Centricut plasma torches and consumables for ESAB

Transcription

1 plasma torches and consumables for ESAB

2 Contents Plasma Product is available for the following major OEM brands AMADA ESAB Kaliburn KJELLBERG KOIKE KOMATSU LINCOLN THERMAL DYNAMICS WHITNEY WIEDEMANN HT, MAX, Hypertherm and are registered trademarks of Hypertherm, Inc. and may be registered in the United States and/or other countries. All other trademarks are the properties of their respective owners.

3 PT- /PT-XL OEM ESAB System PCM -VPi, PCM-SMi, PCM-00i, PCM-i, PCM 0A, PCM-87 and PCM- C-8 98 Tip, XL, 0 amp 0 C-8 88 Tip, 0 amp C Tip, XL, 0 amp L Tip, 0 amp C Tip, extended, 0 amp 0 C-8 08 Tip, extended, 0 amp 0 C- 0 Swirl baffle, XL, holes C Swirl baffle, holes C-8 98 Electrode, XL C-0 80 Electrode C-8 08 Electrode, extended 0 L Seat L-8 08 Heat shield, XL L PT-XL torch body, 7 L O-ring 070 N/A Lubricant. oz. (7 ml) tube is a registered trademark of Hypertherm, Inc. and may be registered in the United States and/or other countries. All other trademarks are the properties of their respective owners. is in no way affiliated with ESAB. Plasma

4 PT-7A /PT-7AM OEM esab System PCM -70, PCM-00 and PCM-0 L Shroud cap L-0 90 Shroud L Shield guard, drag L Shield guard C- 9 Heat shield L Heat shield, H.D. C-9 99 Tip,.07, 0 amp C-9 99 Tip,.0, 0 amp C-9 99 Tip,.0, 0 amp C Tip,.07, 80 amp C-0 00 Tip,.07, 00 amp L- 0 Tip, gouging, 70 amp L-7 07 Tip, gouging, 00 amp C Electrode C- 9 Baffle tube C-0 00 Electrode stem L PT-7/7A machine torch body, 80 L PT-7/7A torch body, N/A Lubricant. oz. (7 ml) tube is a registered trademark of Hypertherm, Inc. and may be registered in the United States and/or other countries. All other trademarks are the properties of their respective owners. is in no way affiliated with ESAB. Plasma

5 PT- /PT-M OEM esab System PCM L Heat shield, drag, 0 amp L-9 89 Heat shield, drag, 0 amp C- 999 Heat shield, machine L-8 78 Tip,.0 C-9 79 Tip,.07 0 C- 999 Tip,.0 0 C- 999 Tip,.0 0 C Electrode C Front body insert with o-ring L High current body insert with o-ring L-0 90 Baffle L-9 99 High current baffle 7 L Spacer C- 999 Gasket 7 8 L Collet, brass 9 L Torch cap L- 999 Center-adjust tool C O-ring 0 L PT- machine torch 070 N/A Lubricant. oz. (7 ml) tube is a registered trademark of Hypertherm, Inc. and may be registered in the United States and/or other countries. All other trademarks are the properties of their respective owners. is in no way affiliated with ESAB. 7 Plasma

6 PT-0AM OEM esab System PCM -00, PCM-87, PCM- and ESP-00i * * L9-7 7 Heat shield, 0 amp L9- Heat shield, amp C9-0* 0 Nozzle, 0 amp C9-9* 9 Nozzle, 70 amp C9-8* 8 Nozzle, 00 amp C9-0* 0 Electrode L9-7 7 Insulator L9-7 7 Baffle tube L9- Electrode holder assembly (includes L9-7) C9-7 7 Electrode seat L9-9 9 PT-0AM torch body assembly (includes L9-7 and L9-7) L O-ring 070 N/A Lubricant. oz. (7 ml) tube * part features a unique Hypertherm design that differs from the OEM design. is a registered trademark of Hypertherm, Inc. and may be registered in the United States and/or other countries. All other trademarks are the properties of their respective owners. is in no way affiliated with ESAB. 8 Plasma

