LAUBE TECHNOLOGY DRY REED RELAYS



Similar documents
40 Series - Miniature PCB/Plug-in relays A. Features

AZ420 MINIATURE GENERAL PURPOSE RELAY

HIGH REPEATABILITY SPDT, BROADBAND 12 GHZ MAGNETIC-LATCHING RF RELAY

Reed V23100-V4 Relay. AXICOM Telecom-, Signal and RF Relays. AXICOM Telecom-, Signal and RF Relays. Reed V23100-V4 Relay

HV reed relays K-551H, K-552H K-553H, K-554H, K-555H, K-556H form A contact (normally open) for PCBs

SKR - industry relay

48 SERIES Relay interface modules 10 A

pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2, /0.65/0.

38 Series - Relay interface modules A

TQ SMD RELAYS TQ SMD LOW-PROFILE SURFACE-MOUNT RELAY FEATURES SPECIFICATIONS

60 Series - General purpose relays 6-10 A. Features

The Best Relaytion. Reed Relays Rev. B EC-JM ECOC: JM10 1. Aug. 04

SPST-NO SPDT DPST-NO DPDT

49 Series - Relay interface modules A. Features

1 POLE - 16A 80A Inrush type. (b) Contact configuration A : 1 form A (SPST-NO) C : 1 form C (SPDT) (standard type "K" only)

34 Series - Slim electromechanical PCB relays 6 A. Features SERIES 34.51

4 A CAPACITY, THE VARIETY OF CONTACT ARRANGEMENTS FEATURES

G7SA. Ordering Information. Slim Plug-In Safety Relay. Slim Safety Relay for Machine Control. H Slim body only 13 x 24 x 50 mm

38 SERIES. Relay interface modules A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.

1 POLE - 16A 80A Inrush type. (a) Relay type FTR-K1 : FTR-K1-Series

1 POLE - 8A Medium Load Control

RY2 miniature industrial relays

1 pole, 16 A Screw terminal connection 35 mm rail (EN 60715) mounting. 2 pole, 8 A Screw terminal connection 35 mm rail (EN 60715) mounting

Type Sealing Poles Contacts Rated voltage Model Standard d Flux-tight 4 poles oes 3PST-NO, SPST-NC 24 VDC G7SA-3A1B 3PST-NO, 3PST-NC

38 Series - Relay interface modules A

SPST-NO SPDT DPST-NO DPDT

Signal Relays AXICOM. P2 Relay V AXICOM Telecom-, Signal and RF Relays. P2 V23079 Relay. Coil Operating Range. Coil Data

FP2 Relay. The Best Relaytion

DISCONTINUED (1998) FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES

SILENT POWER RELAY. FTR-H3 Series. 1 POLE - 78A/120A Inrush Current Type FTR-K1 SERIES FEATURES

HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT

POWER RELAY. JV Series. 1 POLE - 5A/10A Medium Load Control FTR-K1 SERIES FEATURES

Type Contact material Contact form Construction Model General purpose AgCdO SPDT Semi-sealed G2R-1

1a/1c 5A/10A small power relays

1 POLE - 16A / Inrush 120A relay. (a) Relay type FTR-K1 : FTR-K1 Series (b) Contact configuration A : 1 form A C : 1 form C

NTE923 & NTE923D Integrated Circuit Precision Voltage Regulator

DISCONTINUED (1998) MINIATURE RELAY 1 POLE 1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES. RoHS compliant

Contents. Document information

RT series Miniature Printed Circuit Board Relays, Sockets and Accessories

2 POLES - 5A LOW PROFILE TYPE

PIN CONFIGURATION FEATURES ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS. D, F, N Packages

13 SERIES. Electronic step relays A

HG SERIES REED RELAYS HGRM HGR2M HGR2MT HGSR HGSM HGJM HGJ2MT HGWR HGWM HGW2MT HG HGM

80 Series - Modular timers 16 A. Features

DISCONTINUED (2009) RA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS compliant

A SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS compliant

LOW PROFILE 2 FORM C RELAY mm inch. M.B.B.type. Initial breakdown voltage 1 A 30 V DC 30 W, 62.5 V A 30 W.

