8x35 mm cheese-head screw with hexagon socket for key Ch6. Finish: mill finish, polished steel 23 Ø 30 8±3 22 43 GLMDSTP 1 Pc SIDE GLASS CONNECTION Material: AISI 304 stainless steel - Features: connection for fixing the track to the glass laterally with M8 feed-through threaded bushing and steel screw with Ø25 mm head and 4 x Ø2 mm dead holes with 16 mm centre-to-centre. Glass hole recommended Ø15 mm. Variable glass thickness 8/15 mm. Finish: mill finish, polished steel Ø15 8/15 24 Ø 30 GLMDSTV 1 Pc 44 OVAL END STOP Material: AISI 304 stainless steel Features: end stop to be applied to the Ø20 mm round track equipped with 1 black rubber bushing to cushion the impact with the carriages. Finish: mill finish, polished steel 6 15 Ø20 32 12.3 35 24 GLM3023 1 Pc ADJUSTABLE LOWER GUIDE Material: zamak Features: glass passage guide adjustable via a simple Phillips screwdriver. Dimensions W 50 x D 35 mm for glass: 6/12.7 mm Finish: matt aluminium, polished aluminium, stainless steel imitation aluminium 26 35 6/12.7 Ø4 4 Ø4 37 50 Ø4 For glass 057.3030.071 6/12.7 mm 1 Pc >>> PRICE LIST REFERENCE PAGE 49/50 >>> 265
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 3000 Maximum opening width 1000 mm GLM30002MUR GLMTND20 Solid round track 1Pc GLMBRM Wall connection 5Pc GLM3023 Oval end stop 2Pc GLM3000 Pair of 3000 carriages 1Pair 057,3030,071 Floor guide 1Pc optional GLMDSTP Side wall connection 1/2Pc GLMDSTV Side glass connection 1/2Pc GLMSVA Bushing for count.nk hole 4Pc Maximum opening width 1500 mm GLM30003MUR GLMTND30 Solid round track 1Pc GLMBRM Wall connection 6Pc GLM3023 Oval end stop 2Pc GLM3000 Pair of 3000 carriages 1Pair 057,3030,071 Floor guide 1Pc optional GLMDSTP Side wall connection 1/2Pc GLMDSTV Side glass connection 1/2Pc GLMSVA Bushing for count.nk hole 4Pc Maximum opening width 2000 mm GLM30004MUR GLMTND40 Solid round track 1Pc GLMBRM Wall connection 7Pc GLM3023 Oval end stop 4Pc GLM3000 Pair of 3000 carriages 2Pairs 057,3030,071 Floor guide 2Pc optional GLMDSTP Side wall connection 1/2Pc GLMDSTV Side glass connection 1/2Pc GLMSVA Bushing for count.nk hole 8Pc 266 >>> PRICE LIST REFERENCE PAGE 50 >>>
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 3000 Maximum opening width 1000 mm GLM30002VET GLMTND20 Solid round track 1Pc GLMBRV Glass connection 5Pc GLM3023 Oval end stop 2Pc GLM3000 Pair of 3000 carriages 1Pair 057,3030,071 Floor guide 1Pc optional GLMDSTP Side wall connection 1/2Pc GLMDSTV Side glass connection 1/2Pc GLMSVA Bushing for count.nk hole 4Pc Maximum opening width 1500 mm GLM30003VET GLMTND30 Solid round track 1Pc GLMBRV Glass connection 6Pc GLM3023 Oval end stop 2Pc GLM3000 Pair of 3000 carriages 1Pair 057,3030,071 Floor guide 1Pc optional GLMDSTP Side wall connection 1/2Pc GLMDSTV Side glass connection 1/2Pc GLMSVA Bushing for count.nk hole 4Pc Maximum opening width 2000 mm GLM30004VET GLMTND40 Solid round track 1Pc GLMBRV Glass connection 7Pc GLM3023 Oval end stop 4Pc GLM3000 Pair of 3000 carriages 2Pairs 057,3030,071 Floor guide 2Pc optional GLMDSTP Side wall connection 1/2Pc GLMDSTV Side glass connection 1/2Pc GLMSVA Bushing for count.nk hole 8Pc >>> PRICE LIST REFERENCE PAGE 50 >>> 267
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 3000 opening width opening height To make a door and estimate one needs to know the clearance dimensions i.e. the height and width needed to determine the geometric features of the glass panel. Consequently the choice of the sliding track depends on the width of the opening according to the recommended diagrams: - 2000 mm TRACK (art. GLMTND 20) = MAX OPENING WIDTH 1000 mm - 3000 mm TRACK (art. GLMTND 30) = MAX OPENING WIDTH 1500 mm - 4000 mm TRACK (art. GLMTND 40 for double door) = MAX OPENING WIDTH 2000 mm RECOMMENDED DIAGRAM FOR SINGLE DOOR WALL/FIXED GLASS CONNECTION BAR FIXING A 100 A The diagram shows the bar