Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com TRI CLAMP PRESSURE REGULATORS Stainless steel AISI 316L pressure regulators with clamp connections, suitable for compressed air, gas and liquid FEATURES Pressure regulator for inlet pressure up to 25 bar (362 psi) Clamp connections DIN 32676 welded to the body: 1/2"; 3/4"; 1 ; 1 1/2. Outlet pressure is controlled by a piston. Electropolished body. Ra 0,4 µm (16 µin) roughness on inside wetted surfaces. Available the ATEX version. Brand II2GDcIICX. For use in potentially explosive atmospheres zones: 1, 21, 2, 22 (not applicable in mines and zone 0). The product complies with the directive 97/23/CE PED.
SPECIFICATIONS 1/2" and 3/4" pressure regulator weight ~1,56 Kg (~3,4 lb) 1" and 1 1/2 pressure regulator weight ~10,2 Kg (~22,5 lb) Operating temperature: -40 C +175 C (-40 F +347 F) Suitable for steam service Main valve leakage classification: VI (bubble tight) Flow coefficient: Kv= 1,2 Nm³/h Cv = 1,4 US gal/min for 1/2 and 3/4" version Flow coefficient: Kv= 11 Nm³/h Cv = 12,8 US gal/min for 1 and 1 1/2 version Degree of protection: IP25 All metallic parts are machined from the solid bar. No threaded connections exposed to the fluid MATERIALS Body and bonnet: stainless steel AISI 316L Internal parts: stainless steel AISI 316L Main valve spring: stainless steel AISI 302 (not in contact with the fluid) Adjusting spring: C85 nickel-plated NiP/Fe 15 μm (not in contact with the fluid) Piston: stainless steel AISI 316L Gaskets: EPDM or EPDM in accordance to FDA (other compounds available on request) SPARE PARTS Complete kit: complete main valve, o-rings Copyright ID Insert Deal S.r.l. - All rights reserved 2
flow charts 7 1" TRI CLAMP REGULATOR Pout 0,8 8 bar - Pin=10 bar - Aria/Air Outlet pressure [bar] 6 5 4 3 2 1 0 0 200 400 600 800 1000 1200 1400 1600 Flow rate [Nm^3/h] 9 1/2" TRI CLAMP REGULATOR Pout 0,8 8 bar Pin=10 bar Aria/air Outlet pressure [bar] 8 7 6 5 4 3 2 1 0 0 20 40 60 80 100 120 140 160 180 Flow rate [Nm3/h] ------Limite consigliato di portata/recommended flow limit Copyright ID Insert Deal S.r.l. - All rights reserved 3
available model types Regolatori di pressione con attacchi TRI-CLAMP TRI-CLAMP Pressure regulators Regolatori di pressione con attacchi tri-clamp in acciaio inox, idonei per aria compressa e gas tecnici non corrosivi e liquidi Pressure regulators with tri-clamp connections, made of stainless steel, for compressed air and technical, non corrosive gases and liquids Parti metalliche da lavorazione di barra-no manometro / Metallic parts machined from solid bar-no gauge TYPE PS bar P.Out bar INLET CLAMP OUTLET CLAMP GAUGE CONNECTION CODE MEDIUM TRI-CLAMP PRESSURE REGULATOR TRI-CLAMP PRESSURE REGULATOR TRI-CLAMP PRESSURE REGULATOR TRI-CLAMP PRESSURE REGULATOR 25 0,2 1,5 25 0,3 3 25 0,8 8 1/2" 1/2" 3/4" 3/4" 1" 1" 1"1/2 1"1/2 1/2" 1/2" 3/4" 3/4" 1" 1" 1"1/2 1"1/2 1/2" 1/2" 3/4" 3/4" 1" 1" 1"1/2 1"1/2 No gauge connection On request No gauge connection On request No gauge connection On request 3TCR2# 3TCR2# 3TCR2# * * * * Aria - N2 - He - Ar - H2 - CO2 - N2O - Liquidi ESECUZIONI DIVERSE DA STANDARD / SPECIAL VERSIONS Pressione uscita pretarata / Pre-set outlet pressure Pressione uscita tarata fissa, vite con dado cieco / Fixed outlet pressure, screw with cap nut Convogliamento su campana / Connection for bonnet piping Stampigliatura su specifica del cliente / Not standard branding Sgrassato uso O2 / Degreased for O2 Versione Relieving / Relieving version Versione ATEX / ATEX version Temperature diverse da standard / Special temperature range O-ring secondo FDA / O-ring according to FDA Copyright ID Insert Deal S.r.l. - All rights reserved 4
generating the product code TRI CLAMP PRESSURE REGULATOR AISI 316 L AA BB CC DD EE FF AA Attacchi / Connections 9E DIN32676-1" 9F DIN32676-1 1/2" BB Pressione ingresso / Inlet pressure C1 25 bar CC Intervallo uscita - Outlet range A0 Pout 0,2 1,5bar B0 Pout 0,3 3bar D0 Pout 0,8 8bar DD Guarnizioni / Gaskets 98 EPDM 99 FPM EE Marchiato / Marked I0 ID FF Accessori / Accessories 00 Nessun accessorio 02 OR FPM,(-20+200) C 16 O-Ring FDA CODE COMPOSITION EXAMPLE 3TCR2#9E C1 D0 98 I0 00 3TCR2#: Pressure regulator clamp connection 9E: DIN 32676-1 connections C1: maximum inlet pressure 25 bar D0: outlet pressure range 0,8-8 bar 98: EPDM gaskets I0 00: No accessories Copyright ID Insert Deal S.r.l. - All rights reserved 5
technical drawings (all dimensions in mm) PRESSURE REGULATOR CLAMP CONNECTIONS 1" 1 1/2" 129 ~75 D IN OUT ~326 IN/OUT L D 1" ~180 ±3 ø50.5 1"1/2 ~182 ±3 ø50.5 L ~65 *For pipe connection when required, random orientation Copyright ID Insert Deal S.r.l. - All rights reserved 6
technical drawings (all dimensions in mm) PRESSURE REGULATOR CLAMP CONNECTIONS 1/2" 3/4" 83 ~57 M5* D IN OUT ~182 L ~42 *For pipe connection when required, random orientation IN/OUT L D 1/2" 142±3 ø25 3/4" 139,4±3 ø25 Copyright ID Insert Deal S.r.l. - All rights reserved 7
ID Insert Deal Srl Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com ID Insert Deal si riserva il diritto di cambiare le specifiche del prodotto senza preavviso. ID Insert Deal reserves the right to change and/or modify product specifications without prior notice. Insert Deal non si assume alcuna responsabilità per la scelta, uso e manutenzione di qualsiasi prodotto. La responsabilità per l idonea scelta, uso e manutenzione di qualsiasi prodotto ID rimane interamente a carico dell acquirente. Insert Deal does not assume responsibility for selection, use and maintenance of any products. Responsibility for proper selection, use and maintenance of any ID products remains entirely to the purchaser. Riproduzione vietata. Tutti i diritti riservati; nessuna parte del presente documento può essere riprodotta senza autorizzazione di ID Insert Deal Srl. Reproduction forbidden. All rights reserved; the hereby document can t be reproduced, also partially, without the authorization of ID Insert Deal Srl. 2^S-3TCR2 - REGOLATORI TRICLAMP_EN_01 Azienda con sistema di gestione qualità certificato. certificato N 50 100 9191 Company with certificated quality management system. certificate N 50 100 9191 Copyright ID Insert Deal S.r.l. - All rights reserved 8