COMPACT POWER TWIN RELAY

Specifications for EM VDC 4 In/4 Out and EM VDC 4 In/4 Relay Out

Solid-State Timer H3G

Plug-in relays Mini ISO relays

Goodsky Technical Data. Contact Details

SZR-LY Series. General Purpose Power Relay WARNING WARNING. Sensing and Control

0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N

Telemecanique Zelio Relay complementary and easy to assemble

Model Number Structure

2 POLES 1 to 2 A (FOR SIGNAL SWITCHING)

Model Number Structure

IM Series. AXICOM Signal and Telecom Relays

Voltage Regulator SPAU 341 C. Product Guide

PCB Relay. LED indicator G2R-1A3-SN G2R-13-SN contact) LED indicator and diode DC G2R-1A3-SND G2R-13-SND

(e) Enclosure B : Flux proof type, RTII C : Plastic sealed type (with tape), RTIII K : Plastic sealed type, RTIII

MasterINTERFACE 39 Series - Relay interface modules

General-purpose Relay

Modular I/O System Analog and Digital Interface Modules

KSC Series Sealed Tact Switch for SMT

PCB Relays Twin Relays

POWER RELAY. FTR-K1-KS Series. 1 POLE - 16A / Inrush 120A relay FTR-K1 SERIES FEATURES

Elesta Elektrotechnik AG industry relays and accessories

AC/DC Power Modules C B. TML Series, 20 & 40 Watt. Features. 20 Watt Models

Pluggable interface relays CR-P Pcb relays

Relays. Relays. RH Series. RH Series General Purpose Midget Relays. Specifications

DATA SHEET COMPACT AND LIGHTWEIGHT, SMALL MOUNTING SIZE, HIGH BREAKDOWN VOLTAGE

3. Terminal Shape P : PCB terminals FS: Surface-mounting terminals, short FL : Surface-mounting terminals, long

D-RB relay, fast switching + high DC breaking

I-PEX MHF4 Micro Coaxial Connector

Inductive Sensors Single or Dual Loop Detectors Type LD with teach-in

Inductive Proximity Sensors

Relays High Capacity 50 Amp Mini Relays Standard Mini Relays Micro Relays Power Relays Connector Modules

STLQ ma, ultra low quiescent current linear voltage regulator. Description. Features. Application

1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES

NA Series. 2 POLES - 1 to 2 A (For Signal Switching) MINIATURE RELAY FTR-K1 SERIES

Surface Mounting Relay

SENSORS. Miniature Sensors - S3Z. Advanced line of miniature Asian style of photoelectric sensors mm background suppression

MINIATURE SURFACE MOUNT RELAY

Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series

80 Series - Modular timers 16 A. Features

INTEGRATED CIRCUITS DATA SHEET. TDA7000 FM radio circuit. Product specification File under Integrated Circuits, IC01

MasterINTERFACE 39 Series - Relay interface modules

Number of poles 1-pole 2-pole Minimum Enclosure Contact. G2R-1AZ G2R-1Z DC Fully sealed G2R-1AZ4 G2R-1Z4 G2R-1A-E G2R-1-E

BAV70... BAV70 BAV70W BAV70S BAV70U. Type Package Configuration Marking BAV70 BAV70S BAV70U BAV70W

RM17TE V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC

ADJUSTABLE VOLTAGE AND CURRENT REGULATOR

HSP GmbH Zum Handwerkerhof Wendelstein Tel / Fax: / Web: HSP@hsshsp.de NTG-3000.