assembly for SINGLE DOOR wall/fixed glass connection. To position the first hole one must consider height A (recommended 50 mm) from the upper edge of the opening and B (recommended 70 mm) from the side edge of the opening. The other holes will consequently result from the choice of the pre-drilled bar supplied. B 20 50 5 18 OPENING HEIGHT + A = h 5 OPENING HEIGHT 22.5±5 17 RECOMMENDED DIAGRAM FOR DOUBLE DOOR WALL/FIXED GLASS CONNECTION BAR FIXING OPENING HEIGHT + A = h A OPENING HEIGHT 50 17 middle axis opening width 17 50 The diagram shows the bar assembly for DOUBLE DOOR wall/fixed glass connection. To install the bar one must consider height A (recommended 50 mm) from the upper edge of the opening and subsequently position it making its middle coincide with the middle of the opening width. The holes centre-to-centre distance can be achieved from the 4000 mm predrilled bar. ADJUSTMENT 268
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 3000 DIAGRAM RECOMMENDED TO CALCULATE SINGLE DOOR GLASS PANELS HEIGHT AND DRILLING C= min 45 mm. D= min 75 mm. To determine the height of the glass panel, proceed as follows: measure from the centre of the hole, where the spacer for the track will be positioned, to the floor and subtract 43 mm. Diagram with normal holes Optional Diagram with countersunk holes GLMSVA OPENING HEIGHT + A = h OPENING HEIGHT H glass = h 43 Lv = Opening width + 70 If = Lv - (C+D) From the figure one can deduce that the track is placed at a predetermined height A where the hole to be made is recommended 50 mm above the clearance space: this is to make the glass panel overlap by about 17 mm from the upper edge of the opening. Knowing the clearance height measurement and knowing that the track is placed at distance A, one must simply calculate the following: OPENING HEIGHT + A (recommended 50 mm) 43 mm = GLASS PANEL HEIGHT. Ø18 Ø12 countersunk 3 mm Ø18 This applies only if one observes the position of the track. countersunk 3 mm To determine the width of the glass panel, proceed as follows: measure the width of the opening and add 70 mm. Ø18 Ø12 Ø18 The figure describes the glass panel drilling diagram in the event of right to left closing, considering an overlap of 50 mm on the and 20 mm on the other. In the opposite case the diagram must be read the other way around i.e. the right side will become the left and the left side will become the right. Please note that the glass must always stay within the appropriate floor guide, and that the door pulling handle may in some cases cause variations in the passage opening. 26 50 screw M4 269
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 3000 DIAGRAM RECOMMENDED TO CALCULATE DOUBLE DOOR GLASS PANELS HEIGHT AND DRILLING C= min 55 mm. D= min 75 mm. 39 A Ø18 44 Ø18 Ø18 44 Ø18 Ø18 45 Ø18 Ø18 45 Ø18 OPENING HEIGHT + A = h OPENING HEIGHT 22 H glass = h 43 D If Lv C C If Lv D 7 4 35 Lv = (Opening width + 95)/2 If = Lv - (C+D) To determine the height of the glass panel, proceed as follows: measure from the centre of the hole, where the spacer for the track will be positioned, to the floor and subtract 43 mm. Diagram with normal holes Optional Diagram with countersunk holes GLMSVA From the figure one can deduct that the track is located at a predetermined height A where the hole to be made is recommended 50 mm above the clearance space; this is in order to make the glass panel overlap by about 17 mm from the upper edge of the opening. countersunk 3 mm OPENING HEIGHT + A (recommended 50 mm) 43 mm = GLASS PANEL HEIGHT. Ø18 Ø12 Ø18 This applies only if one observes the position of the track. To determine the width of the single glass panel, proceed as follows: measure the width of the opening, add 95 mm and divide the result by 2. Ø18 The figure describes the glass panel drilling diagram, considering an overlap of 50 mm on the. Please note that the glass must always stay within the appropriate floor guide, and that the door pulling handle may in some cases cause variations in the passage opening. 26 Ø12 countersunk 3 mm Ø18 50 screw M4 270
