EM Hold-open magnets

EM Hold-open magnets

DORMA EM Hold-open magnets A modular system for fire and smoke doors Setting new standards for hold-open magnets DORMA s new range of EM hold-open magnets provides the perfect complement to a technically and aesthetically advanced range of fire and smoke door products. These new market-orientated developments are characterised by their ease of fixing Plus points...... for the trade 2 Cost-effective modular system offering the advantages of maximum flexibility with minimal stocking levels. 2 A further component in the DORMA range for single-source supply.... for the installer 2 Quick and easy to fix. 2 Sophisticated accessories suitable for a wide range of applications. and functional elegance. And thanks to comprehensive quality assurance, they also offer maximum reliability and service life. Certified to ISO 9001... for the specifier/ architect 2 Uniform appearance common to all models. 2 Modular system for applica tion flexibility.... for the user 2 Unobtrusive. 2 Concealed cable run. 2 Optimum holding force with minimum power consumption. Data and features 00 G 00 U 00 A Fixing Surface-mounted 2 2 Flush-mounted 2 Floor-mounted 1) 2 2 Holding force 400 N 2 2 2 Anti-remanence pin 2 2 2 Test pushbutton 2 Polarity reversal protection 2 2 2 Operating voltage 24 V AC/DC 2 2 2 Power consumption in W 1. On-load factor in % 100 (rated for continuous service) Class of protection IP 40 2) Ambient temperature in C 0 0 Weight in kg 0.41 0.42 0.46 Dimensions Width 8 8 8 in mm Length 8 8 8 Depth 32 3 3 Hold-open devices tested to EN 11 2 2 2 -mark for building products 2 2 2 2 yes no 1) Floor angle bracket required (accessory) 2) EM 00 A in conjunction with floor angle bracket: Class of protection IP 43 Hold-open magnets 8 66 60 DORMA EM 00 G DORMA EM 00 U DORMA EM 00 A 32 3 3 Armature plates DORMA MAG DORMA MAW DORMA MAT 20 2 81 7 39 7 7 Ø 0 Ø 47 8 66 Ø 42 Ø 42 10 10 60 Ø 47 Ø 42 10 Ø 4, 60 Ø 4, 20 Buffer zone 2

Electro-magnets for hold-open systems The statutory regulations which apply in many countries allow fire and smoke doors to be held open for a limited period of time by electro-magnetic hold-open devices which, in the event of a fire, are de-energised to release the door so as to enable auto matic closing. Such systems consist of a hold-open device, fire/smoke detection and alarm system, power supply and release device, and generally have to be approved by an accredited institute or building authority (in Germany: the German Institute for Building Technology, Berlin). Electro-magnets are devices which hold open fire and smoke doors. In the event of a fire, the hold-open magnet is de-energised by the release device responding to a signal from the fire detector. The automatic closing action is provided by door closers which, in Germany, must correspond to DIN EN 114 and be third-party verified. It must also be possible to manually release the holdopen device. According to the guidelines for hold-open systems applicable to Germany, a manual release pushbutton is necessary when employing electromagnets in such applications. The pushbutton employed must be red, carry the wording Close door, be located in the immediate vicinity of the door, and must not be hidden when the door is in its hold-open position. 230 V AC ±10 % RM 230 V AC ±10% RM EM MAG RMZ EM G-SR-EMR MAG MAG EM HT HT EM = Electro-magnet HT = Manual release pushbutton MAG = Armature plate RM = Smoke detector (ceiling-mounted) RMZ = Smoke detector (lintel-mounted) G-SR-EMR = Door co-ordinator with integral smoke detector F Approval certification Electro-magnets of the series DORMA EM 00 for 24v AC/DC are tested and third-party verified by the Verband der Sachversicherer (VdS) e.v., Cologne (Association of Property Insurers), and have been approved by the German Institute for Building Techno logy (DIBt), Berlin, for use in combination with the DORMA RMZ smoke detector and other reputable smoke detector systems, (e.g. with DORMA RMZ: approval certificate No. Z-6.-1890). In Germany, inspection and approval of the holdopen system is additionally required. 3

DORMA EM Modular system overview EM 00 G EM 00 U EM 00 A 2 33 MAG 84 6 87 MAW 113 94 116 MAT Specification text EM 00 G Hold-open magnet with pole reversal protection for wall or floor mounting* Holding force 400 N 24v AC/DC Generally approved by DIBt-Berlin for use in holdopen systems. (System acceptance inspection may be necessary.) Requisite accessories: Armature plate Make: DORMA EM 00 G EM 00 U Hold-open magnet with pole reversal protection for flush fixing Holding force 400 N 24v AC/DC Generally approved by DIBt-Berlin for use in holdopen systems. (System acceptance inspection may be necessary.) Requisite accessories: Armature plate Make: DORMA EM 00 U EM 00 A Hold-open magnet with pole reversal protection and integral test pushbutton, for wall or floor mounting* Holding force 400 N 24v AC/DC Generally approved by DIBt-Berlin for use in holdopen systems. (System acceptance inspection may be necessary.) Requisite accessories: Armature plate Make: DORMA EM 00 A *) in conjunction with floor angle bracket, see Page 4

DORMA EM Accessories Floor angle bracket 84 EM 00 A EM 00 G 39 74 36 68 3 3 3 32 32 32 26 108 64 29 37 8 8 66 For installation of hold-open magnets EM 00 G and EM 00 A as floor-mounted units. A DORMA EM 00 B hold-open magnet for floor mounting comprises an EM 00 G or EM 00 A hold-open magnet and an associated floor angle bracket. Specification text: see Page 4 Adapter frame EM 00 G EM 00 A 4 61 22 The frame can be combined with the individual holdopen magnets of the series EM 00 G/U/A. Separate manual release switch 82 HT - UP HT - AP Close door 82 18 1 UP AP For releasing the hold-open device by hand. When employing electromag nets in hold-open systems for fire and smoke doors, a manual switch may have to be provided in accordance with local or national regulations (e.g. the guidelines of the German Institute for Building Technology (DIBt), Berlin, for German applications).