Control Devices Catalogue. Control Devices. Preferred and Standard Products

High-ohmic/high-voltage resistors

DSD 70 Dual Channel Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155

Ordering Information. Latching Relay G2AK. Model Number Legend Magnetic Latching Version of G2A Ideal for Sequence Control

DISCONTINUED (2012) VB SERIES 2 POLE 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant

Preset Counter signo 721

Transcription:

LAUBE TECHNOLOGY DRY REED RELAYS CONTACT FORM CURRENT PART SERIES PAGE #'S (1A) SPST-NO 1 AMP D41A...0L 147~148 (Link) (1A) SPST-NO 1 AMP D71A.1.0 149~150 (Link) (1A) SPST-NO 1 AMP F51A.100 151~152 (Link) (1A) SPST-NO 1 AMP F61A.100 137~138 (Link) (1A) SPST-NO 1 AMP R011.S06 153~154 (Link) (1A) SPST-NO 1 AMP R029.B0. 139~140 (Link) (1A) SPST-NO 1 AMP R055.B08 159~160 (Link) (1B) SPST-NC 1 AMP D31B.1.0 141~142 (Link) (1B) SPST-NC 1 AMP D41A...0L 147~148 (Link) (1B) SPST-NC 1 AMP R054.B0. 157~158 (Link) (1C) SPDT 0.5 AMP D31C.1.0 143~144 (Link) (1C) SPDT 1 AMP R025.W00 155~156 (Link) (2-1A) 2-SPST-NO 2 AMP D32A.1.0 145~146 (Link) EXCEPTIONS (1A) 2 COILS 0.4 AMP R058.B01 161~162 (Link) 136

R/SEC/F61A.100/A/12/10/2000 REED RELAY / DRY CONTACT/ 4KVcoil/ contact insulation For printed circuit board One normally open contact In plastic cover Main characteristics Coil/contact insulation 4000V Maximum switching voltage 250 VDC (or peak) Maximum switching current 400 ma Nominal current 1 A Contact rating 12 W Contact material Rhodium REF. Marking 31 9,5 11 2,54 Ø0,6 5,08 25,4 Dimensions in mm = = 3,3 ±0,2 Wiring : top view step 2,54 mm Control data Maximum voltage (V) 10 25 50 Nominal voltage (V) 5 12 24 Operate voltage to secure the function from -40 to + 85 (V) 3,5 8,4 16,8 Release voltage (V) 0,3 0,7 1,4 Power dissipated on the coil at 20 (mw) 72 67 75 137

R/SEC/F61A.100/A/12/10/2000 Electrical data Initial contact resistance -coil resistance at 20 -variation 10 % each 25 ( 100 Hold-on voltage Insulation resistance - across contacts 250 Vac - between coil and contacts 4000 Vac - between case and contacts 4000 Vac - between case and coil 1000 Vac - across contacts 10 - between coil and contacts 10 - between case and contacts 10 - between case and coil 10 Resonance frequency of the switch 2000 Hz Operate time, bounces included 1 ms Release time 0,1 ms Electrical life time Mechanical life expectancy Physical data 50 Operating temperature - 40 ~ + 8 Storage temperature - 40 ~ + 1 Weight 4,5 gr. max. Shocks (11ms) 100 g Vibrations ( 50 to 2000 Hz ) 30 g 138

R/SEC/R029.B0./A/28/09/2000 REED RELAY / DRY CONTACT For printed circuit board One normally open contact In metal cover Main characteristics Maximum switching voltage 100 VDC (or peak) Maximum switching current 400 ma Nominal current 1 A Contact rating 10 W Contact material Rhodium Marking 23 7,5 20,32 Ø0,6 2,54 6,7 3,3 ± 0,2 Dimensions in mm Wiring : top view step 2,54 mm Control data Maximum voltage (V) 8 12 18 3 Nominal voltage (V) 4 5 12 24 Operate voltage to secure the function from -40 to + 85 C (V) 2,8 3,5 8,4 16,8 Release voltage (V) 0,7 1 2 3 Power dissipated on the coil at 20 C (mw) 65 55 90 210 139

