I N T E R N A L S E C U R I T Y

I N T E R N A L S E C U R I T Y E Q U I P M E N T

Founded by Walter E. Wisbey in the late 1940ʼs as specialists in surgical instrument repair, the company rapidly developed a comprehensive engineering facility. The skills developed in the medical and surgical fields were quickly utilised to design and manufacture a range of miniature illuminated inspection probes for viewing inaccessible areas, without resorting to the expense of an endoscope. This range soon grew to encompass a variety of rigid telescopic arms and mirrors, popular with customs and excise personnel for building and vehicle checks. Today NIC products are used worldwide by security, Customs and Excise Rummage Teams, Military and Police organisations. C-NIC TUM-C A robust wheeled trolley under vehicle mirror, specifically designed and developed with security personnel in mind, for searching the underside of vehicles. A large unbreakable polycarbonate mirror provides a wide angle image, illuminated by a powerful 12 volt 8 watt fluorescent tube. The T handle, which assists in tilting the mirror, is telescopic and folds away when not in use. Power is supplied by rechargeable batteries, and a charging system for 110v or 240V is included. A glass convex mirror is available to special order. C-NIC TUM-C with UK Charger. part no. SE001800 NATO stock number. 5120-99-772-8123 C-NIC TUM-C with Euro Charger. part no. SE002000 NATO stock number. 5120-99-665-6235 C-NIC TUM C with 110V usa charger. part no. SE002600 C-NIC TUM C glass convex mirror only. part no. SE011808 SAFE-C part no. SE000600 NATO stock number. 5120-99-148-3692 2 An illuminated security mirror to assist in vehicle, boat or aircraft search. The Safe-C incorporates a telescopic handle measuring just 20cm when shut, yet extends to 80cm when in use. An automatic on/off switch provides illumination to the mirror offering excellent vision day or night. The Safe-C mirror is compact enough to be carried in your pocket. (Accepts 2 x AAA batteries.)

C-NIC TIM. part no. SE000100 NATO stock number. 5120-99-723-8872 A purpose made telescopic handle which will accept a variety of mirrors. When closed, the four section handle measures just 480mm, and will extend to a maximum length of 1.6m. A revolutionary twist and lock mechanism enables the TIM to be locked at any length. Manufactured from anodised aluminium, the TIM is the most rigid telescopic arm available. C-NIC TIM-ILL. part no. SE000200 NATO stock number. 5120-99-484-3306 As the TIM but fitted with a D cell torch, useful during searches carried out in low light levels. C-NIC TOM. part no. SE000300 NATO stock number. 5120-99-236-1592 A D cell torch fitted to a rigid steel arm. Overall length 0.5 m. FROM LEFT TO RIGHT: TOM, TIM-ILL and TIM. THE FOLLOWING MIRRORS ARE SUITABLE FOR USE WITH THE TIM, TIM-ILL AND TOM PRODUCTS: SM-38-P. part no. SE001700 NATO stock number. 5120-99-184-8446 38mm diameter plano screw fitting mirror SM-65-P. part no. SE001400 NATO stock number. 5120-99-151-2535 65mm diameter plano screw fitting mirror. SM-65-PX. part no. SE001500 NATO stock number. 5120-99-275-5024 65mm diameter plano screw fitting mirror with protective ring around mirror. SM-R-P. part no. SE000800 NATO stock number. 5120-99-961-2867 65mm x 115mm plano screw fitting mirror. SM-100-P. part no. SE001300 NATO stock number. 5120-99-749-2176 100mm diameter plano screw fitting mirror. SM-140-P. part no. SE001100 NATO stock number. 5120-99-593-8796 140mm diameter plano screw fitting mirror. SM-140-C. part no. SE001000 NATO stock number. 5120-99-324-0036 140mm diameter wide angle screw fitting mirror. SM-140-SS. part no.se001200 NATO stock number. 5120-99-833-0991 140mm diameter plastic screw fitting mirror. SM-140-CX. part no. SE000400 140mm diameter wide angle screw fitting mirror. With protective ring around mirror. 3

THE ENDOSCOPE SEARCH KITS. Two search kits designed to aid the search of cars, buildings and vessels. Both portable, and come packed in foam lined fitted cases and include a fixed side viewing endoscope - overall diameter 12mm, working length 300mm illuminated by a powerfull 10 W halogen lamp. Both come complete with a 12V 2.3 Ah rechargeable power pack and battery charger. Both kits arrive ready to use with spare lamps. ENDOSCOPE KIT. part no. SE009900 NATO stock number. 6665-99-595-5282 1 Rigid endoscope 12mm diameter 300mm long 12V. 1 Power pack for endoscope. 1 Battery charger for power pack. 1 Belt and pouch for power pack. 1 Spare bulb 12V 10W for endoscope. 1 Foam lined fitted case. ENDOSCOPE SEARCH KIT.part no. SE009800 NATO stock number. 6665-99-317-5218 1 Rigid endoscope 12mm diameter 300mm long 12V. 1 Power pack for endoscope. 1 Battery charger for power pack. 1 Belt and pouch for power pack. 1 TIM telescopic inspection arm. 1 TOM rigid torch arm. 1 SM-R-P 65 x 115 plano screw fitting mirror. 2 SM-140-C 140mm diameter wide angle screw fitting mirror. 1 SM-65-P 65mm diameter plano screw fitting mirror. 1 Spare bulb 12V 10W for endoscope. 1 Foam lined fitted case. 4

