Technip Facilities Technip Offshore Finland Construction yard
Technip Profile Listed on Euronext Paris Revenues: 7.9 billion euros in 2007 23,000 people worldwide One of the five world leaders in engineering, technology and project management for oil and gas, petrochemical and other industries Confirmed leadership and proprietary technologies in 3 business segments: Subsea Design, manufacture and supply of deepwater flexible and rigid pipelines, umbilicals and riser systems Subsea construction and pipeline installation services Five state-of-the-art flexible pipe and umbilical manufacturing plants Five spoolbases for reeled pipeline fabrication A constantly evolving fleet strategically deployed in the world's major offshore markets Offshore Engineering and fabrication of fixed platforms for shallow waters (TPG 500, Unideck ) Engineering and fabrication of floating platforms for deep waters (Spar, semi-submersible platforms, FPSO) Leadership in floatover technology Three construction yards Onshore Gas treatment and liquefaction (LNG), Gas-To-Liquids (GTL) Oil refining (refining, hydrogen and sulphur units) Onshore pipelines Petrochemicals (ethylene, aromatics, olefins, polymers, fertilisers) Biofuel and renewable energies Non-oil activities (pyrotechnics, life sciences, metals, buildings and infrastructures) 2
Global contracting, Project management and Construction Norwegian Sea Pori North Sea Technip s construction yard in Pori, Finland Technip Offshore Finland is a project management and construction company focusing on offshore construction projects all over the world. It is located in Pori, on the Baltic Sea, Finland. Leader in systems integration, specializing in: Spar hull and mooring system deliveries drilling rig conversions offshore construction services heavy industrial products Products and Services Spar hull and mooring systems Newbuild mobile offshore units Platform modules and structures Onshore process plant modules Special offshore vessels Repairs, upgrades and rig conversions Project management Studies and engineering for newbuilds and modifications of mobile offshore units Procurement and logistic services Tailor-made offshore and onshore products Pressure vessels and heavy industrial products TECHNIP OFFSHORE FINLAND 3
Offshore construction expertise From exploration rigs... In project execution, we have proven expertise gained from over 30 years of experience covering construction of exploration and service rigs including 16 semi-submersible rigs, 5 jack-up drilling rigs and 3 drillships. Friede & Goldman L-907, Glomar Arctic III Global Marine, USA Pipe layer Israfil Guzeinov V/O Sudoimport, former Soviet Union Noble Muravlenko (Viktor Muravlenko) V/O Sudoimport, former Soviet Union Jack-up Sakhalinskaja, V/O Sudoimport, former Soviet Union 4 TECHNIP OFFSHORE FINLAND
...to production platforms We have also delivered production platform structures, modules and 10 Spar production platform hulls. Genesis project, Spar hull and mooring system, Chevron/Exxon/Fina, USA, June 1998 Gullfaks C, Gravity base production platform main mechanical outfitting, Aker Contracting/Statoil, Norway, May 1988 Perdido project, Spar hull and mooring system, Shell Exploration & Production, USA, 2008 Mad Dog Truss type Spar hull for BP Exploration, USA, 2004 TECHNIP OFFSHORE FINLAND 5
Spar evolution 6 TECHNIP OFFSHORE FINLAND
TECHNIP OFFSHORE FINLAND 7
Gateway to Russia and the Caspian Sea In addition to the Spar hull deliveries and projects for the Gulf of Mexico, South America, South East Asia and West Africa, we are supporting the Group s involvement in the Caspian Sea region and Russia. The turnkey delivery of Astra to the Caspian Sea in cooperation with local yard in Astrakhan for Khazoil (LUKoil) was completed in May 1999. The scope of work included transportation of the jack-up Astra in sections to Astrakhan for reassembly and finally for operation in the Caspian Sea. Friede & Goldman, Dada Gorgud (Kaspmorneft), V/O Sudoimport, former Soviet Union, delivered in June 1978, and upgraded in Baku during 1998 using the yard of a local alliance partner. Besides newbuilds, we have delivered several rig conversions and upgrades around the world. Our strong construction management experience, in-depth knowledge and proactive cooperation with other Technip companies and with the local industry enable us to deliver solutions for the safe and efficient exploitation of offshore oil and gas resources. We can offer Proven services with 30 years of experience in several successful offshore and onshore deliveries to the former Soviet Union Versatile engineering, procurement, construction, assembly and testing services at our facilities in Pori, Finland Excellent connections directly from the yard either by rail to the Russian network or by ships or barges in the Russian/Caspian channel system Modern infrastructure including a wide scope of industrial subcontractors and services Turnkey deliveries for the Caspian Sea in cooperation with local yards and supported by local engineering cooperation partners 8 TECHNIP OFFSHORE FINLAND
