PGL7 LED Approvals: Fixture Catalog number: / / / Fixture Current Electrical Module Optional Features See page 2 See page 3-4 Specifications PGL7-LED 60 Light Emitting Diodes 65 System Watts for 350mA 84 System Watts for 450mA Maximum Weight = 19 lbs 18" DIA. (457 mm) Fixture with Standard Acrylic Refractor 10" DIA. (254 mm) 4" (102 mm) 7K" (191 mm) 3K" (89 mm) 4J" (108 mm) 8J" (210 mm) Fixture with Optional Balanced Pendant J-Box and Bird Shroud (PB2) 11L" (299 mm) ACRYLIC 11L" (299 mm) LEXAN Option Date: Page: 1 of 5 Speed Mount: Electro-zinc plated steel for mounting to standard 4 junction box or mud-box. Fixture hangs from hooks to free both hands to make field wire connections. Allows tool-free fixture mounting to junction box, with integral anti-theft lock. Electrical Housing: Die-cast, low copper (<0.6% Cu) aluminum alloy for direct mounting to the Kim Speed Mount. Wire entries are sealed by a silicone grommet. Refractor: Standard refractor is one-piece injection molded acrylic,.125 minimum wall thickness. The prisms around the perimeter refract the spill light off each PicoEmitter upward to eliminate the cave effect. Refractor attaches to electrical housing with (2) load bearing retainers. Perimeter is fully sealed with a one-piece extruded silicone gasket, with the ends fused together to form a continuous piece, sealing the refractor to the electrical housing, and providing an IP66 fixture rating. EmitterDeck : Precision injection molded optics are positioned to achieve directional control toward desired task. The entire assembly fastens to the housing as a one-piece module. Electronic Module: All electrical components are UL recognized and mounted directly to the electrical housing for maximum heat dissipation. Module includes a driver, thermal control device and surge protector. Driver is rated for -40 C operation. A step-down transformer within the housing may be used for 347V and 480V systems. All luminaires include an internal fuse. Finish: Standard finish on fixture electrical housing, optional PB2 and TB2, is (PS) Platinum Silver. Platinum Silver is Powdura TGIC powder coat paint. Listed to: UL 1598 Standard for Luminaires - UL 8750 Standard for Safety for Light Emitting Diode (LED) Equipment for use in Lighting Products and CSA C22.2#250.0 Luminaires. Warranty: Kim Lighting warrants PGL7 LED products ( Product(s) ) sold by Kim Lighting to be free from defects in material and workmanship for (i) a period of five (5) years for metal parts, (ii) a period of ten (10) years for exterior housing paint finish(s), (iii) a period of six (6) years for LED Light Engines (PicoEmitters) and, (iv) a period of five (5) years for LED power components (LED Driver, LifeShield device, Surge Protector), from the date of sale of such goods to the buyer as specified in Kim Lighting shipment documents for each product. CAUTION: Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious personal injury. Patent Pending KIM ING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.
