1/4/8CN Series Max. 6 I/min - 7 bar Premium performance for medium pressure applications FEATURING An economical multipurpose filter solution The CN Series utilizes a cast aluminium head and spin-on bowl and can be specified with Microglass lll or Ecoglass lll filter media. Maximum pressure 7 bar. Maximum flow 6 l/min. Excellent performance value from a globally proven, reliable medium pressure filter. Contact Information: European Product Information Centre Freephone: 8 27 27 374 (from AT, BE, CH, CZ, DE, EE, ES, FI, FR, IE, IT, PT, SE, S, U) filtrationinfo@parker.com Product Features: CN utilizes a cast aluminium head and bowl. Excellent fatigue pressure ratings. Maximum pressure 7 bar. Maximum flow 6 l/min. An economic multi-purpose filter solution. www.parker.com/hfde 1 FDHBU. FDHBU/1/4/8CN
1/4/8CN Series Features & Benefits Features 6 bar fatigue rating (eight times that of a spin-on) Diametral (side) seal between head and bowl Dust seal 4CN-2 meets automotive HF3 standard 1CN meets automotive HF2 standard Cast aluminium head Reinforced Microglass III replacement elements Complete performance data disclosure, electrical or electronic indicators available Coreless Ecoglass III replacement elements Advantages Ability to provide reliable service under tough cyclic operating conditions Can be utilised in applications where high pressure filters may have been only option Proven reliability in cyclic applications Reduced importance of bowl torque Prevents contamination from building up on bowl/head threads Automotive industry acceptance Low profile, lightweight and durable Multi-layered design produced high capacity and efficiency Wire support reduces pleat bunching, keeps performance consistent All pertinent information is provided in an easy-tocompare format Check element condition at a glance Right style for the application No metal content in element Reduced overall weight of % Easy compaction of used elements Conversion kits available: new bowl with permanent core Benefits Reduced downtime due to premature filter failures Reduced costs, better fit for the application No downtime, no leaks Performs with real world service Easier service, eliminates thread galling Satisfies specifications without need for further testing and/or approval Less weight, smaller envelop and cleaner appearance Great performance value Reliable performance throughout element life Reduces downtime, maximises element life No hidden deficiencies Easy selection of proper filtration Optimise element life, prevent bypassing Matches your system electrical connections Environmentally friendly disposal by incineration Lower element replacement costs Lower disposal cost Retrofit coreless design to housings already installed Typical Applications Compressor lube oil Off-line filter loops Machine tools (Automotive standard) Hydrostatic drive charge pumps Mobile equipment Pilot lines for servo controls Oil patch drilling equipment Injection moulding The Parker Filtration 1/4/8CN Series. This partial list of applications for Parker CN Series Filters has a common factor, the need for an economical, medium pressure range filter with excellent fatigue pressure ratings. Prior to the availability of the CN filter, applications such as those listed were restricted by limitations of a spin-on can, or forced into the higher-cost range of high pressure filters. The CN Series fills this gap and is now available with environmentally friendly Ecoglass III elements. 111 FDHBU/1/4/8CN FDHBU.
Specification Pressure ratings: Maximum allowable operating pressure: Rated fatigue pressure: 7 bar 6 bar Connections: Several threaded port options available, flange faced ports available on 8CN. Connection style Model 1CN 4CN 8CN BSPF(G) 1, 3 /4 1 1 /4, 1 1 /2 1 1 /2, 2 SAE 12, 16 16, 24 24, 32 ISO 6149 M27 M33 M42, M48 Metric 3-M 2 Filter housing: Head material aluminium. Bowl material hard anodized aluminium. Seal material: Nitrile or fluoroelastomer. Operating temperature range: Seal material Nitrile: -4 C to + C. Seal material : - C to +1 C. Bypass valve & indicator settings: Table following gives bypass valve and corresponding indicator setting. Bypass Indicator 1.7 bar 1.2 bar 2. bar Filter element: Degree of filtration: Determined by Multipass-test according to ISO 16889. Flow fatigue characteristics: Filter media is supported so that the optimal fatigue life is achieved (ISO 3724). Microglass