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 3200 271
Ø2 CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 3200 MODEL GIUMAX 3200 Sliding system design made of AISI 304 steel, consisting of a sliding mechanism with staggered rollers placed on a track with a Ø20 mm round section. The extremely versatile system is made up of a basic kit with 2/3 rollers with Ø30 mm groove made of special black plastic plus 2/3 x Ø25 mm stainless steel grooved rollers up to a variable amount requested by the customer. Suitable for glass thickness 6/12.7 mm. Bar finish: satin-finished steel, polished steel Accessories finish: mill finish, polished steel The Kit includes: minimum 2/3+2/3 grooved rollers, a choice of a 2, 3 or 4 m long track with its relevant ceiling connections, end stops, floor guide/s. Spanner recommended for assembly: Dimensions UT200 Pin Ø1.9 mm 1 Pc 7000 ROLLER CARRIAGES Material: AISI 304 stainless steel Features: roller carriages for moving the door on a round section track of which 2/3 rollers with Ø30 mm trapezoidal groove and 2/3 anti-slippage rollers with radial groove R10 mm depending on the weight of the panel. Finish: mill finish, polished steel Glass Ø12 mm holes recommended for upper rollers Glass Ø17 mm holes recommended for lower rollers 17 Ø10 Ø12 Ø30 Ø2 17 40 23 Ø20 Ø10 Ø17 16 16 30 4.5 Ø25 Number of Rollers Glass Thickness GLM7000 2+2 6/12.7 mm 1 Set 272 >>> PRICE LIST REFERENCE PAGE 51 >>>
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 3200 SOLID ROUND TRACK Finish: satin-finished steel, polished steel For the polished steel finish only up to L = 3000 mm Bar drilling diagram B A A Bar length No. of Holes Dimensions GLMTND20 2000 mm 5 holes A 450 mm B 100 mm 1 Pc GLMTND30 3000 mm 6 holes A 560 mm B 100 mm 1 Pc GLMTND40 4000 mm 7 holes A 633 mm B 100 mm 1 Pc WALL CONNECTION Material: AISI 304 stainless steel - Features: connection for fixing the track to the wall with boss and Ø28 mm neck, 13.5 mm long and an M6x60 mm cheese-head screw with hexagon socket for key Ch5. Finish: mill finish, polished steel 37 Ø 20 18 GLMBRM The quantity is determined according to the amount of holes in the track 1 Pc SIDE WALL CONNECTION Material: AISI 304 stainless steel - Features: connection for fixing the track to the wall laterally with slotted bushing for adjustments and an M8x35 mm cheese-head screw with hexagon socket for key Ch6. Finish: mill finish, polished steel 23 Ø 30 8±3 22 43 GLMDSTP 1 Pc SIDE GLASS CONNECTION Material: AISI 304 stainless steel - Features: connection for fixing the track to the glass laterally with M8 feed-through threaded bushing and steel screw with Ø25 mm head and 4 x Ø2 mm dead holes with 16 mm centre-to-centre. Glass hole recommended Ø15 mm. Variable glass thickness 8/15 mm. Finish: mill finish, polished steel Ø15 8/15 24 Ø 30 GLMDSTV 1 Pc 44 END STOP Material: AISI 304 stainless steel Features: steel washer to be applied as a both right and left Ø28 mm end stop. Finish: mill finish, polished steel Ø20.4 10 Ø28 3.1 M5 10 10.5 GLM3020 1 Pc ADJUSTABLE LOWER GUIDE Material: zamak Features: glass passage guide adjustable via a simple Phillips screwdriver. Dimensions W 50 x D 35 mm for glass: 6/12.7 mm Finish: matt aluminium, polished aluminium, stainless steel imitation aluminium 26 35 6/12.7 Ø4 4 Ø4 37 50 Ø4 For glass 057.3030.071 6/12.7 mm 1 Pc >>> PRICE LIST REFERENCE PAGE 51 >>> 273