Page: 2 of 5 Standard Features Fixture Cat. No. designates PGL fixture with Wide or Narrow optical distribution Wide = 70 Peak Intensity Angle Narrow = 57.5 Peak Intensity Angle Cat. Nos. for optical distributions PGL71 Type V Square PGL74 Type III Wide l PGL71W Narrow l PGL71N 71N l PGL74W 74W l PGL74N Electrical Module Light Emitting Diodes Cat. Nos. for Electrical Modules available: Exx 60L xk xxx 74N Current Exx Lamp Line Type Volts 60LxK xxx Current: l E35 = 350mA l E45 = 450mA Source: 60L=60 LEDs Color Temperature: l 2K = 580nm Amber l 3K = l 4K = 4200K l 5K = 5100K Voltage: l 120 = 120V l 208 = 208V l 240 = 240V l 277 = 277V l 347 = 347V 1 l 480 = 480V 1 1 Due to current unavailability of 347V and 480V drivers, specification of these voltages may feature an integral step-down transformer. 0-10V Dimming Interface Driver has a 0-10V dimming interface with a dimming range of 10-100%. Approved dimmers include Lutron Diva AVTV, Lutron Nova NFTV and NTFTV. Note: Not compatible with current sourcing dimmers. Fixture Housing Driver LifeShield 5V Dimming Lead (+) 40 ma Max Dimming Lead (-) Fixture Equivalent Circuit
Page: 3 of 5 Optional Features Finish Platinum Silver is Powdura TGIC powder coat paint. All other colors are TGIC powder coat paint. Color: Platinum Silver White Custom Color 1 (Standard) Cat. No.: l PS l WH l CC 1 Custom colors subject to additional charges, minimum quantities and extended lead times. Consult representative. Custom color description: Neighbor Friendly Optic: Cat. No. NFO No Option Polycarbonate Refractor Lens Cat. No. l LS Integrated Neighbor Friendly Optic on each PicoEmitter module to completely control unwanted backlight. Most effective with Type III. TYPE I TYPE II TYPE III Injection molded UV stabilized polycarbonate has the same prism design as the standard acrylic. The polycarbonate refractor lens decreases the luminaire efficiency, and has a different index of refraction than the acrylic material, as a result, moderately altering beam angles and candela. NOTE: Standard lens is acrylic. TYPE III - NFO Polycarbonate TYPE IV Forward Throw T Semi-Diffused Cat. No. ASOL Acrylic LSOL Polycarbonate No Option The semi-diffused refractor lens is a one-piece injection molded acrylic or polycarbonate lens,.125 minimum wall thickness. The lens option softens the light output and reduces glare from direct views of the optical system. The semi-diffused lens decreases the luminaire efficiency, and has a different index of refraction than the standard, clear acrylic or clear polycarbonate. As a result, moderately altering beam angles and candela. Semi-Diffused Fusing Cat. No. (see right) High temperature fuse holders factory installed inside the fixture housing. Fuse included. Line Volts: 120V 208V 240V 277V 347V 480V Cat. No.: l SF l DF l DF l SF l SF l DF Single Fuse Balanced Pendant J-Box and Bird Shroud Cat. No. l PB2PS Platinum Silver (Std PGL7 finish) Die-cast aluminum. Offset L" NPT pendant entry to balance fixture in free-swinging installation. Conduit pipe provided by others. The Kim Speed Mount is furnished for fixture attachment to the PB2. This option is shipped separate from fixture. Custom Color Balanced Pendant J-Box and Bird Shroud
Page: 4 of 5 Occupancy Sensors Smart Control Cat. No. l SCO l SCP The occupancy sensor device and aluminum enclosure is factory installed onto the electrical housing. SCO (On/Off control) - No light output when no motion detected. SCP (High/Low Control) User programmable settings of 70, 60, 50, 20% of power. Factory default is 50%. PGL7 driver is a 0-10V dimming interface. 5" (127mm) 3G" (87 mm) Limelight Parking Garage Control System Limelight Radio and Occupancy Sensor Module. Cat. No. l LLCM Specification: 120-277 VAC, RF ZigBee transceiver, and PIR sensor. Mounted to a cast aluminum bowl on the outside of the Parking Garage Luminaire to assure temperature sensitivity of electronic components is within specification. 