ABLOY EXIT. Functional and technical descriptions Single and double leaf doors. An ASSA ABLOY Group brand

SSFN 014/2 2 ABLOY EXIT Functional and technical descriptions Single and double leaf doors An ASSA ABLOY Group brand

ABLOY EXIT - EXIT PRODUCTS It is time to take the exit safety standards to a new level. Abloy EXIT product features ABLOY EXIT products are used in exit doors which are in passage or in entrances. ABLOY EXIT product range meets the requirements of the European and EN 1125 standards. Door environment safety is often perceived as the possibility to lock the doors and restrict entrance. Personal safety includes also the possibility to exit, and for that end, there must be a safe exit for all situations in the building. The exit routes must be clear, accessible and safe for large groups of people, too. ABLOY - PRODUCTS ABLOY - expertise AND consulting MATERIALS The lock case and bolt are made of steel (Fe). The cylinder housing and plug are made of brass. Handle material according to the architectural hardware range. Panic bar arms are made of aluminium, the horizontal bar is made of stainless steel and the mounting plates are made of brass. ABLOY - AUTHORISED LOCKSMITH: maintenance and installation service ABLOY ABLOY ACADEMY training offers SURFACE FINISHES The lock case is zinc plated steel (Fe/ZL) or chromed (CR). Cylinder housing and plug: chromed (CR), satin chromed (HCR), polished brass (Ms/Ki), brushed nickel (HN), brushed brass (M). Handle finishes according to the architectural hardware range. HANDING OF THE DOOR, OR DETERMINING THE SWING DIRECTION ABLOY EXIT solution combines solid product know-how and extensive expertise in the field of personal safety. The solution is built on tested and certified ABLOY EXIT products, complying with the latest lock industry standards. Exit safety is defined in standards and EN 1125 according to which individual exit products should be tested a complete unit operating in the door environment. Besides certified products, we provide you with top industry experts and comprehensive training. We offer designing background information for experts in various fields and solutions to support decision making. We train our distribution channel network continuously to ensure that you have the top industry expertise at your service. 1 Right inwards (Left handed lock case) 2 Left inwards (Right handed lock case) By selecting Abloy, you can rely on a nationwide network of ABLOY -authorised locksmiths. This means that you have a professional product installation and maintenance service, original ABLOY products and our extensive guarantee at your disposal. 3 Left outwards (Left handed lock case) 4 Right outwards (Right handed lock case) 2 3

table of contents DOUBLE LEAF ACTIVE DOOR - WOODEN/metal door MOTOR lock cases Push/pull function motor lock cases PE592 Product information...32 Product examples...33 GENERAL INFORMATION CONCEPTUAL FIGURES: double leaf door SINGLE LEAF ACTIVE DOOR - WOODEN/METAL DOOR MECHANICAL LOCK CASES Handle controlled lock case LE10 Product information... Product examples...9 Push/pull function lock case LE14 Product information...10 Product examples...11 Push/pull function lock case LE15 Product information...12 Product examples...13 DOUBLE LEAF ACTIVE DOOR - WOODEN/METAL DOOR MECHANICAL LOCK CASES Handle controlled lock case LE11 Product information...14 Product examples...15 Push/pull function lock case LE13 Product information...16 Product cexamples...17 Push/pull function lock case LE16 Product information...1 Product examples...19 SINGLE AND DOUBLE LEAF ACTIVE DOOR - Narrow stile door mechanical lock cases Handle controlled lock case LE310 Product information...20 Product examples...21 Push/pull function lock case LE314 Product information...22 Product examples...23 Push/pull function lock case LE315 Product information...24 Product examples...25 SINGLE LEAF ACTIVE DOOR - WOODEN/metal door SOLENOID lock cases Handle controlled solenoid lock cases EL51, PE50 Product information...26 Product examples...27 DOUBLE LEAF ACTIVE DOOR - WOODEN/metal door SOLENOID lock cases Handle controlled solenoid lock cases EL50 Product information...2 Product examples...29 SINGLE LEAF ACTIVE DOOR - WOODEN/metal door MOTOR lock cases Push/pull function motor lock cases EL593, PE590 Product information...30 Product examples...31 SINGLE LEAF ACTIVE DOOR - WOODEN/metal door SOLENOID lock cases Push/pull function solenoid lock cases EL502 Product information...34 Product examples...35 SINGLE AND DOUBLE LEAF ACTIVE DOOR - NARROW STILE door SOLENOID lock cases Handle controlled solenoid lock cases EL40 Product information...36 Product examples...37 SINGLE AND DOUBLE LEAF ACTIVE DOOR - narrow stile door MOTOR lock cases Push/pull function motor lock cases EL490 Product information...3 Product examples...39 SINGLE LEAF ACTIVE DOOR - narrow stile door SOLENOID lock cases Push/pull function solenoid lock cases EL402 Product information...40 Product examples...41 PASSIVE WOODEN/METAL DOOR Handle controlled mechanical passive wooden/metal door Product information...42 Product examples (active door, mechanical)...43 Product examples (active door, electromechanical EL50 or PE592)...43 Passive wooden/metal door with swing door automatics Product information...44 Product examples (active door, electromechanical PE592)...45 PASSIVE NARROW STILE DOOR Handle controlled mechanical passive narrow stile door Product information...46 Product examples (active door, mechanical)...47 Product examples (active door, electromechanical EL40 or EL490)...47 Passive narrow stile door with swing door automatics Product information...4 Product examples (active door, electromechanical EL490)...49 STRIKER PLATES 50 ABLOY EXIT: DIMENSIONAL PRODUCT DRAWINGS - HANDLES 52 ABLOY EXIT: DIMENSIONAL PRODUCT DRAWINGS - PANIC BARS AND CYLINDER-PUSH PAD 5 DIMENSIONAL CYLINDER DRAWINGS ABLOY EXIT: dimensional passive door product drawings 60 ELECTRIC LOCK ACCESSORIES 62 ABLOY EXIT: MAINTENANCE, TESTING AND INSTALLATION OF PRODUCTS 65 ABLOY EXIT: PRODUCT SELECTION CHART 66 4 5

ABLOY EXIT: Product code symbols Double leaf door conceptual figure FIRE Product code hardware solution that fulfils requirements for fire rated door, i.e., the bolt is thrown when the door is closed. Product code hardware solution that meets the requirements of the European standard. ACTIVE DOOR PASSIVE DOOR Onefit The product code lock case belongs to the one-sized lock case range. EN 1125 Product code hardware solution that meets the requirements of the European EN 1125 standard. TOP LOCK The lock case meets the requirements of the European exit product standards and EN 1125, as well as the lock case standard EN 12209 and EN1446. ABLOY EXIT: Features common to the solution LOCK CASE *) PANIC BAR CENTRE LOCK PANIC BAR **) MECHANICAL DURABILITY Tested up to 200,000 cycles. Product code hardware solution that fulfils requirements for exit door. 200 000 EXIT NaCl CORROSION RESISTANCE AND ENVIRONMENTAL CONDITIONS Tested for demanding environments. CE MARKING The product meets the safety, environment and consumer protection requirements set by the European Union. BOTTOM LATCH *) WITH DOUBLE LEAF DOORS, STRIKER PLATE IS NOT REQUIRED FOR ACTIVE DOOR LOCK CASES **) PANIC BAR, PUSH PAD OR HANDLE 6 7