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 3200 Maximum opening width 1000 mm GLM32002PAR GLMTND20 Solid round track 1Pc GLMBRM Wall connection 5Pc GLM3020 End stop 2Pc GLM7000 7000 roller carriages 1Set 057,3030,071 Floor guide 1Pc GLMRCT Roller with trapezoidal groove 1Pc GLMAN Anti-slippage roller 1Pc optional GLMDSTP Side wall connection 1/2Pc GLMDSTV Side glass connection 1/2Pc GLMSST Ceiling connection 5Pc Maximum opening width 1500 mm GLM32003PAR GLMTND30 Solid round track 1Pc GLMBRM Wall connection 6Pc GLM3020 End stop 2Pc GLM7000 7000 roller carriages 1Set 057,3030,071 Floor guide 1Pc GLMRCT Roller with trapezoidal groove 1Pc GLMAN Anti-slippage roller 1Pc optional GLMDSTP Side wall connection 1/2Pc GLMDSTV Side glass connection 1/2Pc GLMSST Ceiling connection 6Pc Maximum opening width 2000 mm GLM32004PAR GLMTND40 Solid round track 1Pc GLMBRM Wall connection 7Pc GLM3020 End stop 4Pc GLM7000 7000 roller carriages 2Set 057,3030,071 Floor guide 2Pc GLMRCT Roller with trapezoidal groove 2Pc GLMAN Anti-slippage roller 2Pc optional GLMDSTP Side wall connection 1/2Pc GLMDSTV Side glass connection 1/2Pc GLMSST Ceiling connection 7Pc 274 >>> PRICE LIST REFERENCE PAGE 51 >>>
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 3200 opening width opening height To make a door and estimate one needs to know the clearance dimensions i.e. the height and width needed to determine the geometric features of the glass panel. Consequently the choice of the sliding track depends on the width of the opening according to the recommended diagrams: - 2000 mm TRACK (art. GLMTND 20) = MAX OPENING WIDTH 1000 mm - 3000 mm TRACK (art. GLMTND 30) = MAX OPENING WIDTH 1500 mm - 4000 mm TRACK (art. GLMTND 40 for double door) = MAX OPENING WIDTH 2000 mm RECOMMENDED DIAGRAM FOR SINGLE DOOR WALL CONNECTION BAR FIXING B A 100 B A The diagram shows the bar assembly for SINGLE DOOR wall/fixed glass connection. To position the first hole one must consider height A (recommended 50 mm) from the upper edge of the opening and C (recommended 70 mm) from the side edge of the opening. The other holes will consequently result from the choice of the pre-drilled bar supplied. These are the recommended indications. OPENING HEIGHT + A = h OPENING HEIGHT C 20 50 The position of the other connections depends on the choice of the pre-drilled bar. B = minimum 50 mm RECOMMENDED DIAGRAM FOR DOUBLE DOOR WALL CONNECTION BAR FIXING B A OPENING HEIGHT + A = h OPENING HEIGHT 50 50 middle axis opening width The diagram shows the bar assembly for DOUBLE DOOR wall/fixed glass connection. To install the bar one must consider height A (recommended 50 mm) from the upper edge of the opening and subsequently position it making its middle coincide with the middle of the opening width. The holes centre-to-centre distance can be achieved from the 4000 mm pre-drilled bar. 275
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 3200 DIAGRAM RECOMMENDED TO CALCULATE SINGLE DOOR GLASS PANELS HEIGHT AND DRILLING H glass = h - 7 + B B A OPENING HEIGHT + A = h OPENING HEIGHT 7 35 35 4 B = minimum 50 mm C E 40 27 If Lv Lv = Opening width + 70 If = Lv - (C+D) E = If / 2+C F = If / 2+D F D To determine the height of the glass panel, proceed as follows: measure from the centre of the hole, where the spacer for the track will be positioned, to the floor, subtract 7 mm and add B (min. 50 mm) From the figure one can deduce that the track is placed at a predetermined height A where the hole to be made is recommended 50 mm above the clearance space. Knowing the clearance height measurement and knowing that the track is placed at distance A, one must simply calculate the following: OPENING HEIGHT + A (recommended 50 mm) 7 mm + B (min. 50 mm) = GLASS PANEL HEIGHT. This applies only if one observes the position of the track. To determine the width of the glass panel, proceed as follows: measure the width of the opening and add 70 mm. The figure describes the glass panel drilling diagram in the event of right to left closing, considering an overlap of 50 mm on the and 20 mm on the other. In the