5" (127mm) 3G" (87 mm) Limelight Ethernet Gateway Hardware. Cat. No. l LLGWT-03 Limelight Cellular Gateway Hardware. Cat. No. l LLGWT-04 High density RF Mesh coordinator, software proprietor, manifest holder of fixture ID s groupings and events. Tamper proof, NEMA 5-15 3 prong SJEOOW power cord, water tight Ethernet connections. Highly protected, long life AC/DC power supply. Single board, ARM compliant 520Mhz Intel computer, ZigBEE OEM RF coordinator. Limelight Cellular Gateway Hardware. High density RF Mesh coordinator, software proprietor, manifest holder of fixture ID s groupings and events. Tamper proof, NEMA 5-15 3 prong SJEOOW power cord. Highly protected, long life AC/DC power supply. Single board, ARM compliant 520Mhz Intel computer, ZigBEE OEM RF coordinator. Group Software and Commissioning for up to 100 Luminaires. Cat. No. l LLSC-100 Software and Commissioning for each luminaire over the 100 Unit threshold. Cat. No. l LLSC-1 Limelight Software and Commissioning. Limelight s exclusive system WEB software and Cloud Hosting Service. Graphic user interface includes facility layout and luminaire locations for remote diagnostic testing and customer/engineering interface on control plan. Commissioning includes the development of the initial lighting groups and event planning as well as the calibration of light harvesting schedules. A final commissioning report and user guide shall be provided. On-Site Commissioning Services provided for full functional prove-out of the enabled luminaires, mapping of all luminaires to custom graphic interface, occupancy sensor performance verification, and visual calibration of light harvesting events. Owner/Operator orientation and training with user guide. The first year of annual support is provided which includes 24/7 WEB access to Limelight tools www.limelighttools. com, cloud hosting, technical support, maintenance software updates, email alert notifications, and annual management reporting. Future annual support provided by Limelight under an annual fee contract.
Page: 5 of 5 Lumen Data Spectroradiometric Projected Lumen Maintenance 4200K 5100K Correlated Color Temp. CCT (K) 2800K-3175K 3800K-4600K 4600K-5600K Color Rendering Index (CRI) 75 70 65 ma 50,000 hrs 100,000 hrs 350 ma 96.74% 94.63% 450 ma 95.71% 92.62% Power Factor@ 120V >.90 >.90 >.90 Electrical Drive Current 350mA 450mA Volts - AC Amps - AC System Watts Amps - AC System Watts 120 0.54 65 0.70 84 208 0.31 65 0.40 84 240 0.27 65 0.35 84 277 0.23 65 0.30 84 347 0.19 65 0.24 84 480 0.14 65 0.18 84 B.U.G. RATING (TM15) in Lumens where B = Backlight, U = Uplight, G = Glare Temperature Driver Current(mA) PGL71W/A PGL71N/A PGL74W/A PGL74W/NFO/A PGL74N/A PGL74N/NFO/A B3 U2 G1 B3 U2 G1 B1 U2 G2 B1 U2 G1 B1 U2 G1 B1 U1 G1 4200K 350 B3 U2 G1 B3 U2 G1 B2 U2 G2 B1 U2 G2 B1 U2 G1 B1 U1 G1 5100K B3 U2 G2 B3 U2 G1 B2 U2 G2 B1 U2 G2 B1 U2 G1 B1 U1 G1 B3 U2 G1 B3 U2 G1 B2 U2 G2 B1 U2 G2 B1 U2 G1 B1 U1 G1 4200K 450 B3 U2 G2 B3 U2 G1 B2 U2 G2 B2 U2 G2 B2 U2 G2 B1 U1 G1 5100K B3 U2 G2 B3 U2 G1 B2 U2 G2 B2 U2 G2 B2 U2 G2 B1 U1 G1 Absolute Lumens Temperature Driver Current(mA) PGL71W/A PGL71N/A PGL74W/A PGL74W/NFO/A PGL74N/A PGL74N/NFO/A 5148 5526 5197 4273 5635 5030 4200K 350 6304 6740 6296 5212 6873 6134 5100K 6901 7271 6838 5623 7415 6618 5919 6333 5894 4935 6453 5778 4200K 450 7370 7886 7032 6145 8036 7195 5100K 7788 8333 7677 6493 8491 7603 LED performance and lumen output continues to improve at a rapid pace. Log onto www.kimlighting.com to download the most current photometric files from Kim Lighting s IES File Library.For custom optics and color temperature configurations, contact factory.