VDE Testing and Certification Institute Merianstraße 28 D-63069 Offenbach A Certification of Plastic Materials Glow-Wire Flammability Index GWFI Glow-Wire Ignition Temperature GWIT Comparative Tracking Index CTI Temperature of the Ball Pressure Test VDE is well known as a competent and reliable partner for testing and certification of electrical product safety. VDE approved products enjoy highest recognition worldwide and, therefore, ensure your entry into the global market. Our Material Test Department is now offering the certification services for electrical insulating materials. for flammability (GWFI) and ignitability (GWIT) of materials used in household appliances according to IEC 60335 bzw. DIN EN 60335 (VDE 0700) and its components. To give evidence of consistent product quality, annual factory surveillances will be conducted from the independent VDE Testing and Certification Institute in conjunction with material testing. Use the benefits of Accelerated Time-to-Market of your customers Reduced costs for VDE Approval of household appliances and components Intensified relationship with your customers Simplified international approvals without further material tests Furthermore we are providing the certification of your plastic material on the comparative tracking index CTI as well as the resistance to heat (temperature of the ball pressure test). Take the advantage of our new service! We are looking forward to give you further details upon request. 1/7
Recognition of GWFI- and GWIT test results as an alternative to Glow-wire tests on finished products According to DIN EN 60335-1 (VDE 0700-1), sub clause 30.2.2 und 30.2.3 for plastic materials GWFIand GWIT tests are required. The VDE Institute will not carry out a glow-wire test on the finished product under the following conditions: presentation of a VDE approval on the required GWFI- und GWIT value for the relevant colours and the preferential values of the plaques Confirmation from the component- / appliances manufacturer that the material is unchanged and is processed in accordance with the processing conditions including recycling material The updated online catalogue of VDE-certified products including the certified plastic materials can be found under http://www.vde-institut.com/vde_pi_en/zertifizierungsregister (search for material testing). DIN EN 60695-2-12 (VDE 0471-2-12) Flammability of materials DIN EN 60695-2-13 (VDE 0471-2-13) Ignitability of materials Determination of the glow-wire flammability index (GWFI) on plaques of solid electrical insulating materials GWFI no ignition of the test specimen or flames or glowing extinguish within 30 s after removal of the glow-wire Determination of the glow-wire ignition temperature (GWIT) on plaques of solid electrical insulating materials GWIT no ignition of the test specimen or visible flames extinguish within 5 s no ignition of the tissue paper DIN EN 60112 (VDE 0303-11) Tracking Determination of the comparative tracking index CTI on plaques of solid electrical insulating materials DIN EN 60695-10-2 (VDE 0471 Teil 10-2) Resistance to heat Determination of the resistance to heat (temperature of the ball pressure test) on plaques of solid electrical insulating materials 2/7
Flow Chart Certification Process Order for testing and certification (for all material thicknesses and all colours) Specimen 80 mm x 80 mm Material thicknesses 0.75; 1.5; 3.0 mm Colours uncoloured, black, white, further colour (preferably blue or red) Chemical Analysis of each type of material and each colour serves as reference for the annual factory inspection Testing passed Factory inspection 1 x annually testing 1 Materialthickness 1 colour Certificate Type of material GWFI with thickness GWIT with thickness Colors CTI Temperature of ball pressure test First inspection of the factory Internet Publication VDE Online Catalog 3/7
Certificate page 1 4/7
Certificate page 2 5/7
Test Equipment for Glow-wire Tests Description of the test equipment Test equipment to determine the flammability of end-products GWT flammability of materials at test plaques GWFI ignitability of materials at test plaques GWIT DIN EN 60695-2-10 (VDE 0471-2-10) IEC 60695-2-10 DIN EN 60695-2-11 (VDE 0471-2-11) IEC 60695-2-11 DIN EN 60695-2-12 (VDE 0471-2-12) IEC 60695-2-12 DIN EN 60695-2-13 (VDE 0471-2-13) IEC 60695-2-13 Technical data of the test equipment Manufacturer: PTL Test temperature: 550 C.. 960 C Test Equipment for Tracking Tests Description of the test equipment Test equipment to determine the comparative tracking index CTI proof tracking index PTI of solid insulating materials using alternating voltages DIN EN 60112 (VDE 0303-11) IEC 60112 Technical data of the test equipment Manufacturer: Test voltage: PTL AC 100 V... AC 600 V 6/7
Test Equipment for Ball Pressure Tests Description of the test equipment Test equipment for testing the resistance to heat of electrotechnical equipment sub-assemblies and components solid electrical insulating materials DIN EN 60695-10-2 (VDE 0471-10-2) IEC 60695-10-2 Technical data of the test equipment Test temperature: 70 C.. 300 C Contacts Customer service: Test engineering: Mr. Giuseppe Messinese Tel.: +49 69-8306-786 Giuseppe.Messinese@vde.com Mr. Gebhard Kohler Tel.: +49 69-8306-345 Gebhard.Kohler@vde.com Mr. Rolf Sievers Tel.: +49 69-8306-427 Rolf.Sievers@vde.com Ms. Regina Dorf Tel.: +49 69-8306-684 Regina.Dorf@vde.com 7/7