Table of Contents General Notes...2 BRAKE DRUMS CentriFuse Warranty..................................... 3 Genuine CentriFuse Advantages.................. 4 CentriFuse Lite Advantages...................... 5 Brake Drum Mounting Procedures................. 6 Brake Drum Mounting Problems...7 Recognizing and Correcting Braking Problems....8 Drum Problems and Conditions................... 9- Drum Back / Band to Drum Number................ 2 Specifications List by Part Number...3 Specifications List by Brake Size....4-5 Part Number Cross Reference.................... 6 CentruCast Part Number Cross Reference.................... 7 Warranty..................................... 8 Specifications List by Brake Size....9 Hub & Drum Assembly Components.................................. 20 CentriSet Trailer Hub Systems....2 CENTRIFUSE HUB & DRUM ASSEMBLIES Hub Piloted 8 Hole Front & Drive Axle applications... 22 Trailer Axle Applications......................... 23 Hub Piloted 0 Hole Front & Drive Axle Applications... 23 Trailer Axle Applications......................... 25-26 DCN Assemblies Front & Drive Axle Applications... 27 Trailer Axle Applications......................... 28 CENTRUCAST HUB & DRUM ASSEMBLIES Hub Piloted 8 Hole Front, Drive & Trailer Axle Applications... 29 Hub Piloted 0 Hole Front & Drive Axle Applications... 30 Trailer Axle Applications......................... 3 DCN Assemblies Front & Drive Axle Applications... 32 Trailer Axle Applications......................... 33 Low Platform Trailer Applications....34 FASTENERS Wheel Bolts...36 Wheel Nuts.......................................................... 37
General Notes IMPORTANT Avoid mixing wheels or hub and bolt assemblies of different mounting systems with common bolt patterns. Examples:. U.S. hub piloted (22mm wheel bolts) with 8 hole 275mm ISO (20mm wheel bolts). 2. DCN stud piloted with 0 hole hub piloted. Inner Cap Nuts Inner cap nuts for aluminum inner dual DCN wheels must be high-strength nuts made from material equivalent to SAE Grade 8 and should conform to industry part number 5988. These nuts are not available from Motor Wheel. ABBREVIATIONS DCN Double Cap Nut WHEEL USAGE: CLN Cone Lock Nut The abbreviations for Wheel Usage are: Right hand S For use with steel wheels LH Left hand A For use with aluminum wheels ABS Loc ABS ring face location S, A For use with steel or aluminum wheels Footnotes ( sections) The letters in the Footnotes column have the following meaning: K 0 / 8.75 L Lube fill: /4-8 NPTF - Iron Hubs, 9/6-8 0-ring Seal -Alum. Hubs M 5.9 offset Q 5.44 offset T For axles with 8.62 linings located at the 7 brake location U For axles with 8.62 linings located inboard of the 7 brake location V For industry axles except Meritor TN or TB W For Meritor TN or TB axles only Y Assembly includes an unbalanced drum Z 80-tooth ABS rings for use with tire diameters 5 and 7.5 ORDERING SUFFIXES OPTIONAL PART NUMBER SUFFIXES FOR MOTOR WHEEL PRODUCTS Bearing Cup Suffix Added to Part Number for Means T Hub Assy, Hub+Drum Assy Timken case-hardened bearing cups TH Hub Assy, Hub+Drum Assy Timken thru-hardened bearing cups H Hub Assy, Hub+Drum Assy Hyatt / General Bearing Corp. cups SC Hub Assy, Hub+Drum Assy Stemco-supplied bearing cups Hub Color W Hub Assy, Hub+Drum Assy White Hub Paint (Default is black). Note: CentriFuse drums are always supplied BALANCED Full-Cast Drum Balance Assembly Nuts Z Trailer Hub+Drum Assy s Use Balanced Full-Cast Drum Note: Default is 2 disposable nuts M Full-Cast Hub+Drum Assy CLN (2) usable wheel nuts installed M Inboard Hub+Drum Assy DCN (20) usable wheel nuts installed (only Lowboy assys) M Hub+Drum Assy CLN or DCN (0) usable wheel nuts installed M8 Hub+Drum Assy CLN (8-Hole) (8) usable wheel nuts installed Examples: 480900 Z M= Hub+Drum 480900 with Balanced Drum & 0 usable nuts 40050 T W = 40050 White Hub Assembly with Timken case-hardened cups 2 2
ums rvice tions Index e Size e Size Band ber ence ence ages ages anty anty lies ners xico vice CentriFuse and CentriFuse CentriFuse Lite Lite Brake Drum CentriFuse 0 Year Warranty Brake Drum 0 Year Warranty 0 Year Warranty Motor Wheel warrants to the user to replace each on-highway 6.5 x 7 Motor CentriFuse Wheel Lite warrants brake to the drum user which that it becomes will replace unserviceable each CentriFuse due within 5 to and workmanship 0 years 6-/2 of truck or date trailer material, of manufacture brake within drum 0 manufactured due years to of workmanship date after of manufacture January or material,, 994 or before which before becomes the the 0.20 0.20 unserviceable wear Motor Wheel warrants to the user to replace each wear due 5 and to workmanship or material, breaks before ten years from date of manufacture, limit is reached whichever occurs first. or before 6-/2 the 0.20 Truck wear or Truck/Trailer limit is reached Brake whichever Drum manufactured occurs first. This after warrant January shall, not apply 994, if failure which is becomes due to other unserviceable brake components, due to lack workmanship of required or maintenance, material, or misuse, This warranty breaks damage is void before by accident, if the product ten years improper is altered from date installation, or modified, of manufacture, or adjustment or is not or before of properly braking the system. maintained in accordance with industry maintenance standards. Also, it will 0.20 not wear limit is reached whichever occurs first. This warranty shall not Motor cover failure Wheels due obligation to other under components, this warranty lack of is required limited to maintenance, replacing any misuse, CentriFuse brake damage drum apply by accident, that if failure proves, improper is due upon to inspection installation/ other brake of adjustment failed components, parts of and, braking lack if deemed of systems, required necessary, or associated other abnormal maintenance, vehicles or severe and misuse, their operating maintenance damage conditions. by records, accident, to be improper defective within installation the applicable or provisions adjustment of this warranty. of braking Replacement systems. products will be shipped FOB our factory. Motor Wheel s obligation under this warranty is limited to replacing a CentriFuse Parts Lite brake on Motor which drum Wheel s a that warranty proves, obligation is upon claimed under inspection must, this upon warranty of failed request, parts is limited, be and, returned ifupon deemed to inspection place of manufacture necessary, of failed associated or to our authorized parts, vehicles, and representative their maintenance with transportation records, to to charges replace, be defective prepaid. F.O.B. our within factory, the applicable any CentriFuse provisions of Brake this warranty. Drum as Replacement shall be returned products to us will or be THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, our shipped authorized FOB our factory. representative Parts on with which transportation a warranty is charges claimed must, prepaid, upon INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS and FOR which A PARTICULAR request, our be examination returned PURPOSE, to APPLICATION place discloses of manufacture to OR be USE. defective. IN or NO to our EVENT authorized SHALL representative MOTOR WHEELS LIABILITY with transportation EXCEED THE charges ORIGINAL prepaid. PRICE OF THE PRODUCT, NOR SHALL MOTOR WHEEL THIS BE WARRANTY LIABLE FOR SPECIAL, IS IN LIEU INCIDENTAL OF ALL OTHER OR CONSEQUENTIAL WARRANTIES, DAMAGES. