Model Number Structure

General-purpose Relay G2RS Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped with a coil-disconnection self-diagnostic function (LED type). High switching power (-pole: 0 A). Environment-friendly (Cd, Pb free). Wide range of Sockets also available. Model Number Structure LR Model Number Legend G2R - - - 2 3 4 6. Relay Function Blank: General-purpose 2. Number of Poles : pole 2: 2 poles 3. Contact Form Blank: SPDT 4. Contact Type Blank: Single Ordering Information. Terminals S: Plug-in 6. Classification Blank: General-purpose N: LED indicator D: Diode ND: LED indicator and diode NI: LED indicator with test button NDI: LED indicator and diode with test button. Rated Coil Voltage List of Models Classification Enclosure Coil ratings Contact form rating SPDT DPDT Plug-in terminal General-purpose Unsealed AC/DC G2R--S G2R-2-S LED indicator G2R--SN G2R-2-SN LED indicator with test button G2R--SNI G2R-2-SNI Diode DC G2R--SD G2R-2-SD LED indicator and diode G2R--SND G2R-2-SND LED indicator and diode with test button G2R--SNDI G2R-2-SNDI Note: When ordering, add the rated coil voltage and "(S)" to the model number. Rated coil voltages are given in the coil ratings table. Example: G2R--S 2 VDC (S) New model Rated coil voltage General-purpose Relay G2RS

Accessories (Order Separately) Connecting Sockets Applicable Relay model Track/surface-mounting Socket Back-mounting Socket pole G2R--S(N)(D)(ND)(NI)(NDI) 2 poles G2R-2-S(N)(D)(ND)(NI)(NDI) Note: Use of the P2CM Clip & Release Lever is recommended to ensure stable mounting. Accessories for Terminal Socket (Option) Mounting Tracks *Used to mount several P2R-0A and P2R-0A Connecting Sockets side by side. Specifications Coil Ratings Rise-up terminal P2RF-0-ESS (See note.) + (P2CM-ESS (option)) P2RF-0-ESS (See note.) + (P2CM-ESS (option)) Rise-up terminal (P2RF-0-ESS, P2RF-0-ESS) Screwless clamp terminal P2RF-0S (See note.) + (P2CM-S (option)) P2RF-0S (See note.) + (P2CM-S (option)) Screw terminal P2RF-0-E P2RF-0 P2RF-0-E P2RF-0 Screwless clamp terminal (P2RF-0S, P2RF-0S) Clip & Release Lever P2CM-ESS (pcs= bag of 0 pcs) P2CM-S Socket Bridge ---- P2RM-SR (for AC), P2RM-SB (for DC) Nameplate PYC-TR R99- Nameplate for MY * The rated current and coil resistance are measured at a coil temperature of 23 C with tolerances of ±0%. Terminals PCB terminals Solder terminals PCB terminals Solder terminals Applicable Socket Description Model Track-connecting Socket Mounting track 0 cm (l) x.3 mm (t): PFP-0N m (l) x.3 mm (t): PFP-00N m (l) x 6 mm (t): PFP-00N2 End plate PFP-M Spacer PFP-S Back-connecting Socket Mounting plate P2R-P* Rated voltage Rated current* Coil resistance* 0 Hz 60 Hz Armature OFF Coil inductance (H) (ref. value) Armature ON Must operate voltage Must release voltage % of rated voltage Max. voltage Model P2R-0P, P2R-0P P2R-0A P2R-0P, P2R-0P P2R-0A Power consumption (approx.) AC 24 V 43. ma 3.4 ma 23 Ω 0.. 0% max. 30% max. 0% 0.9 VA at 60 Hz 0 V 9. ma.2 ma,66 Ω 3.33 26.3 20 V.6 ma. ma,26 Ω 6.3 32.46 230 V 4.4 ma 3. ma 2,2 Ω 2.6 43.90 240 V 3. ma 3.2 ma 30,360 Ω 90. 2.34 Rated voltage Rated current* Coil resistance* Coil inductance (H) (ref. value) Armature OFF Armature ON Must operate voltage Must release voltage % of rated voltage Max. voltage DC 6 V.0 ma 69 Ω 0.2 0.4 0% max. % min. 0% 0.3 W 2 V 43.2 ma 2 Ω 0.9 2.3 24 V 2.6 ma,3 Ω 3.60.2 4 V.4 ma 4,220 Ω.2 29.2 Power consumption (approx.) 2 General-purpose Relay G2RS

