Plasma range PRESTOJET / PLASMAJET

Plasma range PRESTOJET / PLASMAJET A complete range of installations for manual plasma cutting and gouging 008-0 www.saf-fro.com

The plasma expert 00-090 00-00 00-89 00-0 The plasma process Principles Plasma arc, created from a combination of direct electric current and gas flow, is strongly constricted by a nozzle which gives the resulting jet formidable, thermal and kinetic energy. The transfer of this energy to the part to be cut results in localized melting of the metal and its ejection from the cut. Performance To maximize the service life of the wear parts: electrodes, nozzles and guide shoes, it is important to pay close attention to the conditions for piercing in mid-plate, and also to the main cutting parameters. The correct combination of settings, according to the thickness to be cut - power, nozzle diameter, gas flow rate, separation distance, speed of movement of the torch yields optimum results in terms of width of cut, lead angle, spatters and smooth cut surface with very little dross. Plasma gouging 000- The plasma gouging process is performed with a standard plasma cutting torch by only changing the nozzle, the skirt and the skate. Using the same principle of plasma cutting it 007-98_ret allows metal to be removed in an efficient, precise and clean way. Benefits: reduced noise and smoke compared with other thermal gouging methods, high metal removal rate (up to kg / hour) with superior precision, reduced risk of carbon contamination compared with the arc gouging process, possibility to gouge ferrous and non-ferrous metals. Drag cutting The direct contact between the cutting nozzle and the workpiece provides several benefits in comparison with the distance cutting method. This particular position allows most of the smoke, spatters and arc radiation to be kept under the metal sheet thus protecting the operator. The result of a drag cut is very clean and the resulting kerf is a much more narrow, superior precision quality cut. The drag cutting process is ideal up to 8 mm thickness for all those applications where accuracy is required. 007-98_ret Capacity Plasma cutting equipment is characterized by the thicknesses that it is capable of: Piercing in mid-plate, with minimum risk for nozzles and guide shoes. -0 Cutting with satisfactory quality and a comfortable cutting speed. -0 Separation cutting at the limits of capacity. -0

0-7 007-79 00- Selection table Product name Main supply Weight Dimensions (mm) Output current Duty cycle @ 0 C Digital Display Gouging Auto. version Cutting gas Technology Cooling PRESTOJET K -ph 0 V kg 70 x 0 x 70 0-0 A 0 A - % Yes No No Air Inverter Air PRESTOJET -ph 0 V 8 kg x 8 x 0 0-0 A 0 A - % Yes No No Air Inverter Air PRESTOJET -ph 0 V or 00 V kg x x 80 0 - A A - 0% Yes Yes No Air Inverter Air PRESTOJET C -ph 00 V kg 70 x 0 x 0 0-0 A 0 A - 0% Yes Yes Yes Air Inverter Air PLASMAJET C PLASMAJET C NERTAJET 0 -ph 0/0/ 80/00 V -ph 0/0/ 80/00 V -ph 0/00/ /0 V 80 kg 00 x 8 x 7 0 / 0 / 80 A 80 A - 0% No No No Air Transformer Air kg 00 x 8 x 7 0 kg 70 x 70 x 00 / 0 / 8 0 A 0 A - 0% No No No Air Transformer Air 0 / 0 / 0 00 / 0 A 0 A - 00% No Yes Yes Air / N Ar / H Chopper Water