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, FITNESS FOR A PARTICULAR PURPOSE, APPLICATION OR USE. IN NO EVENT APPLICATION SHALL MOTOR OR WHEEL S USE. IN LIABILITY NO EVENT EXCEED SHALL THE MOTOR ORIGINAL WHEEL S PRICE OF THE LIABILITY PRODUCT, EXCEED NOR SHALL THE ORIGINAL MOTOR WHEEL PRICE BE OF LIABLE THE CENTRIFUSE FOR SPECIAL, INCIDENTAL BRAKE OR DRUM, CONSEQUENTIAL NOR SHALL MOTOR DAMAGES. WHEEL BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. 830 RONDA DRIVE CANTON, MICHIGAN 4887 U.S.A. 830 RONDA www.motorwheelcvs.com DRIVE CANTON, MICHIGAN 4887 U.S.A. www.motorwheelcvs.com Form #4-002 Form #4-005 3
Quality Lightweight With CentriFuse brake drums, breakage is not an option. The superior quality drum construction ensures exceptional drum strength. Combine this with 40% better lining life and over 70 years of reliable service to the trucking industry, and you ll know only CentriFuse offers you the safety, low cost of operation, and proven performance your business requires. Computer aligned mounting virtually eliminates runout Permanently bonded steel shell provides proven resistance to heat cracks Precision balanced to ensure a smooth ride Lightweight design improves fuel efficiency and increases revenueproducing payload Patented alloy provides superior heat absorption, resulting in reduced fade & wear Safety conscious fleets SPECIFY Quality Lightweight 4
25906 MW 2/23/07 :32 AM Page Quality Lightweight IDEAL APPLICATIONS Ideal for weight sensitive applications such as: Refrigerated trailers, tank trailers, bulk haulers or fleets looking to increase their payload and fuel efficiency! Published Weight of Weight Comparable of *WEIGHT SAVINGS* over cast drums Comparable 6.5x7 CentriFuse Lite Weight Savings Part Number 6.5x7 Weight Per Truck Per Trailer Typical Part Number Savings Per Tandem Tandem Tractor/Trailer Standard Full Cast 2 Tandem Tandem Tractor/Trailer Drum Axles Axles Combination CentriFuse Lite 84 Per Drum Truck Axles Trailer Combination ConMet CastLite 00 2 48 48 96 Genuine 90 6 24 24 48 Meritor X30 Standard Full Cast 2 94 28 8 72 2 72 2 44 224 Genuine Meritor X30 94 90 0 22 40 88 88 40 76 80 CentriFuse ConMet CastLite Lite 00 84 6 28 642 2 64 224 28 20,000 lb. axle rating Save up to 224 pounds per tractor/trailer when you choose CentriFuse Lite! Same great safety, balance, and reliability as Genuine CentriFuse with less weight! Backed by a 0 year written warranty Developed with over 70 years of proven technology and experience Combine with other lightweight weight savings! components for even more Meritor X30 is a trademark of ArvinMeritor, Inc. CastLite is a registered trademark of Consolidated Metco, Inc. SPECIFY CENTRIFUSE LITE 5
TECH BRAKE DRUM MOUNTING PROCEDURES FOR HUB PILOTED 8 AND 0 HOLE WHEEL END SYSTEMS Locate one hub pilot pad at twelve o clock position. 2 Before mounting wheels, be sure drum is properly positioned on raised step of pilot pad. 3 With wheels square to hub, mount inner and outer wheels as far back on the pilot pad as possible. Be sure both tire valve stems are accessible. 4 Apply two drops of oil on leading threads of studs and between nut body and flange. Avoid getting oil on face of nut, wheels, or brake drum. 5 Finger tighten nuts on top two positions on an 8 hole wheel; top and bottom positions on a 0 hole wheel. Apply remaining nuts fingertight. Then snug all nuts to 50 ft.-lbs. following the sequence shown in step 6. 6 Complete procedure by tightening all the nuts in sequence shown to the recommended 450-500 ft.-lb. To ensure that the system will work as designed, maintain recommended torque. IMPORTANT Axle end parts seat in during normal vehicle operation. Therefore, it is necessary to repeat torquing procedure before placing new trucks into service and after each tire change, or whenever nuts are removed. Torque to 450-500 ft.-lbs. Check torque output of impact wrenches frequently. Torque wrenches should be calibrated periodically. Record calibration dates. 6
TECH BRAKE DRUM MOUNTING PROBLEMS FOR PROPER BRAKE DRUM MOUNTING PROCEDURES, PLEASE REFER TO TECH DATA #TD4. There are several causes of improper brake drum mounting. We will show you what the most common conditions are, how to identify them, and how to avoid problems.. The most common cause of improper brake drum mounting is not locating one hub pilot pad at the twelve o clock position when mounting the drum. This causes the brake drum to be slightly cocked, and may not be noticeable to the naked eye. Sometimes this condition is confused with the brake drum being out of round, when in fact it is not, it has only been mismounted. 2. Wheel Bolt BURR In this improper mounting, the hub s pilot pad cuts into the drum back pilot diameter, causing a burr to appear as shown above. Corrosion can build up at the brake drum pilots, in the corner between the pilot step and the hub face. This corrosion can prevent a drum from seating completely against the hub, resulting in drum runout or a cracked drum when the wheel is torqued up. If there is corrosion at the area shown, it must be removed before the drum is installed. Scrape away all corroded material and clean up with a wire brush. On aluminum hubs, be careful not to cut into the hub itself. Brake Drum Hub Corrosion Build-up REMOVE For proper mounting, locate one hub pilot pad at twelve o clock position, making sure drum is properly positioned on raised step of pilot pad. 3. Dirt, debris, or rust on the hub mounting face can also keep the drum from mating solidly against the hub. If not corrected, this condition can lead to problems such as wheel nut torque loss or drum runout. All foreign material should be removed from mating surfaces before the drum is installed. Normally a wire brush is suitable for cleaning the face hub. Be sure to look for any buildup around the wheel bolts. If a used drum is to be re-installed, both sides of its mounting face also need to be free of foreign matter. 7
8
9
0
Otherwise, replace both drums.
