16 88 / Series description: Wilo-Yonos MAXO /,5-1 1 Wilo-Yonos MAXO 1 5/,5-1 8 6 /,5-5/3/,5-7 5/3/,5-1 /5/,5-8 65/,5-9 5/,5-9 5/3/,5-1 5 1 15 5 Design Glandless circulation pump with threaded connection or flange connection, EC motor with automatic power adjustment. Application Hot-water heating systems of all kinds, air-conditioning systems, closed cooling circuits, industrial circulation systems. Type key Example: Wilo-Yonos MAXO 3/.5-1 Yonos MAXO High-efficiency pump (screw-end or flange-end pump), electronically controlled 3/ Nominal connection diameter.5-1 Nominal delivery head range [m] Special features/product advantages Maximum efficiency thanks to ECM technology LED display for showing delivery head setting Quick and convenient electrical connection with Wilo-Connector Collective fault signal on all types for assuring system availability Simple installation due to PN 6/PN 1 combination flanges (with DN to DN 65) Can be used in cooling/air-conditioning systems without ambient temperature limits Pump housing with cataphoretic coating for preventing corrosion due to condensation formation Equipment/function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure Manual functions Operating mode setting Setting of pump output (delivery head) Automatic functions Variable power adjustment depending on the operating mode Deblocking function Soft start Integrated full motor protection Signal and display functions Collective fault signal (potential-free NC contact) Fault signal light LED segment display for displaying the delivery head and fault codes Equipment Wrench attachment point on pump body (for threaded pipe union pumps) Quick electrical connection with Wilo-Connector. For the connection of the mains and SSM lines, with integrated strain relief For flange-end pumps: Flange versions Standard version for DN to DN 65 pumps: PN 6/1 combination flange (PN 16 flange according to EN 19-) for PN 6 and PN 16 counter flanges Scope of delivery Pump Including gaskets for threaded connection Incl. washers for flange screws (for nominal connection diameters DN - DN 65) Including installation and operating instructions Accessories Screwed connections for threaded connection Adapter fittings Thermal insulation Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 1 / 9
65/,5-9 ATAC Solutions 16 88 / Duty chart: Wilo-Yonos MAXO Pump curves /,5-1 1 Wilo-Yonos MAXO 1 5/3/,5-1 5/,5-1 8 /5/,5-8 5/3/,5-7 6 /,5-5/3/,5-1 5/,5-9 5 1 15 5 Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 / 9
16 88 / Product list: Wilo-Yonos MAXO Type Pipe connection Nominal flange diameter Rated pressure Overall length Mains connection Gross weight Art no. PN / bar l / mm m / kg Yonos MAXO 5/,5-7 Rp 1 1 18 1~3 V, 5/6 Hz 5.8 1639 Yonos MAXO 5/,5-1 Rp 1 1 18 1~3 V, 5/6 Hz 5.8 16 Yonos MAXO 5/,5-1 Rp 1 1 18 1~3 V, 5/6 Hz 6.9 161 Yonos MAXO 3/,5-7 Rp 1¼ 1 18 1~3 V, 5/6 Hz 5.9 16 Yonos MAXO 3/,5-1 Rp 1¼ 1 18 1~3 V, 5/6 Hz 5.9 163 Yonos MAXO 3/,5-1 Rp 1¼ 1 18 1~3 V, 5/6 Hz 7 16 Yonos MAXO /,5- DN 6/1 1~3 V, 5/6 Hz 1. 165 Yonos MAXO /,5-8 DN 6/1 1~3 V, 5/6 Hz 1.8 166 Yonos MAXO /,5-1 DN 6/1 5 1~3 V, 5/6 Hz 1.9 167 Yonos MAXO 5/,5-8 DN 5 6/1 1~3 V, 5/6 Hz 1.1 169 Yonos MAXO 5/,5-9 DN 5 6/1 8 1~3 V, 5/6 Hz 16.1 165 Yonos MAXO 5/,5-1 DN 5 6/1 8 1~3 V, 5/6 Hz 16.1 1651 Yonos MAXO 65/,5-9 DN 65 6/1 8 1~3 V, 5/6 Hz 18 1653 Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 3 / 9