III (available by request) Supported with epoxy coated metal wire mesh, end cap material reinforced composite and metal inner core. Collapse rating bar (ISO 2941). Ecoglass III Supported with plastic net, end cap material reinforced composite. No metal parts. Collapse rating bar (ISO 2941). Filter element can only be used together with bowl including Eco-adaptor. Note: Ecoglass III contributes to ISO 141 quality. Par-Gel: Water removal media absorbent copolymer laminate media with ability to remove free water from mineral based and synthetic fluids available for 4CN and 8CN. Indicator options: - visual M3. - electrical T1. - electronic F1(PNP). - electronic F2(NPN). For indicator details see catalogue section 6. Weights (kg): Model 1CN 1.1 1.6 4CN 2. 2. 8CN.6 6.9 Fluid compatibility: Suitable for use with mineral and vegetable oils, and some synthetic oils. For other fluids, please consult Parker Filtration. 1CN H I N 4CN H J N 8CN H J N F G L F G L G L F J I I M D M D M D C C C A B P A B P A B P Element removal clearance 6mm (2. ) 2.4 (1.) Nominal Hex E SAE - 4 Drain plug Element removal clearance 6mm (2. ) 2.4 (1.) Nominal Hex E SAE - 4 Drain plug Element removal clearance 6mm (2. ) 2.4 (1.) Nominal Hex E SAE - 4 Drain plug Dimensions in mm (inch) Model A B C D E F G H I J L M* N P 1CN 4CN 8CN 16.6 (6.17) 17.8 (6.73) 28.9 (11.6) 2.7 (9.87) 262.4 (.33) 41.6 (1.81) 46. (1.83) 62. (2.44) 77.7 (3.6) 2.4 (1.9) 32.6 (1.28) 49. (1.9) 71.1 (2.8) 7.2 (4.22) 124.8 (4.91) 8.9 (3.38) 127. (.) 18.7 (6.2) 73.2 (2.88) 111. (4.37) 82.6 (3.2) 82.6 (3.2) 121.9 (4.8) 11.4 (.96) 38.1 (1.) 62. (2.44) 1.6 (4.) 22.9 (.9) 31.8 (1.2) 41.1 (1.62) 42.9 (1.69) 8.8 (2.32) 79.4 (3.12) 36.6 (1.44) 6.2 (2.37) 41.3 (1.63) 3 3 69 4xM6-1.x7.9 deep 4xM8-1.2x13 deep 4xM8-1.2x16 deep -27 Nm 7-68 Nm 8-9 Nm Note: add 4mm for T and F indicators 112 FDHBU. FDHBU/1/4/8CN
1/4/8CN Series 8CN Flange Face Details (SAE 2 3-M) Flange face mounting holes M12-1.7 x 22 deep 21.4 42.8 38.9 77.8 Pressure Drop Curves With 1.7 bar bypass the recommended initial pressure drop is max. bar. With bypass the recommended initial pressure drop is max 1. bar. If the medium used has a viscosity different from 3 cst, pressure drop over the filter can be estimated as follows: The total Dp = housing Dph + (element Dpe x working viscosity/3). 1CN-1 Elements 1CN Empty Housing 1 2 2 1 2 2 1. QE 1. 1... 2QE QE 4 6 1 QE 8 1... 3/4 Nominal Port Size 4 6 1 Nominal Port Size 8 1 1CN-2 Elements 1 2 2 1. 2QE 1.. QE QE QE 1. 4 6 8 113 FDHBU/1/4/8CN FDHBU.
Pressure Drop Curves 4CN-1 Elements 4CN Empty Housing 3 4 6 7 1. 2QE QE 1. QE. QE 2 1 p (bar) 4 6 8 1. 2 1 Nominal Port Size 1. 1 1 /4 Nominal Port Size 1. 11/2 Nominal Port Size. 1 2 3 4CN-2 Elements. 1 2 3 3 3 4 6 7 2 1. 2QE 1. QE 1. QE. QE 1 2 3 8CN-1 Elements 8CN Empty Housing 26 3 79 6 132 19 2 3 6 9 1 1 19 2 1. 2QE QE 1. 1. QE. QE. 3 4 6 1 1... 11/2 Nominal Port Size 2 Nominal Port Size 3 4 6 1 8CN-2 Elements 26 3 79 6 132 19 2 1. 1. 1 2QE QE. QE QE. 3 4 6 114 FDHBU. FDHBU/1/4/8CN
1/4/8CN Series Element Service A. Stop the system s power unit. B. Relieve any system pressure in the filter line. C. Drain the filter bowl if drain port option is provided. D. Loosen and remove bowl. E. Remove element by pulling downward with a slight twisting motion and discard. F. Check bowl o-ring and anti-extrusion ring for damage and replace if necessary. G. Lubricate element o-ring with system fluid and place on post in filter head. H. Install bowl by rotating counter clockwise and tighten to specified torque. 1CN -27 Nm (1-ft. lbs) 4CN 7-68 Nm (42-ft. lbs) 8CN 8-9 Nm (6-7ft. lbs) I. Confirm there are no leaks after powering the system. 3 2 CN Filters Parts List Index Description 1 Head 2 Indicators M3-visual auto reset: 1.2 bar M3-visual auto reset: 2. bar 3 T1-electrical: 1.2 bar c/w DIN 436 connector T1-electrical: 2. bar c/w DIN 436 connector F1-electronic PNP with 4 LEDs: 1.2 bar F1-electronic PNP with 4 LEDs: 2. bar F2-electronic NPN with 4 LEDs: 1.2 bar F2-electronic NPN with 4 LEDs: 2. bar 4 Bypass valve 1.7 bar assembly assembly Element (see replacement element part numbers) 6 Bowl Single length with drain Single length with reusable core and drain Single length without drain Double length with drain Double length with reusable core and drain Double length without drain 7 Bowl and dust seal Nitrile 8 Drain plug: SAE-4 Nitrile 4 1 7 6 8 11 FDHBU/1/4/8CN FDHBU.