CentriFuse Numerical Index CentriFuse Numerical Index Mounting Type CentriFuse Drum Part No. Brake Size Wt. Lb Over All Depth Brake Surf. Width Hub Pilot Dia. Bolt Circle Dia. # of Bolt Holes Bolt Hole Dia. Drum Back No. Drum Band No. O 60000 6.5 x 5 75 8.88 5.46 8.78 285.75 0.25 90599 87369 Special Information O 600002 6.5 x 7 84 0.4 7.64 9.00 275 8 0.92 88798 60000 CentriFuse Lite O 600084 6.5 x 7 84 0.4 7.64 8.78 285.75 0 0.96 9538 60000 CentriFuse Lite O 870B 6.5 x 7 90 0.4 7.64 8.53.25 0 0.8 96 8705 Replaces 86879 O 8728B 5 x 7 90 0.22 7.42 8.53.25 0 0.8 9008 8732 Replaces 86935 O 8756B 6.5 x 7 90 0.4 7.64 9.00.25 0 0.8 8757 8705 Replaces 86232 O 87295B 6.5 x 7 89 0.04 7.27 8.53.25 0 0.8 96 87298 I 87397B 6.5 x 7 84 8.3 7.24 9.44 5 0.78 88253 87298 Replaces 85593 & 864 I 87405B 6.5 x 7 84 8.50 7.64.25 2.75 5 0.77 87406 8705 CA, Replaces 85968B I 87407B 6.5 x 7 85 9.66 7.58 9.44.25 0 0.8 8852 8705 Replaces 85369, 8583, 8640, 86909 I 8745B 6.5 x 7 85 8.66 7.64 9.50.25 0 0.8 8746 8705 Replaces 8530 & 8634 I 8747B 6.5 x 7 86 8.66 7.64 9.44.25 0 0.8 8748 8705 Replaces 8567 O 8765B 6.5 x 8.62 96 2.5 9.38 8.53.25 0 0.8 96 8768 Replaces 86889 O 87945BK 5 x 4 65 8.84 4.40 8.53.25 0.25 9024 9028 O 884B 5 x 4 64 8.53 4.49 9.00.25 0.25 886 9028 Replaces 87439, 9068B I 885B 5 x 4 64 7.89 4.46 9.44.25 0 0.8 887 9028 CA, Replaces 87357 O 88507B 6.5 x 5 77 9.53 5.8 8.53.25 0.25 88508 87369 CA O 88739B 6.5 x 5 74 8.59 5.87 8.53.25 0.25 88435 87369 O 88797B 6.5 x 7 90 0.4 7.64 9.00 275 8 0.92 88798 8705 O 8884B 6.5 x 5 76 9.2 5.83 9.00 275 8 0.92 8880 87369 O 88870BK 5 x 4 64 8.84 4.40 9.00 275 8 0.92 9025 9028 O 89467B 6.5 x 8.62 96.87 9.08 8.53.25 0 0.8 96 8768 O 8957B 6.5 x 8.62 98 2.5 9.36 9.00 275 8 0.92 88798 8768 O 8965B 6.5 x 7 89 0.04 7.24 9.00 275 8 0.92 88798 87298 O 89855B 5 x 6 79 9.30 6.50 9.00.25 0.25 87438 89852 Replaces 8988 O 89870BK 5 x 4 65 8.84 4.52 8.78 285.75 0.25 9026 9028 O 89874B 6.5 x 5 77 9.53 5.8 8.78 285.75 0.25 89873 87369 O 89877B 6.5 x 7 89 0.04 7.27 8.78 285.75 0 0.96 9538 87298 O 89996B 6.5 x 7 90 0.4 7.64 8.78 285.75 0 0.96 9538 8705 O 90089BK 5 x 4 64 8.46 4.5 8.78 285.75 0.25 9294 9028 O 9037B 6.5 x 5 74 8.59 5.87 8.78 285.75 0.25 9507 87369 O 9048B 5 x 7 90 0.22 7.39 8.78 285.75 0 0.96 9293 8732 CA O 9072B 5 x 7 89 9.80 7.43 8.78 285.75 0 0.96 9070 8732 CA O 9074B 5 x 5 78 9.53 5.8 8.78 285.75 0.25 9073 873 O 9076B 5 x 5 78 9.53 5.8 9.00 275 8 0.92 9075 873 O 90434B 6.5 x 8.62 96.87 9.08 8.78 285.75 0 0.96 9538 8768 O 90486B 6.5 x 8.62 98 2.5 9.38 8.78 285.75 0 0.96 9538 8768 O 90499B 6.5 x 7 90 0.4 7.64 8.78 285.75 0.25 9507 8705 CA O 90600B 6.5 x 5 76 9.22 5.82 8.78 285.75 0.25 90599 87369 O 90660BK 5 x 4 64 8.84 4.52 8.78 285.75 0 0.96 9029 9028 O 937BK 5 x 4 64 8.53 4.46 8.78 285.75 0 0.96 936 9028 O 9265B 6.5 x 6 88 9.62 6.68 8.78 285.75 0.25 9264 87298 Replaces 9049B O 9438B 5 x 8.62 90.9 9. 9.00 275 8 0.92 9439 9480 For industry axles except Meritor TN O 9482B 5 x 8.62 90.9 9. 8.78 285.75 0 0.96 948 9480 For industry axles except Meritor TN O 9589B 5 x 6 80 9.30 6.50 8.78 285.75 0.25 9588 89852 O 9655B 5 x 7 90 0.22 7.42 9.00 275 8 0.92 9654 8732 O 9723B 5 x 8.62 90.44 9. 9.00 275 8 0.92 9722 9480 For Meritor TN axle only O 9725B 5 x 8.62 90.44 9. 8.78 285.75 0 0.96 9724 9480 For Meritor TN or TB axle only O 9792B 6.5 x 8 95 0.90 8.55 8.78 285.75 0 0.96 9793 9795 O 982B 6.5 x 8.62 00.46 9.22 8.78 285.75 0 0.96 983 8768 0.375 thick mtg. Notes: CentriFuse drum mounting face is 0.25" thick unless otherwise noted. Notes: CA = Check Availability I = Inboard Mounted Drums For general notes, see page 2 O = Outboard Mounted Drums All CentriFuse Drums are Balanced 3
CentriFuse Brake Size Index CentriFuse Brake Size Index Mtg. Type CentriFuse Drum Part No. 5 x 4 Brake Size Brake Size Wt. Lb Over All Depth Brake Surf. Width Hub Pilot Dia. Bolt Circle Dia. No. Bolt Holes Bolt Hole Dia. Drum Back No. Drum Band No. Special Information I 885B 5 x 4 64 7.89 4.46 9.44.25 0 0.8 887 9028 CA, Replaces 87357 O 90089BK 5 x 4 64 8.46 4.5 8.78 285.75 0.25 9294 9028 O 884B 5 x 4 64 8.53 4.49 9.00.25 0.25 886 9028 Replaces 87439, 9068B O 937BK 5 x 4 64 8.53 4.46 8.78 285.75 0 0.96 936 9028 O 87945BK 5 x 4 65 8.84 4.40 8.53.25 0.25 9024 9028 O 88870BK 5 x 4 64 8.84 4.40 9.00 275 8 0.92 9025 9028 O 89870BK 5 x 4 65 8.84 4.52 8.78 285.75 0.25 9026 9028 O 90660BK 5 x 4 64 8.84 4.52 8.78 285.75 0 0.96 9029 9028 5 x 5 Brake Size O 9074B 5 x 5 78 9.53 5.8 8.78 285.75 0.25 9073 873 O 9076B 5 x 5 78 9.53 5.8 9.00 275 8 0.92 9075 873 5 x 6 Brake Size O 89855B 5 x 6 79 9.30 6.50 9.00.25 0.25 87438 89852 Replaces 8988 O 9589B 5 x 6 80 9.30 6.50 8.78 285.75 0.25 9588 89852 5 x 7 Brake Size O 9072B 5 x 7 89 9.80 7.43 8.78 285.75 0 0.96 9070 8732 CA O 8728B 5 x 7 90 0.22 7.42 8.53.25 0 0.8 9008 8732 Replaces 86935 O 9048B 5 x 7 90 0.22 7.39 8.78 285.75 0 0.96 9293 8732 CA O 9655B 5 x 7 90 0.22 7.42 9.00 275 8 0.92 9654 8732 5 x 8.62 Brake Size O 9438B 5 x 8.62 90.9 9. 9.00 275 8 0.92 9439 9480 For industry axles except Meritor TN O 9482B 5 x 8.62 90.9 9. 8.78 285.75 0 0.96 948 9480 For industry axles except Meritor TN O 9723B 5 x 8.62 90.44 9. 9.00 275 8 0.92 9722 9480 For Meritor TN axle only O 9725B 5 x 8.62 90.44 9. 8.78 285.75 0 0.96 9724 9480 For Meritor TN or TB axle only 6.5 x 5 Brake Size O 88739B 6.5 x 5 74 8.59 5.87 8.53.25 0.25 88435 87369 O 9037B 6.5 x 5 74 8.59 5.87 8.78 285.75 0.25 9507 87369 O 60000 6.5 x 5 75 8.88 5.46 8.78 285.75 0.25 90599 87369 O 8884B 6.5 x 5 76 9.2 5.83 9.00 275 8 0.92 8880 87369 O 90600B 6.5 x 5 76 9.22 5.82 8.78 285.75 0.25 90599 87369 O 88507B 6.5 x 5 77 9.53 5.8 8.53.25 0.25 88508 87369 CA O 89874B 6.5 x 5 77 9.53 5.8 8.78 285.75 0.25 89873 87369 Notes: CentriFuse drum mounting face is 0.25" thick unless otherwise noted. Notes: CA - Check Availability I - Inboard Mounted Drums For general notes see page 2 O - Outboard Mounted Drums All CentriFuse Drums are Balanced 4
CentriFuse Brake Size Index (continued) CentriFuse Brake Size Index (continued) Mtg. Type CentriFuse Drum Part No. 6.5 x 6 Brake Size Brake Size Wt. Lb Over All Depth Brake Surf. Width Hub Pilot Dia. Bolt Circle Dia. No. Bolt Holes Bolt Hole Dia. Drum Back No. Drum Band No. Special Information O 9265B 6.5 x 6 88 9.62 6.68 8.78 285.75 0.25 9264 87298 Replaces 9049B 6.5 x 7 Brake Size I 87397B 6.5 x 7 84 8.3 7.24 9.44 5 0.78 88253 87298 Replaces 85593 & 864 6 0.66 I 87405B 6.5 x 7 84 8.50 7.64.25 2.75 5 0.77 87406 8705 CA, Replaces 85968B 6 0.77 I 8745B 6.5 x 7 85 8.66 7.64 9.50.25 0 0.8 8746 8705 Replaces 8530 & 8634 I 8747B 6.5 x 7 86 8.66 7.64 9.44.25 0 0.8 8748 8705 Replaces 8567 I 87407B 6.5 x 7 85 9.66 7.58 9.44.25 0 0.8 8852 8705 Replaces 85369, 8583, 8640, 86909 O 87295B 6.5 x 7 89 0.04 7.27 8.53.25 0 0.8 96 87298 O 8965B 6.5 x 7 89 0.04 7.24 9.00 275 8 0.92 88798 87298 O 89877B 6.5 x 7 89 0.04 7.27 8.78 285.75 0 0.96 9538 87298 O 600002 6.5 x 7 84 0.4 7.64 9.00 275 8 0.92 88798 60000 CentriFuse Lite O 600084 6.5 x 7 84 0.4 7.64 8.78 285.75 0 0.96 9538 60000 CentriFuse Lite O 870B 6.5 x 7 90 0.4 7.64 8.53.25 0 0.8 96 8705 Replaces 86879 O 8756B 6.5 x 7 90 0.4 7.64 9.00.25 0 0.8 8757 8705 Replaces 86232 O 88797B 6.5 x 7 90 0.4 7.64 9.00 275 8 0.92 88798 8705 O 89996B 6.5 x 7 90 0.4 7.64 8.78 285.75 0 0.96 9538 8705 O 90499B 6.5 x 7 90 0.4 7.64 8.78 285.75 0.25 9507 8705 CA 6.5 x 8 Brake Size O 9792B 6.5 x 8 95 0.90 8.55 8.78 285.75 0 0.96 9793 9795 6.5 x 8.62 Brake Size O 982B 6.5 x 8.62 00.46 9.22 8.78 285.75 0 0.96 983 8768 0.375 thick mtg. O 89467B 6.5 x 8.62 96.87 9.08 8.53.25 0 0.8 96 8768 O 90434B 6.5 x 8.62 96.87 9.08 8.78 285.75 0 0.96 9538 8768 O 8765B 6.5 x 8.62 96 2.5 9.38 8.53.25 0 0.8 96 8768 Replaces 86889 O 8957B 6.5 x 8.62 98 2.5 9.36 9.00 275 8 0.92 88798 8768 O 90486B 6.5 x 8.62 98 2.5 9.38 8.78 285.75 0 0.96 9538 8768 Notes: CentriFuse drum mounting face is 0.25" thick unless otherwise noted. Notes: CA - Check Availability I - Inboard Mounted Drums For general notes see page 2 O - Outboard Mounted Drums All CentriFuse Drums are Balanced 5
