TRANSPORT AND STORAGE BINS STACKABLE NESTABLE COLLAPSIBLE

Transcription

1 TRANSPORT AND STORAGE STACKABLE NESTABLE COLLAPSIBLE L7

2 RAKO HANDLES RAKO is Europe s most comprehensive system of transport bins. All bins are stackable and will carry up to hundreds of kilograms. Various floor/handle/sidewall options can be combined to create the perfect bin for any application. In addition, the RAKO system comes with a wealth of accessories check out the next few pages. Many sizes are available in the colours shown above. See colour boxes next to the various sizes. 200 x 150 x 117 mm 2 lt. (162 x 112 x 114 mm interior size) weight 215 gr 300 x 200 x 120 mm 5 lt. (260 x 160 x 116 mm interior size) weight 400 gr contoured edge art.no.: contoured edge art.no.: contoured edge 300 x 200 x 220 mm 9 lt. (260 x 160 x 217 mm interior size) weight 660 gr 400 x 300 x 65 mm 6 lt. (358 x 258 x 62 mm interior size) weight 750 gr open grip art.no.: contoured edge art.no.: solid handle solid handle 400 x 300 x 120 mm 10 lt. (358 x 258 x 114 mm interior size) weight 840 gr 400 x 300 x 170 mm 15 lt. (358 x 258 x 165 mm interior size) weight 1000 gr solid handle 800 x 600 art.no.: solid handle art.no.: R recycled mat. art.no.: solid handle L8

3 400 x 300 x 220 mm 20 lt. (358 x 258 x 217 mm interior size) weight 1700 gr 400 x 300 x 270 mm 25 lt. (353 x 253 x 268 mm interior size) weight 1545 gr RAKO SIDE WALLS FLOORS art.no.: solid handle art.no.: R recycled material art.no.: solid handle 400 x 300 x 325 mm 30 lt. (358 x 258 x 320 mm interior size) weight 2060 gr 600 x 400 x 75 mm 14 lt. (555 x 355 x 70 mm interior size) weight 1260 gr the different sidewalls Many RAKO bins are available with grooved or mesh side walls, in combination with the floors shown below. art.no.: solid handle art.no.: R recycled material art.no.: solid handle 600 x 400 x 120 mm 20 lt. (555 x 355 x 113 mm. interior size) weight 1700gr 600 x 400 x 170 mm 30 lt. (558 x 358 x 165 mm interior size) weight 2050 gr standard smooth floor art.no.: solid handle art.no.: R recycled material art.no.: solid handle grooved floor 600 x 400 x 220 mm 40 lt. (557 x 357 x 215 mm. interior size) weight 2300 gr 600 x 400 x 278 mm 53 lt. (558 x 378 x 275 mm interior size) weight 2460 gr mesh floor art.no.: 3-201G-0 solid handle art.no.: 3-301G-0 open grip art.no.: 3-201G-0 R recycled material art.no.: 3-301G-0 R recycled material art.no.: solid handle art.no.: open grip cut-away view of reinforced floor Will carry 50 kilograms without distorting! L9

4 RAKO 600 x 400 x 325 mm 60 lt. (555 x 355 x 322 mm interior size) weight 3100 gr 600 x 400 x 425 mm 90 lt. (555 x 355 x 422 mm interior size) weight 4200 gr TROLLEYS embossing Your name or logo on your bins? This can be done using a brass template or typeset standard letters, 14 or 28 mm high. T-bar handle art.no.: 3-202G-0 solid handle art.no.: 3-302G-0 open grip art.no.: 3-202G-0 R recycled mat. art.no.: 3-302G-0 R recycled mat. 800 x 600 x 120 mm 45 lt. (748 x 548 x 115 mm interior size) weight 3000 gr art.no.: 3-209G-0 solid handle art.no.: 3-309G-0 open grip 800 x 600 x 220 mm 90 lt. (748 x 548 x 215 mm interior size) weight 4400 gr art.no.: DB Both sizes of heavy-duty trolleys can be fitted with an easy to assemble and disassemble T-bar handle. This makes the trolley easier to handle on uneven floors and prevents stooping. art.no.: solid handle 800 x 600 x 325 mm 134 lt. (748 x 548 x 320 mm interior size) weight 5500 gr art.no.: solid handle 800 x 600 x 425 mm 175 lt. (748 x 548 x 420 mm interior size) weight 7200 gr heavy-duty trolleys are easy to stack art.no.: solid handle art.no.: solid handle ABS trolleys, for loads up to 200 kilograms heavy-duty polypropylene trolleys, for loads up to 500 kilograms art.no.: size 400 x 300 mm art.no.: size 600 x 400 mm (dicht) art.no.: size 600 x 400 mm (open) art.no.: size 800 x 600 mm art.no.: size 1200 x 800 mm L10