Synergic Puls PRESTOJET Multi K-single phase portable cutter Voltage Electronic Setting Program 00-08 It is the portable solution with built-in air compressor for manual plasma cutting. Some of the user benefits are: a built-in air compressor to cut everywhere with just a A domestic plug, possibility to regulate the cutting current up to 0 A (to cut up to 0 mm - severance cut on carbon steel). The digital display of the parameters allows an easy and precise interface to achieve the best results in a simple way. All this performance and only kg, it is the lightest unit on the market. PRESTOJET K Y S 00-090 p h SINGLE-PHASE Product features High tech: microprocessor control and digital display. High quality contact cut, genuine cut up to 8 mm and severance cut up to 0 mm. Low air and current consumption. Increased safety due to the patented features of its new torch. Light: easy to transport everywhere, (only kg). No HF: starting with blow-back prevention from HF pollution. Long nozzle and electrode for angle cutting. Technical characteristics PRESTOJET K Primary input Single phase input 0 V +/- 0% - 0-0 Hz Effective consumption. A Output Cutting current 0-0 A Duty cycle at 0 C 0 A at % Protection index IP Insulation class Standards EN 097- ; EN 097-7 ; EN 097-0 Dimensions (l x w x h) Net weight To order Packages including: a power source, PRESTOJET K a torch m, a m earth cable with clamp, a set of wear parts, a m primary cable Torch CPT 800 - m Wear parts for CPT 800 Adds-ons - - - - 7 H 70 x 0 x 70 mm kg W00070 W0007097 Electrode W0007 Diffuser W0007 0. nozzle W000799 0.8 nozzle W0007 TN skirt W0007 TI skirt W0007 Wrench W00078 Long electrode W000789 0,8 long nozzle W000788 Cutting compass Wear parts box W0000 W000770 009-00 0-7 - - Torch body with equipped handle 7 INTEGRATED COMPRESSOR TECHNOLOGY WEAR PARTS BOX Cat n : W000770 With the reduction of size and weight for compressors and inverter power sources it is now possible to produce a new generation of plasma units needing only a A power supply to cut. The built-in compressor provides the air for both the plasma and cooling flow and allows cutting of all metals up to 8 mm with a quality cut and 0 mm with a severance cut. 007-98 0-008

Synergic Puls PRESTOJET Multi Voltage Electronic Setting Program 007-0 This lightweight set provides a cutting current up to 0 A, to cut with genuine quality up to 8 mm (severance 0 mm). Controlled by a microprocessor, this electronic unit shows parameters and messages through the digital display. The pressure is measured with an electronic sensor and the inverter technology allows low current consumption. The safety of the operator is assured by the design of the torch and the protection of the trigger. 00-89 Technical characteristics PRESTOJET Primary input Single phase input 0 V +/- 0% - 0-0 Hz Effective consumption A Output Cutting current 0-0 A Compressed air Duty cycle at 0 C A at 0% 0 A at % bars - 00 l/min Protection index IP Insulation class Standards EN 097- ; EN 097-7 ; EN 097-0 Dimensions (l x w x h) Net weight To order Packages including: a power source, PRESTOJET a torch m, a m earth cable with clamp, a set of wear parts, a m primary cable H x 8 x 0 mm 8 kg W000770 Torch CPT 800 - m W0007097 Wear parts for CPT 800 Electrode W0007 Diffuser W0007-0. nozzle W000799-0.8 nozzle W0007 - TN skirt W0007 - TI skirt W0007 Wrench W00078 Long electrode W000789 7 0,8 long nozzle W000788 Adds-ons Cutting compass W0000 Wear parts box W000770 p h SINGLE-PHASE PRESTOJET Product features High tech: microprocessor control and digital display. High quality contact cut: genuine cut up to 8 mm and severance cut up to 0 mm. Low air and current consumption. High operator safety. Light: easy to transport, weight only 8 kg. Reliable and strong: robust design. Long nozzle and electrode for angle cutting. 009-00 0-7 - - - Torch body with equipped handle 7 INVERTER ADVANTAGES WEAR PARTS BOX Cat n : W000770 The inverter technology provides at least decisive advantages that assure a very quick pay-back for this kind of installation: High efficiency (~99%) and low power consumption, around 0% less than an equivalent transformer. Light weight ( times less than a traditional unit) and small size, with the possibility to carry the units and move them easily for flexible on-site use. Continuous current setting with flat DC current that gives a superior quality cut with a very smooth cut surface. 0-008