CentriFuse Cross CentriFuse Reference Cross Reference ArvinMeritor (Dayton / X30) CentriFuse ArvinMeritor (X30) CentriFuse Webb CentriFuse 0257 87397B 53-2359-002 9048B 60528 90089BK 02677 87397B 53-23592-002 8728B 60545 89870BK 2000 87397B 53-23594-002 9655B 60864 B 89996B 2007 87397B 53-23595-002 884B 60875 B 88797B 20038 87397B 53-23596-002 89467B 60893 B 870B 20075 87405B 53-23597-002 90434B 60895 B 8756B 20389 87397B 53-23598-002 9074B 657 8728B 20643 8745B 53-23599-002 9076B 699 9725B 2255 87397B 53-23600-002 9074B 64483 885B 2294 8745B 53-2360-002 9725B 6557 89855B 22203 8745B 53-23602-002 9723B 65543 88870BK 22287 87405B 53-23603-002 9482B 65545 89870BK 22332 8756B 53-23604-002 9438B 65547 90089BK 22333 8728B 53-23605-002 88739B 65550 87945BK 22340 8745B 53-23606-002 9037B 65739 88739B 22453 87295B 53-23607-002 9265B 66800 9792B 22460 8765B 53-23608-002 9265B 668 89467B 22505 885B 53-23609-002 87945BK 6684 90486B 22506 8747B 53-23627-002 60000 6685 8765B 22550 8756B Gunite CentriFuse 6686 8957B 22607 870B 2546B 8747B 66854A 982B 2280 8765B 2983C 87397B 66864 89996B 23022 89877B 308A 8745B 66873 89877B 23207 89996B 3097A 9072B 66875 88797B 2332 884B 34 8756B 66878 8965B 2335 8728B 34B 88797B 66884 89996B 23404 89996B 366 870B 66892 87295B 23423 89870BK 329 8728B 66893 870B 23448 89870BK 329A 9048B 66895 8756B 53-2352-002 90089BK 3295A 87405B 670B 870B 53-2359-002 87397B 3402 89877B 6728B 8728B 53-23535-002 9792B 3402A 8965B 6756B 8756B 53-23537-002 89996B 3483 870B 67397B 87397B 53-23542-002 89870BK 3574 87945BK 67405B 87405B 53-23544-002 982B 3596 90089BK 6745B 8745B 53-23564-002 870B 3598A 8884B 67434B 90434B 53-23565-002 8756B 3600 90499B 6758 87397B 53-23566-002 88797B 3600A 89996B 6765B 8765B 53-23567-002 937BK 360 885B 67945B 87945BK 53-23568-002 90660BK 3630 90600B 68730 8745B 53-23575-002 88870BK 3686 9589B 68797B 88797B 53-23579-002 8957B 3687 9265B 6884B 884B 53-23580-002 8765B 3699 87295B 68872B 88870BK 53-2358-002 90486B 370 90600B 6892 8747B 53-23582-002 87295B 372A 90089BK 6898 87405B 53-23583-002 89877B 3726X 89870BK 6957B 8957B 53-23584-002 8965B 3758 90600B 69870B 89870BK 53-23585-002 87407B 3782 9792B 69996B 89996B 53-23586-002 8747B 3800X 89870BK 53-23587-002 8745B 3807A 982B 53-23588-002 8884B 53-23589-002 90600B 6
CentruCast Cross Reference CentruCast Cross Reference ArvinMeritor CentruCast ConMet CentruCast Webb CentruCast (Dayton) 20586 633076 0750 2308709 6527 230840 22453 2308002 0750 230872 6528 2308705 22898 630003 0764 630005 6577 2308400 22990 633076 0793 2308804 659 230800 23207 2308709 07453 2308704 6267 2308804 23207 230872 07507 230840 6363 2663 23254 2308705 07637 630007 63680 630002 23365 633096 07638 630000 6562 2308708 23366 63000 07875 630003 65543B 630004 23367 230840 07902 630004 65545B 63000 23370 2308406 Gunite CentruCast 65554 630005 2337 2308406 2546C 633076 65654 2308406 23383 2308704 34B 630003 66800 630007 23386 2308705 329A 2308400 6684 630006 23388 2308704 340A 630003 66852 2308002 23406 630006 3402 633050 66854 630000 23409 630003 3557 2663 66864 230872 23520 630007 3600A 230872 66864B 2308709 23570 630000 3600AX 2308709 66873 633050 29297 630005 3687X 2308804 66875 630003 3699 2308002 66884 633096 372AX 2308705 66892 2308002 372X 230840 68765 633076 3726X 630005 374X 630004 3758 2308704 3782 630007 3800X 630005 7
rums ervice ations al Index ke Size ke Size /Band umber rence rence ntages ntages rranty rranty blies eners exico rvice CentruCast Hub & Brake Drum Year CentriFuse Limited Warranty Brake Drum FOR TRUCKS, TRAILERS, AND BUSES 0 Year Warranty Motor Wheel warrants to the user to replace each on-highway CentruCast ductile iron Motor Hub Wheel or Brake warrants Drum to which the user becomes to replace unserviceable each CentriFuse within one 5 and year of date 6-/2 of manufacture Truck or due Truck/Trailer to functional Brake defects Drum in manufactured workmanship after or materials, January, excluding 994, finish. which becomes unserviceable due to workmanship or material, or breaks before ten years from date of manufacture, or before the 0.20 This warranty wear limit shall is reached not apply if whichever failure is due occurs to other first. This components, warranty lack shall of not required apply maintenance, if failure is misuse, due to other damage brake by components, accident, improper lack of installation required or adjustment, maintenance, excessive misuse, speeds, damage or other by abnormal accident, or improper severe installation operating or conditions. adjustment of braking systems. Motor Wheel s Motor Wheel s obligation obligation under this under warranty this warranty is limited, is limited, upon inspection upon inspection of failed parts, of failed vehicles, parts, and vehicles, maintenance and maintenance records, to records, replace, to FOB replace, our F.O.B. factory, our any part factory, which any our examination CentriFuse Brake discloses Drum to as be shall defective. be returned Parts to on us which or our a warranty authorized is claimed representative must, upon request, with transportation be returned charges to place prepaid, of manufacture and which or to our our authorized examination representative discloses to with be defective. transportation charges prepaid. THIS WARRANTY THIS WARRANTY IS IN LIEU IS IN OF LIEU ALL OF OTHER ALL OTHER WARRANTIES, WARRANTIES, EXPRESS OR IMPLIED, EXPRESS INCLUDING OR IMPLIED, THE INCLUDING WARRANTIES THE OF WARRANTIES MERCHANTABILITY OF OR FITNESS MERCHANTABILITY FOR A PARTICULAR OR FITNESS PURPOSE, FOR APPLICATION A PARTICULAR OR USE. PURPOSE, IN NO EVENT APPLICATION SHALL MOTOR OR WHEEL S USE. IN NO LIABILITY EVENT EXCEED SHALL MOTOR THE ORIGINAL WHEEL S PRICE LIABILITY OF THE PRODUCT, EXCEED THE NOR ORIGINAL SHALL MOTOR PRICE WHEEL OF THE BE CENTRIFUSE LIABLE FOR SPECIAL, BRAKE INCIDENTAL DRUM, NOR SHALL CONSEQUENTIAL MOTOR WHEEL DAMAGES. BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. 830 RONDA DRIVE CANTON, MICHIGAN 4887 U.S.A. 830 RONDA www.motorwheelcvs.com DRIVE CANTON, MICHIGAN 4887 U.S.A. www.motorwheelcvs.com Form #4-007 Form #4-005 8