5 RAKO LIDS Special formats can be supplied from stock: drip-resistant, splash-resistant and anti-theft. hinged lids loose lids snap closure article no.: 3-862; will keep all lids pictured on the left with hinges or clips closed art.no.: x 400 mm art.no.: x 300 mm art.no.: x 200 mm art.no.: x 150 mm lids with clips art.no.: x 400 mm art.no.: x 300 mm art.no.: x 200 mm art.no.: x 150 mm loose lids for 800 x 600 mm bins seals We keep a full range of seals in stock. We can provide nearly every bin in this brochure with an optical anti-theft device. If you would like the seals to be personalised with your own logo, number or colour(s), please contact us with your request. art.no.: x 400 mm art.no.: x 300 mm art.no.: x 200 mm art.no.: x 150 mm art.no.: for heights of 120 mm art.no.: for other heights stainless steel universal hinge To fix 800 x 600 mm lids, anti-theft lids and lids with a rubber closure. Worried about legal ramifications, all our colleagues say: Don t stand on it! However, when it comes to our anti-theft lids, this doesn t worry us at all. stainless steel closure Available in a number of types and sizes, depending on the size and type of the lid. All can be equipped with padlocks, with a key system as per your requirements (all the same, differing per bin, where required with a master key). L11

6 RAKO BIN INSERTS ACCESSORIES Bin inserts for RAKO bins and cases with a floor size of 400 x 300 mm Often used in service vehicles (see page L14). Click-on lids and/or foam sheets in the lids keep the contents in place. bin size art.no. sizes click-on lid 1/ x 86 x 50 mm art.no /4 low x 128 x 32 mm art.no /4 high x 128 x 50 mm art.no / x 119 x 97 mm art.no self-adhesive foam sheet in lid of bin/case art.no. S 4315 Bin inserts for RAKO bins and cases with a floor size of 600 x 400 mm Fully stackable, including bigger bins on top of smaller bins. When used in cases a foam sheet in the lid. bin size art.no. sizes closure 1/ x 89 x 99 mm 1/ x 139 x 99 mm by 1/ x 177 x 99 mm self-adhesive 1/4 high x 177 x 230 mm foam sheet 1/4 long x 86 x 99 mm in lid 1/ x 277 x 99 mm art.no. S /2 long x 177 x 99 mm self-adhesive label holders Manufactured from environmentally friendly crystal clear PET with a 3M fixing tape adhesive layer for lifelong adhesion. art.no. label size ETI x 20 mm ETI x 20 mm ETI x75mm (A7 landsc.) ETI A6 150 x 110mm (A6 landsc.) ETI x 150 mm (A6 portrait) ETI x 155mm (A5 landsc.) ETI x 120 mm ETI x 180 mm spring label holders We have a selection of tightly fitting, wide spring label holders (art. no ), lightly fitting narrow label holders, rivetted label holders and label frames in numerous sizes. foam block inserts with 20 x 20 mm perforations By tearing out individual blocks you can arrange your interior to fit. The height of RAKO bins is 20 mm plus a multiple of 50 mm (120, 170, 220 mm). The 20 mm is filled with a starter set, consisting of a sheet in the floor and one in the lid. Between the two you will find the blocks. art.no. S 43-1 S 43-2 S 64-1 S 64-2 description starter set for floor size 400 x 300 mm foam block 50 mm thick for floor size 400 x 300 mm starter set for floor size 600 x 400 mm foam block 50 mm thick for floor size 600 x 400 mm vacuum-moulded interiors We specialise in custom-made product carriers, fitting exactly into our transport bins. standard inserts, with self-adhesive foam sheet for use in bins/cases sized 400 x 300 x 65 mm 10 bars art.no bars art.no bars art.no L12

