DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage M3D88 Supersedes data of 998 Jun 9 File under Discrete Semiconductors, SC4 998 Aug
FEATURES PINNING - SOT3 Small size Low noise Low distortion High gain Gold metallization ensures excellent reliability. PIN base emitter 3 collector DESCRIPTION APPLICATIONS Communication and instrumentation systems. 3 3 DESCRIPTION Silicon NPN transistor in a surface mount 3-pin SOT3 package. The transistor is primarily intended for wideband applications in the GHz-range in the RF front end of analog and digital cellular telephones, cordless phones, radar detectors, pagers and satellite TV-tuners. Top view Marking code: W. MAM55 Fig. Simplified outline and symbol. QUICK REFERENCE DATA SYMBOL PARAMETER CONDITIONS TYP. MAX. UNIT C re feedback capacitance I C = ; V CB = 6 V; f = MHz.4 pf f T transition frequency I C = 3 ma; V CE =6V; f m = GHz 8 GHz G UM maximum unilateral power gain I C = 3 ma; V CE =6V; T amb =5 C; 4 db f=ghz F noise figure Γ S = Γ opt ; I C = 5 ma; V CE =6V;.3 db f=ghz P tot total power dissipation T s =6 C; note 365 mw R th j-s thermal resistance from junction to soldering point P tot = 365 mw 35 K/W Note. T s is the temperature at the soldering point of the collector pin. 998 Aug
LIMITING VALUES In accordance with the Absolute Maximum Rating System IEC 34. SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT V CBO collector-base voltage open emitter V V CEO collector-emitter voltage open base V V EBO emitter-base voltage open collector.5 V I C collector current (DC) ma I C(AV) average collector current ma P tot total power dissipation T s =6 C; note 365 mw T stg storage temperature 65 +5 C T j junction temperature 75 C Note. T s is the temperature at the soldering point of the collector pin. THERMAL CHARACTERISTICS SYMBOL PARAMETER CONDITIONS VALUE UNIT R th j-s thermal resistance from junction P tot = 365 mw; T s =6 C; note 35 K/W to soldering point; note Note. T s is the temperature at the soldering point of the collector pin. 998 Aug 3
CHARACTERISTICS T j =5 C unless otherwise specified. SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT DC characteristics V (BR)CBO collector-base breakdown voltage I C = µa; I E = V V (BR)CEO collector-emitter breakdown I C = µa; I B = V voltage V (BR)EBO emitter-base breakdown voltage I E =µa; I C =.5 V I CBO collector-base leakage current V CB = V; I E = na I EBO emitter-base leakage current V EB =V; I C = na h FE DC current gain I C = 5 ma; V CE = 6 V 5 I C = 5 ma; V CE =6V AC characteristics C re feedback capacitance I C = ; V CB = 6 V; f = MHz.4 pf f T transition frequency I C = 3 ma; V CE =6V; f m = GHz 8 GHz G UM maximum unilateral power gain; note I C = 3 ma; V CE =6V; T amb =5 C; f = GHz I C = 3 ma; V CE =6V; T amb =5 C; f = GHz F noise figure Γ S = Γ opt ; I C = 5 ma; V CE =6V; f=ghz Γ S = Γ opt ; I C = 5 ma; V CE =6V; f=ghz 4 db 8 db.3 db db Note. G UM is the maximum unilateral power gain, assuming S is zero. G UM = S log-------------------------------------------------------------- ( S ) ( S ) db 998 Aug 4