CentruCast Brake Size Index CentruCast Brake Size Index Mtg. Type Full Cast Drum Part No. 2.25 x 7.5 Brake Size Brake Size Wt. Lb Overall Depth Brake Surface Width Hub Pilot Dia. Bolt Circle Dia. No. Bolt Holes Bolt Hole Dia. Special Information I 2663 2.25 x 7.5 86 0.50 8.24 7.3 8.75 0 0.84 Unbalanced O 630002 2.25 x 7.5 92.5 8.6 9.00 275 8 0.92 Unbalanced 5 x 4 Brake Size O 63000 5 x 4 78 9.20 4.6 8.78 285.75 0 0.94 Balanced O 630004 5 x 4 78 9.20 4.6 9.00 275 8 0.92 Balanced O 630005 5 x 4 78 9.20 4.6 8.78 285.75 0.26 Balanced O 230840 5 x 4 78 8.82 4.58 8.78.25 0 0.94 Balanced O 2308705 5 x 4 78 8.82 4.58 8.78.25 0.26 Balanced 5 x 7 Brake Size O 633049 5 x 7 0 0.47 7.63 8.78.25 0.02 Balanced, Replaces 2308400, 0.56" Drum Face 6.5 x 5 Brake Size O 2308406 6.5 x 5 95 9.48 5.83 8.78.25 0 0.94 Balanced O 2308704 6.5 x 5 95 9.48 5.83 8.78.25 0.26 Balanced 6.5 x 6 Brake Size O 63307 6.5 x 6 0 9.75 6.63 8.78.25 0.26 Balanced, Replaces 2308804, 0.63" Drum Face O 633027 6.5 x 6 0 9.75 6.63 8.78.25 0 0.94 Balanced, Replaces 2308708, 0.63" Drum Face 6.5 x 7 Brake Size O 2308002 6.5 x 7 06 0.38 7.5 8.53.25 0 0.84 Balanced O 2308709 6.5 x 7 2 0.59 7.59 8.78.25 0 0.94 Balanced O 230872 6.5 x 7 2 0.59 7.59 8.78.25 0 0.94 Unbalanced O 630003 6.5 x 7 3 0.59 7.59 9.00 275 8 0.92 Balanced O 630003A 6.5 x 7 3 0.59 7.59 9.00 275 8 0.92 Unbalanced O 633096 6.5 x 7 22 0.59 7.59 8.78.25 0 0.94 Balanced O 633096A 6.5 x 7 22 0.59 7.59 8.78.25 0 0.94 Unbalanced 6.5 x 8 Brake Size O 630007 6.5 x 8 8.23 8.70 8.78.25 0 0.94 Balanced O 630007A 6.5 x 8 8.23 8.70 8.78.25 0 0.94 Unbalanced 6.5 x 8.62 Brake Size O 630000 6.5 x 8.62 25.67 9.8 8.78.25 0 0.94 Balanced, 0.62" Drum Face O 630000A 6.5 x 8.62 25.67 9.8 8.78.25 0 0.94 Unbalanced, 0.62" Drum Face O 630006 6.5 x 8.62 25 2.4 9.8 8.78.25 0 0.94 Balanced O 630006A 6.5 x 8.62 25 2.4 9.8 8.78.25 0 0.94 Unbalanced Notes: I - Inboard Mounted Drums O - Outboard Mounted Drums Cast drum mounting face is 0.50" thick unless otherwise noted. For general notes, see page 2 9
20
2
CentriFuse CentriFuse Hub Piloted System: System: 8 Hole, 8 Hole, 275mm 275mm Bolt Bolt Circle Circle (CLN) (CLN) Item Hub & Drum Brake Hub Wheel ABS Foot Drum Hub and Wheel Drive # Part Number Size Material Usage Loc. Notes Weight Part # Bolt Bolt Studs FF - Front Axle BEARINGS: Inner/Outer Cups: HM220/3720 Cones: HM22047 or 49/3782 Seal O.D.: 4.84 AXLE/APPLICATION: Eaton - EFA-2F4, EFA-3FS Meritor - FF94, FF942, FF943, FF96, FG94 Spicer - I00S, I20S, I40S Westport - F3W200, F3W400, F6W200, F6W400 9420BK 5 x 4 Iron S.53 22 88870BK 949 900 2 90587BK 5 x 4 Iron A.53 22 88870BK 90578 88836 3 240008 5 x 4 Alum S.53 03 88870BK 07578 07477 4 240009 5 x 4 Alum A.53 03 88870BK 07579 07479 5 942B 6.5 x 5 Iron S.53 35 8884B 949 900 6 90579B 6.5 x 5 Iron A.53 35 8884B 90578 88836 7 24000 6.5 x 5 Alum S.53 6 8884B 07578 07477 8 2400 6.5 x 5 Alum A.53 6 8884B 07579 07479 R - Drive Axle BEARINGS: Inner/Outer Cups: 592A / 572 Cones: 598A or 594A / 580 Seal O.D.: 6.3 AXLE/APPLICATION: Eaton - 2, 22, 23, 26, 402, 45, 46, 52 Spicer - 220, 230, 400, 460 Meritor - Q, R & S Series 9 340005 5 x 8.62 Alum A 2.33 V 3 9438B 04980 02292 (8) - 5/8 0 30002 6.5 x 7 Alum A L 33 88797B 052 02292 (8) - 5/8 34002 6.5 x 7 Alum A 2.33 L 33 88797B 0524 02292 (8) - 5/8 2 96B 6.5 x 7 Iron S L 57 88797B 95 88836 (8) - 5/8 3 920B 6.5 x 7 Iron S 2.33 L 58 88797B 99 88836 (8) - 5/8 4 930B 6.5 x 7 Iron S 57 88797B 92 88836 (8) - 5/8 5 938B 6.5 x 7 Iron S 2.33 58 88797B 937 88836 (8) - 5/8 6 93B 6.5 x 7 Iron A 58 88797B 922 89620 (8) - 5/8 7 9320B 6.5 x 7 Iron A 2.33 59 88797B 939 89620 (8) - 5/8 8 9322B 6.5 x 7 Iron A L 58 88797B 932 89620 (8) - 5/8 9 936B 6.5 x 7 Iron A 2.33 L 59 88797B 935 89620 (8) - 5/8 Notes: For general notes, see page 2. L = Lube fill: /4-8 NPTF Iron Hubs, 9/6-8 O-ring Seal Alum. Hubs V = For industry axles except Meritor TN or TB 22
CentriFuse CentriFuse Hub Piloted System: 8 Hole, 8 Hole, 275mm 257mm Bolt Circle Bolt (CLN) Circle (CLN) Item Hub & Drum Brake Hub Wheel ABS Foot Drum Hub and Wheel Drive # Part Number Size Material Usage Loc. Notes Weight Part # Bolt Bolt Studs N - Trailer Axle BEARINGS: Inner/Outer Cups: HM2820/HM220 Cones: HM28248/HM22049 Seal O.D.: 6.00 AXLE/APPLICATION: Dexter-D225K Ingersoll-A22,F22 Meritor-TN, RQ, TQ,TQD,TNC Eaton-ETA225J, EST230J KB-KBW Spicer-D22,K22 89424B 6.5 x 7 Iron S 36 88797B 89425 88836 2 90895B 6.5 x 7 Iron S 2.34 36 88797B 90894 88836 3 90609B 6.5 x 7 Iron A 37 88797B 90607 88799 4 90893B 6.5 x 7 Iron A 2.34 37 88797B 90892 88799 5 9370B 6.5 x 7 Alum S 20 88797B 9372 0288 6 9376B 6.5 x 7 Alum S 2.34 20 88797B 9378 0288 7 9373B 6.5 x 7 Alum A 2 88797B 9375 0289 8 9379B 6.5 x 7 Alum A 2.34 2 88797B 938 0289 9 89567B 6.5 x 8.62 Iron S U 52 8957B 89425 88836 0 44003 6.5 x 8.62 Iron S 2.34 U 53 8957B 90894 88836 9060B 6.5 x 8.62 Iron A U 53 8957B 90607 88799 2 937B 6.5 x 8.62 Alum S U 36 8957B 9372 0288 3 9377B 6.5 x 8.62 Alum S 2.34 U 36 8957B 9378 0288 4 9374B 6.5 x 8.62 Alum A U 37 8957B 9375 0289 5 9380B 6.5 x 8.62 Alum A 2.34 U 37 8957B 938 0289 P - Trailer Axle BEARINGS: Inner/Outer Cups: HM5840 / HM5840 Cones: HM58445 / HM58445 Seal O.D.: 6.00 AXLE/APPLICATION: Eaton - EST225P, EST230P Ingersoll-A24,F24 Spicer - P22 Fruehauf - PROPAR Meritor - TP 6 9806B 5 x 8.62 Alum A V 25 9438B 89850 0290 7 9807B 5 x 8.62 Alum A 2.2 V 25 9438B 9638 0290 8 89404B 6.5 x 7 Iron S 46 88797B 89403 88836 9 950B 6.5 x 7 Iron S 2.2 47 88797B 9509 88836 20 906B 6.5 x 7 Iron A 48 88797B 90608 88799 2 953B 6.5 x 7 Iron A 2.2 47 88797B 952 88799 22 89985B 6.5 x 7 Alum S 27 88797B 89984 0288 23 9639B 6.5 x 7 Alum S 2.2 25 88797B 9637 0288 24 89867B 6.5 x 7 Alum A 28 88797B 89850 0290 25 9640B 6.5 x 7 Alum A 2.2 26 88797B 9638 0290 26 89632B 6.5 x 8.62 Iron S U 59 8957B 89403 88836 27 95B 6.5 x 8.62 Iron S 2.2 U 60 8957B 9509 88836 28 9062B 6.5 x 8.62 Iron A U 6 8957B 90608 88799 29 954B 6.5 x 8.62 Iron A 2.2 U 63 8957B 952 88799 30 89868B 6.5 x 8.62 Alum A U 44 8957B 89850 0290 Notes: For general notes, see page 2. U = For axles with 8.62 linings located inboard of the 7 brake location V = For industry axles except Meritor TN or TB 23
CentriFuse CentriFuse Hub Piloted System: 0 Hole, 0 Hole, 285.75mm 285.75mm Bolt Circle Bolt (CLN) Circle (CLN) Item Hub & Drum Brake Hub Wheel ABS Foot Drum Hub and Wheel Drive # Part Number Size Material Usage Loc. Notes Weight Part # Bolt Bolt Studs FF - Front Axle BEARINGS: Inner/Outer Cups: HM220/3720 Cones: HM22047 or 49/3782 Seal O.D.: 4.84 AXLE/APPLICATION: Eaton - EFA-2F4, EFA-3FS Meritor - FF94, FF942, FF943, FF96, FG94 Spicer - I00S, I20S, I40S Westport - F3W200, F3W400, F6W200, F6W400 930BK 5 x 4 Iron A.53 7 89870BK 929 90427 2 9570BK 5 x 4 Alum S.53 02 89870BK 9550 02033 3 9572BK 5 x 4 Alum A.53 03 89870BK 955 02290 4 980B 5 x 5 Iron A.53 27 9074B 929 90427 5 98B 6.5 x 5 Iron A.53 29 90600B 929 90427 6 957B 6.5 x 5 Alum S.53 5 90600B 9550 02033 7 9573B 6.5 x 5 Alum A.53 6 90600B 955 02290 R - Drive Axle BEARINGS: Inner/Outer Cups: 592A / 572 Cones: 598A or 594A / 580 Seal O.D.: 6.3 AXLE/APPLICATION: Eaton - 2, 22, 23, 26, 402, 45, 46, 52 Spicer - 220, 230, 400, 460 Meritor - Q, R & S Series 8 340002 5 x 8.62 Iron S 2.33 V 56 9482B 429203 308503 (8) - 5/8 9 340003 5 x 8.62 Iron A 2.33 V 57 9482B 428725 30850 (8) - 5/8 0 340004 5 x 8.62 Alum A 2.33 V 35 9482B 04970 02292 (8) - 5/8 90883B 6.5 x 7 Iron S 54 89996B 228724 308503 (8) - 5/8 2 9407B 6.5 x 7 Iron S 2.33 56 89996B 429203 308503 (8) - 5/8 3 90322B 6.5 x 7 Iron A 55 89996B 228725 30850 (8) - 5/8 4 9400B 6.5 x 7 Iron A 2.33 60 89996B 428725 30850 (8) - 5/8 5 9647B 6.5 x 7 Alum S 2.33 32 89996B 9646 965 (8) - 5/8 6 9649B 6.5 x 7 Alum A 2.33 33 89996B 9648 963 (8) - 5/8 7 34005 6.5 x 7 Iron S 2.33 L 62 89996B 350005 308503 (8) - 5/8 8 90884B 6.5 x 8.62 Iron S U 7 90434B 228724 308503 (8) - 5/8 9 9408B 6.5 x 8.62 Iron S 2.33 U 7 90434B 429203 308503 (8) - 5/8 20 90440B 6.5 x 8.62 Iron A U 73 90434B 228725 30850 (8) - 5/8 2 9399B 6.5 x 8.62 Iron A 2.33 U 73 90434B 428725 30850 (8) - 5/8 R-Short - Drive Axle BEARINGS: Inner/Outer Cups: 592A / 572 Cones: 598A or 594A / 580 Seal O.D.: 6.3 AXLE/APPLICATION: Eaton - 2, 22, 23, 26, 402, 45, 46, 52 Spicer - 220, 230, 400, 460 Meritor - Q, R & S Series 22 340006 5 x 8.62 Iron S 2.33 V 54 9482B 429204 308503 (8) - 3/4 23 220940 6.5 x 7 Iron S 5 89996B 22878 308503 (8) - 5/8 24 9802B 6.5 x 7 Iron S 2.33 56 89996B 42920 308503 (8) - 5/8 25 2209306 6.5 x 7 Iron A 52 89996B 22882 30850 (8) - 5/8 26 4209305 6.5 x 7 Iron A 2.33 53 89996B 42930 30850 (8) - 5/8 Notes: For general notes, see page 2. L = Lube fill: /4-8 NPTF Iron Hubs, 9/6-8 O-ring Seal Alum. Hubs U = For axles with 8.62 linings located inboard of the 7 brake location V = For industry axles except Meritor TN or TB 24
CentriFuse CentriFuse Hub Piloted System: 0 Hole, 0 Hole, 285.75mm 285.75mm Bolt Circle Bolt (CLN) Circle (CLN) Item Hub & Drum Brake Hub Wheel ABS Foot Drum Hub and Wheel Drive # Part Number Size Material Usage Loc. Notes Weight Part # Bolt Bolt Studs N - Trailer Axle BEARINGS: Inner/Outer Cups: HM2820/HM220 Cones: HM28248/HM22049 Seal O.D.: 6.00 AXLE/APPLICATION: Dexter-D225K Ingersoll-A22,F22 Meritor-TN, RQ, TQ,TQD,TNC Eaton-ETA225J, EST230J KB-KBW Spicer-D22,K22 40035 5 X 8.62 Lite Iron S V 28 9482B 40052 500006 2 44035 5 X 8.62 Lite Iron S 2.34 V 29 9482B 450052 500006 3 9687B 5 X 8.62 Alum A L, V 24 9482B 05774 0290 4 9688B 5 X 8.62 Alum A 2.34 L, V 24 9482B 05782 0290 5 9756B 5 X 8.62 Alum S L, W 24 9725B 05773 0288 6 9757B 5 X 8.62 Alum S 2.34 L, W 24 9725B 0578 0288 7 9758B 5 X 8.62 Alum A L, W 24 9725B 05774 0290 8 9759B 5 X 8.62 Alum A 2.34 L, W 24 9725B 05782 0290 9 4009 6.5 X 7 Lite Iron S 22 600084 40052 500006 0 4409 6.5 X 7 Lite Iron S 2.34 23 600084 450052 500006 40020 6.5 X 7 Lite Iron A 23 600084 40053 500007 2 44020 6.5 X 7 Lite Iron A 2.34 24 600084 450053 500007 3 4002 6.5 X 7 Lite Iron S 28 89996B 40052 500006 4 4402 6.5 X 7 Lite Iron S 2.34 29 89996B 450052 500006 5 40022 6.5 X 7 Lite Iron A 29 89996B 40053 500007 6 44022 6.5 X 7 Lite Iron A 2.34 30 89996B 450053 500007 7 400084 6.5 X 7 Alum S L 7 600084 05773 0288 8 440084 6.5 X 7 Alum S 2.34 L 8 600084 0578 0288 9 400085 6.5 X 7 Alum A L 8 600084 05774 0290 20 440085 6.5 X 7 Alum A 2.34 L 9 600084 05782 0290 2 979B 6.5 X 7 Alum S L 22 89996B 05773 0288 22 983B 6.5 X 7 Alum S 2.34 L 23 89996B 0578 0288 23 977B 6.5 X 7 Alum A L 23 89996B 05774 0290 24 98B 6.5 X 7 Alum A 2.34 L 23 89996B 05782 0290 25 400002 6.5 X 8 Alum S L 28 9792B 05773 0288 26 440002 6.5 X 8 Alum S 2.34 L 28 9792B 0578 0288 27 400003 6.5 X 8 Alum A L 29 9792B 05774 0290 28 440003 6.5 X 8 Alum A 2.34 L 29 9792B 05782 0290 29 4003 6.5 X 8.62 Lite Iron S T 38 982B 40052 500006 30 4403 6.5 X 8.62 Lite Iron S 2.34 T 39 982B 450052 500006 3 40032 6.5 X 8.62 Lite Iron A T 39 982B 40053 500007 32 44032 6.5 X 8.62 Lite Iron A 2.34 T 40 982B 450053 500007 33 40033 6.5 X 8.62 Lite Iron S U 36 90486B 40052 500006 34 44033 6.5 X 8.62 Lite Iron S 2.34 U 37 90486B 450052 500006 35 40034 6.5 X 8.62 Lite Iron A U 37 90486B 40053 500007 36 44034 6.5 X 8.62 Lite Iron A 2.34 U 38 90486B 450053 500007 37 9257B 6.5 X 8.62 Alum S L, U 30 90486B 05773 0288 38 9259B 6.5 X 8.62 Alum S 2.34 L, U 3 90486B 0578 0288 39 9256B 6.5 X 8.62 Alum A L, U 3 90486B 05774 0290 40 9258B 6.5 X 8.62 Alum A 2.34 L, U 32 90486B 05782 0290 4 400025 6.5 X 8.62 Alum S L, T 32 982B 05773 0288 42 440025 6.5 X 8.62 Alum S 2.34 L, T 32 982B 0578 0288 43 400026 6.5 X 8.62 Alum A L, T 34 982B 05774 0290 44 440026 6.5 X 8.62 Alum A 2.34 L, T 34 982B 05782 0290 Notes: For general notes, see page 2. L = Lube fill: /4-8 NPTF Iron Hubs, 9/6-8 O-ring Seal Alum. Hubs T = For axles with 8.62 linings located at the 7 brake location U = For axles with 8.62 linings located inboard of the 7 brake location V = For industry axles except Meritor TN or TB W = For Meritor TN or TB axles only 25
CentriFuse CentriFuse Hub Piloted System: 0 Hole, 285.75mm Bolt Circle (CLN) Hub Piloted System: 0 Hole, 285.75mm Bolt Circle (CLN) Item Hub & Drum Brake Hub Wheel ABS Foot Drum Hub and Wheel Drive # Part Number Size Material Usage Loc. Notes Weight Part # Bolt Bolt Studs P - Trailer Axle BEARINGS: Inner/Outer Cups: HM5840 / HM5840 Cones: HM58445 / HM58445 Seal O.D.: 6.00 AXLE/APPLICATION: Eaton - EST225P, EST230P Ingersoll-A24,F24 Spicer - P22 Fruehauf - PROPAR Meritor - TP 4003 6.5 X 7 Lite Iron S 30 89996B 40050 500006 2 4403 6.5 X 7 Lite Iron S 2.2 3 89996B 450050 500006 3 4004 6.5 X 7 Lite Iron A 3 89996B 4005 500007 4 4404 6.5 X 7 Lite Iron A 2.2 32 89996B 45005 500007 5 4005 6.5 X 7 Lite Iron S 24 600084 40050 500006 6 4405 6.5 X 7 Lite Iron S 2.2 25 600084 450050 500006 7 4006 6.5 X 7 Lite Iron A 25 600084 4005 500007 8 4406 6.5 X 7 Lite Iron A 2.2 26 600084 45005 500007 9 40002 6.5 X 7 Alum S L 29 89996B 0008 02290 0 44002 6.5 X 7 Alum S 2.2 L 29 89996B 00090 02290 40003 6.5 X 7 Alum A L 30 89996B 00083 02292 2 44003 6.5 X 7 Alum A 2.2 L 30 89996B 00092 02292 3 400006 6.5 X 8 Alum S L 34 9792B 0008 02290 4 440006 6.5 X 8 Alum S 2.2 L 34 9792B 00090 02290 5 400007 6.5 X 8 Alum A L 35 9792B 00083 02292 6 440007 6.5 X 8 Alum A 2.2 L 35 9792B 00092 02292 7 40038 6.5 X 8.62 Lite Iron S U 38 90486B 40050 500006 8 44038 6.5 X 8.62 Lite Iron S 2.2 U 39 90486B 450050 500006 9 40039 6.5 X 8.62 Lite Iron A U 39 90486B 4005 500007 20 44039 6.5 X 8.62 Lite Iron A 2.2 U 40 90486B 45005 500007 2 40036 6.5 X 8.62 Lite Iron S T 40 982B 40050 500006 22 44036 6.5 X 8.62 Lite Iron S 2.2 T 4 982B 450050 500006 23 40037 6.5 X 8.62 Lite Iron A T 4 982B 4005 500007 24 44037 6.5 X 8.62 Lite Iron A 2.2 T 42 982B 45005 500007 25 400029 6.5 X 8.62 Alum S L, T 4 982B 0008 02290 26 440029 6.5 X 8.62 Alum S 2.2 L, T 4 982B 00090 02290 27 400030 6.5 X 8.62 Alum A L, T 42 982B 00083 02292 28 440030 6.5 X 8.62 Alum A 2.2 L, T 42 982B 00092 02292 Notes: For general notes, see page 2. L = Lube fill: /4-8 NPTF Iron Hubs, 9/6-8 O-ring Seal Alum. Hubs T = For axles with 8.62 linings located at the 7 brake location U = For axles with 8.62 linings located inboard of the 7 brake location 26