active door Application HANDLE CONTROLLED LOCK CASE LE10 FOR SINGLE LEAF WOODEN/METAL DOOR The handle controlled exit lock case ABLOY LE10 is recommended to be used in exit doors. - EMERGENCY EXIT EXIT BY HANDLE EN 1125 - PANIC EXIT EXIT BY PANIC BAR LOCKS FOR EXIT DOOR SOLUTIONS - lock case LE10 - ABLOY EXIT -handle set for wooden/metal door EN 1125 - lock case LE10 - ABLOY EXIT panic bar PBE001 - wooden/metal door outside single handle from - ABLOY product range active door Door operation Handle controlled ABLOY EXIT lock case with automatic deadlocking latch bolt. The lock can always be opened from the inside by handle or panic bar. Suitable for fire rated doors. Onefit FIRE In the locked position, the lock can be opened from the outside by key and handle, from the inside always by handle. In the open position, the lock can be opened from either side by handle. Onefit EN 1125 FIRE In the locked position, the lock can be opened from the outside by key and handle, from the inside always by panic bar. In the open position, the lock can be opened from the outside by handle and from the inside by panic bar. Lock case functions can be selected with the forend snib. To use the snib, the key must be turned in the cylinder. UPPER SNIB POSITION = Deadlocking (locked position), bolt out 17 mm The lock can be opened from the outside by key only (from the cylinder), and from the inside anytime by handle or panic bar. LOWER SNIB POSITION = Day use (open position), bolt out 14 mm The lock can be opened from the outside by handle, and from the inside anytime by handle or panic bar. LE10X is the microswitch version of the lock. Striker plates Adjustable striker plates LP711, LP714, LP721, LP731 Metal door striker plates EA307, EA30, 4613, 4614 9

active door Application PUSH/PULL FUNCTION LOCK CASE LE14 FOR SINGLE LEAF WOODEN/METAL DOOR The push/pull function exit door lock case ABLOY LE14 is recommended to be used in exit or emergency exit doors which are in passage or in entrances. - EMERGENCY EXIT EXIT BY HANDLE EN 1125 - PANIC EXIT EXIT BY PANIC BAR - lock case LE14 - ABLOY EXIT single handle for wooden/metal door - door pull from ABLOY product range Onefit LOCKS FOR EXIT DOOR SOLUTIONS FIRE EN 1125 - lock case LE14 - ABLOY EXIT panic bar PBE002 - door pull from ABLOY product range Onefit EN 1125 FIRE active door Door operation Push/pull function ABLOY EXIT lock case with automatic deadlocking latch bolt. The lock can always be opened from the inside by handle or panic bar. Suitable for fire rated doors. The lock is deadlocked (locked position) always when the door is closed. LE14X is the microswitch version of the lock. From the outside, the lock can be opened by key and door pull, from the inside always by handle. From the outside, the lock can be opened by key and door pull, from the inside always by panic bar. Striker plates Adjustable striker plates LP711, LP714, LP721, LP731 Metal door striker plates EA307, EA30, 4613, 4614 LOCKS FOR EMERGENCY EXIT DOOR SOLUTIONS - lock case LE14 - double cylinder CY002 - ABLOY EXIT single handle for wooden/ metal door - ABLOY EXIT seal EH900 - door pull from ABLOY product range - lock case LE14 - inside cylinder CY021 - ABLOY EXIT single handle for wooden/metal door - ABLOY EXIT seal EH900 Onefit FIRE Onefit FIRE The lock can be opened from the outside by key and door pull, from the inside by key. In an emergency situation, the lock can always be opened from the inside by handle after breaking the seal. The lock can be opened from the inside by key.in an emergency situation, the lock can always be opened from the inside by handle after breaking the seal. 10 11

active door Application PUSH/PULL FUNCTION LOCK CASE LE15 FOR SINGLE LEAF WOODEN/METAL DOOR The push/pull function exit door lock case ABLOY LE15 is recommended to be used in exit doors which are in passage or in entrances. - EMERGENCY EXIT EXIT BY HANDLE LOCKS FOR EXIT DOOR SOLUTIONS - lock case LE15 - ABLOY EXIT single handle for wooden/ metal door - door pull from ABLOY product range EN 1125 - lock case LE15 - ABLOY EXIT panic bar PBE002 - door pull from ABLOY product range active door EN 1125 - PANIC EXIT EXIT BY PANIC BAR Onefit Onefit EN 1125 Door operation Push/pull function ABLOY EXIT lock case with automatic deadlocking. The lock can always be opened from the inside by handle or panic bar. Not suitable for fire rated doors. In the locked position, the lock can be opened from the outside by key and door pull, from the inside always by handle. In the open position, the lock can be opened from the outside by door pull and from the inside by handle. In the locked position, the lock can be opened from the outside by key and door pull, from the inside always by panic bar. In the open position, the lock can be opened from the outside by door pull and from the inside by panic bar. Lock case functions can be selected with the forend snib. To use the snib, the key must be turned in the cylinder. UPPER SNIB POSITION = Deadlocking (locked position), bolt out 17 mm The lock can be opened from the outside by key only (from the cylinder) and from the inside anytime by handle or panic bar. LOWER SNIB POSITION = Day use (open position), the bolt is locked inside the lock case, and the lock can be opened from the outside by door pull and from the inside anytime by handle or panic bar. LE15X is the microswitch version of the lock. Striker plates Adjustable striker plates LP711, LP714, LP721, LP731 Metal door striker plates EA307, EA30, 4613, 4614 12 13

active door HANDLE CONTROLLED LOCK CASE LE11 FOR DOUBLE LEAF WOODEN/METAL DOOR OPTIONS FOR PASSIVE DOOR LEAF PRODUCTS WITH THE LOCK CASE ACTIVE DOOR PASSIVE DOOR PRODUCT CODE Mechanical locking Mechanical locking PE911 LOCKS FOR EXIT DOOR SOLUTIONS - lock case LE11 - ABLOY EXIT handle set for wooden/ metal door EN 1125 - lock case LE11 - ABLOY EXIT panic bar PBE001 - wooden/metal door outside single handle from ABLOY product range active door Application The handle controlled exit lock case ABLOY LE11 is recommended to be used in exit doors which are in passage or in entrances. - EMERGENCY EXIT EXIT BY HANDLE EN 1125 - PANIC EXIT EXIT BY PANIC BAR 51 1 Onefit FIRE In the locked position, the lock can be opened from the outside by key and handle, from the inside always by handle. In the open position, the lock can be opened from either side by handle. Onefit EN 1125 FIRE In the locked position, the lock can be opened from the outside by key and handle, from the inside always by panic bar. In the open position, the lock can be opened from the outside by handle and from the inside by panic bar. Suitable for fire rated doors. 22 LE11x is the microswitch version of the lock. 19 Door operation Handle controlled ABLOY EXIT lock case with automatic deadlocking latch bolt. The lock can always be opened from the inside by handle or panic bar. 225 0 20 69 22 14 152 Lock case functions can be selected with the forend snib. To use the snib, the key must be turned in the cylinder. UPPER SNIB POSITION = Deadlocking (locked position), bolt out 14 mm The lock can be opened from the outside by key only (from the cylinder) and from the inside anytime by handle, push pad or panic bar. LOWER SNIB POSITION = Day use (open position), bolt out 14 mm The lock can be opened from the outside by handle and from the inside anytime by handle, or panic bar. Strike plate is not needed in double door solutions. 4 5,5 14 15