16 88 / Data sheet: Wilo-Yonos MAXO 5/,5-7 Pump curves v 1 3 Rp 1 m/s,5 1, 1,5,,5 Rp 1¼ Wilo-Yonos MAXO p/kpa 7 5/,5-7, 3/,5-7 1~3 V - Rp 1, Rp 1¼ 7 6 5 3 1 Δp-c 15 1 3 5 6 7 1 5 Δp-v 15,,8 1, 1,6, Q/l/s, 1m 1 3 5 6 7 1 5 1 3 5 6 7 6 5 3 1 Approved fluids (other fluids on request) Heating water (in accordance with VDI 35) Water-glycol mixtures ( 1:1; above % admixture, the pumping data must be checked) Permitted field of application Temperature range at ambient temperature + C Maximum permissible operating pressure Pipe connections P max -...+11 C 1 bar Threaded pipe union Rp 1 Thread G 1½ Overall length l 18 mm Motor/electronics Energy efficiency index (EEI).3 Electromagnetic compatibility EN 618-3 Emitted interference EN 61-6-3 Interference resistance EN 61-6- Speed control Frequency converter Dimension drawing 51 51 G 1½ Protection class Insulation class IP XD F 18 9 9 Mains connection 1~3 V, 5/6 Hz Nominal motor power P 9 W Speed n 1-37 rpm 18 113 Power consumption P 1 5-1 W Current consumption I.8 -.9 A Motor protection integrated Terminal diagram 1~ 3 V, 5/6 Hz 3~3 V, 5/6 Hz Threaded cable connection PG Mx1.5 Materials L N PE SSM SSM: L1 L3 PE SSM L L3 L1 L Collective fault signal (NC contact according to VDI 381, load capacity 1 A, 5 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Pump housing Grey cast iron (EN-GJL-) Impeller Plastic (PPE - 3% GF) Pump shaft Stainless steel (X6Cr13) Bearing Carbon, metal impregnated Minimum suction head at suction port for avoiding cavitation at water pumping temperature Minimum suction head at 5 / 95 / 11 C.5 / 3 / 1 m Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 / 9
16 88 / Data sheet: Wilo-Yonos MAXO 5/,5-7 Information for order placements Make Wilo Type Yonos MAXO 5/,5-7 Art no. 1639 Weight approx. m.5 kg Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 5 / 9
16 88 / Data sheet: Wilo-Yonos MAXO 5/,5-1 Pump curves v 1 3 5 Rp 1 m/s,5 1, 1,5,,5 3, 3,5 Rp 1¼ Wilo-Yonos MAXO p/kpa 5/,5-1, 3/,5-1 1 1~3 V - Rp 1, Rp 1¼ 1 8 8 Approved fluids (other fluids on request) Heating water (in accordance with VDI 35) Water-glycol mixtures ( 1:1; above % admixture, the pumping data must be checked) 6 6 Permitted field of application Temperature range at ambient temperature + C -...+11 C Maximum permissible operating pressure P max 1 bar 6 8,5 1, 1,5,,5 Q/l/s Δp-c 15 1 5 Δp-v 15, 1m 1m 6 8 1 5 1m 6 8 1, Pipe connections Threaded pipe union Rp 1 Thread G 1½ Overall length l 18 mm Motor/electronics Energy efficiency index (EEI).3 Electromagnetic compatibility EN 618-3 Emitted interference EN 61-6-3 Interference resistance EN 61-6- Speed control Frequency converter Dimension drawing 51 51 G 1½ Protection class Insulation class IP XD F 18 9 9 113 Mains connection 1~3 V, 5/6 Hz Nominal motor power P 1 W Speed n 1 - rpm Power consumption P 1 5-19 W Current consumption I.8-1.3 A 18 Motor protection integrated Terminal diagram 1~ 3 V, 5/6 Hz 3~3 V, 5/6 Hz Threaded cable connection PG Mx1.5 Materials Pump housing Grey cast iron (EN-GJL-) L N PE SSM SSM: L1 L3 PE SSM L L3 L1 L Collective fault signal (NC contact according to VDI 381, load capacity 1 A, 5 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Impeller Plastic (PPE - 3% GF) Pump shaft Stainless steel (X6Cr13) Bearing Carbon, metal impregnated Minimum suction head at suction port for avoiding cavitation at water pumping temperature Minimum suction head at 5 / 95 / 11 C.5 / 3 / 1 m Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 6 / 9
16 88 / Data sheet: Wilo-Yonos MAXO 5/,5-1 Information for order placements Make Wilo Type Yonos MAXO 5/,5-1 Art no. 16 Weight approx. m.5 kg Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 7 / 9