7 8 7* 9 PT- OEM ESAB System Precision Plasmarc C70-* Shield, one piece with IHS tab C Shield retainer insulator with o-ring C70-9 N/A Shield without tab C Shield cup insulator C Nozzle retainer diffuser L Nozzle A, amp L70- Nozzle B, 0 amp C70- Nozzle C, 0 amp C70- Nozzle D, 70 amp C Nozzle E, 00 amp L Swirl baffle, amp L70- Swirl baffle, 0 amp C Swirl baffle, 0 00 amp 7 C70-09* 9 SilverLine electrode L O-ring L O-ring L70-W8 98W8 O-ring L70-W 8W O-ring 8 L Water baffle 9 L Torch body 070 N/A Lubricant. oz. (7 ml) tube L Tool, electrode and nozzle * part features a unique Hypertherm design that differs from the OEM design. * and SilverLine are registered trademarks of Hypertherm, Inc. and may be registered in the United States and/or other countries. All other trademarks are the properties of their respective owners. is in no way affiliated with ESAB. 9 Plasma

8 PT- /PT-XL Nitrogen OEM ESAB System PCM -8, ESP -00, ESP-00, ESP-00 and ESP * * C Nozzle retaining cap, bevel, PT-XL C Nozzle retaining cap, PT-XL C Nozzle retaining cap, PT- C0-9* 079 Nozzle assembly, N,., 0 amp C0-07 Nozzle assembly, N,., 00 amp C0-07 Nozzle assembly, N,., reverse swirl C0-07 Nozzle assembly, N,.00, 00 amp C0-07 Nozzle assembly, N,.00, reverse swirl C0-07 Nozzle assembly, N,.0, 70 amp C Nozzle assembly, N,.0, reverse swirl L Nozzle assembly, N,.0, amp C Nozzle, amp, PT-XL (use with C0- and C0-0) C0-8 N/A Nozzle base, amp, PT-XL C0-9 N/A Nozzle insulator, amp, PT-XL C Gas swirl baffle, ceramic, 8 x.07, 0 amp C0-98 Gas swirl baffle, ceramic, hole, amp C0-07 Gas swirl baffle, poly, hole C Gas swirl baffle, poly, reverse swirl, hole L Gas swirl baffle, 8 x.07, reverse, 0 amp C0-* 00 Electrode tip, N C0-07 Electrode tip holder, N C Contact ring assembly C PA bus insulator C Insulator body with o-ring, PT-XL 7 C0-99 Insulator body with o-ring, PT- 8 C Torch body, PT-XL C Torch body, PT- C Double threaded mounting tube C0-9 N/A O-ring kit, insulator body L Insulator, high current nozzle L Sleeve assembly, air curtain L High frequency connector L Electrode holder removal tool 070 N/A Lubricant. oz. (7 ml) tube * part features a unique Hypertherm design that differs from the OEM design. is a registered trademark of Hypertherm, Inc. and may be registered in the United States and/or other countries. All other trademarks are the properties of their respective owners. is in no way affiliated with ESAB. 0 Plasma

9 PT-XL Oxygen OEM Esab System PCM -8, ESP -00, ESP-00, ESP-00 and ESP-000 * * * C Nozzle retaining cap, bevel, PT-XL C Nozzle retaining cap, PT-XL C0-9 Nozzle, 00 amp, bevel C0-0 9 Nozzle, 00 amp, reverse bevel C Nozzle, amp, PT-XL (use with C0- and C0-0) C0-8 N/A Nozzle base, amp, PT-XL C0- N/A Nozzle base, O, 00 amp C0-9 N/A Nozzle insulator, amp, PT-XL C Nozzle, O, 0 amp C0-9 Nozzle, O, 00 amp C0- Nozzle, O, 00 amp (replaceable ceramic) C0- Nozzle, O, 0 0 amp C0- Nozzle, O, 0 0 amp, reverse C Nozzle, O,.099, 0 amp, reverse C0-0* 07 SilverLine electrode, 0 amp C7-09* 08 SilverLine electrode, 0 0 amp, bevel C0-0* SilverLine electrode, 00 0 amp C0-7* 07 Electrode, O C Electrode holder, O C Electrode holder 7 C Gas swirl baffle, ceramic, 8 x.07, 0 amp L Gas swirl baffle, 8 x.07, reverse, 0 amp C0-98 Gas swirl baffle, ceramic, hole, amp L7-98 Gas swirl baffle, x.0, reverse, amp C0-0 0 Gas swirl baffle, 8 hole, standard, amp L7- Gas swirl baffle, 8 x.07, reverse, 0 00 amp 8 C Contact ring assembly C PA bus insulator 9 C Insulator body with o-ring kit C0-99 Locating pin 0 C Torch body C0-9* Torch assembly, SilverLine, O, 0 amp (includes items 0) C0-9* Torch assembly, SilverLine, O, 00 amp (includes items 0) C Double threaded mounting tube C0-9 N/A O-ring kit, insulator body L Electrode holder removal tool C0-W99 8W99 O-ring, electrode holder C0-W8 8W8 O-ring, insulator body center C0-99 O-ring, insulator body small C O-ring, inside insulator body, front C O-ring, outside insulator body and torch C O-ring, insulator body rear edge, red L Pilot arc bus wire L High frequency connector L7- Air curtain sleeve L Electrode stem tool L Electrode removal tool L Power cable,. ft. 070 N/A Lubricant. oz. (7 ml) tube * part features a unique Hypertherm design that differs from the OEM design. and SilverLine are registered trademarks of Hypertherm, Inc. and may be registered in the United States and/or other countries. All other trademarks are the properties of their respective owners. is in no way affiliated with ESAB. Plasma