active door PUSH/PULL FUNCTION LOCK CASE LE13 FOR DOUBLE LEAF WOODEN/METAL DOOR OPTIONS FOR PASSIVE DOOR LEAF PRODUCTS WITH THE LOCK CASE ACTIVE DOOR PASSIVE DOOR PRODUCT CODE Mechanical locking Mechanical locking PE911 LOCKS FOR EXIT DOOR SOLUTIONS - lock case LE13 - ABLOY EXIT single handle for wooden/metal door - door pull from ABLOY product range EN 1125 - lock case LE13 - ABLOY EXIT panic bar PBE002 - door pull from ABLOY product range active door Application Onefit FIRE Onefit EN 1125 FIRE The push/pull function exit door lock case ABLOY LE13 is recommended to be used in exit or emergency exit doors which are in passage or in entrances. From the outside, the lock can be opened by key and door pull, from the inside always by handle. From the outside, the lock can be opened by key and door pull, from the inside always by panic bar. - EMERGENCY EXIT EXIT BY HANDLE OR PUSH PAD 1 EN 1125 - PANIC EXIT EXIT BY PANIC BAR 22 51 19 Suitable for fire rated doors. 20 LE13x is the microswitch version of the lock. 0 Door operation 69 LOCKS FOR EMERGENCY EXIT DOOR SOLUTIONS Push/pull function ABLOY EXIT lock case with automatic deadlocking latch bolt. The lock is deadlocked always when the door is closed. 225 22 14 152 The lock can always be opened from the inside by handle or panic bar. Strike plate is not needed in double door solutions. - lock case LE13 - double cylinder CY002 - ABLOY EXIT single handle for wooden/metal door - ABLOY EXIT seal EH900 -door pull from ABLOY product range - lock case LE13 - inside cylinder CY021 - ABLOY EXIT single handle for wooden/metal door - ABLOY EXIT seal EH900 4 Onefit FIRE Onefit FIRE 5,5 The lock can be opened from the outside by key and door pull, from the inside by key. In an emergency situation, the lock can always be opened from the inside by handle after breaking the seal. The lock can be opened from the inside by key.in an emergency situation, the lock can always be opened from the inside by handle after breaking the seal. 16 17

active door PUSH/PULL FUNCTION LOCK CASE LE16 FOR DOUBLE LEAF WOODEN/METAL DOOR OPTIONS FOR PASSIVE DOOR LEAF PRODUCTS WITH THE LOCK CASE ACTIVE DOOR PASSIVE DOOR PRODUCT CODE Mechanical locking Mechanical locking PE911 ACTIVE door LOCKS FOR EXIT DOOR SOLUTIONS - lock case LE16 - ABLOY EXIT single handle for wooden/metal door - door pull from ABLOY product range EN 1125 - lock case LE16 - ABLOY EXIT panic bar PBE002 - door pull from ABLOY product range active door Onefit Onefit EN 1125 Application The push/pull function exit door lock case ABLOY LE16 is recommended to be used in exit doors which are in passage or in entrances. - EMERGENCY EXIT EXIT BY HANDLE 51 1 In the locked position, the lock can be opened from the outside by key and door pull, from the inside always by handle. In the open position, the lock can be opened from the outside by door pull and from the inside by handle. In the locked position, the lock can be opened from the outside by key and door pull, from the inside always by panic bar. In the open position, the lock can be opened from the outside by door pull and from the inside by panic bar. EN 1125 - PANIC EXIT EXIT BY PANIC BAR Not suitable for fire rated doors. 22 19 LE16x is the microswitch version of the lock. 0 20 Door operation 69 Push/pull function ABLOY EXIT lock case with automatic deadlocking. 22 14 152 The lock can always be opened from the inside by handle or panic bar. 225 Lock case functions can be selected with the forend snib. To use the snib, the key must be turned in the cylinder. UPPER SNIB POSITION = Deadlocking (locked position), bolt out 14 mm The lock can be opened from the outside by key only (from the cylinder) and from the inside anytime by handle, or panic bar. LOWER SNIB POSITION = Day use (open position), the bolt is locked inside the lock case, and the lock can be opened from the outside by door pull and from the inside anytime by handle, or panic bar. Strike plate is not needed in double door solutions. 4 5,5 1 19

active door HANDLE CONTROLLED LOCK CASE LE310 FOR SINGLE AND DOUBLE LEAF NARROW STILE DOOR OPTIONS FOR PASSIVE DOOR LEAF PRODUCTS WITH THE LOCK CASE ACTIVE DOOR PASSIVE DOOR PRODUCT CODE Mechanical locking Mechanical locking PE901 LOCKS FOR EXIT DOOR SOLUTIONS - lock case LE310 - single cylinder CY063 - ABLOY EXIT handle set for narrow stile door EN 1125 - lock case LE310 - single cylinder CY063 - ABLOY EXIT panic bar PBE001 - narrow stile door outside single handle from ABLOY product range active door Application Onefit FIRE Onefit EN 1125 FIRE The handle controlled exit lock case ABLOY LE310 is recommended to be used in exit doors which are in passage or in entrances. - EMERGENCY EXIT EXIT BY HANDLE EN 1125 - PANIC EXIT EXIT BY PANIC BAR In the locked position, the lock can be opened from the outside by key and handle, from the inside always by handle. In the open position, the lock can be opened from either side by handle. In the locked position, the lock can be opened from the outside by key and handle, from the inside always by panic bar.. In the open position, the lock can be opened from the outside by handle and from the inside by panic bar. Door operation Handle controlled ABLOY EXIT lock case with automatic deadlocking latch bolt. The lock can always be opened from the inside by handle or panic bar. Suitable for fire rated doors. Lock case functions can be selected with the forend snib. To use the snib, the key must be turned in the cylinder. UPPER SNIB POSITION = Deadlocking (locked position), bolt out 14 mm The lock can be opened from the outside by key only (from the cylinder) and from the inside anytime by handle or panic bar. LOWER SNIB POSITION = Day use (open position) The lock can be opened from the outside by handle and from the inside anytime by handle or panic bar. LE310X is the microswitch version of the lock. Striker plates Single leaf doors: LP702, LP703 Strike plate is not needed in double door solutions. 20 21

active door PUSH/PULL FUNCTION LOCK CASE LE314 FOR SINGLE AND DOUBLE LEAF NARROW STILE DOOR OPTIONS FOR PASSIVE DOOR LEAF PRODUCTS WITH THE LOCK CASE ACTIVE DOOR PASSIVE DOOR PRODUCT CODE Mechanical locking Mechanical locking PE901 LOCKS FOR EXIT DOOR SOLUTIONS - lock case LE314 - single cylinder CY063 - ABLOY EXIT single handle for narrow stile door - door pull from ABLOY product range EN 1125 - lock case LE314 - single cylinder CY063 - ABLOY EXIT panic bar PBE003 - door pull from ABLOY product range active door Application FIRE EN 1125 FIRE The push/pull function exit door lock case ABLOY LE314 is recommended to be used in exit or emergency exit doors which are in passage or in entrances. - EMERGENCY EXIT EXIT BY HANDLE EN 1125 - PANIC EXIT EXIT BY PANIC BAR From the outside, the lock can be opened by key and door pull, from the inside always by handle. From the outside, the lock can be opened by key and door pull, from the inside always by panic bar. Door operation Push/pull function ABLOY EXIT lock case with automatic deadlocking latch bolt. The lock can always be opened from the inside by handle or panic bar. LOCKS FOR EMERGENCY EXIT DOOR SOLUTIONS Suitable for fire rated doors. The lock is deadlocked (locked position) always when the door is closed. LE314X is the microswitch version of the lock. Striker plates - lock case LE314 - double cylinder CY065 - ABLOY EXIT single handle for narrow stile door - ABLOY EXIT seal EH900 - door pull from ABLOY product range - lock case LE314 - inside cylinder CY064 - ABLOY EXIT single handle for narrow stile door - ABLOY EXIT seal EH900 Single leaf doors: LP702, LP703 Strike plate is not needed in double door solutions. FIRE FIRE The lock can be opened from the outside by key and door pull, from the inside by key. In an emergency situation, the lock can always be opened from the inside by handle after breaking the seal. The lock can be opened from the inside by key. In an emergency situation, the lock can always be opened from the inside by handle after breaking the seal. 22 23