16 88 / Data sheet: Wilo-Yonos MAXO 5/,5-1 Pump curves 1 8 v 1 3 5 6 1 3 Wilo-Yonos MAXO 5/,5-1, 3/,5-1 1~3 V - Rp 1, Rp 1¼ Rp 1 m/s Rp 1¼ p/kpa 1 8 Approved fluids (other fluids on request) Heating water (in accordance with VDI 35) Water-glycol mixtures ( 1:1; above % admixture, the pumping data must be checked) 6 6 Permitted field of application Temperature range at ambient temperature + C -...+11 C Maximum permissible operating pressure P max 1 bar Δp-c 3 6 8 1 1 Δp-v 3,5 1, 1,5,,5 3, Q/l/s, 1m 11m 1m 6 8 1 1 11m 1m 6 8 1 Pipe connections Threaded pipe union Rp 1 Thread G 1½ Overall length l 18 mm Motor/electronics Energy efficiency index (EEI).3 Electromagnetic compatibility EN 618-3 Emitted interference EN 61-6-3 Interference resistance EN 61-6- Speed control Frequency converter Dimension drawing 6 6 G 1½ Protection class Insulation class IP XD F Mains connection 1~3 V, 5/6 Hz 18 9 98 135 Nominal motor power P W Speed n 1-8 rpm Power consumption P 1 1-35 W Current consumption I.15-1.33 A 7 5 Motor protection integrated Terminal diagram 1~ 3 V, 5/6 Hz 3~3 V, 5/6 Hz Threaded cable connection PG Mx1.5 Materials Pump housing Grey cast iron (EN-GJL-) L N PE SSM SSM: L1 L3 PE SSM L L3 L1 L Collective fault signal (NC contact according to VDI 381, load capacity 1 A, 5 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Impeller Plastic (PPE - 3% GF) Pump shaft Stainless steel (X6Cr13) Bearing Carbon, metal impregnated Minimum suction head at suction port for avoiding cavitation at water pumping temperature Minimum suction head at 5 / 95 / 11 C.5 / 3 / 1 m Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 8 / 9
16 88 / Data sheet: Wilo-Yonos MAXO 5/,5-1 Information for order placements Make Wilo Type Yonos MAXO 5/,5-1 Art no. 161 Weight approx. m 5.3 kg Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 9 / 9
16 88 / Data sheet: Wilo-Yonos MAXO 3/,5-7 Pump curves v 1 3 Rp 1 m/s,5 1, 1,5,,5 Rp 1¼ Wilo-Yonos MAXO p/kpa 7 5/,5-7, 3/,5-7 1~3 V - Rp 1, Rp 1¼ 7 6 5 3 1 Δp-c 15 1 3 5 6 7 1 5 Δp-v 15,,8 1, 1,6, Q/l/s, 1m 1 3 5 6 7 1 5 1 3 5 6 7 6 5 3 1 Approved fluids (other fluids on request) Heating water (in accordance with VDI 35) Water-glycol mixtures ( 1:1; above % admixture, the pumping data must be checked) Permitted field of application Temperature range at ambient temperature + C Maximum permissible operating pressure Pipe connections Threaded pipe union P max -...+11 C 1 bar Rp 1¼ Thread G Overall length l 18 mm Motor/electronics Energy efficiency index (EEI).3 Electromagnetic compatibility EN 618-3 Emitted interference EN 61-6-3 Interference resistance EN 61-6- Speed control Frequency converter Dimension drawing 51 51 G Protection class Insulation class IP XD F 18 9 9 Mains connection 1~3 V, 5/6 Hz Nominal motor power P 9 W Speed n 1-37 rpm 18 113 Power consumption P 1 5-1 W Current consumption I.8 -.9 A Motor protection integrated Terminal diagram 1~ 3 V, 5/6 Hz 3~3 V, 5/6 Hz Threaded cable connection PG Mx1.5 Materials L N PE SSM SSM: L1 L3 PE SSM L L3 L1 L Collective fault signal (NC contact according to VDI 381, load capacity 1 A, 5 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Pump housing Grey cast iron (EN-GJL-) Impeller Plastic (PPE - 3% GF) Pump shaft Stainless steel (X6Cr13) Bearing Carbon, metal impregnated Minimum suction head at suction port for avoiding cavitation at water pumping temperature Minimum suction head at 5 / 95 / 11 C.5 / 3 / 1 m Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 1 / 9