10 PT- /PT-XL Nozzle components OEM ESAB System PCM -8, ESP -00, ESP-00, ESP-00 and ESP-000 C Gasket C Insulator,.0 C Insulator,.80 C Insulator,. C Insulator,.0 C Spacer C Centering sleeve C Water swirl ring, standard C0-07 Water swirl ring, reverse C Nozzle base,. C Nozzle base,. C Nozzle base,.00 C Nozzle base,.0 is a registered trademark of Hypertherm, Inc. and may be registered in the United States and/or other countries. All other trademarks are the properties of their respective owners. is in no way affiliated with ESAB. Plasma

11 PT-9XL OEM ESAB System ESP -00/00/00/00C/000, PCM -0/00/8XL * 9* 0* L Nozzle retaining cap C Nozzle retaining cap L Heat shield, 0 amp C Heat shield, Std, 00 0 amp L Heat shield, heavy duty, 00 0 amp C7-0 0 Nozzle tip,.0, 0 amp C Nozzle tip,.07, 00 amp C Nozzle tip,.08, 0 amp C7-0 0 Nozzle tip,.09, 00 amp C7-9 0 Nozzle tip, 0 amp C Nozzle tip, 0 amp C Nozzle tip, 00 amp C7-8 8 Nozzle,.099, 0 amp C Nozzle,.0, 0 amp C7-9 9 Nozzle,.0, 00 amp C Nozzle base, 0 amp 7 C Nozzle base, amp 8 C7-98 N/A Nozzle base, extended life, amp 9 C7-09* 08 SilverLine electrode, 0 amp 0 C7-08* 88 SilverLine electrode, 0 amp C Electrode, CopperLine, 0 amp C Electrode holder C7-98 Gas swirl baffle, hole, standard, amp L7-98 Gas swirl baffle, hole, reverse, amp C Gas swirl baffle, 8 hole, standard, 0 amp C0-0 0 Gas swirl baffle, 8 hole, standard, amp L Gas swirl baffle, 8 hole, reverse, 0 amp C Contact ring assembly C PA bus insulator C7-0 Insulator assembly C7-9* 09 PT-9XL torch body C7-990* N/A Torch assembly, SilverLine, 0 amp C7-99* N/A Torch assembly, SilverLine, 0 amp C7-99* N/A Torch assembly, SilverLine, 0 amp L Electrode holder removal tool C-79 8W0 O-ring, rear insulator C0-W99 8W99 O-ring, electrode holder C O-ring, outside insulator body and torch C7-999 N/A O-ring kit, insulator body C O-ring, insulator body rear edge, red C7-W8 8W8 O-ring, insulator body center C7-99 O-ring, insulator body small C O-ring, inside insulator body C Double threaded mounting tube L7- Air curtain sleeve L High frequency connector L Power cable,. ft. L Electrode removal tool C7-00 8W89 O-ring, nozzle 070 N/A Lubricant. oz. (7 ml) tube PT-9XL+S 7 L Shield retainer assembly 8 L Shield, 0 amp 9 C Shield, 00 0 amp C7-9 9 Shield, amp 0 L Diffuser, 0 amp C7-9 9 Diffuser, amp L Nozzle retaining cup * part features a unique Hypertherm design that differs from the OEM design. 7, SilverLine and CopperLine are registered trademarks of Hypertherm, Inc. and may be registered in the United States and/or other countries. All other trademarks are the properties of their respective owners. is in no way affiliated with ESAB. Plasma