R/SEC/R029.B0./A/28/09/2000 Electrical data Initial contact resistance ( 100 ma/ 12 VAC) -coil resistance at 20 C -variation 10 % each 25 C Hold-on voltage Insulation resistance - across contacts 150 Vac - between coil and contacts 500 Vac - between case and contacts 300 Vac - between case and coil 300 Vac - across contacts 10 - between coil and contacts 10 - between case and contacts 10 - between case and coil 10 Resonance frequency of the switch Operate time, bounces included Release time 4000 Hz 1 ms 0,1 ms Electrical life time Mechanical life expectancy Physical data 50mV 10mA 5V = 200mA Operating temperature - 40 ~ + 85 Storage temperatur e - 40 ~ + 100 Weight 3,5 gr. max. Shocks (11ms) 100 g Vibrations ( 50 to 4000 Hz ) 30 g 140

D/SEC/D31B*1*0/C/29/01/2002 D31B. 1. 0 DUAL IN LINE REED RELAY / 1 normally closed contact PIN CONFIGURATION - DIMENSIONS 14 13 9 8 19,1 6,6 E 6,4 0,4 D 1 2 + 6-7 up view 3,3 2,54 0,51 0,25 7,6 5 15,24 9,5 max REFERENCES D31B. 1. 0 Nominal input Options 3 --> 5 V = 0 --> without option 5 --> 12 V = 1 --> diode ( D ) 6 --> 15 V = 2 - -> electrostatic shield ( E ) 7 --> 24 V = 4 - -> ( D + E ) Available references D31B3100 - D31B3110 - D31B3140 D31B5100 - D31B5110 D31B6110 D31B7100 For others, please contact us 141

D/SEC/D31B*1*0/C/29/01/2002 COIL CHARACTERISTICS Reference Coil Nominal MOV MRV Max input resistance input +/- 10 % ( at 20 C ) V= V= V= V= D31B31*0 500 5 3,75 0,8 6 D31B51*0 1000 12 9 1 20 D31B61*0 2150 15 11,5 4 32 D31B71*0 2150 24 18 2 29 ELECTRICAL CHARACTERISTICS Contact material rhodium Position to operate any Power switching max 10 W Carrying current 1 A Maximum switching current 500 ma Maximum switching voltage 100 V peak Switching frequency max 200 HZ Insultation resistance 10 10 Dielectric strength coil/contacts 1400 VDC Dielectric strength contact/contact 200 VDC Operate time typical ( bounces included ) 1 ms release time typical ( without diode ) 50 µs Contact resistance 150 m max Life expectancy typical 10 W --> 10 6 op 50 V - 100mA --> 1.10 7 op mechanical life expectancy --> 1. 10 9 op GENERAL SPECIFICATIONS Storage t range - 40 C ~ + 105 C Working t range - 40 C ~ + 70 C Vibrations ( 30 ~4000 Hz ) 30 g Shocks ( 11 ms ) 100 g Thermal resistance 85 C/W 142

D/SEC/D31C*1*0/C/29/01/2002 D31C. 1. 0 DUAL IN LINE REED RELAY / 1 contact changeover PIN CONFIGURATION - DIMENSIONS 14 13 E 9 8 19,1 6,6 6,4 0,4 D 1 2 + 6-7 up view 3,3 2,54 0,51 0,25 7,6 5 15,24 9,5 max REFERENCES D31C. 1. 0 Nominal input Options 2 --> 5 V = 0 --> without option 5 --> 12 V = 1 --> diode ( D ) 6 --> 15 V = 2 - -> electrostatic shield ( E ) 7 --> 24 V = 4 - -> ( D + E ) Available references D31C2100 - D31C2140 D31C5100 - D31C5110 - D31C5140 D31C7100 - D31C7110 - D31C7120 For others, please contact us D31C6110 143

