Pole Accessories Ordering Guide Stock Poles
Pole Top Bullhorns Twin Round Steel Bullhorn Triple Round Steel Bullhorn Quad Round Steel Bullhorn Quad Round Steel Bullhorn Twin Square Steel Bullhorn Triple Square Steel Bullhorn Quad Square Steel Bullhorn Quad Square Steel Bullhorn BS28 DDB U BS28 GALV Galvanized BS38 DDB U BS38 GALV Galvanized BS48 DDB U BS48 GALV Galvanized BS49 DDB U BS49 GALV Galvanized SBS28 DDB U SBS28 GALV Galvanized SBS38 DDB U SBS38 GALV Galvanized SBS48 DDB U SBS48 GALV Galvanized SBS49 DDB U SBS49 GALV Galvanized Note: Standard bullhorn tenons are 2-3/8" OD for mounting fixures. 1
Wall Mount Brackets Right Angle Bracket Wall mount angle bracket with 11/16" mounting hole for yoke-mount floodlight. Curved Right Angle Bracket Wall mount angle bracket with that allows slipfitter floodlight to mount on 2-3/8" OD tenon. Vertical Right Angle Tenon Wall mount right angle bracket that allows slipfitter floodlight to mount on 2-3/8" OD tenon. Cantilever Crossarm Bracket Wall mounting 18" extension arm with 13/16" and 9/16" mounting holes for yoke mount floodlights. (Also available in two light version and with 42" extension). Horizontal Side Tenon Wall mount side tenon for mounting mast arm luminaires on a 2-3/8" OD x 6" tenon. FSAB DDB FSAB GALV Galvanized FRWB DDB FRWB GALV Galvanized FRWB 14-8 DDB FRWB 14-8 GALV Galvanized FWPB DDB FWPB GALV Galvanized SMAWLT T20 FLT6 DDB SMAWLT T20 FLT6 GALV Galvanized Pole Side Mount Brackets Curved Right Angle Bracket Pole side right angle brackets that allows slipfitter floodlights to mount on a 2-3/8" OD tenon. Vertical Right Angle Bracket Pole side right angle brackets that allows slipfitter floodlights to mount on a 2-3/8" OD tenon. Band Mount Bullhorn Pole side band mount bullhorn that allows two slipfitter floodlights to mount on a 2-3/8" OD tenon. (Also available for single arm, double arm or quad arm for round or square poles). Angle Iron Crossarm 42" Pole side angle iron crossarm that mounts two yoke-mount sportslights or floodlights. FSPB DDB FSPB GALV Galvanized FSPB 14-8 DDB FSPB 14-8 GALV Galvanized SMACBT 14/8T RNDxx DDB SMACBT 14/8T SQRxx GALV Galvanized FCX2 DDB FCX2 GALV Galvanized 2
Pole Side Mount Brackets (continued from previous page) Angle Iron Crossarm Pole Side angle iron crossarms that are 66" or 96" and allows three or four yoke mount sportslights or floodlights. FCX3 GALV Galvanized FCX4 GALV Galvanized Adapters 2-3/8" Tenon Reducer Converts a pole top tenon that is 2-7/8" 3-1/4" or 3-1/4" 3-3/4" to a 2-3/8" tenon. 2-7/8" Tenon Reducer Converts a pole top tenon that is 3-7/8" 4-1/4" or 4-1/4" 4-13/16" to a 2-7/8" tenon. Bolt-on Tenon for Square Poles Provides a pole top tenon on a square 4" or 5" open top pole. SMACTR T25-T20 DDB SMACTR T30-T20 DDB SMACTR T35-T25 DDB SMACTR T40-T25 DDB SBT-4S DDB (4" Pole) SBT-5S DDB (5" Pole) Mast Arm Adapter Mast arm adapter that allows area fixture to mount on a 2-3/8" OD mast arm. Round 2-3/8" Tenon Slipfitter Pole top tenon slipfitter allows area fixtures to mount on 2-3/8" slipfitter drilled for 1, 2, 3, or 4. Also available to fit a T25 (2-7/8" OD), T30 (3-1/2" OD), or a T35 (4" OD) tenon. KMA DDB (K-series fixtures) KMA8 DDB (AS, MR, CSX, DSX fixtures) T20-190 DDB (K-Series fixtures) T20-280 DDB (K-Series fixtures) AST20-190 DDB (AS, MR, CSX, DSX fixtures) AST20-280 DDB (AS, MR, CSX, DSX fixtures) 2-3/8" Square Tenon Slipfitter Pole top tenon slipfitter allows area fixtures to mount on 2-3/8" slipfitter drilled for 1, 2, 3, or 4. TSQ20-190 3 DDB ASTSQ20-190 3 DDB Universal Mounting Bracket Square and round pole universal mounting bracket adapter. PUMBA (specify finish) 3