CentriFuse CentriFuse Stud Piloted System: 0 Hoke, /4 Bolt Circle (DCN) Stud Piloted System: 0 Hole, /4" Bolt Circle (DCN) Item Hub & Drum R or L Brake Hub Wheel ABS Foot Drum Hub and Wheel Drive # Part Number Hand Size Material Usage Loc. Notes Weight Part # Bolt Bolt Studs FF - Front Axle BEARINGS: Inner/Outer Cups: HM220/3720 Cones: HM22047 or 49/3782 Seal O.D.: 4.84 AXLE/APPLICATION: Eaton - EFA-2F4, EFA-3FS Meritor - FF94, FF942, FF943, FF96, FG94 Spicer - I00S, I20S, I40S Westport - F3W200, F3W400, F6W200, F6W400 9043BK R 5 X 4 Iron A, S 5 89870BK 90428 90575 2 90432BK L 5 X 4 Iron A, S 5 89870BK 90429 90576 3 240002 R 5 X 5 Iron A, S.53 3 9074B 250000 90575 4 240003 L 5 X 5 Iron A, S.53 3 9074B 25000 90576 5 90604B R 6.5 X 5 Iron A, S 32 90600B 90428 90575 6 90605B L 6.5 X 5 Iron A, S 32 90600B 90429 90576 R - Drive Axle BEARINGS: Inner/Outer Cups: 592A / 572 Cones: 598A or 594A / 580 Seal O.D.: 6.3 AXLE/APPLICATION: Eaton - 2, 22, 23, 26, 402, 45, 46, 52 Spicer - 220, 230, 400, 460 Meritor - Q, R & S Series 7 90320B R 6.5 X 7 Iron A, S 57 89996B 228726 300840 (8) - 5/8 8 9032B L 6.5 X 7 Iron A, S 57 89996B 228727 3008402 (8) - 5/8 9 9397B R 6.5 X 7 Iron A, S 2.33 57 89996B 428726 300840 (8) - 5/8 0 9398B L 6.5 X 7 Iron A, S 2.33 57 89996B 428727 3008402 (8) - 5/8 90438B R 6.5 X 8.62 Iron A, S U 7 90434B 228726 300840 (8) - 5/8 2 90439B L 6.5 X 8.62 Iron A, S U 7 90434B 228727 3008402 (8) - 5/8 3 9403B R 6.5 X 8.62 Iron A, S 2.33 U 7 90434B 428726 300840 (8) - 5/8 4 9404B L 6.5 X 8.62 Iron A, S 2.33 U 7 90434B 428727 3008402 (8) - 5/8 R-Short - Drive Axle BEARINGS: Inner/Outer Cups: 592A / 572 Cones: 598A or 594A / 580 Seal O.D.: 6.3 AXLE/APPLICATION: Eaton - 2, 22, 23, 26, 402, 45, 46, 52 Spicer - 220, 230, 400, 460 Meritor - Q, R & S Series 5 340000 R 6.5 X 8 Iron A, S 2.33 54 9792B 429307 300840 (8) - 5/8 6 34000 L 6.5 x 8 Iron A, S 2.33 54 9792B 429308 3008402 (8) - 5/8 Notes: For general notes, see page 2. U = For axles with 8.62 linings located inboard of the 7 brake location 27
CentriFuse CentriFuse Stud Piloted System: System: 0 Hole, 0 Hole, /4" Bolt /4 Circle Bolt (DCN) Circle (DCN) Item Hub & Drum R or L Brake Hub Wheel ABS Foot Drum Hub and Wheel # Part Number Hand Size Material Usage Loc. Notes Weight Part # Bolt Bolt N - Trailer Axle BEARINGS: Inner/Outer Cups: HM2820/HM220 Cones: HM28248/HM22049 Seal O.D.: 6.00 AXLE/APPLICATION: Dexter-D225K Ingersoll-A22,F22 Meritor-TN, RQ, TQ,TQD,TNC Eaton-ETA225J, EST230J KB-KBW Spicer-D22,K22 40005 R 6.5 X 7 Iron A, S 35 89996B 289003 300840 2 400052 L 6.5 X 7 Iron A, S 35 89996B 289004 3008402 3 44005 R 6.5 X 7 Iron A, S 2.34 36 89996B 489003 300840 4 440052 L 6.5 X 7 Iron A, S 2.34 36 89996B 489004 3008402 5 400063 R 6.5 X 7 Alum A, S L 23 89996B 05728 0292 6 400064 L 6.5 X 7 Alum A, S L 23 89996B 05727 029 7 440063 R 6.5 X 7 Alum A, S 2.34 L 23 89996B 05748 0292 8 440064 L 6.5 X 7 Alum A, S 2.34 L 23 89996B 05747 029 9 400065 R 6.5 X 8.62 Alum A, S L, U 3 90486B 05728 0292 0 400066 L 6.5 X 8.62 Alum A, S L, U 3 90486B 05727 029 440065 R 6.5 X 8.62 Alum A, S 2.34 L, U 3 90486B 05748 0292 2 440066 L 6.5 X 8.62 Alum A, S 2.34 L, U 3 90486B 05747 029 P - Trailer Axle BEARINGS: Inner/Outer Cups: HM5840 / HM5840 Cones: HM58445 / HM58445 Seal O.D.: 6.00 AXLE/APPLICATION: Eaton - EST225P, EST230P Ingersoll-A24,F24 Spicer - P22 Fruehauf - PROPAR Meritor - TP 3 400034 R 6.5 X 7 Iron A, S 42 89996B 289303 300840 4 400035 L 6.5 X 7 Iron A, S 42 89996B 289304 3008402 5 440034 R 6.5 X 7 Iron A, S 2.2 42 89996B 489303 300840 6 440035 L 6.5 X 7 Iron A, S 2.2 42 89996B 489304 3008402 Notes: For general notes, see page 2. L = Lube fill: /4-8 NPTF Iron Hubs, 9/6-8 O-ring Seal Alum. Hubs U = For axles with 8.62 linings located inboard of the 7 brake location 28
Full Cast Full Cast Hub Piloted System: 8 Hole, 275mm Bolt Circle (CLN) Hub Piloted System: 8 Hole, 275mm Bolt Circle (CLN) Item Hub & Drum Brake Hub Wheel ABS Foot Drum Hub and Wheel Drive # Part Number Size Material Usage Loc. Notes Weight Part # Bolt Bolt Studs FF - Front Axle BEARINGS: Inner/Outer Cups: HM220/3720 Cones: HM22047 or 49/3782 Seal O.D.: 4.84 AXLE/APPLICATION: Eaton - EFA-2F4, EFA-3FS Meritor - FF94, FF942, FF943, FF96, FG94 Spicer - I00S, I20S, I40S Westport - F3W200, F3W400, F6W200, F6W400 24004 5 x 4 Iron S.53 33 630004 90578 88836 R - Drive Axle BEARINGS: Inner/Outer Cups: 592A / 572 Cones: 598A or 594A / 580 Seal O.D.: 6.3 AXLE/APPLICATION: Eaton - 2, 22, 23, 26, 402, 45, 46, 52 Spicer - 220, 230, 400, 460 Meritor - Q, R & S Series 2 34004 6.5 x 7 Iron S 2.33 L 8 630003 350004 88799 (8) - 5/8 N - Trailer Axle BEARINGS: Inner/Outer Cups: HM2820/HM220 Cones: HM28248/HM22049 Seal O.D.: 6.00 AXLE/APPLICATION: Dexter-D225K Ingersoll-A22,F22 Meritor-TN, RQ, TQ,TQD,TNC Eaton-ETA225J, EST230J KB-KBW Spicer-D22,K22 3 400038 2.25 x 7.50 Iron S Y 33 630002 40002 308503 4 440038 2.25 x 7.50 Iron S 2.34 Y, Z 34 630002 450002 308503 5 400067 2.25 x 7.50 Iron A Y 34 630002 400 30850 6 440067 2.25 x 7.50 Iron A 2.34 Y, Z 35 630002 4500 30850 7 400068 6.5 x 7 Iron S 62 630003 90607 88799 8 440068 6.5 x 7 Iron S 2.34 62 630003 90892 88799 P - Trailer Axle BEARINGS: Inner/Outer Cups: HM5840/HM5840 Cones: HM58445/HM58445 Seal O.D.: 6.00 AXLE/APPLICATION: Eaton-EST225P, EST230P Ingersoll-A24, F24 Spicer-P22 Fruehauf-PROPAR Meritor-TP 9 40007 2.25 x 7.50 Iron S Y 43 630002 43020 308503 0 44007 2.25 x 7.50 Iron S 2.2 Y, Z 44 630002 453020 308503 40008 2.25 x 7.50 Iron A Y 44 630002 4302 30850 2 44008 2.25 x 7.50 Iron A 2.2 Y, Z 45 630002 45302 30850 Notes: For general notes, see page 2. L = Lube fill: /4-8 NPTF Iron Hubs, 9/6-8 O-ring Seal Alum. Hubs Y = Assembly includes an unbalanced drum Z = 80-tooth ABS rings for use with tire diameters 5" and 7.5" 29
Full Cast Full Cast Hub Piloted System: 0 Hole, 0 Hole, 285.75mm 285.75mm Bolt Circle Bolt (CLN) Circle (CLN) Item Hub & Drum Brake Hub Wheel ABS Foot Drum Hub and Wheel Drive # Part Number Size Material Usage Loc. Notes Weight Part # Bolt Bolt Studs FF - Front Axle BEARINGS: Inner/Outer Cups: HM220/3720 Cones: HM22047 or 49/3782 Seal O.D.: 4.84 AXLE/APPLICATION: Eaton - EFA-2F4, EFA-3FS Meritor - FF94, FF942, FF943, FF96, FG94 Spicer - I00S, I20S, I40S Westport - F3W200, F3W400, F6W200, F6W400 24005 5 x 4 Iron S.53 Q 28 63000 25002 308502 2 24006 5 x 4 Iron A.53 Q 29 63000 25003 308503 3 400840 5 x 4 Iron S.53 M 22 230840 40840 308502 4 4008402 5 x 4 Iron A.53 M 23 230840 408402 308503 5 4008405 6.5 x 5 Iron S.53 M 39 2308406 40840 308502 6 4008406 6.5 x 5 Iron A.53 M 40 2308406 408402 308503 R - Drive Axle BEARINGS: Inner/Outer Cups: 592A / 572 Cones: 598A or 594A / 580 Seal O.D.: 6.3 AXLE/APPLICATION: Eaton - 2, 22, 23, 26, 402, 45, 46, 52 Spicer - 220, 230, 400, 460 Meritor - Q, R & S Series 7 2208753 6.5 x 7 Iron S 76 2308709 228724 308503 (8) - 5/8 8 4208753 6.5 x 7 Iron S 2.33 78 2308709 429203 308503 (8) - 5/8 9 2208754 6.5 x 7 Iron A 77 2308709 228725 30850 (8) - 5/8 0 4208754 6.5 x 7 Iron A 2.33 79 2308709 428725 30850 (8) - 5/8 R-Short - Drive Axle BEARINGS: Inner/Outer Cups: 592A / 572 Cones: 598A or 594A / 580 Seal O.D.: 6.3 AXLE/APPLICATION: Eaton - 2, 22, 23, 26, 402, 45, 46, 52 Spicer - 220, 230, 400, 460 Meritor - Q, R & S Series 2208738 6.5 x 7 Iron S 73 2308709 22878 308503 (8) - 5/8 2 4208738 6.5 x 7 Iron S 2.33 74 2308709 42920 308503 (8) - 5/8 3 220883 6.5 x 7 Iron A 74 2308709 22882 30850 (8) - 5/8 4 420883 6.5 x 7 Iron A 2.33 75 2308709 42930 30850 (8) - 5/8 5 2208752 6.5 x 7 Iron S 75 2308709 228805 308503 (8) - 3/4 6 4208752 6.5 x 7 Iron S 2.33 76 2308709 429204 308503 (8) - 3/4 7 2209302 6.5 x 7 Iron A 76 2308709 229302 30850 (8) - 3/4 8 4209302 6.5 x 7 Iron A 2.33 77 2308709 429302 30850 (8) - 3/4 Notes: For general notes, see page 2. M = 5.9 offset Q = 5.44 offset 30