7 RAKO COMPARTMENTS SPECIALS partitions in unbreakable polyethylene For orders of 10 or more we will custom-make your compartments. This provides the neatest product and the most flexibility. compartments in one piece For floor size 600 x 400. Available in a number of sizes, particularly suited to catering applications. standard dividers For smaller series of compartments we stock standard partition strips, tailored to the sizes of our bins. art.no. to fit height spacing M mm width floor size 400 x 300 mm M mm M length floor size 400 x 300 mm 40 mm M width floor size 600 x 400 mm 100 mm M mm length floor size 600 x 400 mm M mm 20 mm RAKO bin with drawers Our RAKO bins can be equipped with push drawers in various heights, with or without compartments. Also lockable and dripresistant versions available. ESD-approved RAKO bin with PCB rack We stock RAKO bins and lids in a non-static version, suitable for use in areas where there is a risk of explosion or for use with fragile electronic equipment. Matching PCB racks and other accessories are available. multiple-use polyethylene netting protects against scratches and jolts. The perfect compromise between loose loading and using partitions or product carriers. Less expensive and more flexible. We also supply tubular netting for protection of (gas) bottles. soft polyethylene protective netting art.no. floor size bin description DN x 300 mm LDPE, mesh size 4x4, thread ø 1,8 mm DN x 300 mm LDPE, mesh size 3x3, thread ø 2,2 mm DN x 400 mm LDPE, mesh size 4x4, thread ø 1,8 mm DN x 400 mm LDPE, mesh size 3x3, thread ø 2,2 mm Isothermic RAKO bins Do you want to keep the contents of your transport bins warm or cold? Our RAKO range can be equipped with insulated interior bins and cooling elements. L13

8 RAKO CASES Strong and eminently stackable. Available with compartments, bin inserts, foam or vacuum-moulded interior, depending on requirement. Ability to seal is standard, optional reinforced lid, can be closed by means of a padlock, diamond key lock or cylinder lock. RAKO cases, packed with spares, in a service vehicle. Perfectly organised and easy to empty at the weekend! a foam sheet inside the lid keeps the contents of the bin inserts in place RAKO cases with the handle at the top art.no. exterior size interior size volume x 200 x x 156 x litres x 300 x x 256 x 62 5 litres x 300 x x 256 x litres x 300 x x 256 x litres x 300 x x 256 x litres x 400 x x 356 x litres x 400 x x 356 x litres x 400 x x 356 x litres cylinder locks RAKO cases with reinforced handles at the sides art.no. exterior size interior size volume x 400 x 235 mm 555 x 355 x 215 mm 40 litres x 400 x 340 mm 555 x 355 x 322 mm 60 litres x 400 x 440 mm 555 x 355 x 422 mm 90 litres we are also able to supply all current sizes in UN-tested construction, as required for the transport of hazardous materials L14

9 ESA DISTRIBUTION distribution bins, truly durable packaging! Specifically designed as multi-use packaging for transporting products between the warehouse and the shop. Protect valuable contents and prevent packaging waste. 400 x 300 x 306 mm 25 lt. (329 x 250 x 282 mm interior size) weight 1890 gr 600 x 400 x 264 mm 48 lt. (530 x 353 x 240 mm interior size) weight 2930 gr art.no.: ALC x 400 x 306 mm 54 lt. (514 x 350 x 281 mm interior size) weight 3125 gr art.no.: ALC x 400 x 365 mm 65 lt. (508 x 346 x 340 mm interior size) weight 3380 gr in a stack of empty bins the lids hardly take up any extra space Toughly constructed, easy to seal, with integrated label holders. Manufactured entirely in plastic, so perfect for recycling and washing. Beneficial to the environment: they last an incredibly long time and each saves at least 250 kg of cardboard! (calculation based on one turn per week, for a period of 5 years, as a replacement of a simple 1-kg cardboard box). art.no.: ALC x 465 x 356 mm 75 lt. (598 x 375 x 307 mm interior size) weight 4560 gr art.no.: ALC label holder, card size 85 x 100 mm B x H art.no.: ALC 70635S the label can only be put into or removed from the holder when the lid is open. L15

10 ESA STACK & NEST saving space without effort These bins can be stacked with or without a lid, and by giving them a full turn they fit inside each other (or nest). There are two versions in our range: Standard: fairly compatible with Southern European stack & nest bins, open grips, strong no-nonsense design. High-return, HR : compatible with Scandinavian and American stack & nest models, solid handles. Note: by optimising the construction of the walls of the bin and the way of stacking, an 350 mm high HR bin has nearly the same storage capacity as a standard 400 mm high bin (70 lt.) The bins on this page can also be supplied in black recycled polypropylene (made from car bumper material, stronger than ordinary black plastic). 600 x 400 x 150 mm 25 lt. (490 x 332 x 145 mm interior size) weight 1440 gr 600 x 400 x 200 mm 35 lt. (490 x 332 x 195 mm interior size) weight 1675 gr Stock options: colours white and blue, in a solid or perforated version. art.no.: SN art.no.: SN x 400 x 300 mm 50 lt. (490 x 332 x 295 mm interior size) weight 2150 gr 600 x 400 x 400 mm 70 lt. (490 x 332 x 395 mm interior size) weight 2775 gr art.no.: SN art.no.: SN HR version: virtually straight side walls, and will still stack and nest perfectly. L16