COMPREHENSIVE SEARCH KIT. A comprehensive yet portable kit, to aid in the search of vehicles and buildings. The kit contents are supplied in a fitted foam lined case. Components such as a fully rechargeable 12W 12V twin tube fluorescent hand lamp, and rigid 12mm diameter lamp lit endoscope are included. COMPREHENSIVE SEARCH KIT. part no. SE009000 NATO stock number. 6665-99-395-8306 2 Battery handle-medium (accepts 2 x C cells.) 1 Illuminated magnifier head with X8 lens. 1 MES lamp holder and bulb, converts battery handle to torch. 1 Rigid MES bulb light probe 380mm long. 1 Stayput flexible MES bulb light probe. 1 Cold light MES bulb light probe 380mm long. 1 7mm diameter curved light probe 250mm long. 1 3mm diameter light probe 50mm long. 1 3mm diameter light probe 150mm long. 1 3mm diameter light probe 200mm long. 1 5mm bore viewing sleeve 150mm long - to fit 3mm light probe 150mm long. 1 10mm bore viewing sleeve 50mm long - to fit 3mm light probe 50mm long. 1 10mm bore viewing sleeve 200mm long - to fit 3mm light probe 200mm long. 1 Angled extension for probes. 1 Straight extension for probes 380mm long. 1 65mm Round articulated mirror to fit MES probes. 1 38mm Round articulated mirror to fit MES probes. 1 Recovery magnet. 1 Accessory holder-large, adapts magnet to fit MES probes. 1 TIM telescopic inspection arm. 1 TOM rigid torch arm. 2 SM-R-P 65 x 115 rectangular plano screw fitting mirror to fit TIM & TOM. 3 SM-140-C 140mm diameter wide angle screw fitting mirror to fit TIM & TOM. 2 SM-65-P 65mm diameter plano screw fitting mirror to fit TIM & TOM. 1 12W 12V Hand lamp rechargeable 240V. 1 Rigid endoscope 12mm diameter 300mm long 12V - powered by handlamp. 2 Angled military torch. 1 Spare bulb box containing: 2 Bulb for 3mm probe (exposed filament.) 2 Bulb for MES probes. 2 Bulb for 7mm probes. 1 Bulb 12V 10W for endoscope. 1 Fitted case. PART NUMBERS: IE000400 IE000100 IE001700 IE002100 IE002400 IE002600 IE005400 IE004100 IE004300 IE004400 IE003900 IE004600 IE004900 IE002000 IE002300 IE000800 IE000900 IE001800 IE001600 SE000100 SE000300 SE000800 SE001000 SE001400 SE002100 SE002203 SE002500 SE010501 IE005000 IE005800 IE005900 RS1576980 SE019001 5

MINIATURE INSPECTION KIT. A range of miniature illuminated search probes, ideal for the inspection of suspect packages and devices. The kit allows for thorough examinations to be carried out through small holes and apertures. The kit comes housed in a foam lined carry case and with a kit of spare lamps. MINIATURE INSPECTION KIT. part no. IE008800 NATO stock number. 6665-99-671-5174 2 Battery handle-medium (accepts 2 x C cells.) 1 Illuminated magnifier head with X8 lens. 1 Stayput flexible MES bulb light probe. 1 Fully flexible MES bulb light probe. 1 Cold light MES bulb light probe 380mm long. 1 7mm diameter curved light probe 75mm long. 1 7mm diameter curved light probe 150mm long. 1 7mm diameter curved light probe 250mm long. 1 3mm diameter light probe 50mm long. 1 3mm diameter light probe 150mm long. 1 3mm diameter light probe 200mm long. 1 10mm bore viewing sleeve 50mm long - to fit 3mm light probe 50mm long. 1 10mm bore viewing sleeve 150mm long - to fit 3mm light probe 150mm long. 1 10mm bore viewing sleeve 200mm long - to fit 3mm light probe 200mm long. 1 Straight extension for probes 380mm long. 1 65mm Round articulated mirror to fit MES probes. 1 38mm Round articulated mirror to fit MES probes. 1 Eliptical mirror-small to fit 7mm probes. 2 26mm Round mirror. 1 19mm Round mirror. 1 Recovery magnet. 2 Accessory holder-large, adapts 26mm and 19mm mirrors and recovery magnet to MES probes. 2 Accessory holder-small, adapts 26mm and 19mm mirrors and recovery magnet to 7mm probes. 1 Spare bulb box containing: 2 Bulb for 3mm probe (shrouded filament.) 2 Bulb for MES probes. 2 Bulb for 7mm probes. 1 Fitted case. PART NUMBERS: IE000400 IE000100 IE002400 IE002500 IE002600 IE005200 IE005300 IE005400 IE004100 IE004300 IE004400 IE004600 IE004800 IE004900 IE002300 IE000800 IE000900 IE001200 IE001400 IE001500 IE001800 IE001600 IE006000 SE010501 IE005100 IE005800 IE005900 IE018801 6