16 88 / Data sheet: Wilo-Yonos MAXO 3/,5-7 Information for order placements Make Wilo Type Yonos MAXO 3/,5-7 Art no. 16 Weight approx. m.6 kg Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 11 / 9
16 88 / Data sheet: Wilo-Yonos MAXO 3/,5-1 Pump curves v 1 3 5 Rp 1 m/s,5 1, 1,5,,5 3, 3,5 Rp 1¼ Wilo-Yonos MAXO p/kpa 5/,5-1, 3/,5-1 1 1~3 V - Rp 1, Rp 1¼ 1 8 8 Approved fluids (other fluids on request) Heating water (in accordance with VDI 35) Water-glycol mixtures ( 1:1; above % admixture, the pumping data must be checked) 6 6 Permitted field of application Temperature range at ambient temperature + C -...+11 C Maximum permissible operating pressure P max 1 bar 6 8,5 1, 1,5,,5 Q/l/s Δp-c 15 1 5 Δp-v 15, 1m 1m 6 8 1 5 1m 6 8 1, Pipe connections Threaded pipe union Rp 1¼ Thread G Overall length l 18 mm Motor/electronics Energy efficiency index (EEI).3 Electromagnetic compatibility EN 618-3 Emitted interference EN 61-6-3 Interference resistance EN 61-6- Speed control Frequency converter Dimension drawing 51 51 G Protection class Insulation class IP XD F 18 9 9 113 Mains connection 1~3 V, 5/6 Hz Nominal motor power P 1 W Speed n 1 - rpm Power consumption P 1 5-19 W Current consumption I.8-1.3 A 18 Motor protection integrated Terminal diagram 1~ 3 V, 5/6 Hz 3~3 V, 5/6 Hz Threaded cable connection PG Mx1.5 Materials Pump housing Grey cast iron (EN-GJL-) L N PE SSM SSM: L1 L3 PE SSM L L3 L1 L Collective fault signal (NC contact according to VDI 381, load capacity 1 A, 5 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Impeller Plastic (PPE - 3% GF) Pump shaft Stainless steel (X6Cr13) Bearing Carbon, metal impregnated Minimum suction head at suction port for avoiding cavitation at water pumping temperature Minimum suction head at 5 / 95 / 11 C.5 / 3 / 1 m Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 1 / 9
16 88 / Data sheet: Wilo-Yonos MAXO 3/,5-1 Information for order placements Make Wilo Type Yonos MAXO 3/,5-1 Art no. 163 Weight approx. m.6 kg Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 13 / 9
16 88 / Data sheet: Wilo-Yonos MAXO 3/,5-1 Pump curves 1 8 v 1 3 5 6 1 3 Wilo-Yonos MAXO 5/,5-1, 3/,5-1 1~3 V - Rp 1, Rp 1¼ Rp 1 m/s Rp 1¼ p/kpa 1 8 Approved fluids (other fluids on request) Heating water (in accordance with VDI 35) Water-glycol mixtures ( 1:1; above % admixture, the pumping data must be checked) 6 6 Permitted field of application Temperature range at ambient temperature + C -...+11 C Maximum permissible operating pressure P max 1 bar Δp-c 3 6 8 1 1 Δp-v 3,5 1, 1,5,,5 3, Q/l/s, 1m 11m 1m 6 8 1 1 11m 1m 6 8 1 Pipe connections Threaded pipe union Rp 1¼ Thread G Overall length l 18 mm Motor/electronics Energy efficiency index (EEI).3 Electromagnetic compatibility EN 618-3 Emitted interference EN 61-6-3 Interference resistance EN 61-6- Speed control Frequency converter Dimension drawing 6 6 G Protection class Insulation class IP XD F Mains connection 1~3 V, 5/6 Hz 18 9 98 135 Nominal motor power P W Speed n 1-8 rpm Power consumption P 1 1-35 W Current consumption I.15-1.33 A 7 5 Motor protection integrated Terminal diagram 1~ 3 V, 5/6 Hz 3~3 V, 5/6 Hz Threaded cable connection PG Mx1.5 Materials Pump housing Grey cast iron (EN-GJL-) L N PE SSM SSM: L1 L3 PE SSM L L3 L1 L Collective fault signal (NC contact according to VDI 381, load capacity 1 A, 5 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Impeller Plastic (PPE - 3% GF) Pump shaft Stainless steel (X6Cr13) Bearing Carbon, metal impregnated Minimum suction head at suction port for avoiding cavitation at water pumping temperature Minimum suction head at 5 / 95 / 11 C.5 / 3 / 1 m Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 1 / 9