PRESTOJET : the power of technology 00-0 With its portability and high power, this new unit is perfect for all maintenance operations. The duty cycle at 0 C allows use for heavy duty operations, including automatic applications and gouging. The autolink feature and the digital display give the maximum flexibility together with top performance. PRESTOJET Product features High quality cut due to the patented SAF-FRO technology. Heavy duty cycle 0% at 0 C for intensive applications. Autolink function (automatic setting of the net supply 0 V or 00 V). Light ( kg), small and powerful (up to 0 mm thickness). Easy to use due to the digital display. Gouging possibilities. 009-00 007-77 PRESTOJET - Front panel 8 7. Cutting mode. Grid cutting. Gouging. Air pressure setting. Alarm indicator. Reset button 7. Setting knob 8. Digital display Technical characteristics PRESTOJET Primary input Input voltage three phases 0 V - 00 V +/- 0 % with autolink 0/0 Hz Max. input current at 00 V. A Max. input current at 0 V A Output Cutting current 0 - A Duty cycle at 0 C 00 V A at 0% 0 A at 00% Duty cycle at 0 C 0 V 0 A at 00% Compressed air bars - 80 l/min Protection index IP S Insulation class H Standards EN 097- ; EN 097-7 ; EN 097-0 Dimensions (l x w x h) x x 80 mm Net weight kg To order Package including a power source, a torch m, a m earth cable with clamp, a m air cable, a set of W000770 wear parts, a m primary cable Torch CP. - m W00009 Wear parts for JET CP. FL electrode W00007 L. nozzle W00008 TN skirt for drag cutting W00000 TN skirt for distance cutting W00000 Wrench W000078 Adds-ons Cutting compass W0000 Wear parts box W00077

009-08 Light Powerful Flexible Robust BLOW-BACK CLEAN STARTING ADVANTAGES Blow back technology, based on the movement of the electrode during the ignition phase, is much cleaner and safer compared with traditional High Frequency starting. Clean because the electromagnetic emissions are at a minimum level, which means protection for other electronic devices such as computers, NC machines. Safe because there is no risk of high frequency dispersion and of interference with other machines. 007-98 00-08_ret O. RING NOZZLE Cat n : W0009 WEAR PARTS BOX Cat n : W00077 0-009 00-8 ELECTRODE FL Cat n : W00007 007- ELECTRODE C Cat n : W00007 008-0 ELECTRODE L Cat n : W000707 00-8 NOZZLE L.0 Cat n : W00007 NOZZLE L. Cat n : W00008 007- NOZZLE C.0 Cat n : W00007 NOZZLE C. Cat n : W00007 00-8 GOUGING NOZZLE G.0 Cat n : W000070 007-987 SKIRT TN Cat n : W00000 007-987 SKIRT TN Cat n : W00000 007-987 SKIRT TN Cat n : W00000 00-0 SKIRT TI Cat n : W000700 007-989 SKATE 0 A Cat n : W000009 007-99 SKATE FOR GOUGING 0 A Cat n : W00007 Drag cutting from 0. to 8 mm Distance cutting from to 0 mm Plasma gouging 7

PRESTOJET C, the top performer 909-0 PRESTOJET C is the most powerful unit on the market based on advanced inverter technology. With 0 A at 0% duty cycle at 0 C, it is the ideal solution for intensive applications up to 0 mm thickness. This superior performance and the quick torch connection also allows it to be used for automatic applications. The digital display provides a precise and repeatable control of the cutting parameters to achieve the maximum quality. RANTY 8 DIGITAL CONTROL AND DIGITAL DISPLAY ADVANTAGES Repeatability of the parameters. Precise current and pressure control. Possibility to display the machines parameters, such as internal temperature or primary supply voltage for total control of the process. Easy interface and messages from the machine for warning purpose assuring high safety and reliability. PRESTOJET C - Front panel. Digital display.. Setting knob.. Reset button.. LEDs of operating mode.. On/Off switch. 0-7 0-7 PRESTOJET C Product features Lightweight ( kg). Cuts up to 0 mm. Perfect quality cut due to patented consumables. Quick connection torch for easy maintenance. Gouging position. Digital display for ease of use. Heavy duty cycle 0% at 0 C. Automatic version. Technical characteristics PRESTOJET C Primary input Input voltage phases 00 V +/- 0% - 0/0 Hz Max. input current 0. A Output Cutting current 0-0 A Compressed air Protection index Insulation class Duty cycle at 0 C 00 V 0 A at 0% 00 A at 00% bars - 00 l/min IP S Standards EN 097- ; EN 097-7 ; EN 097-0 Dimensions (l x w x h) Net weight To order Package including a power source, a torch m, a m earth cable with clamp, a m air cable, a set of wear parts, a m primary cable PRESTOJET C without torch PRESTOJET C automatic package* Torch JET CP.0C - m Torch JET CP.0C - m Wear parts for JET CP.0C FL electrode C electrode L. nozzle C. nozzle Drag skirt Distance skirt Skate 0 A Wrench Adds-ons Cutting compass Wear parts box Trolley Trolley for on site works (folding) *Delivered with a m torch OCP 00. H 70 x 0 x 0 mm kg W0007 W000780 W000788 W00078 W00078 W00007 W00007 W00008 W00007 W00008 W00007 W000078 W0000 W0000 W00077 W00098 W00077