Transportation Expertise In the summer of 2001 we carried out the first single piece Truss Spar transport across the Atlantic Ocean from our yard in Finland to the Gulf of Mexico. For this major challenge the largest existing heavy lift carrier was deployed. During the Spring of 2007, the 7th single piece Spar hull was transported to the Gulf of Mexico. Advanced transport analysis and engineering make it possible to perform single piece transport of Spar hulls directly from manufacturing site to area of operation. Norwegian Sea North Sea Pori Barents Sea Kara Sea Paris Baku Caspian Sea Mediterranean Sea Spar hull, supports and ship hull analyzed during sea transportation by a direct spectral based calculation procedure utilizing 3D hydrodynamic and structural models. Transportation of sections through Russian waterways to the Caspian Sea The analysis procedure includes strength check for all structures under the defined extreme conditions, calculation of fatigue damage accumulation at critical locations during the voyage and, in case of overhanging parts, a study of slamming of those parts. TECHNIP OFFSHORE FINLAND 9
Reliable on-time delivery Every time Quality Management System certified by DNV based on international standards We hold the following certifications: SFS-EN ISO 9001:2000 and ISO 14001 EN 729-2: 1994, Quality requirements for welding and ASME S, U and U2 Quality Health, Safety & Environment Technip places the highest emphasis on quality, health, safety and the environment. The health and safety of everyone at worksites, yards and vessels, as well as of the personnel who will operate the industrial facilities, are also a top priority for our yard in Pori, Finland. The same commitment extends to protection of the environment and quality. The concerns are addressed at the earliest stages of design, and appropriate measures are taken at each stage of project execution. Quality objectives govern the way all activities are conducted. Excellent indoor facilities The yard in Pori offers the following: 35,300m² covered heated workshop space Main assembly hall 130m x 29m x 31m, 200t crane capacity, 25m hook height 1,800m² surface protection halls with temperature/humidity control 15,800m² office and heated storage areas Safe and flexible assembly / loadout facilities 330t/50m assembly crane and 2,400t RMS lifting system Two heavy (450t/m and 280t/m) assembly and loadout rails for Spar hull loadout and other heavy assemblies Unique loadout system consisting of the purpose-built 11,000t barge "Harry" which during loadout lies on a concrete foundation on the seabed, together with tolled beam hydraulic skidding equipment. Alternatively, loadout can be handled by multi-wheeler directly to the barge. 10 TECHNIP OFFSHORE FINLAND
Heavy manufacturing and construction technology We manufacture heavy pressure vessels and related equipment for the process and power industries. We also prefabricate and install heavy piping. The materials welded in connection with the projects carried out include carbon and stainless steels, high and low temperature steels, QT-steel as well as compound steel. Machinery at our Pori yard workshops includes a roller for bending (up to 200mm), a press for pressure vessels heads (2,250 metric tons) and a vertical lathe (6.9m diameter). Ammonia gasifier for fertilizer plant Heating coil assembly for S/S process plant vessel Quality of products at Technip s yard in Pori, Finland is based on professional skills and specialized technology using CAD/CAM, a welding laboratory and numerically controlled plasma and oxygenacetylene cutting machines. Flexible automation significantly improves productivity in small series and large size work piece production. Fillet welding with carriage Overhead butt welding carriage Automatic submerged arc welding of deck leg support for Spar hull Plasma cutting machine capable of cutting both carbon steels and top quality alloys High pressure piping for the 560 MW power plant at Tahkoluoto, Finland TECHNIP OFFSHORE FINLAND 11
HEADQUARTERS Technip Tour Technip 6-8 allée de l Arche 92973 Paris La Défense Cedex France Phone: +33 (0)1 47 78 21 21 Fax: +33 (0)1 47 78 33 40 www.technip.com CONTACTS Technip Offshore Finland Mäntyluoto FI-28880 Pori, Finland Phone: +358 2 528 2411 Fax: +358 2 528 2419 This document is the property of Technip and is not intended to be a binding contractual document. Any information contained herein shall not result in any binding obligation on the part of Technip, or any of its affiliates, and is provided for information purposes only. With a workforce of 23,000 people, Technip ranks among the top five corporations in the field of oil, gas and petrochemical engineering, construction and services. The Group is headquartered in Paris. The Group's main operating centers are located in France, Italy, Germany, the UK, Norway, Finland, the Netherlands, the USA, Brazil, Abu-Dhabi, China, India, Malaysia and Australia. In support of its activities, the Group manufactures flexible pipes and umbilicals, and builds offshore platforms in its manufacturing plants and fabrication yards in France, Brazil, the UK, the USA, Finland and Angola, and has a fleet of specialized vessels for pipeline installation and subsea construction. The Technip share is listed on Euronext Paris. Technip - Public Relations Department - April 2008 - Photo credits: Technip