16 88 / Data sheet: Wilo-Yonos MAXO 3/,5-1 Information for order placements Make Wilo Type Yonos MAXO 3/,5-1 Art no. 16 Weight approx. m 5. kg Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 15 / 9
16 88 / Data sheet: Wilo-Yonos MAXO /,5- Pump curves 5 v,,8 1, 1,6,, m/s Wilo-Yonos MAXO /,5-1~3 V - DN p/kpa 5 Approved fluids (other fluids on request) Heating water (in accordance with VDI 35) Water-glycol mixtures ( 1:1; above % admixture, the pumping data must be checked) 3 3 Permitted field of application Temperature range at ambient temperature + C -...+11 C 1 1 Maximum permissible operating pressure P max 6/1 bar 6 8 1,5 1, 1,5,,5 3, Q/l/s Δp-c 1 8 Δp-v 1, 6 8 1 8,, 3, 3,, 1m 1,, Pipe connections Flange Combination flange PN6/1 (PN 16 flange according to EN 19-) Nominal flange diameter DN Overall length l mm Motor/electronics Energy efficiency index (EEI).3 Electromagnetic compatibility EN 618-3 6 8 1 Dimension drawing 51 51 Emitted interference EN 61-6-3 Interference resistance EN 61-6- Speed control Frequency converter Protection class IP XD 11 9 113 Insulation class F Mains connection 1~3 V, 5/6 Hz Nominal motor power P 9 W Speed n 1-37 rpm Dimension drawing, flange Ø 15 Ø 11 Ø 1 Ø 8 DN 57 175 Power consumption P 1 7-1 W Current consumption I.9 -.9 A Motor protection integrated Threaded cable connection PG Mx1.5 Materials 65 Pump housing Grey cast iron (EN-GJL-5) x Ø1 x Ø19 65 Impeller Pump shaft Plastic (PPS - % GF) Stainless steel (X6Cr13) Bearing Carbon, metal impregnated Minimum suction head at suction port for avoiding cavitation at water pumping temperature Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 16 / 9
16 88 / Data sheet: Wilo-Yonos MAXO /,5- Terminal diagram 1~ 3 V, 5/6 Hz 3~3 V, 5/6 Hz Minimum suction head at 5 / 95 / 11 C.5 / 3 / 1 m L N PE SSM L1 L3 PE SSM Information for order placements SSM: L L3 L1 L Collective fault signal (NC contact according to VDI 381, load capacity 1 A, 5 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Make Wilo Type Yonos MAXO /,5- Art no. 165 Weight approx. m 8.6 kg Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 17 / 9
16 88 / Data sheet: Wilo-Yonos MAXO /,5-8 Pump curves v,5 1, 1,5,,5 3, DN m/s,,8 1, 1,6, DN5 Wilo-Yonos MAXO p/kpa /,5-8, 5/,5-8 1~3 V - DN / 5 8 8 6 6 Approved fluids (other fluids on request) Heating water (in accordance with VDI 35) Water-glycol mixtures ( 1:1; above % admixture, the pumping data must be checked) Permitted field of application Temperature range at ambient temperature + C -...+11 C Maximum permissible operating pressure P max 6/1 bar 6 8 1 1 1 Pipe connections 1 3 Q/l/s Δp-c 3 1 Δp-v 3 1m, 6 8 1 1 1 6 8 1 1 1 1 Flange Combination flange PN6/1 (PN 16 flange according to EN 19-) Nominal flange diameter DN Overall length l mm Motor/electronics Energy efficiency index (EEI).3 Electromagnetic compatibility EN 618-3 Emitted interference EN 61-6-3 Interference resistance EN 61-6- Dimension drawing 6 6 Speed control Protection class Frequency converter IP XD 11 98 Insulation class Mains connection F 1~3 V, 5/6 Hz Nominal motor power P W 135 Speed n 1-8 rpm Dimension drawing, flange Ø 15 Ø 11 Ø 1 Ø 8 DN 8 5 Power consumption P 1 1-35 W Current consumption I.15-1.33 A Motor protection integrated Threaded cable connection PG Mx1.5 Materials 65 Pump housing Grey cast iron (EN-GJL-5) x Ø1 x Ø19 65 Impeller Pump shaft Plastic (PPS - % GF) Stainless steel (X6Cr13) Bearing Carbon, metal impregnated Minimum suction head at suction port for avoiding cavitation at water pumping temperature Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 18 / 9