0-7 Maximum power Minimum weight Central connection for the torch PLASMA TROLLEY Cat n : W00077 Trolley for on site works (folding) allows the easy transportation of the power source 0- Cat n : W00098 A trolley is also available for easier transportation and to store all accessories. 007-888 007-_ret WEAR PARTS BOX Cat n : W00077 0-00 O. RING NOZZLE Cat n : W0009 00-8 ELECTRODE FL Cat n : W00007 007- ELECTRODE C Cat n : W00007 008-0 ELECTRODE L Cat n : W00007 008-0 NOZZLE FL 0. Cat n : W0000 NOZZLE FL 0.8 Cat n : W00009 NOZZLE L.0 Cat n : W00007 NOZZLE L. Cat n : W00008 007- NOZZLE C.0 Cat n : W00007 NOZZLE C. Cat n : W00007 NOZZLE C. Cat n : W0000 NOZZLE C. Cat n : W00007 00-8 GOUGING NOZZLE G. Cat n : W00007 007-99 007- SKIRT DRAG 0 A Cat n : W00008 007- SKIRT DISTANCE 0 A Cat n : W00007 SKATE 0 A Cat n : W0000 009- SKIRT ARC PROTECTED Cat n : W00070 00-0 BEVELING SKIRT Cat n : W0007878 SKIRT FOR GOUGING 0 A Cat n : W0000 007-99 SKATE FOR GOUGING 0 A Cat n : W00007 Drag cutting from 0. to 8 mm Distance cutting from to 0 mm Plasma gouging 9

PLASMAJET C and C - ph industrial cutters 909-0 With this machine using proven traditional technology, cutting is simpler and safer than ever. Delivered ready to use with cutting torch, air hose and wear parts starting set. The selection of one of the steps allows cutting up to mm on carbon steel. Its heavy duty cycle 0% at 0 C makes it suitable for intensive applications. And the IP protection index indicates that this unit is suitable for outdoor use. PLASMAJET C Product features Powerfull: 80 A with 0% at 0 C duty cycle. steps to simplify the selection of the right current according to the thickness to be cut. Maximum quality and safety with the patented torch. Drag cutting up to 8 mm for maximum quality. Delivered ready to use. IP for use on outdoor sites. wheels and a strong design for intensive industrial use. Central connector for easy connection. 00-0 Technical characteristics PLASMAJET C Primary input Input voltage phases 0/0/80/00 V - 0-0 Hz High Power Factor Max. input current 9/7/8./7 A Output Cutting current 0-0 - 80 A Duty cycle at 0 C 00 V 80 A at 0% 0 A at 80% 0 A at 00% Compressed Synergic air Puls bars - 80 l/min Protection index IP Insulation class H Standards EN 097- ; EN 097-7 ; EN 097-0 Dimensions (l x w x h) 00 x 8 x 7 mm Net weight Multi 80 kg To order Voltage Package including a power source, a torch m, a m earth cable with clamp, a m air cable, a set of W000798 wear parts, a m primary cable Electronic Torch JET CP Setting.0C - Program m W00078 Torch JET CP.0C - m W00078 Wear parts for JET CP.0C FL electrode W00007 L. nozzle W00008 Skirt for drag cutting W00008 C electrode W00007 C. nozzle W0000 Skirt for distance cutting W00007 7 Skate 0 A W0000 8 Skirt arc protected W00070 9 Skirt beveling W0007878 0 Wrench W000078 O. ring nozzle W0009 Adds-ons Cutting compass W0000 Wear parts box W00077 Drag cuting TRANSFORMER TECHNOLOGY ADVANTAGES Reliable due to its power circuit, without electronic components. Easy to repair. Easy to use and to set with the current step selector. 8-07 0 Torch body Distance cuting 8 9 7 007-_ret 0-0 WEAR PARTS BOX Cat n : W00077 0-00 0