Ordering Information Standard products table Part numbers 1CN1QEVT1G164 1CN1QEVM3G164 1CN1QEVT1G164 1CN1QEVM3G164 1CN2QEVT1G164 1CN2QEVM3G164 1CN2QEVT1G164 1CN2QEVM3G164 4CNQEVT1G244 4CNQEVM3G244 4CN1QEVT1G244 4CN1QEVM3G244 4CN1QEVT1G244 4CN1QEVM3G244 4CNQEVT1G244 4CNQEVM3G244 4CN2QEVT1G244 4CN2QEVM3G244 4CN2QEVT1G244 4CN2QEVM3G244 8CN1QEVT1G324 8CN1QEVM3G324 8CN1QEVT1G324 8CN1QEVM3G324 8CN2QEVT1G324 8CN2QEVM3G324 8CN2QEVT1G324 8CN2QEVM3G324 Supersedes F31CN1RQETW3C2C219 F31CN1RQEM2C2C219 F31CN1RQETW3C2C219 F31CN1RQEM2C2C219 F31CN2RQETW3C2C219 F31CN2RQEM2C2C219 F31CN2RQETW3C2C219 F31CN2RQEM2C2C219 F34CN1RQETW3E2E219 F34CN1RQEM2E2E219 F34CN1RQETW3E2E219 F34CN1RQEM2E2E219 F34CN1RQETW3E2E219 F34CN1RQEM2E2E219 F34CN2RQETW3E2E219 F34CN2RQEM2E2E219 F34CN2RQETW3E2E219 F34CN2RQEM2E2E219 F34CN2RQETW3E2E219 F34CN2RQEM2E2E219 F38CN1RQETW3F2F219 F38CN1RQEM2F2F219 F38CN1RQETW3F2F219 F38CN1RQEM2F2F219 F38CN2RQETW3F2F219 F38CN2RQEM2F2F219 F38CN2RQETW3F2F219 F38CN2RQEM2F2F219 Flow (l/min) 8 8 8 8 1 1 18 18 26 26 28 28 3 3 37 37 4 4 3 3 6 6 Model number 1CN 1CN 1CN 1CN 1CN 1CN 1CN 1CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 4CN 8CN 8CN 8CN 8CN 8CN 8CN 8CN 8CN Element length Media rating (µ) Note: Filter assemblies ordered from the product configurator on next page are on extended lead times. Where possible, please make your selection from the table above. Seals Indicator Bypass settings Ports Replacement elements 9367Q 9367Q 93671Q 93671Q 93674Q 93674Q 9367Q 9367Q 93677Q 93677Q 93678Q 93678Q 93679Q 93679Q 936711Q 936711Q 93661Q 93661Q 936712Q 936712Q 93662Q 93662Q 93671Q 93671Q 936718Q 936718Q 936719Q 936719Q Part Number S4449 S44 S4447 S4448 S448 S449 CN Series Seal its Description NITRILE SEAL IT 1CN FLUOROELASTOMER SEAL IT 1CN NITRILE SEAL IT 4CN FLUOROELASTOMER SEAL IT 4CN NITRILE SEAL IT 8CN FLUOROELASTOMER SEAL IT 8CN 116 FDHBU. FDHBU/1/4/8CN
1/4/8CN Series Ordering Information (cont.) Product Configurator Box 1 4CN Box 1 Box 2 2 Model Small size MP filter, T-port Medium size MP filter, T-port Large size MP filter, T-port Box 3 Box 3 QE 1CN 4CN 8CN Box 4 V Box 2 Length Box M3 Filter type 1 2 Degree of filtration Element media Glass fibre Media code Ecoglass III element 2QE QE QE QE Note: When using Ecoglass III elements a bowl with reusable Eco-adaptor is required. Consult Parker. Filter assemblies with Microglass III elements are available by request. WR: Water removal media. Box Box 6 Indicator No indicator port indicator indicator Plugged Electronic 4 LED, PNP, N.O. Electronic 4 LED, NPN, N.O. Electronic 4 LED, PNP, N.C. Electronic 4 LED, NPN, N.C. Box 8 Options Options Standard drain port on bowl ATEX certified* (Category 2, non-electrical equipment) N M3 T1 P F1 F2 F3 F4 4 Bypass valve 1.7 bar Note 1*: For ATEX classified filters add EX after the code. ATEX certified filters with electrical indicator are available on request. indicators are classified as Category 2, non electrical