16 88 / Data sheet: Wilo-Yonos MAXO /,5-8 Terminal diagram 1~ 3 V, 5/6 Hz 3~3 V, 5/6 Hz Minimum suction head at 5 / 95 / 11 C.5 / 3 / 1 m L N PE SSM L1 L3 PE SSM Information for order placements SSM: L L3 L1 L Collective fault signal (NC contact according to VDI 381, load capacity 1 A, 5 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Make Wilo Type Yonos MAXO /,5-8 Art no. 166 Weight approx. m 9. kg Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 19 / 9
16 88 / Data sheet: Wilo-Yonos MAXO /,5-1 Pump curves 1 1 8 6 v 1 3 Wilo-Yonos MAXO /,5-1 1~3 V - DN m/s p/kpa 1 1 8 6 Approved fluids (other fluids on request) Heating water (in accordance with VDI 35) Water-glycol mixtures ( 1:1; above % admixture, the pumping data must be checked) Permitted field of application Temperature range at ambient temperature + C -...+11 C 8 1 16 1 3 5 Q/l/s Δp-c 3 1 Δp-v 1 11m 1m 1m, 8 1 16 3 1 1 11m 1m 8 1 16 Dimension drawing 71 71 Maximum permissible operating pressure Pipe connections Flange P max 6/1 bar Combination flange PN6/1 (PN 16 flange according to EN 19-) Nominal flange diameter DN Overall length l 5 mm Motor/electronics Energy efficiency index (EEI).3 Electromagnetic compatibility EN 618-3 Emitted interference EN 61-6-3 Interference resistance EN 61-6- Speed control Frequency converter Protection class IP XD 5 15 19 15 Insulation class F Mains connection 1~3 V, 5/6 Hz Nominal motor power P 35 W Speed n 95-5 rpm Dimension drawing, flange Ø 15 Ø 11 Ø 1 Ø 8 DN 6 315 Power consumption P 1 15-5 W Current consumption I.17 -. A Motor protection integrated Threaded cable connection PG Mx1.5 Materials 65 Pump housing Grey cast iron (EN-GJL-5) x Ø1 x Ø19 65 Impeller Pump shaft Plastic (PPS - % GF) Stainless steel (X6Cr13) Bearing Carbon, metal impregnated Minimum suction head at suction port for avoiding cavitation at water pumping temperature Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 / 9
16 88 / Data sheet: Wilo-Yonos MAXO /,5-1 Terminal diagram 1~ 3 V, 5/6 Hz 3~3 V, 5/6 Hz Minimum suction head at 5 / 95 / 11 C.5 / 3 / 1 m L N PE SSM L1 L3 PE SSM Information for order placements SSM: L L3 L1 L Collective fault signal (NC contact according to VDI 381, load capacity 1 A, 5 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Make Wilo Type Yonos MAXO /,5-1 Art no. 167 Weight approx. m 13 kg Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 1 / 9
16 88 / Data sheet: Wilo-Yonos MAXO 5/,5-8 Pump curves v,5 1, 1,5,,5 3, DN m/s,,8 1, 1,6, DN5 Wilo-Yonos MAXO p/kpa /,5-8, 5/,5-8 1~3 V - DN / 5 8 8 6 6 Approved fluids (other fluids on request) Heating water (in accordance with VDI 35) Water-glycol mixtures ( 1:1; above % admixture, the pumping data must be checked) Permitted field of application Temperature range at ambient temperature + C -...