D/SEC/D31C*1*0/C/29/01/2002 COIL CHARACTERISTICS Reference Coil Nominal MOV MRV Max input re sistance input +/- 10 % ( at 20 C ) V= V= V= V= D31C21*0 200 5 3,75 0,8 11 D31C51*0 500 12 9 1 20 D31C61*0 850 15 11,5 4 22 D31C71*0 2150 24 18 2 32 ELECTRICAL CHARACTERISTICS Contact material rhodium Position to operate any Power switching max 3VA Carrying current 500 ma Maximum switching current 250 ma Maximum switching voltage 30 VDC Switching frequency max 150 HZ Insultation resistance 10 10 Dielectric strength coil/contacts 1400 VDC Dielectric strength contact/contact 150 VDC Operate time typical: 1,5 ms release time typical 2 ms Initial contact resistance 150 m max Life expectancy typical 5 V - 5 ma --> 50. 10 6 op 24 V - 120 ma --> 2. 10 6 op mechanical life expectancy --> 1. 10 9 op GENERAL SPECIFICATIONS Storage t range - 40 C ~ + 105 C Working t range - 40 C ~ + 70 C Vibrations ( 30 ~4000 Hz ) 30 g Shocks ( 11 ms ) 20 g Thermal resistance 85 C/W 144

D/SEC/D32A*1*0/C/29/01/2002 D32A. 1. 0 DUAL IN LINE REED RELAY / 2 normally open contacts PIN CONFIGURATION - DIMENSIONS 14 13 9 8 19,1 6,6 6,4 0,4 D 1 2 + 6-7 up view 3,3 2,54 0,51 0,25 7,6 5 15,24 9,5 max REFERENCES D32A. 1. 0 Nominal input Options 2 --> 5 V = 0 --> sans / without option 5 --> 12 V = 1 --> diode ( D ) 7 --> 24 V = Available references D32A2100 - D32A2110 D32A5100 - D32A5110 D32A7110 For others, please contact us 145

D/SEC/D32A*1*0/C/29/01/2002 COIL CHARACTERISTICS Reference Coil Nominal MOV MRV Max input resistance input +/- 10 % ( at 20 C ) V= V= V= V= D32A21*0 125 5 3,7 0,8 8 D32A51*0 500 12 9 1 20 D32A71*0 2150 24 18 2 32 ELECTRICAL CHARACTERISTICS Contact material rhodium Position to operate any Power switching max 10 W Carrying current 1 A Max switching current 500 ma Maximum switching voltage 100 V peak Switching frequency max 200 Hz Insultation resistance 10 10 Dielectric strength coil/contacts 1400 VDC Dielectric strength contact/contact 200 VDC Operate time typical ( bounces included ) 1 ms release time typical ( without diode ) 50 µs Contact resistance 150 m max Life expectancy typical 10 W --> 10 6 op 50 V - 100mA --> 1.10 7 op mechanical life expectancy --> 1. 10 9 op GENERAL SPECIFICATIONS Storage t range - 40 C + 105 C Working t range - 40 C + 70 C Vibrations ( 30~4000 Hz ) 30 g Shocks ( 11 ms ) 100 g Thermal resistance 85 C/W 146

D/SEC/D41A***0L/D/28/10/1999 D41A... 0L SINGLE IN LINE REED RELAY / 1 normally open contact PIN CONFIGURATION - DIMENSIONS 19,2 5,6 max 7,6 1 + 2-6 7 3,3 5,08 0,51 15,24 2,55 0,25 REFERENCES D41A... 0L Nominal input Options 3 --> 5 V = 0 --> without option 5 --> 12 V = 1 --> diode ( D ) 7 --> 24 V = 1--> standard 2--> with test "dynamic contact resistance" (see next page) 147

D/SEC/D41A***0L/D/28/10/1999 COIL CHARACTERISTICS Reference Coil Nominal MOV MRV Max input resistance input Ω +/- 10 % ( at 20 C ) V= V= V= V= D41A3**0L 500 5 3,7 1 18 D41A5**0L 1000 12 8 2 25 D41A7**0L 2150 24 16 4 37 ELECTRICAL CHARACTERISTICS Contact material rhodium Position to operate any Power switching max 10 W Carrying current 1 A Max switching current 500 ma Max switching voltage 110 VAC / 100 V= Min switching level 10 µv/ 5 10-9 A Switching fr»quency max 200 s -1 Insultation resistance 10 10 Ω Breakdown voltage coil/contacts 750 V~ Operate time typical 300 µs release time typical 50 µs Static contact resistance 150 mω max Dynamic contact resistance (*) ---> max - min 12 mω (*) test made only on D41A. 2. 0L Life expectancy typical 10 W --> 5. 10 6 op 5 W --> 1.10 7 op dry circuit --> 1. 10 8 op GENERAL SPECIFICATIONS Storage t range - 40 C ~ + 105 C Working t range - 40 C ~ + 85 C Vibrations 20 g Shocks 50 g Thermal resistance 85 C/W 148