equipment. Filter assemblies with EX code will be supplied with a dedicated name plate. Pls consult Parker Filtration for any questions related to the classification of our products. EX Box 6 Bypass valve Indicator 1.2 bar 2. bar Box 7 G24 Box 8 4 Highlights ey (Denotes part number availability) Item is standard Item is standard green option Item is semi standard Item is non standard Ecoglass III elements ( seals) Model 2QE QE QE QE 1CN-1 936698Q 936699Q 9367Q 93671Q 1CN-2 93672Q 93673Q 93674Q 9367Q 4CN-1 93676Q 93677Q 93678Q 93679Q 4CN-2 9367Q 936711Q 93661Q 936712Q 8CN-1 936713Q 936714Q 93662Q 93671Q 8CN-2 936716Q 936717Q 936718Q 936719Q Replacement element part numbers for conventional assemblies Elements with nitrile seals Elements with seals Conversion bowl assembly (to retrofit existing CN filter housings to use coreless elements) Model 2Q Q Q Q Model 2Q Q Q Q WR 93678 93679 93676 936761 1CN-1 coreless element bowl assembly 1CN-2 coreless element bowl assembly 4CN-1 coreless element bowl assembly 4CN-2 coreless element bowl assembly 1CN-1 92893Q G441Q 928934Q 1CN-2 92893Q G4169Q 92892Q 4CN-1 926696Q G448Q 92683Q 4CN-2 926697Q G4167Q 926837Q 93367Q 93368Q 9399Q 93118Q 1CN-1 9326Q G4189Q 932612Q 1CN-2 932616Q G419Q 932618Q 4CN-1 926716Q G4191Q 926836Q 4CN-2 926717Q G4192Q 926838Q 93369Q 9337Q 93Q 93119Q - - 931412 931414 936763 936764 8CN-1 coreless element bowl assembly 8CN-2 coreless element bowl assembly 8CN-1 93266Q 8CN-2 932662Q 93267Q 932663Q 93268Q 932664Q 929899Q 929923Q 8CN-1 93269Q 8CN-2 93266Q 93266Q 932666Q 832661Q 932667Q 92993Q 929927Q 931416 931418 123 123 123 123 Water Removal WR G When filter includes a bypass valve but not an indicator, code denotes bypass setting. Box 4 Seal type Seal material Nitrile V B Box 7 Filter connection Ports 1CN: Thread G 3 /4 Thread G1 Thread SAE 12 Thread SAE 16 Thread M27, ISO6149 4CN: Thread G1 1 /4 Thread G1 1 /2 Thread SAE 16 Thread SAE 24 Thread M33, ISO6149 8CN: Thread G1 1 /2 Thread G2 Thread SAE 24 Thread SAE 32 Thread M42, ISO6149 Thread M48, ISO6149 SAE flange 2" 3-M G12 G16 S12 S16 M27 G G24 S16 S24 M33 G24 G32 S24 S32 M42 M48 R32 ßx(c)=2.% 6 Degree of filtration Average filtration beta ratio ß (ISO 16889) / particle size µm [c] ßx(c)= ßx(c)=7 ßx(c)= ßx(c)= ßx(c)= % efficiency, based on the above beta ratio (ßx) 9.% 6 11 98.7% 4. 8. 17 99.% 9 18 99.% 6 Please note the bolded options reflect standard options with a reduced lead-time of (4) weeks or less. Consult Parker Filtration on all other lead-time options. 99.9% 4. 7 12 22 Metal free Ecoglass III 2QE QE QE QE Nominal flow (l/min) for filter assembly at viscosity 3cSt Housing, port size 1CN-1, G1 1CN-2, G1 4CN-1, G1 1 /2 4CN-2, G1 1 /2 8CN-1, G2 8CN-2, G2 2QE 3 6 8 1 18 QE 3 7 1 3 4 QE 8 18 28 37 3 QE 8 26 3 4 6 * s are available under various registered trademarks, including Viton (a registered trademark of DuPont) and Fluorel (a registered trademark of 3M) 117 FDHBU/1/4/8CN FDHBU.