Cutting capacity up to 0 mm thick carbon steel with 0% duty cycle at 0 C makes this unit a unique combination of power, reliability and simplicity. The transformer technology, coupled to the new JET CP, assures the best cutting quality at a very attractive price. 7- PLASMAJET C Product features High cutting capacity: 0 mm with 0 A. Technical characteristics PLASMAJET C Primary input Input voltage phases 0/0/80/00 V - 0-0 Hz Max. input current 7/7//0 A Output Cutting current 0-0 - 8-0 A Compressed air Duty cycle at 0 C 00 V 0 A at 0% 8 A at 7% 0 A at 00%. bars - 0 l/min Protection index IP Insulation class Standards EN 097- ; EN 097-7 ; EN 097-0 Dimensions (l x w x h) Net weight To order Package including a power source, a torch m, a m earth cable with clamp, a m air cable, a set of wear parts, a m primary cable High duty cycle: 0% at 0 C. steps for setting the current according to the thickness to cut. IP for indoor and outdoor applications. High quality cut with drag cutting nozzles. Delivered ready to use with m torch, air hose, primary cable, earth cable, starting set of wear parts. Central connector for easy connection. H 00 x 8 x 7 mm kg W000798 Torch JET CP.0C - m W00078 Torch JET CP.0C - m W00078 Wear parts for JET CP.0C FL electrode W00007 L. nozzle W00008 Skirt for drag cutting W00008 C electrode W00007 C. nozzle W0000 Skirt for distance cutting W00007 7 Skate 0 A W0000 8 Skirt arc protected W00070 9 Skirt beveling W0007878 0 Wrench W000078 O. ring nozzle W0009 Adds-ons Cutting compass W0000 Wear parts box W00077 00- C A Drag cuting 0 Torch body Distance cuting 007-_ret 0-0 PLASMAJET C - Front panel. On/Off switch.. Protection on.. Insufficient pressure.. Reset button.. Shield cup disconnected. 8 9 7 B NEW DESIGN A B C wheels for indoor and outdoor use. Rubber frame for shock prevention. Air filter regulator protection. WEAR PARTS BOX Cat n : W00077 00-0-00

NERTAJET 0 000-8 The NERTAJET 0 belongs to the top of the plasma cutting range. With its 00% duty cycle up to 0 A, it is possible to cut a 0 mm thickness. In addition, this power source can be used for automatic applications with the adapted liquid cooled torch. One of the several advantages is the possibility to use an Argon- Hydrogen mix to cut stainless steel and aluminium with the maximum quality. An efficient set for plasma gouging is also available. NERTAJET 0 Product features 0 A at 00% to cut up to 0 mm. Built-in liquid cooling unit. Possibility to cut with compressed air, Nitrogen and Argon/Hydrogen for maximum quality. Double flux to protect the cutting zone. Gouging option. Automatic cycle version available. Torch body 00-0 00-09 Distance cutting Plunger tube Electrode Nozzle Skirt Gouging Key Electrode 007-79 Technical characteristics NERTAJET 0 Primary input Input voltage phases 0/00//0 V - 0-0 Hz Max. input current 08.8/./0./.9 A Output Cutting current 0-0 - 0-00 - 0 A Duty cycle at 0 C 00 V 0 A at 00% Cooling water Compressed air bars - 70 l/min Protection index IP Insulation class H Standards EN 097- ; EN 097-0 ; EN 097-7 Dimensions (l x w x h) 70 x 70 x 00 mm Net weight 0 kg To order Power source only W0000077 Package air including a power source, a torch m, a m earth cable with clamp, a m air cable, a set of wear parts, protection kit W0000078 Package Ar/H & N including a power source, a torch m, a m earth cable with clamp, a m air cable, a set of wear parts, protection kit W0000079 Plunger tube W0008 Key NERTAJET 0 W0008 Electrode Air W0000 Electrode N W0000 000-9 Electrode Ar/H W0000 Nozzle 0 A W00007 Nozzle 0 A W00009 Nozzle 00 A W00007 Nozzle 0 A W00007 Nozzle for gouging W0000 Skirt P flat W0000 Skirt C conical W00007 Adds-ons Wear parts box air W0000 Wear parts box Ar/H and N W0000 00-0 Plunger tube NERTAJET 0 Front panel. Red warning LEDs.. Process selection: cutting, sheet perforation, gouging. Trigger's positions. -07 The standard position of the trigger is in the front part of the torch for precision cutting. -0 +/- torch head rotation for bevel cutting or gouging.. Green LEDs: for powering with phases.. Current range selector.. Push buttons for gas test.. Pressure gauges: arc pilot gas/cutting gas. -09 One movement slide back of the trigger to protect the hand from heating during maximum intensity applications. -09 Double action trigger for maximum safety. 007-78