opposite case the diagram must be read the other way around i.e. the right side will become the left and the left side will become the right. DIAGRAM RECOMMENDED TO CALCULATE DOUBLE DOOR GLASS PANELS HEIGHT AND DRILLING H glass = h - 7 + B OPENING HEIGHT + A = h B A OPENING HEIGHT 35 D F Lv If 27 40 E C B = minimum 50 mm E F 27 40 C If D Lv To determine the height of the glass panel, proceed as follows: measure from the centre of the hole, where the spacer for the track will be positioned, to the floor, subtract 7 mm and add B (min. 50 mm) From the figure one can deduce that the track is placed at a predetermined height A where the hole to be made is recommended 50 mm above the clearance space. Knowing the clearance height measurement and knowing that the track is placed at distance A, one must simply calculate the following: OPENING HEIGHT + A (recommended 50 mm) 7 mm + B (min. 50 mm) = GLASS PANEL HEIGHT. 7 35 4 Lv = (Opening width + 95)/2 If = Lv - (C+D) E = If / 2+C F = If / 2+D This applies only if one observes the position of the track. To determine the width of the single glass panel, proceed as follows: measure the width of the opening, add 95 mm and divide the result by 2. The figure describes the glass panel drilling diagram, considering an overlap of 50 mm on the. Please note that the glass must always stay within the appropriate floor guide, and that the door pulling handle may in some cases cause variations in the passage opening. 26 50 screw M4 276
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 3500 277
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 3500 MODEL GIUMAX 3500 WOOD Sliding system design made of AISI 304 steel, which differs from the existing ones as it consists of at least 2 sliding carriages on a Ø20 mm round section track. Each carriage features slots and grub screws for the various adjustments. Bar finish: satin-finished steel, polished steel Accessories finish: mill finish, polished steel The Kit includes: 2/4 carriages, a choice of a 2, 3 or 4 m long track with its relevant wall connections, end stops, floor guide/s. Spanner recommended for assembly: Dimensions UT200 Pin Ø1.9 mm 1 Pc PAIR OF 3500 WOOD CARRIAGES Material: AISI 304 stainless steel Features: pair of carriages for door movement on a round section track with bracket with visible bosses and roller with trapezoidal groove for Ø20. Each carriage features slots and grub screws for the various adjustments. Finish: satin-finished steel, polished steel 19 35 6 16±5 R16 87 40±5 48 6 viti M6 GNW3500 1 Pair 25 15 15 62 92 30 32 SOLID ROUND TRACK - Finish: satin-finished steel, polished steel Bar drilling diagram B A A For the polished steel finish only up to L = 3000 mm Bar length No. of Holes Dimensions GLMTND20 2000 mm 5 holes A 450 mm B 100 mm 1 Pc GLMTND30 3000 mm 6 holes A 560 mm B 100 mm 1 Pc GLMTND40 4000 mm 7 holes A 633 mm B 100 mm 1 Pc WALL CONNECTION Material: AISI 304 stainless steel - Features: connection for fixing the track to the wall with boss and Ø28 mm neck, 13.5 mm long and an M6x60 mm cheese-head screw with hexagon socket for key Ch5. Finish: mill finish, polished steel 30 25 Ø20 278 GNW20 The quantity is determined according to the amount of holes in the track 1 Pc >>> PRICE LIST REFERENCE PAGE 52 >>>
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 3500 SIDE WALL CONNECTION Material: AISI 304 stainless steel - Features: connection for fixing the track to the wall laterally with slotted bushing for adjustments and an M8x35 mm cheese-head screw with hexagon socket for key Ch6. Finish: mill finish, polished steel 23 Ø 30 8±3 22 43 GLMDSTP SIDE GLASS CONNECTION Material: AISI 304 stainless steel - Features: connection for fixing the track to the glass laterally with M8 feed-through threaded bushing and steel screw with Ø25 mm head and 4 x Ø2 mm dead holes with 16 mm