Area Fixture Brackets 1-2/3" OD x 30" Cantilever Mast Arm Wall mount that allows an area or street light to mount on a 1-2/3" OD x 30" mast arm. SMAWL T14 US2-5 DDB SMAWL T14 US2-5 GALV Galvanized 2-3/8" OD x 30" Cantilever Wall Mount Arm Wall mount that allows an area or street light to mount on a 2-3/8" OD x 30" mast arm. 6" x 2-3/8" OD Upsweep Mast Arm Pole mount that allows an area or street light to mount on a 2-3/8" OD x 6" mast arm. (Also available in 1-5/8" OD size and 4' and 8' lengths). Spoke Arm Pole top or tenon mount arm extends either 8", 12", 15", 24", 30" or 36" and can include 1, 2, 3 or 4 arms. SMAWL T20 US2-5 DDB SMAWL T20 US2-5 GALV Galvanized SMACU T20 US2-5 DDB SMACU T20 US2-5 GALV Galvanized SMACS 29 T20-8 DDB SMACS 29 T20-8 GALV Galvanized Steel Parallel Mount Arm Pole top tenon mount that allows two area fixtures. (Also available in three light version). RCTMS DM2 T20 DDB (Add AS to end of DM2/DM3 to denote AS, MR, DSX, CSX drilling) Dark Bronze Aluminum Parallel Mount Arm Pole top tenon mount that allows two area fixtures. (Also available in three light version). RCTMA DM2 T20 DDB (Add AS to end of DM2/DM3 to denote AS, MR, DSX, CSX drilling) 4
Stock Poles Square Straight Steel Pole Offered in 16'-4", 20'-4", and 25'-4" 11 gauge drilled for two K-series fixtures at 180 with plugs in one of the drillings SSS 16 4C DM28 PL DDB SHAFT (16'-4") SSS 20 4C DM28 PL DDB SHAFT (20'-4") SSS 25 4C DM28 PL DDB SHAFT (25' 4") 20'-4" Square Straight Steel 2-3/8" Tenon 20'-4" 11 gauge with 2-3/8" tenon for mounting floodlights, bullhorns or area fixtures with a tenon slipfitter. SSS 20 4C T20 DDB SHAFT 30'-4" Square Straight Steel Pole 30'-5" 11 gauge drilled for two K-series fixtures at 180 with plugs in one of the drillings. SSS 30 5C DM28 PL DDB SHAFT Stock Anchor Bolts Product Description Catalog Number Price 3/4" x 18" Anchor Bolts Pole anchor bolts are 3/4" x 18" x 3" with 10" minimum galvanizing and 4" minimum threads with 10 threads/inch. ASTM F1554-55, and domestic. Recommended for all SSS 4" 11 gauge poles. AB18-0 (Includes a set of 4 bolts, 8 washers and 8 nuts.) ABSSS-4C (Includes AB18-0 AB18-0 anchor anchor bolts bolts and and template for for SSS SSS 4C poles) 4C poles) 3/4" x 30" Anchor Bolts Pole anchor bolts are 3/4" x 30" x 3" with 10" minimum galvanizing and 4" minimum threads with 10 threads/inch. ASTM F1554-55, and domestic. Recommended for all SSS 4" 7 gauge poles. AB30-0 (Includes a set of 4 bolts, 8 washers and 8 nuts.) ABSSS-4G (Includes AB30-0 anchor bolts and template for SSS 4G poles) 1" x 36" Anchor Bolts Pole anchor bolts are 1" x 36" x 4" with 12" minimum galvanizing and 6" minimum threads with 8 threads/inch. ASTM F1554-55, and domestic. Recommended for all SSS 5" 11 and 7 guage poles. AB36-0 (Includes a set of 4 bolts, 8 washers and 8 nuts.) ABSSS-5 (Includes AB36-0 anchor bolts and template for SSS 5C and 5G poles visit www.lithonia.com One Lithonia Way Conyers, Georgia 30012 Phone: 800.279.8041 Fax: 770.918.1209 www.lithonia.com 2014 Acuity Brands Lighting, Inc. All rights reserved. Rev. 3/14 Form No. 807.118 5