12 PT-9XLS OEM ESAB System ESP -00/00/00-00c/000, PCM -0/00/8XL C Shield retainer L Shield, 0 amp C Shield, 00 0 amp C7-9 9 Shield, 00 amp L Diffuser, 0 amp C7-9 9 Diffuser, amp C7-9 9 Diffuser, amp, reverse, black C Nozzle retaining cap L7-7 Nozzle retaining cap, air curtain 7 C Nozzle base, 0 amp 8 C Nozzle base, 00-0 amp 9 C7-98 N/A Nozzle base, extended life, amp 0 C7-0 0 Nozzle tip,.0, 0 amp C Nozzle tip,.07, 00 amp C Nozzle tip,.08, 0 amp C7-0 0 Nozzle tip,.09, 00 amp C7-9 0 Nozzle tip, 0 amp C Nozzle tip, 0 amp C Nozzle tip, 00 amp C7-8 8 Nozzle,.099, 0 amp C Nozzle,.0, 0 amp C7-9 9 Nozzle,.0, 00 amp L7-0 0 Nozzle, 00 amp C SilverLine electrode, 0 0 amp C SilverLine electrode, 0 amp C Electrode, CopperLine, 0 amp L7-9 9 Electrode, 00 amp L7-0 0 Electrode, N /ArH, 00 amp C7-98 Gas swirl baffle, hole, standard, amp L7-98 Gas swirl baffle, hole, reverse, amp C Gas swirl baffle, 8 hole, standard, 0 amp 7 C0-0 0 Gas swirl baffle, 8 hole, standard, amp L7-9 9 Gas swirl baffle, standard, 00 amp C-0R 08000R Gas swirl baffle, 8 x.07, reverse, 0 0 amp 8 C Screw, contact ring 9 C Contact ring assembly C O-ring, outside insulator body and torch C O-ring, insulator body rear edge, red 0 C Insulator body C7-900 N/A Insulating tube kit, PT-9XLS/PT-00 C Electrode holder C Torch body C7-99 N/A Torch assembly, SilverLine, 0 amp C7-99 N/A Torch assembly, SilverLine, 0 amp C Double threaded mounting tube C O-ring, Teflon tubes C0-W8 8W8 O-ring, insulator body center C O-ring, insulator body rear edge, red C7-998 N/A O-ring kit, insulator body C O-ring, insulator assembly C7-00 8W89 O-ring, nozzle L Electrode holder removal tool L High frequency connector C7-900 N/A Insulating tube kit, PT-9XLS/PT-00 L Locating pin L P.A. collet and wire assembly 070 N/A Lubricant. oz. (7 ml) tube, SliverLine and CopperLine are registered trademarks of Hypertherm, Inc. and may be registered in the United States and/or other countries. All other trademarks are the properties of their respective owners. is in no way affiliated with ESAB. Plasma

13 * * PT-00 OEM ESAB System ESP -00/00/00-00c/000, PCM -0/00/8XL C Shield retainer L Shield, 0 amp C Shield, 00 0 amp C7-9 9 Shield, 00 amp L Shield L Diffuser, 0 amp C7-9 9 Diffuser, amp C7-9 9 Diffuser, amp, reverse, black C Nozzle retaining cap L7-7 Nozzle retaining cap, air curtain 7 C Nozzle base, 0 amp 8 C Nozzle base, 00 0 amp 9 C7-98 N/A Nozzle base, extended life, amp 0 C7-0 0 Nozzle tip,.0, 0 amp C Nozzle tip,.07, 00 amp C Nozzle tip,.08, 0 amp C7-0 0 Nozzle tip,.09, 00 amp C7-9 0 Nozzle tip, 0 amp C Nozzle tip, 0 amp C Nozzle tip, 00 amp C Nozzle,.099, 0 amp C Nozzle,.0, 0 amp C Nozzle,.0, 00 amp L Nozzle, 00 amp C9-0* 0800 SilverLine electrode, 0 amp C9-0* 0800 SilverLine electrode, 0/00 amp L Electrode, N C Electrode holder C Gas swirl baffle, hole, standard, amp L Gas swirl baffle, hole, reverse, amp L7- Gas swirl baffle, 8 hole, reverse, 0 00 amp 7 C Gas swirl baffle, 8 hole, standard, amp L7-9 9 Gas swirl baffle, standard, 00 amp C-0R 08000R Gas swirl baffle, 8 x.07, reverse, 0 0 amp 8 C Screw, contact ring assembly 9 C Contact ring assembly C O-ring, outside insulator body and torch C7-998 N/A O-ring, kit, insulator body C Double threaded mounting tube 0 C Insulator body C7-900 N/A Insulating tube kit, PT-9XLS/PT-00 C Torch body, modular C Torch body C9-99* N/A Torch assembly, SilverLine, 0 amp C9-99* N/A Torch assembly, SilverLine, 0 amp L Electrode, holder, tool L Power cable,. ft. 070 N/A Lubricant. oz. (7 ml) tube * part features a unique Hypertherm design that differs from the OEM design. and SliverLine are registered trademarks of Hypertherm, Inc. and may be registered in the United States and/or other countries. All other trademarks are the properties of their respective owners. is in no way affiliated with ESAB. Plasma