Contact Ratings Number of poles pole 2 poles Load Resistive load Inductive load Resistive load (cosφ = ) (cosφ = 0.4; L/R = ms) (cosφ = ) Rated load Note: P level: λ 60 = 0. x 0-6 /operation Characteristics Note: Values in the above table are the initial values. *4,000 VAC, 0/60 Hz for minute when the P2R-0A or P2R-0A Socket is mounted. Approved Standards UL 0 (File No. E4643) 0 A at 20 VAC; 0 A at 30 VDC. A at 20 VAC; A at 30 VDC A at 20 VAC; A at 30 VDC Rated carry current 0 A A Max. switching voltage 440 VAC, 2 VDC 30 VAC, 2 VDC Max. switching current 0 A A Max. switching power 2,00 VA, 300 W, VA, 0 W,20 VA, 0 W Failure rate (reference value) 00 ma at VDC 0 ma at VDC Item pole 2 poles Contact resistance 00 mω max. Operate (set) time ms max. Release (reset) time AC: 0 ms max.; DC: ms max. (w/built-in diode: 20 ms max.) AC: ms max.; DC: 0 ms max. (w/built-in diode: 20 ms max.) Max. operating Mechanical:,000 operations/hr frequency Electrical:,00 operations/hr (under rated load) Insulation resistance,000 MΩ min. (at 00 VDC) Dielectric strength,000 VAC, 0/60 Hz for min between coil and contacts*;,000 VAC, 0/60 Hz for min between contacts of same polarity IEC/VDE (EN60) Inductive load (cosφ = 0.4; L/R = ms) 2 A at 20 VAC; 3 A at 30 VDC 00 VA, 90 W,000 VAC, 0/60 Hz for min between coil and contacts*; 3,000 VAC, 0/60 Hz for min between contacts of different polarity,000 VAC, 0/60 Hz for min between contacts of same polarity Vibration resistance Destruction: 0 to to 0 Hz, 0. mm single amplitude (. mm double amplitude) Malfunction: 0 to to 0 Hz, 0. mm single amplitude (. mm double amplitude) Shock resistance Destruction:,000 m/s 2 Malfunction: 200 m/s 2 when energized; 00 m/s 2 when not energized Endurance Mechanical: AC coil: 0,000,000 operations min.; DC coil: 20,000,000 operations min. (at,000 operations/hr) Electrical: 00,000 operations min. (at,00 operations/hr under rated load) (DC coil type) Ambient temperature Operating: 40 C to 0 C (with no icing or condensation) Ambient humidity Operating: % to % Weight Approx. 2 g Model Contact form G2R--S SPDT to 0 VDC to 240 VAC CSA 22.2 No.0, No.4 (File No. LR392) Coil ratings Contact ratings Operations 0 A, 30 VDC (resistive) 0 A, 20 VAC (general use) TV-3 (NO contact only) G2R-2-S DPDT A, 30 VDC (resistive) A, 20 VAC (general use) TV-3 (NO contact only) Model Contact form G2R--S SPDT to 0 VDC to 240 VAC 6 x 0 3 6 x 0 3 Coil ratings Contact ratings Operations 0 A, 30 VDC (resistive) 0 A, 20 VAC (general use) TV-3 (NO contact only) G2R-2-S DPDT A, 30 VDC (resistive) A, 20 VAC (general use) TV-3 (NO contact only) 6 x 0 3 6 x 0 3 Contact form pole 6, 2, 24, 4 VDC 24, 0, 20, 230, 240 VAC 2 poles 6, 2, 24, 4 VDC 24, 0, 20, 230, 240 VAC LR Number of poles pole to 0 VDC to 240 VDC 2 poles to 0 VDC to 240 VDC Coil ratings Contact ratings Operations A, 440 VAC (cosφ =.0) 0 A, 20 VAC (cosφ =.0) 0 A, 30 VDC (0 ms) A, 20 VAC (cosφ =.0) A, 30 VDC (0 ms) 00 x 0 3 00 x 0 3 Coil ratings Contact ratings Operations 0 A, 20 VAC (general use). A, 20 VAC (PF0.4) 0 A, 30 VDC (resistive) A, 30VDC (L/R=ms) A, 20 VAC (general use) 2 A, 20 VAC (PF0.4) A, 30 VDC (resistive) 3A, 30VDC (L/R=ms) 00 x 0 3 00 x 0 3 General-purpose Relay G2RS 3