D/SEC/D71A*1*0/B/27/12/1999 D71A. 1. 0 DUAL IN LINE REED RELAY / 1 normally open contact ( low profile ) PIN CONFIGURATION - DIMENSIONS 14 13 9-8 19,1 6,6 E D 5,5 0,4 1 2 6 + 7 up view 3,3 2,54 0,51 0,25 7,6 5 15,24 9,5 max REFERENCES D71. 1. 0 Nominal input Options 2 --> 5 V = 0 --> without option 5--> 12 V = 1 --> diode ( D ) 6 --> 15 V = 2 --> electrostatic shield ( E ) 7 --> 24 V = 4 --> ( D + E ) Available references D71A2100 - D71A2110 D71A5100 D71A6100 D71A7100 For others, please contact us 149

D/SEC/D71A*1*0/B/27/12/1999 COIL CHARACTERISTICS Reference Coil Nominal MOV MRV Max input resistance input Ω +/- 10 % ( 20 C ) V= V= V= V= D71A21*0 380 5 3,5 1 15 D71A51*0 530 12 8 2 18 D71A61*0 2000 15 11,5 3 32 D71A71*0 2000 24 16 4 32 ELECTRICAL CHARACTERISTICS Contact material rhodium Position to operate any Power switching max 10 W Carrying current 1 A Max switching current 500 ma Max switching voltage 100 V peak Switching frequency max 200 Hz Insultation resistance 10 10 Ω Breakdown voltage coil/contacts 750 V~ Operate time typical ( bounces included ) 1 ms release time typical ( without diode ) 50 µs Contact resistance 150 mω max Life expectancy typical 10 W --> 10 6 op 50 V - 100mA --> 1.10 7 op Mechanical life expectancy typical --> 1. 10 9 op GENERAL SPECIFICATIONS Storage t range - 40 C ~ + 105 C Working t range - 40 C ~ + 85 C Vibrations ( 30~4000 Hz ) 30 g Resistance to shocks ( 11 ms ) 100 g Thermal resistance 85 C/W 150

REED RELAY / DRY CONTACT For printed circuit board R/SEC/F51A.100/A/11/10/2000 One normally open contact In metal cover Main characteristics Maximum switching voltage 250 VDC (or peak) Maximum switching current 400 ma Nominal current 1 A Contact rating 2 W Contact material Rhodium REF. Marking 30 9,5 10 Ø0,6 2,54 25,4 2,54 3,3 ±0,2 Wiring : top view step 2,54 mm Dimensions in mm Control data Maximum voltage (V) 10 25 50 Nominal voltage (V) 5 1 Operate voltage to secure the function from -40 to + 85 C (V) Release voltage (V) 0,4 1 2 Power dissipated on the coil at 20 C (mw) 151

R/SEC/F51A.100/A/10/10/2000 Electrical data Initial contact resistance -coil resistance at 20 -variation 10 Hold-on voltage Insulation resistance - across contacts 250 Vac - between coil and contacts 500 Vac - between case and contacts 500 Vac - between case and coil 500 Vac - across contacts 10 - between coil and contacts 10 - between case and contacts 10 - between case and coil 10 Resonance frequency of the switch Operate time, bounces included Release time Electrical life time Mechanical life expectancy 2000 Hz 1 ms 0,1 ms 50 Physical data Operating temperature - 40 ~ + 85 Storage temperature - 40 ~ + 100 Weight 4 gr. max. Shocks (11ms) 100 g Vibrations ( 50 to 2000 Hz ) 30 g 152