11 type HR 600 x 400 x 270 mm 50 lt. (490 x 340 x 265 mm interior size) weight 1835 gr type HR 600 x 400 x 350 mm 66 lt. (490 x 340 x 345 mm interior size) weight 2010 gr ESA STACK & TURN All accessories from our stackable RAKO bin range, as shown on the previous pages, are equally suited to the space-saving ESA range. art.no.: GS-6427-S0.500 art.no.: GS-6436-S delig deksel scharnierend universeel stapeldeksel special: provided with barcode labels printed under real-time quality check conditions for use with the standard range art.no.: SND-64-1 fits all Euronorm bins in this brochure art.no.: SND-64-0 Smooth (where required reinforced) floors make the ESA range particularly suited for use with automated transport systems. For this reason, this range is the ideal combination of an internal mode of transport within the company and multi-use packaging for transport outside. additional option: inflexible floor for use in automated warehouses for more trolleys see page L10 L17

12 COLLAPSIBLE TRANSPORT four collapsible bins; together the same height as one fully extended bin! Manufactured from virtually unbreakable polypropylene, frost and heat-resistant. With sturdy hinges and smooth interiors. Stackable on the RAKO range. Comes with a large range of accessories, such as seals, label holders, trolleys. floor size 400 x 300 mm (356 x 257 mm interior size) height when collapsed 89 mm floor size 600 x 400 mm (556 x 357 mm interior size) height when collapsed 72 mm reversible label holder Remove from velcro and turn over, so that the return address becomes visible. Can be supplied to size. Stock: art.no. ETI-HW1510 card size 150 x 100 mm (A6) art.no. height weight mm 2000 gr mm 2100 gr mm 2300 gr lids 400 x 300 mm art.no. height weight mm 2600 gr mm 2800 gr mm 3000 gr mm 3050 gr lids 600 x 400 mm when requested, our transport bins can also be produced in transparant polypropylene art.no. description made in one piece, hinges situated along the long side (not shown) divided, hinges situated on the short sides (art. no. stands for one half) art.no. description divided, hinges situated along the long sides (art. no. stands for one half) divided, hinges situated on the short sides (art. no. stands for one half) option: lock on the inside In order to prevent unintentional opening of the side walls. Only available in the 600 x 400 x 320 mm collapsible bin. L18

13 800 x 600 x 465 mm 185 lt. (760 x 560 x 435 mm interior size) height when folded 120 mm lids 800 x 600 mm COLLAPSIBLE TRANSPORT art.no. descr. weight solid handle, 5600 gr ribbed floor V open grip, 7700 gr heavy floor art.no. description halves, hinged along two short sides loose lid, not shown For despatching or moving fragile items, such as computers, we supply collapsible bins with sheets of foam on the floor that act as a buffer and velcro straps to secure the contents. Below are some examples. upright frame 800 x 600 x 465 mm 185 lt. (760 x 560 x 435 mm interior size) height when folded 120 mm frame on RAKO bin art.no. descr. weight solid handle, 3950 gr no floor upright frames will fit on trolleys, collapsible bins and RAKO bins collapsible transport bin equipped with straps and lids art.no. exterior size KBB 600 x 400 x 320 mm KBB 800 x 600 x 465 mm multi-use despatch packaging Upright frame, here positioned on a 220 mm high RAKO bin. Used together with the lids and straps shown above, this is collapsible packaging that can take some knocks. bin with upright frame RAKO bin with interior, consisting of polyether buffer foam 35 mm thick and double-sided velcro straps, equipped with an upright frame, lid and fastening straps. In this case, the application is the dispatch of 21 monitors. art.no. exterior size XL-KBB 800 x 600 x 670 mm L19

14 EVEN MORE POSSIBILITIES Our assembly department specialises in custom work. We cut throwin openings, weld spill preventive trays, assemble product carriers. On this page you will see some of the standard applications. other sizes and formats This brochure mainly shows stock products equipped with standard accessories. But we also supply a wealth of other items: transport bins designed for high-rise warehouses, the defence industry or the automotive industry. throw-in opening in RAKO bin Every bin in our range can be equipped with an opening as required. pallet boxes welded together Are your products too long for standard bins? By means of welding bins or pallet boxes together we can realise any length requirement. different colours can also be welded together L20 bins welded on top of each other Any type of bin from our range can be welded together height-wise. For instance, the pallet boxes shown have heights of 1120 and 1315 mm. man-height pallet box equipped with a lockable roller door