4 MDA887 MDA888 P tot (mw) h FE 3 8 4 5 5 T s ( C) 3 4 5 I C (ma) V CE =6V. Fig. Power derating as a function of soldering point temperature. Fig.3 DC current gain as a function of collector current; typical values..8 C re (pf).6 MDA889 f T (GHz) 8 MDA89 6.4 4. 4 8 V CB (V) 3 I C (ma) 4 I C = ; f = MHz. V CE = 6 V; f = GHz; T amb =5 C. Fig.4 Feedback capacitance as a function of collector-base voltage; typical values. Fig.5 Transition frequency as a function of collector current; typical values. 998 Aug 5
gain (db) MSG 6 G max MDA89 5 gain (db) 4 G UM MDA89 G UM 3 MSG 8 G max 4 MSG 3 I C (ma) 4 3 4 f (MHz) f = GHz; V CE =6V. I C = 5 ma; V CE =6V. Fig.6 Gain as a function of collector current; typical values. Fig.7 Gain as a function of frequency; typical values. 5 gain (db) 4 MSG G UM MDA893 5 gain (db) 4 MSG G UM MDA894 3 3 G max G max MSG MSG 3 4 f (MHz) 3 4 f (MHz) I C = 5 ma; V CE =6V. I C = 3 ma; V CE =6V. Fig.8 Gain as a function of frequency; typical values. Fig.9 Gain as a function of frequency; typical values. 998 Aug 6
4 F (db) () MDA895 4 F (db) MDA896 3 3 () () () (3) (3) (5) (4) I C (ma) 3 f (MHz) 4 V CE =6V. () f = MHz. () f = 5 MHz. (3) f = MHz. (4) f = 9 MHz. (5) f = 5 MHz. V CE =6V. () I C =3mA. () I C =5mA. (3) I C = 5 ma. Fig. Minimum noise figure as a function of collector current, typical values. Fig. Minimum noise figure as a function of frequency, typical values. 998 Aug 7
APPLICATION INFORMATION SPICE parameters for the die SEQUENCE No. PARAMETER VALUE UNIT IS.963 fa BF.3 3 NF. 4 VAF 64.75 V 5 IKF 84. ma 6 ISE 35.77 fa 7 NE.38 8 BR 9.6 9 NR. VAR 3.98 V IKR 5.77 ma ISC 56.6 aa 3 NC.47 4 RB 6.7 Ω 5 IRB. µa 6 RBM.478 Ω 7 RE.64 Ω 8 RC.35 Ω 9 () XTB. () EG. ev () XTI 3. CJE.6 pf 3 VJE 6. mv 4 MJE.394 5 TF 3.73 ps 6 XTF.5 7 VTF 4.599 V 8 ITF 53.49 ma 9 PTF. deg 3 CJC 49.9 ff 3 VJC 87. mv 3 MJC. 33 XCJC.4 34 TR. ps 35 () CJS. F 36 () VJS 7. mv 37 () MJS. 38 FC.888 SEQUENCE No. PARAMETER VALUE UNIT 39 () C bpb 73. ff 4 () C bpe 3. ff 4 AF. 4 KF 4 x 6 Notes. These parameters have not been extracted, the default values are shown.. C bpb, C bpe ; base-bondpad and emitter-bondpad capacitance to collector. B L Cbe L B QL B = 5; QL E = 5; QL B,E (f)=ql B,E (f/f c ); f c = scaling frequency = GHz. Fig. Package equivalent circuit SOT3. List of components (see Fig.) B' Ccb MBC964 DESIGNATION VALUE UNIT C be 7 ff C cb 8 ff C ce 8 ff L.35 nh L.7 nh L3.35 nh L B.4 nh L E.83 nh E' E C' L E L3 L Cce C 998 Aug 8
handbook, full pagewidth 9. 35.5 45.8.6 8. 3 GHz GHz..5 5 GHz 5.4. 5 MHz 4 MHz. MHz MHz 5 35.5 45 9 MDA77. V CE = 6 V; I C = 3 ma; Z o =5Ω. Fig.3 Common emitter input reflection coefficient (S ); typical values. handbook, full pagewidth 9 35 45 4 MHz MHz MHz 5 4 3 8 5 MHz GHz GHz 3 GHz 35 45 9 MDA773 V CE = 6 V; I C = 3 ma. Fig.4 Common emitter forward transmission coefficient (S ); typical values. 998 Aug 9