DORMA EM Hold-open magnets Special models EM 00 H for floor, ceiling and wall mounting, with integral test pushbutton Specification text: 24v DC hold-open magnet with pole reversal protection and integral test pushbutton for floor, ceiling and wall mounting. Holding force 490 N. Generally approved by the DIBt-Berlin for use in holdopen systems (in Germany). (System acceptance inspection may be necessary.) 17 / 32 / 47 12 / 27 / 42 92, 4, ø 0 10 / 300 / 40 ø 18 ø 4, Size: Y 10/17 mm Y 300/32 mm Y 40/47 mm Requisite accessories: Armature plate Make: DORMA EM 00 H ø 4, 70 6 EM + RMZ + 2xRM RS-AM (Optional) RM RM 18 kω 18 kω 2 x 121 kω 2 x 121 kω EM HT B 10 A 121 kω N PE L RMZ 230 V AC Recommended cabling: I - (St) Y 2 x 2 x 0.6 6

Standard equipment and accessories MAG MAW MAT MAG I Floor Adapter angle frame bracket xx 69020110 xx 69020111 xx 69020112 xx 69021113 6901140 690xx41 EM 00 G X X X 24 V AC/DC y 690xx11 y y y # # EM 00 U X X X 24 V AC/DC y 690xx21 y y y EM 00 A X X X 24 V AC/DC y 690xx31 y y y # # # EM 00 H 10/17 mm X 24 V DC y 690100 y 300/32 mm X y 6901006 y y 6901007 y X Separate manual release switch HT-UP 390131 HT-AP 390132 Note: A hold-open magnet for floor mount ing comprises an electro-magnet of the type EM 00 G or EM 00 A and the floor angle bracket. y = Hold open magnet separate X = Armature plate separate # = Accessory Colour XX white 11 stainless steel finish 12 7

www.dorma.com Door Control Division worldwide WN 00 01 364 917 132, 07/10, 07/09, EM, RTS GB, 8, x. F, DD. x. XX. xx/10 xx/09 Subject Sous réserve to change de without modifications notice techniques 4021226 31398 29067 Door Control Automatic Glass fittings and Accessories Security Time and Access (STA) Movable Walls Central Europe DORMA GmbH + Co. KG DORMA Platz 1 D-826 Ennepetal Phone +49 2333 793-0 Fax +49 2333 793-49 Australasia DORMA Door Controls Pty. Ltd. 2, Abbott Road Hallam/Victoria 3803 Australia Phone +61 3 879 0666 Fax +61 3 879 0280 China/Hong Kong DORMA Door Controls (Suzhou) Co. Ltd. No. 9, Hong Feng Road Suzhou Singapore Industrial Park Suzhou, 21021 P.R. of China Phone +86 12 67612481 Fax +86 12 6761482 DORMA Door Controls Pte. Ltd. Room 701, Technology Plaza 61 King s Road North Point Hong Kong Phone +82 2034632 Fax +82 2887370 Emerging Markets DORMA GmbH + Co. KG DORMA Platz 1 D-826 Ennepetal Phone +49 2333 793-0 Fax +49 2333 793-49 DORMA Door Controls (Pty.) Ltd. Kings Court 4A Mineral Crescent ZA-2000 Crown/Gauteng South Africa Phone +27 11 8300280 Fax +27 11 8300291 Far East DORMA Far East Pte. Ltd. No. 31 Gul Lane Singapore 62942 Phone +6 6268 7633 Fax +6 626 799 France DORMA France S.A.S. Zone Europarc Immeuble Mega 42 42, Rue Eugène Dupuis F-94046 Créteil Cedex Phone +33 1 41942400 Fax +33 1 41942401 Gulf DORMA Gulf Door Controls FZE Jebel Ali Free Zone South Plot No. S 2013 Road No. SW 301 G P.O. Box 17268 Dubai United Arab Emirates Phone +971 4 8020400 Fax +971 4 8869100 / 8869101 North America DORMA Architectural Hardware DORMA Drive, Drawer AC Reamstown, PA 1767-0411 Phone +1 800 238483 Fax +1 800 2749724 Scanbalt DORMA Danmark A/S Sindalvej 6 8 DK-2610 Rødovre Phone +4 43000 Fax +4 43001 South America DORMA Sistemas de Controles para Portas Ltda. Av. Piracema, 1400 Centro Empresarial Tambore CEP 06400-933 Barueri/ São Paulo, Brasil Phone + 11 46899280 Fax + 11 4689921 South-East Europe DORMA AUSTRIA GmbH Pebering Strass 22 A-301 Eugendorf Phone +43 622 284880 Fax +43 622 28491 South Europe DORMA Italiana S.r.l. Via. Canova /46 I-2003 Lissone (MI) Phone +39 039 2031 Fax +39 039 203310 DORMA Ibérica, S.A. Camino San Martin de la Vega, 4 E-2800 Arganda del Rey (Madrid) Phone +34 91 87780 Fax +34 91 877881 UK/Ireland DORMA UK Ltd. Wilbury Way Hitchin GB-Hertfordshire SG4 0AB Great Britain Phone + 1462 477600 Fax + 1462 477601