Cheat Sheet Fabrication Team Technology Taskforce...on where to get your prototypes and installation manufactured
Protofab Protofab is hyperbody s CNC fabrication laboratory. Manufacturing: Lasercutting: Cutting range 850x450mm Materials up to 15mm thick Avoid materials containing chloride 2D/3D Milling: Cutting range 2600x1500x300mm Materials possible: Styrofoam (piep), Medium Density Fibreboard (MDF), plastics Foam is not possible (too soft) Metals are theoretically possible but should be avoided(!)
Dienst Electronische en Mechanische Ontwikkeling (DEMO) DEMO is the place where you can find experts on electronical and mechanical matters. They have locations all over the TU Delft Campus (DCT, BIO, RID, TN, CiTG, EWI, 3ME, LR). They can give you advice on most things within a design process and can manufacture almost anything for you. Design Design and development 3D Design, concept and detailing Advice on manufacturing Analyses Mechatronics Manufacturing CNC turning and milling (5-axis simultaneous) Conventional turning and milling Electrical discharge machining Sheet manufacturing Welding Other Hardware design Analog, digital & electronic circuits for PCB PCB layout Debugging, problem shooting Cables & Connectors Software Labview, Pascal, Fortran, C++ PC, PLC s Compact Rio microcontrollers FPGA Digital Signal Processing
Prices DEMO 40 euros/hour + materials costs However, maybe we could cut a deal for a discount through sponsoring Contact Mekelweg 4, Delft General information: tel: (0)15 2783244, mail: infodemo@tudelft.nl Or in case of specific ideas for a project: Aad Beeloo: tel: 2786797, mail: A.Beeloo@tudelft.nl Leon Roessen: tel: 2783182, mail: L.T.Roessen@tudelft.nl Bert Bakker: tel: 2781746, mail: B.O.Bakker@tudelft.nl
Protospace FabLab Utrecht Space for research, education en promotion within the fields of prototyping. Manufacturing 3D Milling Machine 1: Maximum dimensions 200x150x60mm Driver software: Modela Player 4.DXF (2D).STL (3D) Materials: wood, MDF, plastics, foam Machine 2: Maximum dimensions 1220x2440x100mm Driver software: Deskproto & EMC2/Axis.DXF (2D).STL (3D) Materials: wood, MDF, plastics, foam and soft metals (i.e. Aluminium) Laser cutting Maximum dimensions Machine 1: 300x600x10mm Machine 2: 960x600x15mm Driver software: CorelDraw (accepts almost every extension) Materials: Carton, wood, perspex, rubber (no metals) 3D color printing Machine 1: Maximum dimensions 200x250x200mm Builds 3D print with ceramic powder Driver software: ZPrint (accepts.3ds,.stl,.vrml) Machine 2: Maximum dimensions 210x210x210mm Builds 3D print with various plastics and biodegradable plastics Driver software: Cura +Printrun (accepts.stl)
Vinylcutter 2D Vinylcutting, ideal for lettering and complex shapes in foil sticker. Maximum dimensions 580x25000mm Driver software: Coreldraw and Easysign (Accepts.CDR and.eps) Vacuum Forming Can create thick plastics (max 3mm) forms with a mold Maximum dimensions 550x550x400mm Business hours Tuesdays from 13.30 till 16.30 Thursdays from 9.30 till 16.30 Machine reservations are not possible. A half-day reservation can be made for a machine though. Check their agenda here: http://protospace.nl/agenda Contact Stichting ProtoSpace Bezoekadres: Nijverheidsweg 16B, 3534 AM Utrecht Postadres: Postbus 10152, 3505 AC Utrecht E-mail: info@protospace.nl Telefoon: 030 223 08 75 We stellen het erg op prijs als je voordat je belt, eerst goed op de site hebt gezocht naar een antwoord op je vragen.
Materialise Prototyping Materialise offers a great amount of prototyping facilities, especially in 3D printing. They have offices and factories all around the world (closest one: Belgium) and ship all around the world (some techniques with shipping times of about 1 day). They offer a lot of fabrication techniques. Go to the following web page and read about each technique yourself. Most of the techniques are probably pretty expensive but you can always ask for a price quote. http://prototyping.materialise.com/all-available-materials Manufactoring: 3D Printing Stereolithography (SL) Nextday Stereolithography Online prototype ordering. Delivers your prototypes in 24 hours when the order is placed before 12 noon CET. Mammoth Stereolithography Big pieces up to 2 meters Laser sintering Fused Deposition Modelling Polyjet Polyjet offers the unique ability to print parts and assemblies made of multiple model materials, with different mechanical or physical proper. You can confidently order parts of unparalleled complexity, made of several materials and with the finish of a high-quality end product. Z Corp Vacuum casting Besides 3D printing, Materialise does also vacuum casting. Uses silicone molds build through 3D Printing (RP). Reaction Injection Moulding (RIM) A technique to produce plastics parts by low-pressure injection of thermoset resins in molds. Hand lay-up prototyping RIM but then done by hand.