R/SEC/R011.S06/A/4/10/2000 REED RELAY / DRY CONTACT For printed circuit board One normally open contact In metal cover Main characteristics Maximum switching voltage 250 VAC (or peak) Maximum switching voltage Nominal current 5A Contact rating 100 W Contact material Rhodium REF. Marking 65 15,5 16 50,8 Ø1 5,08 6 Dimensions in mm Wiring : top view step 5,08 mm Control data Maximum voltage (V) 9 1 Nominal voltage (V) 6 1 Operate voltage to secure the function from -40 to + 85 C (V) 4,4 8,8 17,6 Release voltage (V) 1,2 2,4 4,8 Power dissipated on the coil at 20 C (mw) 150 150 150 153

R/SEC/R011.S06/A/4/10/2000 Electrical data Initial contact resistance -coil resistance at 20 C -variation 10 % each 25 Hold-on voltage Insulation resistance - across contact 500 Vac - between coil and contacts 500 Vac - between case and contacts 500 Vac - between case and coil 500 Vac - across contacts 10 - between coil and contacts 10 - between case and contacts 10 - between case and coil 10 Resonance frequency of the switch Operate time, bounces included Release time 800 Hz 2,5 ms 0,1 ms Electrical life time 250V 140mA Mechanical life expectancy Physical data Operating temperature - 40 ~ + 85 Storage temperature - 40 ~ + 100 Weight 30 gr. max. Shocks (11ms) 100 g Vibrations ( 10 to 500 Hz ) 20 g 154

R/SEC/R025.W00/A/3/10/2000 REED RELAY / CHANGE OVER DRY CONTACT For printed circuit board One change over contact In metal cover Main characteristics Maximum switching voltage 100 VDC (or peak) Maximum switching current 250 ma Nominal current 1 A Contact rating 3 W Contact material Rhodium REF. Marking 23 7,5 Ø0,6 20,32 2,54 Dimensions in mm 6,7 3,3 ± 0,2 wiring : top view step 2,54 mm Control data Maximum voltage (V) 8 11 8 3 Nominal voltage (V) 4 6 12 24 Operate voltage to secure the function from -40 to + 85 C (V) 2,8 4,4 8,8 17,6 Release voltage (V) 0,7 1 2 3 Power dissipated on the coil at 20 C (mw) 210 240 290 320 155

R/SEC/R025.W00/A/3/10/2000 Electrical data Initial contact resistance ( 100 ma/ 12 VAC) -coil resistance at 20 -variation 10 % each 25 Hold-on voltage Insulation resistance - across contacts 150 Vac - between coil and contacts 500 Vac - between case and contacts 500 Vac - between case and coil 500 Vac - across contacts 10 - between coil and contacts 10 - between case and contacts 10 - between case and coil 10 Resonance frequency of the switch 4000 Hz Max switching time Test process---> Coil voltage: nominal voltage Max. operate time normally open 1,5 ms Max. release time normally closed 2 ms Electrical life time 24V = 120mA Mechanical life expectancy Physical data Operating temperature Storage temperature Weight Shocks (11ms) Vibrations ( 50 to 2000 Hz ) - 40 + 85-40 + 100 3,5 gr. max. 20 g 30 g 156

REED RELAY / DRY CONTACT For printed circuit board R/SEC/R054.B0./A/3/10/2000 One normally closed contact In metal cover Main characteristics Maximum switching voltage 100 VDC (or peak) Maximum switching current 400 ma Nominal current 1 A Contact rating 10 W Contact material Rhodium REF. Marking 20,2 10,1 7,2 2,54 15,24 0,45 x 0,30 Ø 0,6 inscriptible 7,62 3,3 ± 0,2 1 + - Dimensions in mm Wiring : top view step 2,54 mm Control data Maximum voltage (V) Nominal voltage (V) Operate voltage to secure the function from -40 to + 85 C (V) Release voltage (V) Power dissipated on the coil at 20 C (mw) 157