active door PUSH/PULL FUNCTION LOCK CASE LE315 FOR SINGLE AND DOUBLE LEAF NARROW STILE DOOR OPTIONS FOR PASSIVE DOOR LEAF PRODUCTS WITH THE LOCK CASE ACTIVE DOOR PASSIVE DOOR PRODUCT CODE Mechanical locking Mechanical locking PE901 LOCKS FOR EXIT DOOR SOLUTIONS - lock case LE315 - single cylinder CY063 - ABLOY EXIT single handle for narrow stile door - door pull from ABLOY product range EN 1125 - lock case LE315 - single cylinder CY063 - ABLOY EXIT panic bar PBE003 - door pull from ABLOY product range active door Application The push/pull function exit door lock case ABLOY LE315 is recommended to be used in exit doors which are in passage or in entrances. - EMERGENCY EXIT EXIT BY HANDLE EN 1125 - PANIC EXIT EXIT BY PANIC BAR EN 1125 In the locked position, the lock can be opened from the outside by key and door pull, from the inside always by handle. In the open position, the lock can be opened from the outside by door pull and from the inside by handle. In the locked position, the lock can be opened from the outside by key and door pull, from the inside always by panic bar. In the open position, the lock can be opened from the outside by door pull and from the inside by panic bar. Door operation Push/pull function ABLOY EXIT lock case with automatic deadlocking. The lock can always be opened from the inside by handle or panic bar. Not suitable for fire rated doors. Lock case functions can be selected with the forend snib. To use the snib, the key must be turned in the cylinder. UPPER SNIB POSITION = Deadlocking (locked position), bolt out 14 mm The lock can be opened from the outside by key only (from the cylinder) and from the inside anytime by handle or panic bar. LOWER SNIB POSITION = Day use (open position): the bolt is locked inside the lock case so that the lock can be opened from the outside by door pull and from the inside anytime by handle or panic bar. LE315X is the microswitch version of the lock. Striker plates Single leaf doors: LP702, LP703 Strike plate is not needed in double door solutions. 24 25

ACTIVE DOOR Applications HANDLE CONTROLLED LOCK CASES FOR SINGLE LEAF DOORS Handle controlled solenoid locks ABLOY EL51 and PE50 are recommended to be used in the exit routes with medium or low traffic doors. - EMERGENCY EXIT EXIT BY HANDLE ELECTRIC LOCKS FOR EXIT SOLUTIONS - lock case EL51 - Single cylinder CY037 - ABLOY EXIT handles for wooden or metal doors EN 1125 - lock case PE50 - ABLOY EXIT panic bar PBE001 - single handle for wooden or metal doors from ABLOY product range ACTIVE DOOR EN 1125 - PANIC EXIT EXIT BY PANIC BAR FIRE Onefit EN 1125 FIRE Door operation When electric control is on, the lock can be opened by outside handle. HANDLE OPERATION => EL50: Outside handle is electrically controlled, lock can always be opened from inside by exit handle (split spindle). EL51 50 2 When electric control is on, the lock can be opened by outside handle. The lock can always be opened from the outside by key, and from the inside by exit handle. When electric control is on, the lock can be opened by outside handle. The lock can always be opened from the outside by key, and from the inside by panic bar. 30 PANIC BAR=> PE50: Outside handle is electrically controlled, lock can always be opened from inside by panic bar (split spindle) Suitable for fire rated doors. Not suitable to be used with swing door automatics. 77.5 25.5 20 Settable functions: - handing - bolt throw: 14 mm (fire doors) / 20 mm (only EL51) - electrical function: fail secure / fail safe - side of the exit handle / panic bar 225.5 203.5 14 / 20 1.5 9 69.5 15 Operation voltage: 12-24 V DC Maximum current: 550 ma (12 V) 270 ma (24 V) Operation temperature: -20 o C - +60 o C Backset: 50 mm 4 Strike plates Single doors: Adjustable strike plates LP711, LP714. LP721, LP732 Strike plates for metal doors: EN179; EA307, EA30 EN1125; LP702, LP703 22 3 26 27

ACTIVE DOOR HANDLE CONTROLLED LOCK CASES FOR DOUBLE LEAF DOORS OPTIONS FOR PASSIVE DOOR LEAF PRODUCTS WITH EL50 ACTIVE DOOR PASSIVE DOOR PRODUCT CODE (incl. top and centre lock, bottom latch) ELECTRIC LOCKS FOR EXIT SOLUTIONS EN 1125 - lock case EL50 - lock case EL50 - ABLOY EXIT handles for wooden - ABLOY EXIT panic bar PBE001 or metal doors - single handle for wooden or metal doors from ABLOY product range ACTIVE DOOR Electric locking Mechanical locking EXH/P/B910 Electric locking Electrically controlled (does not confirm EN179) PE912 FIRE EN 1125 FIRE Applications When electric control is on, the lock can be opened from outside by handle. The lock can always be opened from the outside by key and from the inside by exit handle. When electric control is on, the lock can be opened from outside by handle. The lock can always be opened from the outside by key and from the inside by panic bar. Handle controlled solenoid lock case ABLOY EL50 is recommended to be used in exit routes with medium or low traffic. - EMERGENCY EXIT EXIT BY HANDLE EN 1125 - PANIC EXIT EXIT BY PANIC BAR Door operation When electric control is on, the lock can be opened by outside handle. HANDLE AND PANIC BAR => EL50: Outside handle is electrically controlled, lock can always be opened from inside by exit handle or panic bar (split spindle). Suitable for fire rated doors. Not suitable to be used with swing door automatics. Settable functions: - handing - bolt throw: 14 mm (fire doors) / 20 mm - electrical function: fail secure / fail safe - side of the exit handle / panic bar Operation voltage: 12-24 V DC Maximum current: 550 ma (12 V) 270 ma (24 V) Operation temperature: -20 o C - +60 o C Backset: 50 mm 2 29

ACTIVE DOOR Applications MOTOR LOCKS FOR SINGLE WOODEN/metal doors DOORS EL593 and PE590 motor locks are recommended to be used in high traffic exit doors where push / pull function or door automatics are needed. - EMERGENCY EXIT EXIT BY HANDLE ELECTRIC LOCKS FOR EXIT SOLUTIONS EN 1125 - lock case EL593 - lock case EL593 - ABLOY EXIT single handle for - ABLOY EXIT panic bar PBE002 wooden or metal doors - door pull from ABLOY product - Door pull from ABLOY product range range ACTIVE DOOR EN 1125 - PANIC EXIT EXIT BY PANIC BAR Door operation When electric control is on, the door can be opened by pushing or pulling. FIRE Onefit EN 1125 FIRE When electric control is on, the lock can be opened from outside by door pull. The lock can always be opened from the outside by key and from the inside by exit handle. When electric control is on, the lock can be opened from outside by door pull. The lock can always be opened from the outside by key and from the inside by panic bar. The door can always be opened by using inside handle or panic bar. - Handle use is possible also in 2-way access controlled doors. To enable 2-way access control the inside handle needs to be disengaged by electrical control. This function does not meet EN179 demands! - 2-way access controlled exit doors must always be approved by local authorities. - Panic bar is not suitable in 2-way access controlled doors. 50 2 30 20 Suitable for fire rated doors. Suitable to be used with swing door automatics Operation voltage: 12-24 V DC Maximum current: 700 ma (12 V) 1700 ma (24 V) Operation temperature: -20 o C - +60 o C Backset: 50 mm Strike plates Adjustable strike plates LP712, LP722, LP732 Strike plates for metal doors EA307, EA30, 4613, 4614 225.5 203.5 77.5 14 / 20 1.5 9 4 25.5 69.5 159 22 3 30 31

