ZARGES DATA NEW! With new lid variants Can be personalized with your logo www.zarges.com w Data Disposal A matter of trust. With security and quality from ZARGES.
ZARGES data disposal containers have been redesigned in many technical details and devised to be even more user-friendly. Professional data disposal companies as well as small and large businesses have trusted the protection of ZARGES DATA security containers for years the new quality will astound you: Especially sturdy due to large edge and base profiles. Unique stability because profile-section joints are continuously welded in the cross section. The profile sections have a fully integrated and permanent engineered band to all mating wall and base sections. End and side wall reinforcement is achieved with circumferential and corner beading (70-l container only with corner beading). All riveted joints are made with high-quality solid rivets. Lid has substantial surrounding lid frame with integrated wall bumpers (piping buffer profile) and slotted lid plate. Lid with deposit slot (ca. 420 mm 24 mm), locking plate and spring-loaded flap. Logo holder for your unique marking. Container available with various locking system options. Optimum mobility with a choice of wheel options.
ZARGES DATA The new security containers for your file disposal in compliance with the data-protection provisions of the German Federal Data Protection Act.
ZARGES DATA Clever concepts for your data security. 655 l 500 l 350 l 415 l Container Size 240 l Container Sizes 70 l / 350 l / 415 l / 500 l / 655 l Slot and Spring-Loaded Flap Lock Snap Fastener Combination Lock Latch Lock Logo Holder 1 Logo Holder 2 Customised Embossing Lid in Colour Piping 240 l 70 l Select the ZARGES DATA security container suitable for your application. There are many standard variants and combination possibilities. We are able to design your customised product, where quantities permit. More information is available at our Internet site: www.zarges.com Combination not possible Combination available Slot & Spring- Loaded Flap Lock Snap Fastener Combination Lock Latch Lock Logo Holder 1 Logo Holder 2 Customised Embossing Colour Lid Piping Slot and Spring-Loaded Flap Lock Snap Fastener Combination Lock Latch Lock Logo Holder 1 Logo Holder 2 Customised Embossing Colour Lid Piping Specific feature details: 240-l-container: Lids with slots can be customised with embossing or inscribing. Lock for folders for containers with hinged catch, Order No. 40 895. Lock for folders for containers with latch lock, Order No. 40 884. 70-l-container: Only available with corner beading. Lock for folder, Order No. 40 895
Stable and ergonomic handle Hard aluminum tubes are welded to the corner brackets and connected to the container with 8 solid rivets so you always have full control. Lid can be opened wide for practical unloading 350-l- / 500-l-Container: Lid can be opened to 270 Strap available upon request. 70-l- / 415-l- /655-l-Container: Opening angle 110, Standard strap. 240-l-Container: Opening angle 110 due to special hinge. Spring-loaded flap with or without locking bar Lids are standard equipped with deposit slip and spring-loaded flap. Locking bars for securing the flap is an available option. Castors for optimum mobility The use of high-quality castors in the ZARGES DATA security containers ensures optimum mobility, even when fully loaded. Con tainer Size, l Castor Dia- meter er in mm Ste ering Castor tors Ste eri ng/ Fix ed Castor tors End Ca stors Fixed, no other possible options 70 50 4 240 200 2 Recommendation 350 100 4 415 125 4 2/2 500 160 4 2/2 655 125 4 2/2 Fixed Castors Steering castors screwed to the stable frame Wheel axle mounting: Steel tube is welded into the corner bracket and connected to the container with 8 solid rivets. End wheels Axle
Perfectly coordinated details will convince you:
Customised inscription of your ZARGES DATA security containers The redesigned logo holder on the lid makes customised identification possible. Identify your ZARGES DATA security container with your company logo, department designation or anything else. Print, cut and insert desired label. We recommend you order an empty sheet of waterproof labels for your printer at the same time. Your ZARGES DATA security container pre-labeled with your company logo can also be supplied by us. The sturdy plexiglass sheet protects your label from scratches. Standard delivery of logo holders includes the ZARGES DATA logo. When using the latch lock, the logo holder 2 can be attached optionally in the groove. Lock variants for more data security Snap Fastener secured with lead seal or padlock. Snap Fastener with plug lock secure with lead seal or padlock. The practical Combination Lock. Enter your personal code - security without keys. Latch Lock in groove for maximum security. Individual locking system with authorized card. The lock body is manufactured from stable cast aluminum. Circumferential protective lid piping in various colours Select from the five standard piping colours below. For large order quantities, you can determine your own colour please ask for more information. black gray yellow dark blue red Riveted joints and beading for stability All riveted joints in the ZARGES DATA security containers are designed with high-quality solid rivets. Circumferential and corner beading provides additional end and side wall stiffening reinforcement (70-l container only with corner beading).
ZARGES DATA is a brand and development of ZARGES GmbH. The basis for the design of our products is the Act for Technical Work Equipment and Consumer Products (Equipment and Product Safety Act GPSG). ZARGES works in accordance with valid labor laws and accident prevention regulations. Our company is certified according to ISO 9001. Environmental protection regulations are made following ISO 14 000. Our customer consultants are always available for your questions regarding products, customised products, etc. at any time. Would you like to know more about ZARGES DATA? www.zarges.com ZARGES GmbH Postfach 1630 D-82360 Weilheim Tel.: +49-(0)881-687-130 Fax: +49-(0)881-687-440 industrial.systems@zarges.de www.zarges.com Ident.-Nr. 180E, ee-zar10136 Subject to technical modifications. Measurements and weights are approximate values. This document may not be reproduced, in whole or in part, without obtaining prior permission from ZARGES GmbH.