007-888 Options and accessories 007-897 Longer torches Plasma trolley Cat n : W00077 0- Cat n : W00098 Torch JET CP 0C - m for PLASMAJET C, C and PRESTOJET C Cat n : W00078 007-99 Complete wear part list Torch CP. - m for PRESTOJET Cat n : W00000 007-9 Automatic torch 007-898 Simple version OCP00S CC - 0 m For machines with central connector - Cat n : W00070 Compass for all torches 007-89 Cat n : W0000 PN Description PRESTOJET K PRESTOJET PRESTOJET PRESTOJET C PLASMAJET C PLASMAJET C NERTAJET 0 W0007 DIFFUSER W0007 ELECTRODE W000789 ELECTRODE LONG W0007 SKIRT TN W0007 SKIRT TI W000799 NOZZLE 0. W0007 NOZZLE 0.8 W000788 NOZZLE LONG 0.8 W00007 ELECTRODE C W00007 ELECTRODE FL W00007 ELECTRODE L W0000 ELECTRODE AIR W0000 ELECTRODE NITROGEN W0000 ELECTRODE Ar/H W0000 NOZZLE FL 0. W00009 NOZZLE FL 0.8 W00007 NOZZLE L.0 W00008 NOZZLE L. W00007 NOZZLE C.0 W00007 NOZZLE C. W0000 NOZZLE C. W00007 NOZZLE C. W00009 NOZZLE C.8 W00007 NOZZLE 0 A W00009 NOZZLE 0 A W00007 NOZZLE 00 A W00007 NOZZLE 0 A W00007 NOZZLE GOUGING G. W000070 NOZZLE GOUGING G.0 W0000 NOZZLE FOR GOUGING Z.0 W00000 SKIRT TN W000700 SKIRT TI W00007 SKIRT DISTANCE TI 0 A W00008 SKIRT DRAG TN 0 A W0000 SKIRT FOR GOUGING 0A CP W0000 SKIRT P W00007 SKIRT C W000009 SKATE FOR SKIRT TN W0000 SKATE SKIRT CP W00007 SKATE FOR GOUGING CP. W00007 SKATE FOR GOUGING CP W000078 KEY FOR JET CP TORCH W00070 SKIRT ARC PROTECTED W0007878 SKIRT FOR BEVELING W0007878 KEY WRENCH FOR CPT 800