centre-to-centre. Glass hole recommended Ø15 mm. Variable glass thickness 8/15 mm. Finish: mill finish, polished steel Ø15 8/15 24 1 Pc Ø 30 44 GLMDSTV Ø20 1 Pc OVAL END STOP Material: AISI 304 stainless steel Features: end stop to be applied to the Ø20 mm round track equipped with 1 black rubber bushing to cushion the impact with the carriages. Finish: mill finish, polished steel 6 32 15 35 12.3 24 GLM3023 1 Pc LOWER GUIDE Material: plastic Features: slotted floor guide to be floor mounted with minimum 2 x M4 countersunk screws Finish: black 30 27 4 53 65 20 4 11 Ø4.3 16 28 20 057.3010.001 1 Pc >>> PRICE LIST REFERENCE PAGE 52 >>> 279
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 3500 Maximum opening width 1000 mm GNW35002 GLMTND20 Solid round track 1Pc GNW20 Wall connection 5Pc GLM3023 Oval end stop 2Pc GNW3500 Pair of 3500 carriages 1Pair 057,3010,001 Floor guide 1Pc optional GLMDSTP Side wall connection 1/2Pc GLMDSTV Side glass connection 1/2Pc Maximum opening width 1500 mm GNW35003 GLMTND30 Solid round track 1Pc GNW20 Wall connection 6Pc GLM3023 Oval end stop 2Pc GNW3500 Pair of 3500 carriages 1Pair 057,3010,001 Floor guide 1Pc optional GLMDSTP Side wall connection 1/2Pc GLMDSTV Side glass connection 1/2Pc Maximum opening width 2000 mm GNW35004 GLMTND40 Solid round track 1Pc GNW20 Wall connection 7Pc GLM3023 Oval end stop 4Pc GNW3500 Pair of 3500 carriages 2Pairs 057,3010,001 Floor guide 2Pc optional GLMDSTP Side wall connection 1/2Pc GLMDSTV Side glass connection 1/2Pc 280 >>> PRICE LIST REFERENCE PAGE 52 >>>
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 3500 opening width opening height To make a door and estimate one needs to know the clearance dimensions of the opening i.e. the height and width needed to determine the geometric features of the wooden panel. Consequently the choice of the sliding track depends on the width of the opening according to the recommended diagrams: - 2000 mm TRACK (art. GLMTND 20) = MAX OPENING WIDTH 1000 mm - 3000 mm TRACK (art. GLMTND 30) = MAX OPENING WIDTH 1500 mm - 4000 mm TRACK (art. GLMTND 40 for double door) = MAX OPENING WIDTH 2000 mm RECOMMENDED DIAGRAM FOR SINGLE DOOR WALL CONNECTION BAR FIXING OPENING HEIGHT + A = h A OPENING HEIGHT 25 15 7 42 24 100 62 62 44 92 30 B 50 vis M6 A 20 6 The diagram shows the bar assembly for SINGLE DOOR wall/fixed glass connection. To position the first hole one must consider height A (recommended 60 mm) from the upper edge of the opening and B (recommended 70 mm) from the side edge of the opening. The other holes will consequently result from the choice of the pre-drilled bar supplied. 10 22 RECOMMENDED DIAGRAM FOR DOUBLE DOOR WALL CONNECTION BAR FIXING - PANEL CALCULATION OPENING HEIGHT + A = h 25 A OPENING HEIGHT 10 15 7 5 18 5 22,5±5 22 42 6 vis M6 44 62 92 50 20 5 middle axis opening width 62 24 20 vis M6 6 62 44 92 50 The diagram shows the bar assembly for DOUBLE DOOR wall/fixed glass connection. To install the bar one must consider height A (recommended 60 mm) from the upper edge of the opening and subsequently position it making its middle coincide with the middle of the opening width. The holes centre-to-centre distance can be achieved from the 4000 mm predrilled bar. ADJUSTMENT 281
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 7000 CEILING MOUNTED 282