+11 C Maximum permissible operating pressure P max 6/1 bar 6 8 1 1 1 Pipe connections 1 3 Q/l/s Δp-c 3 1 Δp-v 3 1m, 6 8 1 1 1 6 8 1 1 1 1 Flange Combination flange PN6/1 (PN 16 flange according to EN 19-) Nominal flange diameter DN 5 Overall length l mm Motor/electronics Energy efficiency index (EEI).3 Electromagnetic compatibility EN 618-3 Emitted interference EN 61-6-3 Interference resistance EN 61-6- Dimension drawing 6 6 Speed control Protection class Frequency converter IP XD 1 98 Insulation class Mains connection F 1~3 V, 5/6 Hz Nominal motor power P W 135 Speed n 1-8 rpm Dimension drawing, flange Ø 165 Ø 15 Ø 11 Ø 99 DN 5 6 53 Power consumption P 1 1-35 W Current consumption I.15-1.33 A Motor protection integrated Threaded cable connection PG Mx1.5 Materials 7 Pump housing Grey cast iron (EN-GJL-5) x Ø1 x Ø19 7 Impeller Pump shaft Plastic (PPS - % GF) Stainless steel (X6Cr13) Bearing Carbon, metal impregnated Minimum suction head at suction port for avoiding cavitation at water pumping temperature Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 / 9
16 88 / Data sheet: Wilo-Yonos MAXO 5/,5-8 Terminal diagram 1~ 3 V, 5/6 Hz 3~3 V, 5/6 Hz Minimum suction head at 5 / 95 / 11 C.5 / 3 / 1 m L N PE SSM L1 L3 PE SSM Information for order placements SSM: L L3 L1 L Collective fault signal (NC contact according to VDI 381, load capacity 1 A, 5 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Make Wilo Type Yonos MAXO 5/,5-8 Art no. 169 Weight approx. m 1.5 kg Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 3 / 9
16 88 / Data sheet: Wilo-Yonos MAXO 5/,5-9 Pump curves,5 1, 1,5 8 6 v,,5 3, Wilo-Yonos MAXO 5/,5-9 1~3 V - DN 5 m/s p/kpa 8 6 Approved fluids (other fluids on request) Heating water (in accordance with VDI 35) Water-glycol mixtures ( 1:1; above % admixture, the pumping data must be checked) Permitted field of application Temperature range at ambient temperature + C -...+11 C Maximum permissible operating pressure P max 6/1 bar Δp-v 5 1 15 5 1 15 1 3 5 6 Q/l/s Δp-c 3 1 3 1, 1m Pipe connections Flange Combination flange PN6/1 (PN 16 flange according to EN 19-) Nominal flange diameter DN 5 Overall length l 8 mm Motor/electronics Energy efficiency index (EEI).3 Electromagnetic compatibility EN 618-3 5 1 15 Dimension drawing 71 71 Emitted interference EN 61-6-3 Interference resistance EN 61-6- Speed control Frequency converter Protection class IP XD 8 1 19 15 Insulation class F Mains connection 1~3 V, 5/6 Hz Nominal motor power P 35 W Speed n 95 - rpm Dimension drawing, flange Ø 165 Ø 15 Ø 11 Ø 99 DN 5 53 318 Power consumption P 1 15-3 W Current consumption I.17-1.88 A Motor protection integrated Threaded cable connection PG Mx1.5 Materials 7 Pump housing Grey cast iron (EN-GJL-5) x Ø1 x Ø19 7 Impeller Pump shaft Plastic (PPS - % GF) Stainless steel (X6Cr13) Bearing Carbon, metal impregnated Minimum suction head at suction port for avoiding cavitation at water pumping temperature Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 / 9
16 88 / Data sheet: Wilo-Yonos MAXO 5/,5-9 Terminal diagram 1~ 3 V, 5/6 Hz 3~3 V, 5/6 Hz Minimum suction head at 5 / 95 / 11 C.5 / 3 / 1 m L N PE SSM L1 L3 PE SSM Information for order placements SSM: L L3 L1 L Collective fault signal (NC contact according to VDI 381, load capacity 1 A, 5 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Make Wilo Type Yonos MAXO 5/,5-9 Art no. 165 Weight approx. m 1. kg Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 5 / 9