ACTIVE DOOR MOTOR LOCK FOR DOUBLE LEAF WOODEN / METAL doors OPTIONS FOR PASSIVE DOOR LEAF PRODUCTS WITH PE592 ACTIVE DOOR PASSIVE DOOR PRODUCT CODE (incl. top and centre lock, bottom latch) ELECTRIC LOCKS FOR EXIT SOLUTIONS - lock case PE592 - ABLOY EXIT single handle for wooden or metal doors - door pull from ABLOY product range EN 1125 - lock case PE592 - ABLOY EXIT panic bar PBE002 - door pull from ABLOY product range ACTIVE DOOR Electric locking Mechanical locking PE910 Electric locking Electric locking / swing door operator PE913 FIRE EN 1125 FIRE Applications PE592 motor locks is recommended to be used in high traffic exit doors where push / pull function or door automatics is needed. When electric control is on, the lock can be opened from outside by door pull. The lock can always be opened from the outside by key and from the inside by exit handle. When electric control is on, the lock can be opened from outside by door pull. The lock can always be opened from the outside by key and from the inside by panic bar. - EMERGENCY EXIT EXIT BY HANDLE 50 2 EN 1125 - PANIC EXIT EXIT BY PANIC BAR 30 20 Suitable for fire rated doors. Suitable to be used with swing door automatics. 77.5 25.5 Door operation Door can be opened pushing / pulling, when electrical control is on. 225.5 203.5 14 / 20 1.5 69.5 159 Settable functions: - handing 9 4 Inside handle or panic bar opens the door always -Handle use is possible in 2-way access controlled doors. Handle needs to be disengaged by electrical control to enable 2-way access control. This function does not meet EN179 demands! - Local authorities must always approve 2-way access controlled exit doors. - Panic bar is not suitable in 2-way access controlled doors. Operation voltage: 12-24 V DC Maximum current: 700 ma (12 V) 1700 ma (24 V) Operation temperature: -20 o C - +60 o C Backset: 50 mm Strike plate is not needed in double door solutions. 22 3 32 33

ACTIVE DOOR Applications PUSH/ PULL FUNCTION LOCK CASE FOR SINGLE WOODEN/metal DOORS The double action bolt structure of ABLOY EL502 enables quick and easy opening by pushing or pulling. EL502 is recommended to be used in medium or low traffic exit doors. Can also be used in swinging doors. ELECTRIC LOCKS FOR EXIT SOLUTIONS - lock case EL502 - ABLOY EXIT cylinder - push pad CY077 - door pull from ABLOY product range ACTIVE DOOR - EMERGENCY EXIT EXIT BY PUSH PAD (push pad - cylinder) Door operation When electric control is on, the door can be opened by pushing or pulling. The lock can always be opened from the inside by push pad. When electric control is on, the door can be opened by pushing or pulling. The lock can always be opened from the outside by key, and from the inside by push pad. Not suitable for fire rated doors. Not recommended to be used in doors with seal force. Suitable to be used with swing door automatics in light weight doors. Settable functions: - Non-handed, symmetrical trigger bolt - Electrical function: fail secure or fail safe Operation voltage: 12-24 V DC Maximum current: 550 ma (12 V) 270 ma (24 V) Operation temperature: -20 o C - +60 o C Backset: 50 mm Strike plates Adjustable strike plates LP711, LP714, LP721 Strike plates for metal doors EA307, EA30, 4613, 4614 34 35

3,5 115 ACTIVE DOOR HANDLE CONTROLLED LOCK CASE FOR SINGLE AND DOUBLE LEAF narrow stile doors OPTIONS FOR PASSIVE DOOR LEAF PRODUCTS WITH EL40 ACTIVE DOOR PASSIVE DOOR PRODUCT CODE (incl. top and centre lock, bottom latch) Electric locking Mechanical locking PE900 ELECTRIC LOCKS FOR EXIT SOLUTIONS - lock case EL40 - single cylinder CY063 - ABLOY EXIT handle for narrow stile doors EN 1125 - lock case EL40 - single cylinder CY063 - ABLOY EXIT panic bar PBE001 - single handle for narrow stile doors from ABLOY product range ACTIVE DOOR Electric locking Electrically controlled (does not confirm EN179) PE902 FIRE EN 1125 FIRE Applications Handle controlled solenoid lock case ABLOY EL40 is recommended to be used in exit routes with medium or low traffic - EMERGENCY EXIT EXIT BY HANDLE When electric control is on, the lock can be opened from outside by handle. The lock can always be opened from the outside by key and from the inside by exit handle. When electric control is on, the lock can be opened by outside handle. The lock can always be opened from the outside by key and from the inside by panic bar. EN 1125 - PANIC EXIT EXIT BY PANIC BAR 5,5 12 Door operation 20 24,5 Outside handle is electrically controlled, lock can always be opened from inside by exit handle or panic bar (split spindle). 104 2 15 Suitable for fire rated doors. Not suitable to be used with swing door automatics. Settable functions: - handing - electrical function: fail secure / fail safe - side of the exit handle / panic bar 225 200 4 1 11,2 5,1 163,5 Operation voltage: 12-24 V DC Maximum current: 550 ma (12 V) 270 ma (24 V) Operation temperature: -20 o C - +60 o C Backset: 29 mm, 35 mm Strike plates Single doors: EN179; EA307, EA30 EN1125; LP702, LP703 25 3 16 29/35 47/53 x 5,5 5,5 17,5 2 21, Strike plate is not needed in double door solutions. 36 37

24.5 ACTIVE DOOR MOTOR LOCK CASE FOR SINGLE AND DOUBLE LEAF narrow stile doors OPTIONS FOR PASSIVE DOOR LEAF PRODUCTS WITH EL490 ACTIVE DOOR PASSIVE DOOR PRODUCT CODE (incl. top and centre lock, bottom latch) Electric locking Mechanical locking PE900 ELECTRIC LOCKS FOR EXIT SOLUTIONS - lock case EL490 - single cylinder CY063 - ABLOY EXIT single handle for narrow stile doors - Door pull from ABLOY product range EN 1125 - lock case EL490 - single cylinder CY063 - ABLOY EXIT panic bar PBE003 - door pull from ABLOY product range ACTIVE DOOR Electric locking Electric locking / Swing door operator Applications ABLOY EL490 motor lock is recommended to be used in high traffic exit doors where push / pull function or door automatics are needed. - EMERGENCY EXIT EXIT BY HANDLE PE903 2 x 5.5 FIRE EN 1125 FIRE When electric control is on, the lock can be opened from outside by door pull. The lock can always be opened from the outside by key and from the inside by exit handle. When electric control is on, the lock can be opened from outside by door pull. The lock can always be opened from the outside by key and from the inside by panic bar. EN 1125 - PANIC EXIT EXIT BY PANIC BAR 12 21.5 Door operation When electric control is on, the door can be opened by pushing or pulling. 104 R.2 23.5 15 Inside handle or panic bar opens the door always - Handle use is possible in 2-way access controlled doors. Handle needs to be disengaged by electrical control to enable 2-way access control. This function does not meet EN179 demands! - Local authorities must always approve 2-way access controlled exit doors. - Panic bar is not suitable in 2-way access controlled doors. 27 253 1 4 10.5 17.5 21.3 5.1 115 211.5 21.3 Suitable for fire rated doors. Suitable to be used with swing door automatics. Operation voltage: 12-24 V DC Maximum current: 700 ma (12 V) 1700 ma (24 V) Operation temperature: -20 o C - +60 o C Backset: 29 mm, 35 mm Strike plates Single doors: EN179; EA307, EA30 EN1125; LP702, LP703 25 16 3 29 / 35 47 / 53 3 x 5.5 Strike plate is not needed in double door solutions. 3 39