Ø2 CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 7000 CEILING MOUNTED MODEL GIUMAX 7000 Sliding system design made of AISI 304 steel, consisting of a sliding mechanism with staggered rollers placed on a track with a Ø20 mm round section. The extremely versatile system is made up of a basic kit with 2/3 rollers with Ø30 mm groove made of special black plastic plus 2/3 x Ø25 mm stainless steel grooved rollers up to a variable amount requested by the customer. Suitable for glass thickness 6/12.7 mm. Bar finish: satin-finished steel Accessories finish: mill finish The Kit includes: minimum 2/3+2/3 grooved rollers, a choice of a 2, 3 or 4 m long track with its relevant ceiling connections, end stops, floor guide/s. Spanner recommended for assembly: Dimensions UT200 Pin Ø1.9 mm 1 Pc 7000 ROLLER CARRIAGES Material: AISI 304 stainless steel Features: roller carriages for moving the door on a round section track of which 2/3 rollers with Ø30 mm trapezoidal groove and 2/3 anti-slippage rollers with radial groove R10 mm depending on the weight of the panel. Finish: mill finish, polished steel Glass Ø12 mm holes recommended for upper rollers Glass Ø17 mm holes recommended for lower rollers 17 Ø10 Ø12 Ø30 Ø2 17 40 23 Ø20 Ø10 Ø17 16 16 30 4.5 Ø25 Number of Rollers Glass Thickness GLM7000 2+2 6/12.7 mm 1 Set >>> PRICE LIST REFERENCE PAGE 53 >>> 283
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 7000 CEILING MOUNTED SOLID ROUND TRACK Finish: satin-finished steel, polished steel Bar drilling diagram B A A For the polished steel finish only up to L = 3000 mm Bar length No. of Holes Dimensions GLMTND20 2000 mm 5 holes A 450 mm B 100 mm 1 Pc GLMTND30 3000 mm 6 holes A 560 mm B 100 mm 1 Pc GLMTND40 4000 mm 7 holes A 633 mm B 100 mm 1 Pc CEILING CONNECTION Material: AISI 304 stainless steel Features: connection for fixing and positioning the track with adjustment slots and M8x80 countersunk screw for adjusting the surface on uneven points. Bracket thickness 6 mm. Total height: 130 mm. Finish: mill finish, polished steel 64.5 67 8±2.5 8±2.5 30 114 6±2.5 6±2.5 R16 61 GLMSST The quantity is determined according to the amount of holes in the track 1 Pc END STOP Material: AISI 304 stainless steel Features: steel washer to be applied as a both right and left Ø28 mm end stop. Finish: mill finish, polished steel Ø20.4 10 Ø28 3.1 M5 10 10.5 GLM3020 1 Pc GUIDE INFERIEUR REGLABLE Matériau: zamak Caractéristiques: guide au sol réglable avec un simple tournevis étoile. Dimensions L 50 x P 35 mm pour verre: 6/12.7 mm Finition: aluminium mat, aluminium brillant, aluminium effet inox 26 35 6/12.7 Ø4 4 Ø4 37 50 Ø4 For glass 057.3030.071 6/12.7 mm 1 Pc 284 >>> PRICE LIST REFERENCE PAGE 53 >>>
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 7000 CEILING MOUNTED Maximum opening width 1000 mm GLM70002PLA Ceiling connection GLMTND20 Solid round track 1Pc GLMSST Ceiling connection 5Pc GLM3020 End stop 2Pc GLM7000 7000 roller carriages 1set 057,3030,071 Floor guide 1Pc GLMRCT Roller with trapezoidal groove 1Pc GLMAN Anti-slippage roller 1Pc optional GLMDSTP Side wall connection 1/2Pc GLMDSTV Side glass connection 1/2Pc GLM3023 Oval end stop 2Pc Maximum opening width 1500 mm GLM70003PLA Ceiling connection accessories GLMTND30 Solid round track 1Pc GLMSST Ceiling connection 6Pc GLM3020 End stop 2Pc GLM7000 7000 roller carriages 1set 057,3030,071 Floor guide 1Pc GLMRCT Roller with trapezoidal groove 1Pc GLMAN Anti-slippage roller 1Pc optional GLMDSTP Side wall connection 1/2Pc GLMDSTV Side glass connection 1/2Pc GLM3023 Oval end stop 2Pc Maximum opening width 2000 mm GLM70004PLA Ceiling connection accessories GLMTND40 Solid round track 1Pc GLMSST Ceiling connection 7Pc GLM3020 End stop 4Pc GLM7000 7000 roller carriages 2set 057,3030,071 Floor guide 2Pc GLMRCT Roller with trapezoidal groove 2Pc GLMAN Anti-slippage roller 2Pc optional GLMDSTP Side wall connection 1/2Pc GLMDSTV Side glass connection 1/2Pc GLM3023 Oval end stop 4Pc >>> PRICE LIST REFERENCE PAGE 53 >>> 285