16 88 / Data sheet: Wilo-Yonos MAXO 5/,5-1 Pump curves 1 v 1 3 8 Wilo-Yonos MAXO 5/,5-1 1~3 V - DN 5 m/s p/kpa 1 8 Approved fluids (other fluids on request) Heating water (in accordance with VDI 35) Water-glycol mixtures ( 1:1; above % admixture, the pumping data must be checked) 6 6 Permitted field of application Temperature range at ambient temperature + C -...+11 C 5 1 15 5 6 Δp-c 6 Δp-v 6 11m 1m 1m, 5 1 15 5 11m 1m 5 1 15 5 Dimension drawing 71 71 Q/l/s Maximum permissible operating pressure Pipe connections Flange P max 6/1 bar Combination flange PN6/1 (PN 16 flange according to EN 19-) Nominal flange diameter DN 5 Overall length l 8 mm Motor/electronics Energy efficiency index (EEI).3 Electromagnetic compatibility EN 618-3 Emitted interference EN 61-6-3 Interference resistance EN 61-6- Speed control Frequency converter Protection class IP XD 8 1 19 15 Insulation class F Mains connection 1~3 V, 5/6 Hz Nominal motor power P 5 W Speed n 95 - rpm Dimension drawing, flange Ø 165 Ø 15 Ø 11 Ø 99 DN 5 53 318 Power consumption P 1 15-6 W Current consumption I.17 -.65 A Motor protection integrated Threaded cable connection PG Mx1.5 Materials 7 Pump housing Grey cast iron (EN-GJL-5) x Ø1 x Ø19 7 Impeller Pump shaft Plastic (PPS - % GF) Stainless steel (X6Cr13) Bearing Carbon, metal impregnated Minimum suction head at suction port for avoiding cavitation at water pumping temperature Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 6 / 9
16 88 / Data sheet: Wilo-Yonos MAXO 5/,5-1 Terminal diagram 1~ 3 V, 5/6 Hz 3~3 V, 5/6 Hz Minimum suction head at 5 / 95 / 11 C.5 / 3 / 1 m L N PE SSM L1 L3 PE SSM Information for order placements SSM: L L3 L1 L Collective fault signal (NC contact according to VDI 381, load capacity 1 A, 5 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Make Wilo Type Yonos MAXO 5/,5-1 Art no. 1651 Weight approx. m 1. kg Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 7 / 9
16 88 / Data sheet: Wilo-Yonos MAXO 65/,5-9 Pump curves 8 6 v,5 1, 1,5, Wilo-Yonos MAXO 65/,5-9 1~3 V - DN 65 m/s p/kpa 8 6 Approved fluids (other fluids on request) Heating water (in accordance with VDI 35) Water-glycol mixtures ( 1:1; above % admixture, the pumping data must be checked) Permitted field of application Temperature range at ambient temperature + C -...+11 C Maximum permissible operating pressure P max 6/1 bar 5 1 15 5 6 Δp-c 6 Δp-v 6 5 1 15 5, 1m 5 1 15 5 Dimension drawing 71 71 Q/l/s Pipe connections Flange Combination flange PN6/1 (PN 16 flange according to EN 19-) Nominal flange diameter DN 65 Overall length l 8 mm Motor/electronics Energy efficiency index (EEI).3 Electromagnetic compatibility EN 618-3 Emitted interference EN 61-6-3 Interference resistance EN 61-6- Speed control Frequency converter Protection class IP XD 8 1 19 15 Insulation class F Mains connection 1~3 V, 5/6 Hz Nominal motor power P 5 W Speed n 95 - rpm Dimension drawing, flange Ø 185 Ø 15 Ø 13 Ø 118 DN 65 57 37 Power consumption P 1 15-6 W Current consumption I.17 -.65 A Motor protection integrated Threaded cable connection PG Mx1.5 Materials 8 Pump housing Grey cast iron (EN-GJL-5) x Ø1 x Ø19 8 Impeller Pump shaft Plastic (PPS - % GF) Stainless steel (X6Cr13) Bearing Carbon, metal impregnated Minimum suction head at suction port for avoiding cavitation at water pumping temperature Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 8 / 9
16 88 / Data sheet: Wilo-Yonos MAXO 65/,5-9 Terminal diagram 1~ 3 V, 5/6 Hz 3~3 V, 5/6 Hz Minimum suction head at 5 / 95 / 11 C.5 / 3 / 1 m L N PE SSM L1 L3 PE SSM Information for order placements SSM: L L3 L1 L Collective fault signal (NC contact according to VDI 381, load capacity 1 A, 5 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Make Wilo Type Yonos MAXO 65/,5-9 Art no. 1653 Weight approx. m 16.1 kg Subject to change without prior notice. www.wilo.com 5 Hz EU 13-7 9 / 9