ACTIVE DOOR Applications PUSH / PULL FUNCTION LOCK CASE FOR SINGLE narrow stile DOORS The double action bolt structure of ABLOY EL402 enables quick and easy opening by pushing or pulling. EL402 is recommended to be used in medium or low traffic exit doors. Can also be used in swinging doors. ELECTRIC LOCKS FOR EXIT SOLUTIONS - lock case EL402 - ABLOY EXIT cylinder - push pad CY00 - door pull from ABLOY product range ACTIVE DOOR - EMERGENCY EXIT EXIT BY PUSH PAD (push pad - cylinder) Door operation When electric control is on, the door can be opened by pushing or pulling. The lock can always be opened from the inside by push pad. When electric control is on, the door can be opened by pushing or pulling. The lock can always be opened from the outside by key, and from the inside by push pad. Not suitable for fire rated doors. Not recommended to be used in doors with seal force. Suitable to be used with swing door automatics in light weight doors. Settable functions: - Adjustable backset - Non-handed, symmetrical trigger bolt - Electrical function: fail secure or fail safe Operation voltage: 12-24 V DC Maximum current: 550 ma (12 V) 270 ma (24 V) Operation temperature: -20 o C - +60 o C Backset: 25 mm, 2 mm, 30 mm, 33 mm, 35 mm Strike plates EA307, EA30, 4613, 4614 40 41

PASSIVE DOOR Handle operated mechanical WOODEN/ METAL passive door Lock case for active door The following lock cases can be used in active door : - Mechanical lock case LE11, LE13 or LE16 - Electric lock EL50 or PE592 (with exit handle / panic bar) Options for passive door leaf products. MECHANICAL PASSIVE DOOR Mechanical locking in active door - PE911 - ABLOY EXIT single handle for wooden or metal doors - ABLOY EXIT seal EH900 when required EN 1125 Mechanical locking in active door - PE911 - ABLOY EXIT panic bar PBE002 PASSIVE DOOR PASSIVE DOOR ACTIVE DOOR PRODUCT CODE (incl. top and centre lock, bottom latch) Mechanical locking Mechanical locking PE911 Mechanical locking Electric locking PE910 Passive door can always be opened by inside handle. If there is an EXIT seal, it will break when handle is used = emergency exit. EN 1125 Passive door can always be opened by panic bar. Applications Minimum width of passive door is 500 mm. Solutions are used in wooden or metal passive door leaf. Passive door solution can be used together with: - mechanical locking in active door - 1-way access controlled electromechanical locking in active door. The passive door can always be opened from inside by exit handle or panic bar Electric locking in active door EN 1125 Electric locking in active door - EMERGENCY EXIT EXIT BY HANDLE EN 1125 - PANIC EXIT EXIT BY PANIC BAR EXAMPLE 3 - PE910 - ABLOY EXIT single handle for wooden or metal doors - ABLOY EXIT seal EH900 when required EXAMPLE 4 - PE910 - ABLOY EXIT panic bar PBE002 Mechanical passive door solution Mechanical passive door solution consists from three locking devices: bottom latch, top lock and centre lock. PE911 includes: - bottom latch LE90 - top lock LE91 - centre lock LE92 PE910 includes: - bottom latch LE90 - top lock LE91 - centre lock LE953 Strike plate for top lock - EA307, EA30. 4613 or 4614 Passive door can always be opened by inside handle. If there is an EXIT seal, it will break when handle is used = emergency exit. EN 1125 Passive door can always be opened by panic bar. 42 43

PASSIVE DOOR Electric passive door solution for swing door AUTOMATICS, WOODEN/metal doors Lock case for active door Compatible motor lock PE592 with exit handle or panic bar. Options for passive door leaf products. PASSIVE DOOR ACTIVE DOOR PRODUCT CODE (incl. top and centre lock, bottom latch) Electric locking Electric locking PE913 Electric passive door with swing door AUTOMATICS Electric locking in active door - PE913 - ABLOY EXIT single handle for wooden or metal doors OPEN /DAY USE (Lock is open) Both door leaves open automatically for example by radars, both for entrance and exit. Both door leaves can always be opened by exit handle for safe exit. LOCKED /NIGHT USE The active door opens only for example by card reader. Card reader or other authorization can open also both doors automatically. Both door leaves can always be opened by exit handle for safe exit. When choosing impulse and safety devices to swing door automatics, the safety and functionality of door environment has to be taken into account. PASSIVE DOOR Applications EN 1125 Minimum width of passive door is 500 mm. Solutions are used in wooden or metal passive door leaf. Passive door solution can be used together with: - 1-way access controlled or time controlled doors - electrical locking in active door, swing door automatics opens both doors. The passive door can always be opened by exit handle or panic bar. Electric passive door solution Electric passive door solution consists from three locking devices: bottom latch, top lock and centre lock. PE913 includes: - bottom latch LE90 - top lockpe951 - centre lock LE953 Strike plate for top lock - EA307, EA30. 4613 or 4614 Electric locking in active door - PE913 - ABLOY EXIT panic bar PBE002 EN 1125 OPEN / DAY USE (Lock is open) Both door leaves opens automatically for example by radars, both for entrance and exit. Both door leaves can always be opened by panic bar for safe exit. LOCKED / NIGHT USE The active door opens for example by card reader. Card reader or other authorization can open also both doors automatically. Both door leaves can always be opened by panic bar for safe exit. When choosing impulse and safety devices to swing door automatics, the safety and functionality of door environment has to be taken into account. 44 45

PASSIVE DOOR MECHANICAL PASSIVE DOOR SOLUTION Lock case for active door The following lock cases are compatible : - Mechanical lock case LE310, LE314 or LE315 - Electric lock EL40 or EL490 (with exit handle or panic bar MECHANICAL PASSIVE DOOR Mechanical locking in active door - PE901 - ABLOY EXIT single handle for narrow stile doors - ABLOY EXIT seal EH900 when required EN 1125 Mechanical locking in active door - PE901 - ABLOY EXIT panic bar PBE003 PASSIVE DOOR Options for passive door leaf products. EN 1125 PASSIVE DOOR ACTIVE DOOR PRODUCT CODE (incl. top and centre lock, bottom latch) Mechanical locking Mechanical locking PE901 Passive door can always be opened by inside handle. If there is an EXIT seal, it will break when handle is used = emergency exit. Passive door can always be opened by panic bar. Mechanical locking Electric locking PE900 Applications Electric locking in active door EN 1125 Electric locking in active door Minimum width of passive door is 500 mm. Solutions are used in narrow stile passive door leaf. Passive door solution can be used together with: - mechanical locking in active door - electromechanical 1-way access control in active door The passive door can always be opened by exit handle or panic bar. EXAMPLE 3 - PE900 - ABLOY EXIT single handle for narrow stile doors - ABLOY EXIT seal EH900 when required EXAMPLE 4 - PE900 - ABLOY EXIT panic bar PBE0033 Mechanical passive door solution Mechanical passive door solution consists from three locking devices: bottom latch, top lock and centre lock. PE901 includes: - bottom latch LE930 - top lock LE931 - centre lock LE932 Passive door can always be opened by inside handle. If there is an EXIT seal, it will break when handle is used = emergency exit. EN 1125 Passive door can always be opened by panic bar. PE900 includes: - bottom latch LE930 - top lock LE931 - centre lock LE943 Strike plate for top lock - EA307, EA30. 4613 or 4614 46 47