R/SEC/R054.B0./A/3/10/2000 Electrical data Initial contact resistance ( 100 ma/ 12 VAC) -coil resistance at 20 -variation 10 % each 25 Hold-on voltage Insulation resistance - across contacts 150 Vac - between coil and contacts 500 Vac - between case and contacts 500 Vac - between case and coil 500 Vac - across contacts 10 - between coil and contacts 10 - between case and contacts 10 - between case and coil 10 Resonance frequency of the switch 4000 Hz Operate time, bounces included 1 ms Release time 0,1 ms Electrical life time Mechanical life expectancy 50mV 10mA 5V = 200mA Physical data Operating temperature Storage temperature Weight Shocks (11ms) Vibrations ( 50 to 4000 Hz ) - 40 ~ + 85-40 ~ + 100 4,5 gr. max. 100 g 30 g 158

R/SEC/R055.B08/A/2/10/2000 REED RELAY / DRY CONTACT For printed circuit board One normally open contact In metal cover Main characteristics Maximum switching voltage 100 VDC (or peak) Maximum switching current 400 ma Nominal current 1 A Contact rating 10 W Contact material Rhodium REF. Marking 20,2 10,1 7,2 2,54 0,45 x 0,30 1 Ø 0,6 inscriptible 15,24 7,62 3,3 ± 0,2 Dimensions in mm Wiring : top view step 2,54 mm Control data Maximum voltage (V) Nominal voltage (V) Operate voltage to secure the function from -40 to + 85 C (V) Release voltage (V) Power dissipated on the coil at 20 C (mw) 159

R/SEC/R055.B08/A/2/10/2000 Electrical data Initial contact resistance ( 100 ma/ 12 VAC) -coil resistance at 20 -variation 10 % each 25 Hold-on voltage Insulation resistance - across contacts 150 Vac - between coil and contacts 500 Vac - between case and contacts 500 Vac - between case and coil 500 Vac - across contact 10 - between coil and contacts 10 - between case and contacts 10 - between case and coil 10 Resonance frequency of the switch Operate time, bounces included Release time 4000 Hz 1 ms 0,1 ms Electrical life time Mechanical life expectancy 50mV 10mA 5V = 200mA Physical data Operating temperature Storage temperature Weight Shocks (11ms) Vibrations ( 50 to 4000 Hz ) - 40 + 85-40 + 100 4 gr. max. 100 g 30 g 160

R/SEC/R058.B01/A/3/10/2000 REED RELAY / DRY REED BISTABLE CONTACT For printed circuit board One normally open bistable contact (1L) In metal cover Main characteristics Maximum switching voltage or peak Maximum switching current 200 ma Nominal current 400 ma Contact rating 5VA Contact material Rhodium REF. Marking N RCE 20,2 10,1 - + O 7,2 2,54 0,45 x 0,30 1 + F - Ø 0,6 inscriptible 15,24 7,62 3,3 ± 0,2 Dimensions in mm Wiring : top view step 2,54 mm Control data Maximum voltage (V) 8 16 Nominal voltage (V) 5 12 Voltage ensuring change of state (opening or closing) see polarities as shown above Power dissipated on the coil at 20 C (mw) 50 50 Minimal impulse (ms) 5 5 161

R/SEC/R058.B01/A/3/10/2000 Electrical data Initial contact resistance ( 100 ma/ 12 VAC) -coil resistance at -variation 10 % each 25 Hold-on voltage Insulation resistance - across contacts 150 Vac - between coil and contacts 500 Vac - between case and contacts 500 Vac - between case and coils 500 Vac - between coils 100 Vdc - across contacts 1010 - between coil and contacts 10 - between case and contacts 10 - between case and coil 10 - between coils 10 Resonance frequency of the switch 4000 Operate time, bounces included 1 Release time 0,1 ms Electrical life time 50mV 10mA Mechanical life expectancy Physical data Operating temperature - 40 ~ +85 Storage temperature - 40 ~ +85 Weight 4 gr. max. Shocks (11ms) 20 g Vibrations ( 50 to 4000 Hz ) 10 g >1. 162