Engineering Data Maximum Switching Power Plug-in Relays G2R--S 00 G2R-2-S 00 Switching current (A) 0 AC inductive load (cosφ = 0.4) DC resistive load DC inductive load (L/R = ms) AC resistive load Switching current (A) 0 AC inductive load (cosφ = 0.4) DC resistive load DC inductive load (L/R = ms) AC resistive load 0. 0 00 000 Endurance Switching voltage (V) 0. 0 00 000 Switching voltage (V) Plug-in Relays Endurance (x0 3 operations) G2R--S,000,000 00 00 0 20-VAC/30-VDC resistive load 20-VAC inductive load (cosφ = 0.4) 30-VDC inductive load (L/R = ms) Endurance (x0 3 operations) 0,000,000,000 G2R-2-S 00 00 0 20-VAC inductive load (cosφ = 0.4) 30-VDC inductive load (L/R = ms) 20-VAC/30-VDC resistive load Switching current (A) Switching current (A) Ambient Temperature vs Maximum Coil Voltage Maximum voltage (%) AC coil DC coil Note: The maximum voltage refers to the maximum value in a varying range of operating power voltage, not a continuous voltage. Ambient temperature ( C) 4 General-purpose Relay G2RS

Technical and Environmental Properties Properties -Pole and 2 Pole Model Tracking Resistance Base 20 Environmental Protection RT Flammability Class Base, Insulator, Spool Case, Indicator, UL 94V-0 UL 94V-2 Pushbutton Pollution degree 2 Creepage Distance mm Clearance Distance mm Contact Material AgSnIn Typical information for reference only The following data is provided as experimental and/or calculated data for reference only. These fall under the category of typical behaviour and the operation of individual relays will vary according to the exact operating conditions Typical Operate / Release times pole model 2 pole model AC Type (operate / release time) 6 / ms 6 / 0 ms DC Type (operate / release time) 2 / 4 ms / ms Multiple Contact DC Switching Capacity Switching capacity of DC resistive load 0 Switching Current (A) G2R-2-S 2 contacts in series G2R-S 0. 20 40 60 0 00 20 40 60 0 200 220 Switching Voltage (Vdc) Load Reduction Factor 0. Switching Current (A) 0.6 0.4 0. 0.6 0.4 0.2 Cos(p.f.) For AC inductive loads (such as solenoids, contactor coils, etc.) the reduction factor corresponding to cos(p.f.) (cosine of power factor) is multiplied by the rated current in order to identify the maximum allowable current. This approximation is not valid for loads with high inrush currents such as electric motors or fluorescent lamps. General-purpose Relay G2RS

Dimensions Note: All units are in millimeters unless otherwise indicated. Relays with Plug-in Terminals SPDT Relays G2R--S, G2R--SN, G2R--SNI G2R--SD, G2R--SND, G2R--SNDI /Internal Connections (Bottom View) G2R--S G2R--SD (DC) 29 max. 3 max. 2 4 3 2 4 3 20 3. max. G2R--SN, G2R--SNI (AC) G2R--SN, G2R--SNI (DC) DC24V 0. 4. 2 4 3 2 4 3.2.2. G2R--SND, G2R--SNDI (DC). 2 4 3 DPDT Relays G2R-2-S, G2R-2-SN, G2R-2-SNI G2R-2-SD, G2R-2-SND, G2R-2-SNDI /Internal Connections (Bottom View) G2R-2-S G2R-2-SD (DC) 29 max. 3 max. 2 3 4 2 3 4 6 6 20 3. max. G2R-2-SN, G2R-2-SNI (AC) G2R-2-SN, G2R-2-SNI (DC) 2 3 4 2 3 4 0. 2. 2.4 6.2 6 6.4.9 G2R-2-SND, G2R-2-SNDI (DC) 9.4 2 3 4 6 6 General-purpose Relay G2RS

Track/Surface Mounting Sockets P2RF-0-ESS 42. 6 34..6 24 4. 2 3..6 3.2 dia..2.2 20.6 6 dia. 3 9.2 Standard model Option (with Clip and Release Lever) A A2.6 24 P2RF-0-ESS 6 42. 3..6 24 2 3.. 24 4 22 2.6 3.2 dia. 20.6 6 dia. 3 9.2 Standard model Option (with Clip and Release Lever) A A2.6 24 Accessories for P2RF-@-ESS Clip and Release Lever P2CM-ESS 4..6.4 2. 3. 4. 9. 2. 34.4 3.2. 22.9 General-purpose Relay G2RS

P2RF-0-S 3.2 max. 36. max. 32.6 2.6 22.6 4 2 24. Standard model Option (with ejector and label attached) 92.0 max. 3.4 A A2.0 max. 2. 32.6 (.3) P2RF-0-S 3.2 max. 36. max. 2 32.6 2.6 22.6 (3.4) 24 4 22 2 92.0 max. 24. 3.4 A A2 Standard model Option (with ejector and label attached).0 max. 2.6 32.6 (.3) Accessories for P2RF-@-S Socket Bridge Insulating coating Clip and Release Lever 9 4 L.2 dia. conductor (See note.) 6. 40.3 36 General-purpose Relay G2RS