PASSIVE DOOR Electric passive door solution for swing door AUTOMATICS, narrow stile doors Lock case for active door Compatible motor lock EL490 with exit handle or panic bar. Options for passive door leaf products. PASSIVE DOOR ACTIVE DOOR PRODUCT CODE (incl. top and centre lock, bottom latch) Electric locking Electric locking PE903 Electric passive door with swing door AUTOMATICS Electric locking in active door - PE903 - ABLOY EXIT single handle for narrow stile doors - ABLOY EXIT seal EH900 when required OPEN / DAY USE (Lock is open) Both door leaves open automatically for example by radars, both for entrance and exit. Both door leaves can always be opened by exit handle for safe exit. LOCKED / NIGHT USE The active door opens only for example by card reader. Card reader or other authorization can open also both doors automatically. Both door leaves can always be opened by exit handle for safe exit. When choosing impulse and safety devices to swing door automatics, the safety and functionality of door environment has to be taken into account. PASSIVE DOOR Applications Minimum width of passive door is 500 mm. Solutions are used in narrow stile passive door leaf with high traffic. Passive door solution can be used together with: - electrical locking in active door - swing door automatics opens both doors The passive door can always be opened by exit handle or panic bar. The passive door leaf is primarily used in emergency and panic situations. Electric passive door solution Electric passive door solution consists from three locking devices: bottom latch, top lock and centre lock. PE903 includes: - bottom latch LE930 - top lock PE941 - centre lock LE943 Strike plate for top lock - EA307, EA30. 4613 or 4614 Electric locking in active door - PE903 - ABLOY EXIT panic bar PBE003 EN 1125 EN 1125 OPEN / DAY USE (Lock is open) Both door leaves opens automatically for example by radars, both for entrance and exit. Both door leaves can always be opened by panic bar for safe exit. LOCKED / NIGHT USE The active door opens for example by card reader. Card reader or other authorization can open also both doors automatically. Both door leaves can always be opened by panic bar for safe exit. When choosing impulse and safety devices to swing door automatics, the safety and functionality of door environment has to be taken into account. 4 49

152 152 STRIKER PLATES LP702 LP703 flush doors LP711 LP712 LP714 40 2 40 2 45 2 200 167 200 167 200 12-17 4 2 36 12-17 4 31 65 17-22 2 36 4613 4614 ea307 ea30 27 40 2 29,5 27,2 29,5 29,5 27,2 29,5 200 13 2 4 65 31 2 36 65 31 200 200 152 60, 30,5 152 60, 30,5 5 2,5 33 Luettelopiirustus LP702 33 Luettelopiirustus LP703 901031 0 901030 0 STRIKER PLATES FOR PASSIVE DOOR TOP LOCK ea307 ea30 4613 4614 3 3 2,5 5 REBATED doors LP721 LP722 LP731 LP732 5,5,5 3 5,5 1 3 50 51

Abloy EXIT handles for WOODEN/metal door Surely you know that the... BRASS AND ALUMINIUM HANDLES - are available in various surface finishes (the brochure includes standard products only) - are available with Abloy ACTIVE surface finishes. ABLOY EXIT inside SINGLE HANDLES with outside security PLATE FOR WOODEN/METAL DOOR Product Product number Dimensional drawing Single handle INOXI 3-19/030 (return spring + spindle) EH070 Surface finish Please check availability from Abloy's Architectural Hardware customer service door thickness 50-65 mm ABLOY EXIT HANDLE SETS FOR WOODEN/METAL DOOR Single handle INOXI 3-19K/030 (return spring + spindle) EH073 Product Product number Dimensional drawing Surface finish Please check availability from Abloy's Architectural Hardware customer service door thickness 50-65 mm INOXI 3-19/032 (return spring + split spindle) EH070 Single handle PRESTO 3-20/030 (return spring + spindle) EH060 door thickness 44-61 mm INOXI 3-19K/032 (return spring + split spindle) EH073 door thickness 50-65 mm door thickness 44-61 mm PRESTO 3-20/032 (return spring + split spindle) EH060 Single handle STRATO 13/030 O right (return spring + spindle) EH013 door thickness 44-61 mm door thickness 50-65 mm STRATO 13/032 O right (return spring + split spindle) door thickness 44-61 mm EH013 Single handle STRATO 13/030 V left (return spring + spindle) EH013 STRATO 13/032 V left (return spring + split spindle) door thickness 44-61 mm FORUM EXIT 4/032 (return spring + split spindle) EH013 EH004 Ø 50 130 52 11 door thickness 50-65 mm Single handle FORUM EXIT 4/030 (return spring + spindle) door thickness 50-65 mm EH004 Ø 50 130 52 11 door thickness 44-61 mm POLAR EXIT 6/032 (return spring + split spindle) door thickness 44-61 mm EH006 Ø 50 130 52 10 Single handle POLAR EXIT 6/030 (return spring + spindle) door thickness 50-65 mm EH006 Ø 50 130 52 10 52 53

Abloy EXIT handles for narrow stile door ABLOY EXIT handle sets for narrow stile door Product Product number Dimensional drawing Surface finish Please check availability from Abloy's Architectural Hardware customer service ABLOY EXIT SINGLE HANDLES with outside security plate for narrow stile door Product Product Dimensional drawing Surface finish number Please check availability from Abloy's Architectural Hardware customer service INOXI 3-19/0650 (return spring + split spindle) EH070 Single handle INOXI 3-19/0630 (return spring + spindle) EH070 door thickness 3-54 mm INOXI 3-19K/0650 (return spring + split spindle) EH073 door thickness 45-60 mm door thickness 3-54 mm PRESTO 3-20/0650 (return spring + split spindle) EH060 Single handle INOXI 3-19K/0630 (return spring + spindle) EH073 door thickness 3-54 mm door thickness 45-60 mm STRATO 13/0650 O right (return spring + split spindle) door thickness 3-54 mm EH013 Single handle PRESTO 3-20/0630 (return spring + spindle) EH060 STRATO 13/0650 V left (return spring + split spindle) door thickness 3-54 mm FORUM EXIT 4/0650 (return spring + split spindle) door thickness 3-54 POLAR EXIT 6/0650 (return spring + split spindle) door thickness 3-54 mm EH013 EH004 EH006 12 12 130 130 52 11 52 10 door thickness 45-60 mm Single handle STRATO 13/0630 O right (return spring + spindle) door thickness 45-60 mm Single handle STRATO 13/0630 V left (return spring + spindle) EH013 EH013 door thickness 45-60 mm 130 Single handle FORUM EXIT 4/0630 (return spring + spindle) EH004 32 12 13 52 door thickness 45-60 11 Single handle POLAR EXIT 6/0630 (return spring + spindle) EH006 12 130 52 door thickness 45-60 mm 13 10 32 54 55

WOODEN/METAL DOOR OUTSIDE HANDLES, USED WITH EXIT PANIC BAR PB001 NARROW STILE DOOR OUTSIDE HANDLES, USED WITH EXIT PANIC BAR PB001 Product Product number Dimensional drawing Surface finish Please check availability from Abloy's Architectural Hardware customer service Product Product number Dimensional drawing Surface finish Please check availability from Abloy's Architectural Hardware customer service Single handle PRESTO 3-20/0321 DH060 Single handle PRESTO 3-20/0651 DH060 Single handle INOXI 3-19/0321 DH070 Single handle INOXI 3-19/0651 DH070 Single handle INOXI 3-19k/0321 DH073 Single handle INOXI 3-19k/0651 DH073 Single handle PARLAMENT DH002 Mitat_measures_Painike_handle_2_0650 Single handle PARLAMENT DH002 120 2/0321 Single handle PARLAMENT DH022 2/0651 Ø 16 70 12 50 32 Single handle PARLAMENT 22/0651 DH022 75 42 Ø 20 22/0321 Single handle FORUM 4/0321 DH004 Single handle FORUM 4/0651 DH004 Mitat_measures_Painike_handle_4_0650 Single handle POLAR 6/0321 DH006 Single handle POLAR 6/0651 DH006 Single handle PRESTO 3-16/0321 DH050 Single handle PRESTO 3-16/0651 DH050 56 57