14 XP for PT-00 and PT-9XLS OEM ESAB System ESP -00/00/00-00c/000, PCM -0/00/8XL C Shield retainer C0-90* N/A MultiPort shield, 00 C0-900 N/A MultiPort shield, 0 amp C0-9 N/A MultiPort shield, 0 amp C7-9 9 Diffuser, amp C Nozzle retaining cap C0-00 N/A CoolFlow nozzle tip, 00 amp C0-0 N/A CoolFlow nozzle tip, 0 amp C0-0 N/A CoolFlow nozzle tip, 0 amp C0-00* N/A CoolFlow nozzle kit, 00 amp, 0 pack C0-0* N/A CoolFlow nozzle kit, 0 amp, 0 pack C0-0* N/A CoolFlow nozzle kit, 0 amp, 0 pack C0-00* N/A CoolFlow nozzle base 7 C0-00* N/A Baffle, coolant 8 C0-00* N/A CoolFlow nozzle base assembly 9 C0-00* N/A SilverLine electrode 0 C Electrode holder C , 0 Gas swirl baffle, 8 hole, standard, amp C7-0800, 98 Gas swirl baffle, hole, amp 8* C Screw, contact ring assembly C Contact ring assembly C Insulator body C Torch body C Torch body modular C7-00 8W89 O-ring, nozzle C7-998 N/A O-ring, kit, insulator bod C0-0 N/A Wrench, elec/nozzle C0-0 N/A Wrench, nozzle base * part features a unique Hypertherm design that differs from the OEM design. Significantly improve: Consumable Life Cutting speed Cut quality and SliverLine are registered trademarks of Hypertherm, Inc. and may be registered in the United States and/or other countries. All other trademarks are the properties of their respective owners. is in no way affiliated with ESAB. Plasma

15 PT- OEM ESAB System ESP -00/00/00-00c/000, PCM -0/00/8XL * C Shield retainer L Shield retainer, insulated C Shield,. mm, amp C Shield,.0 mm, 0 amp C Shield,. mm, amp C Shield,. mm, 0 0 amp C Shield, 9.9 mm, 0 00 amp L Diffuser, 0 amp C7-9 9 Diffuser, amp C Nozzle retaining cap C Nozzle, CoolFlow,.8 mm, amp C Nozzle, CoolFlow,.0 mm, PR, amp C Nozzle, CoolFlow,.0 mm, 0 amp C Nozzle, CoolFlow,. mm, 00 amp C Nozzle, CoolFlow,.8 mm, 0 amp C Nozzle, CoolFlow,.0 mm, 00 amp C Nozzle, CoolFlow,. mm, 80 amp C Nozzle, CoolFlow,. mm, 00 amp C Nozzle, CoolFlow,.0 mm, 0 amp C Nozzle, CoolFlow,. mm, 0 amp C Nozzle, CoolFlow,. mm, 00 amp C Electrode, SilverLine, O, 0 amp 7 C Electrode, SilverLine, O, amp 8 C Electrode, SilverLine, O, 0 0 amp 9 C Electrode, SS/AL, 00 amp 0 C Electrode holder C Gas swirl baffle, X.0, 70 amp C Gas swirl baffle, X.0, amp C-0R 08000R Gas swirl baffle, 8X.07, reverse, 0 0 amp C Gas swirl baffle, 8X.07, amp C Screw, contact ring C Contact ring assembly C Double threaded mounting tube C Torch body New technology improvements! and SliverLine are registered trademarks of Hypertherm, Inc. and may be registered in the United States and/or other countries. All other trademarks are the properties of their respective owners. is in no way affiliated with ESAB. 7 Plasma

16 Technology products for ESAB, Kjellberg and Kaliburn Hypertherm, Inc. Hanover, NH 07 USA 0-- Tel Hypertherm (S) Pte Ltd. Singapore Tel Hypertherm (Shanghai) Trading Co., Ltd. PR China / Tel Hypertherm Europe B.V. 70 SE Roosendaal, Nederland 9907 Tel Hypertherm Brasil Ltda. Guarulhos, SP - Brasil 09 Tel Hypertherm and are registered trademarks of Hypertherm, Inc. and may be registered in the United States and/or other countries. All other trademarks are the properties of their respective owners. /0 Hypertherm, Inc. Rev