TOOLKITS. Two tool kits, designed to assist during search operations. These kits comprise of a range of high quality tools, laid out in purpose foam cut cases. The clearly laid out case ensures that the contents may be checked at a glance. These search tool kits are specifically designed to be used with the comprehensive search kit (SE009000). Custom designed tool kits, to suit customers specific search requirements may also be made up. Please contact our sales teams for details. COMPREHENSIVE SEARCH TOOLKIT. An extensive range of tools, designed to assist in penetrating all aspects of buildings, vehicles and other areas where suspect devices may be hidden. The kit includes a cordless power drill, with a selection of drill bits and a heavy duty fluorescent handlamp. Supplied in 2 cases. CUSTOMS RUMMAGE KIT. A reduced kit, with a wide range of precision tools and inspection mirrors, suited especially for vehicle searches. Supplied in 1 case. COMPREHENSIVE SEARCH TOOLKIT. part no. TK000200 2 Insulation tape. 1 3m Steel measuring tape. 1 Trimming knife, retractable, with spare blades. 1 Linoleum knife. 1 Pair of scissors. 1 Self grip universal pliers. 1 Combination pliers, 180mm. 1 Diagonal side cutting pliers 160mm. 1 Long nose radio pliers, 200mm. 1 Water pump pliers, slip joint. 1 Tack lifter. 1 Cold chisel 19mmx200mm. 1 Wrecking bar 19x600. 1 Tinman shears, straight 300mm. 1 Hand nibbler 250mm. 1 Bolt cutter 600mm, 8mm ht steel. 1 Phillips No.1 screwdriver. 1 Phillips No.2 screwdriver. 1 Phillips No.3 screwdriver. 1 Phillips N0.4 screwdriver. 1 Slotted head 3mm screwdriver. 1 Slotted head 6mm screwdriver. 1 Slotted head 10mm screwdriver. 2 HSS drill bits 5mm. 2 HSS drill bits 10mm. 2 HSS drill bits 12mm. 1 Flat drill bit 19mm. 1 Flat drill bit 13mm. 1 Flat drill bit 10mm. 1 Masonry drill bit, 10mmx300mm. 1 Hexagonal wrench set, imperial. 1 Hexagonal wrench set, metric. 1 Wrench adjustable 150mm. 1 Wrench adjustable 300mm. 1 Strap wrench 50-300mm. 1 Padsaw and blades. 1 Mini saw and 10 blades. 2 Self grip forceps. 1 450g Claw hammer. 1 1.8kg Club hammer. 1 Centre punch. 1 Pair of tweezers. 1 Releasing fluid. 1 Socket set, 1/2 drive metric and imp sizes. 1 Cordless drill, 1/2 chuck, 2 batteries 14.4v. 1 Fluorescent handlamp with charger. 1 Pair of leather gloves. 1 Nylon cord. 2 Cases with foam inserts. CUSTOMS RUMMAGE KIT. part no. TK000100. 1 3/8 Socket and drive kit 1 Hexagonal wrench set, metric and imperial. 1 Combination spanners, metric and imperial. 1 Door trim removal tool. 1 Telescopic inspection arm, fitted with 65mm mirror. 1 22mm Dental mirror. 1 Adjustable wrench 12x300mm. 1 Wrecking bar 16x450mm. 1 Safety torch suitable for zone 1. 1 Slotted head 8mm screwdriver 400mm. 1 Slotted head 6.5mm screwdriver 400mm. 1 Case. 1 Foam insert. 7

I N T E R N A L S E C U R I T Y E Q U I P M E N T FOR MORE INFORMATION: Please contact us at: EN 46001: APPROVED ISSUE 2 Gladstone Road, Folkestone, Kent, CT19 5NF Telephone: +44 (0) 1303 851022 Fax: +44 (0) 1303 850155 email: sales@nicltd.co.uk www.nicltd.co.uk