PUSH PADS CYLINDERS Product Dimensional drawing WOODEN/METAL DOOR NARROW STILE DOOR Cylinderpush pad CY077 and CY00 CY037 CY063 CY077 130 110 CY00 110 42,3 130 5 37,5 24,5/30.5 114 52,4 5 5 114 79 42,3 CY002 CY065 PANIC BAR AND SEAL Product Dimensional drawing Panic bar PBE001, PBE002 PBE003 35 6 103 111 50 MAX. 1236 9 CY021 CY064 42 Seal EH900 Note: Replacement seal EH901 5 59

14 14 Product Dimensional Drawing Product Dimensional Drawing Product codes for passive wooden/metal door Product codes for passive wooden/ metal door 212.5 212 25 12 Top lock LE91 PE951 17 Top lock LE931 PE941 40 10 19 Centre LOCK LE92 LE953 260 10 Centre LOCK LE932 LE943 Bottom LATCH LE90 25 Bottom LATCH LE930 70 3 43.5 25 149 17 90 70 29.5 2.5 140 40 16.5 49 25 70 45 43.5 3 149 40 19 46 23.5 19.5 40 29 25 3 42.5 140 16.5 40 49 2 2 2.5 72 2.5 72 60 61

ELECTRIC LOCK ACCESSORIES BOTTOM LATCH STRIKER PLATE DRILLING DRAWING Lead covers EA20 ea20 EA21 ea21 Narrow stile door 323 299 25 Ø12 250 543 519 47 460 Ø1029 29 Ø10 Ø12 23, 17 17 Ø12 Maximum opening angle 120 o 23, 17 17 Ø12 Maximum opening angle 10 o. Used always if the distance from the hinge pin to the door frame is more than 20 mm. magnetic contacts Wooden doors: EA501 (closing contact ) EA503 (double change-over contact) Steel doors: EA502 (closing contact ) EA500 (double change-over contact) Wooden/metal door Flat magnet 95219 extension cables ABLOY extension cables guarantee lock durability up to 200,000 cycles. The cables have been tested for fire rated doors also. - 1 x 0.14 mm 2 - Operating temperature range: -20 o C...+60 o C For locks EL40, EL50, EL51 ABLOY EA210 (6 m) ABLOY EA220 (10 m) For locks EL402, EL502 ABLOY EA211 (6 m) ABLOY EA221 (10 m) For locks EL490, EL593, PE590, PE592 ABLOY EA217 (6 m) ABLOY EA227 (10 m) ABLOY EA22 (0.5 m) 62 63

coordinator fd110/fd111 ABLOY EXIT - PRODUCT TESTING, INSTALLATION AND MAINTENANCE Dimension Dimension ABLOY EXIT products have been tested and approved according to the requirements of the and EN 1125 standards by an accredited testing and certification body. Products have been tested and approved as complete units. The installation instructions specify which products can be combined with each other. The installer is responsible for ensuring correct installation and flawless operation according to the manufacture s instructions. To ensure correct operation of the exit doors, Abloy recommends that ABLOY EXIT products should be maintained and inspected for flawless operation every 3 months according to the manufacture s instructions. The property owner is responsible for maintenance and inspection of the operation. The person performing the work must be adequately qualified. Electromechanical lock cases must always be installed by an ABLOY-authorised locksmith. For the ABLOY EXIT products, the installation instructions are delivered with the packaging. CARRY bar fd101 For maintenance and inspection instructions, please refer to ABLOY EXTRANET and the Internet site www.abloy.com 64 65

TYÖNTÖLEVY PAINIKEPARI SISÄPUOLEN PAINIKE PUOMI TYÖNTÖLEVY UMPIOVI PROFIILIOVI UMPIOVI PROFIILIOVI MEKAANISET LUKKORUNGOT UMPIOVET PROFIILIOVET MECHANICAL LOCK CASES LUKKORUNKO LE10 ja LE11 LE13 ja LE14 EL502 PBE001 LE15 ja LE10 LE16 and LE11 WOODEN/METAL DOORS LE13 LE310 and LE14 LE15 and LE314LE16 NARROW STILE DOORS LE315 LOCK CASE LE310 LE314 EL51LE315 PBE002 EN1125 PBE003 CY077 (avainpesä+työntölevy) CY00 (avainpesä+työntölevy) ABLOY EXIT -PRODUCTS SELECTION CHART PUSH BAR PBE001 PBE002 EN1125 PBE003 PUSH PAD CY077 CY00 INOXI 3-19/032 INOXI 3-19K/032 PRESTO 3-20/032 STRATO 13/032 O ja V WOODEN/METAL DOOR INOXI 3-19/032 INOXI 3-19K/032 PRESTO 3-20/032 STRATO 13/032 FORUM EXIT 4/0630 POLAR EXIT 6/0630 INOXI 3-19/0650 INOXI 3-19K/0650 PRESTO 3-20/0650 STRATO 13/0650 O ja V HANDLE SET EN179 WOODEN/METAL DOOR EN179 INOXI 3-19/0650 INOXI 3-19K/0650 PRESTO 3-20/0650 STRATO 13/0650 INOXI 3-19/030 INOXI 3-19K/030 PRESTO 3-20/030 STRATO 13/030 O ja V FORUM EXIT 4/0630 POLAR EXIT 6/0630 INOXI 3-19/030 INOXI 3-19K/030 PRESTO 3-20/030 STRATO 13/030 INOXI 3-19/0630 INOXI 3-19K/0630 PRESTO 3-20/0630 STRATO 13/0630 O ja V SINGLE HANDLE WOODEN/METAL DOOR FORUM EXIT 4/0630 POLAR EXIT 6/0630 ULKOPUOLEN PAINIKE (0321/0651 kilpi) NARROW STILE DOOR INOXI 3-19/0630 INOXI 3-19K/0630 PRESTO 3-20/0630 STRATO 13/0630 FORUM EXIT 4/0630 POLAR EXIT 6/0630 ULKOPUOLEN VEDIN OUTSIDE DOOR HANDLE (0321/0651 kilpi) SINETTI (varapoistumistiet) OUTSIDE DOOR PULL SEAL (emergency exit) TYÖNTÖLEVY TYÖNTÖLEVY EL50EL502 SÄHKÖMEKAANISET LUKKORUNGOT PROFIILIOVET UMPIOVET ELECTRIC LOCKS PE50 EL50 WOODEN/METAL DOORS EL593 PE50 EL593 PE592 PE590 PE592 PE590 EL402 EL402 NARROW STILE DOORS EL51 EL40 EL40 EL490 EL490 = Painikepari = handle set = Painikepari = Puomi ja ulkopuolinen painike = inside panic bar and outside handle = Puomi = Puomi/työntölevy ja ulkopuolinen ja ulkopuolinen painike vedin = Puomi/työntölevy inside = Painike push ja ulkopuolinen pad ja ulkopuolinen vedin or panic vedin bar and outside door pull = Painike inside ja handle ulkopuolinen or handle-seal vedin and outside door pull Outside handles/door pulls from ABLOY building hardware range 66 67

www.abloy.com Abloy Oy Wahlforssinkatu 20 P.O.Box 10 FI-0101 JOENSUU FINLAND Tel. +35 20 599 2501 Fax +35 20 599 2209 An ASSA ABLOY Group brand Abloy Oy is one of the leading manufacturers of locks, locking systems and architectural hardware and the world s leading developer of products in the field of electromechanical locking technology. ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience. 0000000