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 7000 CEILING MOUNTED opening width opening height To make a door and estimate one needs to know the clearance dimensions i.e. the height and width needed to determine the geometric features of the glass panel. Consequently the choice of the sliding track depends on the width of the opening according to the recommended diagrams: - 2000 mm TRACK (art. GLMTND 20) = MAX OPENING WIDTH 1000 mm - 3000 mm TRACK (art. GLMTND 30) = MAX OPENING WIDTH 1500 mm - 4000 mm TRACK (art. GLMTND 40 for double door) = MAX OPENING WIDTH 2000 mm RECOMMENDED DIAGRAM FOR SINGLE DOOR CEILING CONNECTION BAR FIXING 78 10 20 B 50 The diagram shows the bar assembly for SINGLE DOOR ceiling connection. To position the centre of the first ceiling connection (art. GLMSST) one must consider a distance B (recommended 70 mm) from the side edge of the opening and depending on the thickness of the glass panel one must come away from the wall by a distancea equal to: OPENING HEIGHT = h A WALL BORDER WALL BORDER glass 6 mm A = 96 mm (minimum) glass 8 mm A = 98 mm (minimum) glass 10 mm A = 100 mm (minimum) glass 11.5 mm A = 102 mm (minimum) glass 12 mm A = 102 mm (minimum) glass 12.7 mm A = 103 mm (minimum) These are the recommended indications. The position of the other connections depends on the choice of the pre-drilled bar. RECOMMENDED DIAGRAM FOR DOUBLE DOOR CEILING CONNECTION BAR FIXING 10 50 50 78 OPENING HEIGHT = h A WALL BORDER WALL BORDER middle axis opening width The diagram shows the bar assembly for DOUBLE DOOR ceiling connection. To position the bar (art. GLMTND40) one must make its middle coincide with the middle of the opening width. Depending on the thickness of the glass panel one must come away from the wall by a distance A equal to: glass 6 mm A = 96 mm (minimum) glass 8 mm A = 98 mm (minimum) glass 10 mm A = 100 mm (minimum) glass 11.5 mm A = 102 mm (minimum) glass 12 mm A = 102 mm (minimum) glass 12.7 mm A = 103 mm (minimum) These are the recommended indications. 286
CARRIAGES MADE OF AISI 304 - MOD. GIUMAX 7000 CEILING MOUNTED DIAGRAM RECOMMENDED TO CALCULATE SINGLE DOOR GLASS PANELS HEIGHT AND DRILLING E F To determine the height of the glass panel, proceed as follows: measure the height of the opening and subtract 17 mm. 82 Ø12 82 Knowing the height of the opening, one must simply calculate the following: 40 Ø17 40 Ø12 Ø17 Ø12 Ø17 OPENING HEIGHT -17 mm = GLASS PANEL HEIGHT. OPENING HEIGHT = h 4 7 H glass = h-17 C If Lv D Lv = Opening width + 70 If = Lv - (C+D) E = If / 2+C C= min 40 mm. F = If / 2+D D= min 70 mm. This is a guideline, where we have considered the position of the glass at a distance of 10 mm from the ceiling. To determine the width of the glass panel, proceed as follows: measure the width of the opening and add 70 mm. The figure describes the glass panel drilling diagram in the event of right to left closing, considering an overlap of 50 mm on the and 30 mm on the other. In the opposite case the diagram must be read the other way around i.e. the right side will become the left and the left side will become the right. DIAGRAM RECOMMENDED TO CALCULATE DOUBLE DOOR GLASS PANELS HEIGHT AND DRILLING 82 40 F Ø12 Ø17 82 40 Ø12 E Ø12 Ø17 Ø12 Ø17 E 82 40 Ø12 F Ø12 Ø17 To determine the height of the glass panel, proceed as follows: measure the height of the opening and subtract 17 mm. OPENING HEIGHT = h H glass = h-17 D Ø17 If Lv C C If Lv Ø17 D Knowing the height of the opening, one must simply calculate the following: OPENING HEIGHT -17 mm = GLASS PANEL HEIGHT. 4 35 7 Lv = (Opening width + 95)/2 If = Lv - (C+D) E = If / 2+C F = If / 2+D C= min 40 mm. D= min 70 mm. This is a guideline, where we have considered the position of the glass at a distance of 10 mm from the ceiling. To determine the width of the single glass panel, proceed as follows: measure the width of the opening, add 95 mm and divide the result by 2. The figure describes the glass panel drilling diagram, considering an overlap of 50 mm on the and 20 mm on the other. Please note that the glass must always stay within the appropriate floor guide, and that the door pulling handle may in some cases cause variations in the passage opening. 26 50 screw M4 287