Contacts BELGIUM AIR LIQUIDE WELDING BELGIUM SA Z.I. West Grijpen - Grijpenlaan - 00 TIENEN Tel.: + 80 8 0 - Fax: + 78 9 CHINA SAF SHANGHAI REP.OFF. Rm 7 Pine City Hotel 777 Zhao Jia Bang Lu - SHANGHAI 000 Tel.: +8 89 9 - Fax: +8 8 97 CZECH REPUBLIC AIR LIQUIDE CZ S.R.O. - Welding and Cutting Podnikatelská - Areál SVUM - 90 PRAHA 9 - Búchovice Tel.: +0 7 0 - Fax: +0 7 0 FRANCE AIR LIQUIDE WELDING FRANCE, rue d Épluches - BP 700 Saint-Ouen l'aumône 9 CERGY PONTOISE Cedex Tel.: + - Fax: + 0 GERMANY OERLIKON SCHWEISSTECHNIK GmbH Industriestrasse - D-70 EISENBERG/PFALZ Tel.: +9 70 - Fax: +9 7 HUNGARY AIR LIQUIDE HUNGARY - Welding & Cutting Krisztina krt. 9/b - H-0 BUDAPEST Tel.: + 9 80 - Fax: + 9 89 ITALY AIR LIQUIDE WELDING ITALY Via Torricelli /A - 7 VERONA Tel.: +9 0 8 9 - Fax: +9 0 8 9 LUXEMBOURG AIR LIQUIDE WELDING LUXEMBOURG S.A. rue de la Déportation - BP 8 - L- LUXEMBOURG Tel.: + 8 - Fax: + 8 7 MALAYSIA SAF-OERLIKON MALAYSIA SDN BHD No 0, Jalan TPP / Taman Perindustrian Puchong - 700 PUCHONG, SELANGOR Tel.: +0 800 88 - Fax: +0 80 0 NETHERLANDS AIR LIQUIDE WELDING NETHERLANDS Rudonk B - NL 8 AJ BREDA Tel.: + 7 00 80 - Fax: + 7 8 9 POLAND AIR LIQUIDE WELDING POLSKA - SP. Z.o.o UL. Porcelanowa 0-0- KATOWICE Tel.: +8 09 0 0 - Fax: +8 09 0 0 ALW Export Department Italy Via Torricelli/A 7 VERONA Tel.: +9 0 8 9 - Fax: +9 0 8 9 E-mail: export.alwitaly@airliquide.com Contacts for other countries: www.airliquide.com PORTUGAL AIR LIQUIDE SOLDADURA LDA Rua Dr. António Loureiro Borges, - Arquiparque Miraflores - 9- ALGÉS Tel: + 900 - Fax: + 9 0 ROMANIA DUCTIL Aleea Industriilor Nr - 0 BUZAU Tel.: +0 8 7 08 - Fax: +0 8 7 8 RUSSIA AIR LIQUIDE WELDING 7 Vorontsovskaya Str. - 097 MOSCOW Tel.: +7 9 8 98 - Fax: +7 9 8 9 SCANDINAVIA OERLIKON SKANDINAVIEN AB Krossverksgatan 7 - LIMHAMN Tel.: + (0)0 70 00 - Fax: + (0)0 70 0 SLOVAKIA AIR LIQUIDE WELDING CENTRAL EUROPE S.R.O. Hlohovecká - 9 NITRA - LUŽIANKY Tel.: + 7 9 0 - Fax: + 7 8 0 SPAIN OERLIKON SOLDADURA SA Poligono Industrial la Noria Carretera de Castellon Km-,00-070 El Burgo de Ebro - ZARAGOZA Tel.: + 97 0 7 00 - Fax: + 97 0 7 SWITZERLAND OERLIKON SCHWEISSTECHNIK AG Mandachstrasse - CH 8 NIEDERHASLI Tel.:+ 07 - Fax: + 07 THAILANDE AIR LIQUIDE WELDING THAILAND Co. Ltd. 0 Moo - Ramindra Road Km 9. - KHANNAYAO, BANGKOK 00 Tel.: + 9 0 - Fax: + 9 UAE AIR LIQUIDE WELDING MIDDLE EAST FZE Jebel Ali free zone warehouse No. FZSAH0 P.O. BOX 87 - Jebel Ali - DUBAI Tel.: +97(0)880 - Fax: +97(0)8808 U. K. AIR LIQUIDE WELDING Ltd Low March / London Road - DAVENTRY - Northants NN SD Tel.: + 7 70 - Fax: + 7 70 0 UKRAINE AIR LIQUIDE WELDING UKRAINE, Llc. Moskovskij Prospect 99 - Office 9-07 KHARKOV Tel.: +8 07 78 08 - Fax: +8 07 78 08 ALW Export Department France, rue d'epluches BP 700 Saint Ouen l'aumône 9 CERGY-PONTOISE Cedex Tel.: + - Fax: + 0 7 9 7 E-mail: export.alwfrance@airliquide.com Air Liquide Welding France reserves the right to carry out modifications to its machinery without prior notice. The manufacturer accepts no liability for illustrations, descriptions and characteristics, which are for information only. ALW - W000707-0/0 PLDB 77 - Photos: JSR - Woss - Couv.: gettyimages.com Air Liquide is the world leader in gases for industry, health and the environment, and is present in over 80 countries with 00 employees. Oxygen, nitrogen, hydrogen and rare gases have been at the core of Air Liquide s activities since its creation in 90. Using these molecules, Air Liquide continuously reinvents its business, anticipating the needs of current and future markets. The Group innovates to enable progress, to achieve dynamic growth and a consistent performance. Air Liquide combines many products and technologies to develop valuable applications and services not only for its customers but also for society.