P2RF-0-E Five, M3. 4 max. 2 (for Surface Mounting). max. 6.0 max. 3.-dia. hole. 6 max. 3. 39. 4 () 2 (4) 3 (2) (A) (A2) M3 or 3.-dia. hole 3.2-dia. hole 39.±0. Note: Pin numbers in parentheses apply to DIN standard. P2RF-0-E. max. 2. Eight, M3 2 4.0 max. 3 3. 39. (2) (22) (24) 6 3 2 4 () (2) (4) (for Surface Mounting) 3.2-dia. hole 39.±0. 6.0 max. 3.-dia. hole. 6.0 max. (A) (A2) M3 or 3.-dia. hole P2RF-0 Five, M3. x 2 4-dia. holes (for Surface Mounting) 4.2-dia. hole. max. 3. 30±0.0 4 9. max. 9. 30 max. 4 max. M3 or 3.2-dia. hole P2RF-0 Eight, M3. x 2 4-dia. holes (for Surface Mounting) 4.2-dia. hole. max. 3. 30±0.0 4 9. max. 9. 30 max. 4 max. M3 or 3.2-dia. hole General-purpose Relay G2RS 9

Mounting Height of Relay with Track/Surface Mounting Sockets P2RF-@ P2RF-@-E 66. 62.0 6.0 0. P2RF-@-S P2RF-@-ESS 2.0 6.0 0.6 4.6 2.6 (.30) Back-connecting Sockets P2R-0P (-pole) 4 6 4..2 4 3. 4. max. 3. max. (Bottom View) 6 4. Tolerance: ±0. 4 Five,.6-dia. holes. 4 4 () P2R-0P (2-pole) 36. max. 0.3 4 4. max. (Bottom View). Eight,.3-dia. holes 20 3. max. 2. 20.. (4.3) Terminal plate thickness: 0.3 36. max. 0 General-purpose Relay G2RS

P2R-0A (-pole) 0.3.2 4. max. 6. 3. 6. 3. max. (Bottom View) Five, 3 x.-dia. holes 6 Panel Cutout 3.6±0. Terminal plate thickness: 0.3 36. max. P2R-0A (2-pole) 0.3.2 4. max. 30.±0.2 20 2.6 3. max. Recommended thickness of the panel is.6 to 2.0 mm 2.. Eight, 3 x.2-dia. holes. Terminal plate thickness: 0.3 36. max. P2R-0P 0. 4 max.. 6.4 0.4 (Bottom View) 4±0. Five,.6-dia. holes 3 max. 29.6 6±0. 4.±0. ±0...4 4±0. ±0. 4 max. P2R-0P 4 max.. 6.4 0.4 (Bottom View). Eight,.3-dia. holes 3 max. 29. 20.9.4 (.) 4 max. Mounting Height of Relay with Back-connecting Sockets G2R-@P G2R-@A G2R-@P G2R Relay G2R Relay 44. P2R-_P Socket 3.0 P2R-_A Socket 4. General-purpose Relay G2RS

Mounting Tracks PFP-00N, PFP-0N PFP-00N2 4..3±0. 3±0.3 2±0. 4. 3±0.3 2 24 6 29.2 2 2 2 2 0 0,000 (00) () 2 2 2 2 0 0,000. It is recommended to use a panel.6 to 2.0 mm thick. End Plate Spacer PFP-M 0 6.2. PFP-S 6 2 0 3. 3.3. 44.3 34.. 0 M4 x pan head screw.3 4. 6. Precautions!Caution Do not use the test button for any purpose other than testing. Be sure not to touch the test button accidentally as this will turn the contacts ON. Before using the test button, confirm that circuits, the load, and any other connected item will operate safely.!caution Check that the test button is released before turning ON relay circuits.!caution If the test button is pulled out too forcefully, it may bypass the momentary testing position and go straight into the locked position.!caution Use an insulated tool when you operate the test button. Precautions for P2RF-@-S Connection Do not move the screwdriver up, down, or from side to side while it is inserted in the hole. Doing so may cause damage to internal components (e.g., deformation of the clamp spring or cracks in the housing) or cause deterioration of insulation. Do not insert the screwdriver at an angle. Doing so may break the side of the socket and result in a short-circuit. 2 General-purpose Relay G2RS

General-purpose Relay G2RS 3

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.0393. To convert grams into ounces, multiply by 0.032. Cat. No. J40-E2-02 In the interest of product improvement, specifications are subject to change without notice. 4 General-purpose Relay G2RS