handbook, full pagewidth 9 35 45 3 GHz GHz.5.4.3.. 8 4 MHz GHz 5 MHz MHz 35 45 9 MDA774 V CE = 6 V; I C = 3 ma. Fig.5 Common emitter reverse transmission coefficient (S ); typical values. handbook, full pagewidth 9. 35.5 45.8.6. 5.4. 8...5 5 GHz GHz 4 MHz 5 MHz 3 GHz MHz 5 MHz 35.5 45 9 MDA775. V CE = 6 V; I C = 3 ma; Z o =5Ω. Fig.6 Common emitter output reflection coefficient (S ); typical values. 998 Aug
handbook, full pagewidth unstable region source 9 unstable region load. 35.5 45.8.6. Γ OPT 5.4 8 NF =.3 db G = 5 db.5 5 G = 4 db NF =.5 db NF =.7 db. G = 3 db 5. 35.5 45 f = GHz; V CE = 6 V; I C = 5 ma; Z o =5Ω. 9 MDA77. Fig.7 Common emitter available gain circles; typical values. handbook, full pagewidth 9 unstable region load. 35.5 45.8 G max = 9.64 db.6 8. NF =.6 db NF =.4 db..5 5 NF =. db 5.4. G = 9 db. Γ OPT 5 G = 8 db unstable region source 35 G = 7 db.5 45 f = GHz; V CE = 6 V; I C = 5 ma; Z o =5Ω. 9 MDA77. Fig.8 Common emitter available gain circles; typical values. 998 Aug
PACKAGE OUTLINE Plastic surface mounted package; 3 leads SOT3 D B E A X H E v M A 3 Q A A c e bp w M B Lp e detail X mm scale DIMENSIONS (mm are the original dimensions) UNIT A A max.. mm..9 b p c D E e e H E L p Q v w.48.38.5.9 3..8.4..9.95.5..45.5.55.45.. OUTLINE VERSION REFERENCES IEC JEDEC EIAJ EUROPEAN PROJECTION ISSUE DATE SOT3 97--8 998 Aug
DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains final product specifications. Short-form specification The data in this specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 34). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. 998 Aug 3
NOTES 998 Aug 4
NOTES 998 Aug 5
a worldwide company Argentina: see South America Australia: 34 Waterloo Road, NORTH RYDE, NSW 3, Tel. +6 985 4455, Fax. +6 985 4466 Austria: Computerstr. 6, A- WIEN, P.O. Box 3, Tel. +43 6, Fax. +43 6 Belarus: Hotel Minsk Business Center, Bld. 3, r., Volodarski Str. 6, 5 MINSK, Tel. +375 7 733, Fax. +375 7 773 Belgium: see The Netherlands Brazil: see South America Bulgaria: Philips Bulgaria Ltd., Energoproject, 5th floor, 5 James Bourchier Blvd., 47 SOFIA, Tel. +359 689, Fax. +359 689 Canada: PHILIPS SEMICONDUCTORS/COMPONENTS, Tel. + 8 34 738 China/Hong Kong: 5 Hong Kong Industrial Technology Centre, 7 Tat Chee Avenue, Kowloon Tong, HONG KONG, Tel. +85 39 7888, Fax. +85 39 77 Colombia: see South America Czech Republic: see Austria Denmark: Prags Boulevard 8, PB 99, DK-3 COPENHAGEN S, Tel. +45 3 88 636, Fax. +45 3 57 44 Finland: Sinikalliontie 3, FIN-63 ESPOO, Tel. +358 9 658, Fax. +358 9 6589 France: 5 Rue Carnot, BP37, 956 SURESNES Cedex, Tel. +33 4 99 66, Fax. +33 4 99 647 Germany: Hammerbrookstraße 69, D-97 HAMBURG, Tel. +49 4 3 53 6, Fax. +49 4 3 536 3 Greece: No. 5, 5th March Street, GR 7778 TAVROS/ATHENS, Tel. +3 4894 339/39, Fax. +3 484 4 Hungary: see Austria India: Philips INDIA Ltd, Band Box Building, nd floor, 54-D, Dr. Annie Besant Road, Worli, MUMBAI 4 5, Tel. +9 493 854, Fax. +9 493 966 Indonesia: PT Philips Development Corporation, Semiconductors Division, Gedung Philips, Jl. Buncit Raya Kav.99-, JAKARTA 5, Tel. +6 794 4 ext. 5, Fax. +6 794 8 Ireland: Newstead, Clonskeagh, DUBLIN 4, Tel. +353 764, Fax. +353 764 Israel: RAPAC Electronics, 7 Kehilat Saloniki St, PO Box 853, TEL AVIV 68, Tel. +97 3 645 444, Fax. +97 3 649 7 Italy: PHILIPS SEMICONDUCTORS, Piazza IV Novembre 3, 4 MILANO, Tel. +39 675 53, Fax. +39 675 557 Japan: Philips Bldg 3-37, Kohnan -chome, Minato-ku, TOKYO 8-857, Tel. +8 3 374 53, Fax. +8 3 374 577 Korea: Philips House, 6-99 Itaewon-dong, Yongsan-ku, SEOUL, Tel. +8 79 4, Fax. +8 79 45 Malaysia: No. 76 Jalan Universiti, 46 PETALING JAYA, SELANGOR, Tel. +6 3 75 54, Fax. +6 3 757 488 Mexico: 59 Gateway East, Suite, EL PASO, TEXAS 7995, Tel. +9-5 8 34 738 Middle East: see Italy Netherlands: Postbus 95, 56 PB EINDHOVEN, Bldg. VB, Tel. +3 4 7 8785, Fax. +3 4 7 88399 New Zealand: Wagener Place, C.P.O. Box 4, AUCKLAND, Tel. +64 9 849 46, Fax. +64 9 849 78 Norway: Box, Manglerud 6, OSLO, Tel. +47 74 8, Fax. +47 74 834 Pakistan: see Singapore Philippines: Philips Semiconductors Philippines Inc., 6 Valero St. Salcedo Village, P.O. Box 8 MCC, MAKATI, Metro MANILA, Tel. +63 86 638, Fax. +63 87 3474 Poland: Ul. Lukiska, PL 4-3 WARSZAWA, Tel. +48 6 83, Fax. +48 6 37 Portugal: see Spain Romania: see Italy Russia: Philips Russia, Ul. Usatcheva 35A, 948 MOSCOW, Tel. +7 95 755 698, Fax. +7 95 755 699 Singapore: Lorong, Toa Payoh, SINGAPORE 3976, Tel. +65 35 538, Fax. +65 5 65 Slovakia: see Austria Slovenia: see Italy South Africa: S.A. PHILIPS Pty Ltd., 95-5 Main Road Martindale, 9 JOHANNESBURG, P.O. Box 743 Johannesburg, Tel. +7 47 59, Fax. +7 47 5494 South America: Al. Vicente Pinzon, 73, 6th floor, 4547-3 SÃO PAULO, SP, Brazil, Tel. +55 8 333, Fax. +55 8 38 Spain: Balmes, 87 BARCELONA, Tel. +34 93 3 63, Fax. +34 93 3 47 Sweden: Kottbygatan 7, Akalla, S-6485 STOCKHOLM, Tel. +46 8 5985, Fax. +46 8 5985 745 Switzerland: Allmendstrasse 4, CH-87 ZÜRICH, Tel. +4 488 74 Fax. +4 488 363 Taiwan: Philips Semiconductors, 6F, No. 96, Chien Kuo N. Rd., Sec., TAIPEI, Taiwan Tel. +886 34 865, Fax. +886 34 874 Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd., 9/ Sanpavuth-Bangna Road Prakanong, BANGKOK 6, Tel. +66 745 49, Fax. +66 398 793 Turkey: Talatpasa Cad. No. 5, 864 GÜLTEPE/ISTANBUL, Tel. +9 79 77, Fax. +9 8 677 Ukraine: PHILIPS UKRAINE, 4 Patrice Lumumba str., Building B, Floor 7, 54 KIEV, Tel. +38 44 64 776, Fax. +38 44 68 46 United Kingdom: Philips Semiconductors Ltd., 76 Bath Road, Hayes, MIDDLESEX UB3 5BX, Tel. +44 8 73 5, Fax. +44 8 754 84 United States: 8 East Arques Avenue, SUNNYVALE, CA 9488-349, Tel. + 8 34 738 Uruguay: see South America Vietnam: see Singapore Yugoslavia: PHILIPS, Trg N. Pasica 5/v, BEOGRAD, Tel. +38 65 344, Fax.+38 635 777 For all other countries apply to: Philips Semiconductors, International Marketing & Sales Communications, Building BE-p, P.O. Box 8, 56 MD EINDHOVEN, The Netherlands, Fax. +3 4 7 485 Internet: http://www.semiconductors.philips.com Philips Electronics N.V. 998 SCA6 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 54//5/pp6 Date of release: 998 Aug Document order number: 9397 75 435