Full Cast Full Cast Hub Piloted System: 0 Hole, 285.75mm Bolt Circle (CLN) Hub Piloted System: 0 Hole, 285.75mm Bolt Circle (CLN) Item Hub & Drum Brake Hub Wheel ABS Foot Drum Hub and Wheel # Part Number Size Material Usage Loc. Notes Weight Part # Bolt Bolt N - Trailer Axle BEARINGS: Inner/Outer Cups: HM2820/HM220 Cones: HM28248/HM22049 Seal O.D.: 6.00 AXLE/APPLICATION: Dexter-D225K Ingersoll-A22,F22 Meritor-TN, RQ, TQ,TQD,TNC Eaton-ETA225J, EST230J KB-KBW Spicer-D22,K22 4007 6.5 x 7 Lite Iron Steel Y 50 230872 40052 500006 2 4407 6.5 x 7 Lite Iron Steel 2.34 Y 5 230872 450052 500006 3 4008 6.5 x 7 Lite Iron Alum Y 5 230872 40053 500007 4 4408 6.5 x 7 Lite Iron Alum 2.34 Y 52 230872 450053 500007 5 40005 6.5 x 7 Alum Steel Y 45 230872 05773 0288 6 44005 6.5 x 7 Alum Steel 2.34 Y 45 230872 0578 0288 7 40006 6.5 x 7 Alum Alum Y 46 230872 05774 0290 8 44006 6.5 x 7 Alum Alum 2.34 Y 46 230872 05782 0290 9 403046 6.5 x 8.62 Lite Iron Steel T, Y 63 630000A 40052 500006 0 443046 6.5 x 8.62 Lite Iron Steel 2.34 T, Y 64 630000A 450052 500006 403047 6.5 x 8.62 Lite Iron Alum T, Y 64 630000A 40053 500007 2 443047 6.5 x 8.62 Lite Iron Alum 2.34 T, Y 65 630000A 450053 500007 3 403048 6.5 x 8.62 Lite Iron Steel U, Y 63 630006A 40052 500006 4 403049 6.5 x 8.62 Lite Iron Alum U, Y 64 630006A 40053 500007 5 443048 6.5 x 8.62 Lite Iron Steel 2.34 U, Y 64 630006A 450052 500006 6 443049 6.5 x 8.62 Lite Iron Alum 2.34 U, Y 65 630006A 450053 500007 P - Trailer Axle BEARINGS: Inner/Outer Cups: HM5840 / HM5840 Cones: HM58445 / HM58445 Seal O.D.: 6.00 AXLE/APPLICATION: Eaton - EST225P, EST230P Ingersoll-A24,F24 Spicer - P22 Fruehauf - PROPAR Meritor - TP 7 400 6.5 x 7 Lite Iron Steel Y 52 230872 40050 500006 8 440 6.5 x 7 Lite Iron Steel 2.2 Y 53 230872 450050 500006 9 4002 6.5 x 7 Lite Iron Alum Y 53 230872 4005 500007 20 4402 6.5 x 7 Lite Iron Alum 2.2 Y 54 230872 45005 500007 2 40024 6.5 x 8.62 Lite Iron Steel T, Y 68 630000A 40050 500006 22 44024 6.5 x 8.62 Lite Iron Steel 2.2 T, Y 69 630000A 450050 500006 23 40025 6.5 x 8.62 Lite Iron Alum T, Y 69 630000A 4005 500007 24 44025 6.5 x 8.62 Lite Iron Alum 2.2 T, Y 70 630000A 45005 500007 25 40023 6.5 x 7 Iron Steel Y, * 6 230872 43007 308503 26 44023 6.5 x 7 Iron Steel 2.2 Y, * 62 230872 453007 308503 27 400090 6.5 X 8.62 Iron Steel T, Y, * 65 630000A 43007 308503 28 440090 6.5 X 8.62 Iron Steel 2.2 T, Y, * 65 630000A 453007 308503 Notes: For general notes, see page 2. L = Lube fill: /4-8 NPTF Iron Hubs, 9/6-8 O-ring Seal Alum. Hubs T = For axles with 8.62" linings located at the 7" brake center U = For axles with 8.62" linings located inboard of the 7" brake location Y = Assembly includes an unbalanced drum * = Uses Thread-On Hub Cap 3
Full Cast Full Cast Stud Piloted System: 0 Hole, /4" Bolt Circle (DCN) Stud Piloted System: 0 Hole, /4 Bolt Circle (DCN) Item Hub & Drum R or L Brake Hub Wheel ABS Foot Drum Hub and Wheel Drive # Part Number Hand Size Material Usage Loc. Notes Weight Part # Bolt Bolt Studs FD - Front Axle BEARINGS: Inner/Outer Cups: 39520/3525 Cones: 3958/3585 Seal O.D.: 4.84 AXLE/APPLICATION: Meritor - FD93 4009204 R 5 X 4 Iron A, S.2 2 230840 409203 300840 2 4009205 L 5 X 4 Iron A, S.2 2 230840 409204 3008402 FF - Front Axle BEARINGS: Inner/Outer Cups: HM220/3720 Cones: HM22047 or 49/3782 Seal O.D.: 4.84 AXLE/APPLICATION: Eaton - EFA-2F4, EFA-3FS Meritor - FF94, FF942, FF943, FF96, FG94 Spicer - I00S, I20S, I40S Westport - F3W200, F3W400, F6W200, F6W400 3 4008509 R 5 X 4 Iron A, S.53 M 20 230840 408505 300840 4 400850 L 5 X 4 Iron A, S.53 M 20 230840 408506 3008402 5 4008737 R 5 X 4 Iron A, S.53 M 24 230840 408803 3008709 6 4008738 L 5 X 4 Iron A, S.53 M 24 230840 408804 300870 7 24007 R 5 X 4 Iron A, S.53 Q 29 630005 25004 3008709 8 24008 L 5 X 4 Iron A, S.53 Q 29 630005 25005 300870 R - Drive Axle BEARINGS: Inner/Outer Cups: 592A / 572 Cones: 598A or 594A / 580 Seal O.D.: 6.3 AXLE/APPLICATION: Eaton - 2, 22, 23, 26, 402, 45, 46, 52 Spicer - 220, 230, 400, 460 Meritor - Q, R & S Series 5 2208755 R 6.5 X 7 Iron A, S 74 2308709 228726 300840 (8) - 5/8 6 2208756 L 6.5 X 7 Iron A, S 74 2308709 228727 3008402 (8) - 5/8 7 4208755 R 6.5 X 7 Iron A, S 2.33 76 2308709 428726 300840 (8) - 5/8 8 4208756 L 6.5 X 7 Iron A, S 2.33 76 2308709 428727 3008402 (8) - 5/8 R-Short - Drive Axle BEARINGS: Inner/Outer Cups: 592A / 572 Cones: 598A or 594A / 580 Seal O.D.: 6.3 AXLE/APPLICATION: Eaton - 2, 22, 23, 26, 402, 45, 46, 52 Spicer - 220, 230, 400, 460 Meritor - Q, R & S Series 9 220880 R 6.5 X 7 Iron A, S 7 2308709 228722 300840 (8) - 5/8 20 2208802 L 6.5 X 7 Iron A, S 7 2308709 228723 3008402 (8) - 5/8 2 420880 R 6.5 X 7 Iron A, S 2.33 73 2308709 429307 300840 (8) - 5/8 22 4208802 L 6.5 X 7 Iron A, S 2.33 73 2308709 429308 3008402 (8) - 5/8 Notes: For general notes, see page 2. M = 5.9 offset Q = 5.44 offset 32
Full Cast Full Cast Stud Piloted System: System: 0 Hole, 0 Hole, /4" Bolt -/4 Circle Bolt (DCN) Circle (DCN) Item Hub & Drum R or L Brake Hub Wheel ABS Foot Drum Hub and Wheel Drive # Part Number Hand Size Material Usage Loc. Notes Weight Part # Bolt Bolt Studs N - Trailer Axle BEARINGS: Inner/Outer Cups: HM2820/HM220 Cones: HM28248/HM22049 Seal O.D.: 6.00 AXLE/APPLICATION: Dexter-D225K Ingersoll-A22,F22 Meritor-TN, RQ, TQ,TQD,TNC Eaton-ETA225J, EST230J KB-KBW Spicer-D22,K22 403002 R 2.25 X 7.50 Iron A, S K, Y 9 2663 4300 8690 2 403003 L 2.25 X 7.50 Iron A, S K, Y 9 2663 43002 86902 3 443002 R 2.25 X 7.50 Iron A, S 2.34 K, Y, Z 9 2663 45300 8690 4 443003 L 2.25 X 7.50 Iron A, S 2.34 K, Y, Z 9 2663 453002 86902 5 2809003 R 6.5 X 7 Iron A, S Y 59 230872 289003 300840 6 2809004 L 6.5 X 7 Iron A, S Y 59 230872 289004 3008402 7 4809003 R 6.5 X 7 Iron A, S 2.33 Y 59 230872 489003 300840 8 4809004 L 6.5 X 7 Iron A, S 2.33 Y 59 230872 489004 3008402 P - Trailer Axle BEARINGS: Inner/Outer Cups: HM5840 / HM5840 Cones: HM58445 / HM58445 Seal O.D.: 6.00 AXLE/APPLICATION: Eaton - EST225P, EST230P Ingersoll-A24,F24 Spicer - P22 Fruehauf - PROPAR Meritor - TP 9 2809303 R 6.5 X 7 Iron A, S Y 66 230872 289303 300840 0 2809304 L 6.5 X 7 Iron A, S Y 66 230872 289304 3008402 4809303 R 6.5 X 7 Iron A, S 2.2 Y 66 230872 489303 300840 2 4809304 L 6.5 X 7 Iron A, S 2.2 Y 66 230872 489304 3008402 Notes: For general notes, see page 2. K = 0/8.75 Y = Assembly includes an unbalanced drum Z = 80-tooth ABS rings for use with tire diameters 5" and 7.5" 33
Full Cast Full Cast Low Platform Trailer Trailer Applications Applications Item Hub & Drum Brake Hub ABS Wheel Foot Drum Hub and Wheel # Part Number Size Material Loc. Usage Notes Weight Part # Bolt Bolt Hub Piloted Mounting 8 Hole, 275mm Bolt Circle, Outboard Mounted Drum with M22 wheel bolts N - Trailer Axle BEARINGS: Inner/Outer Cups: HM2820 / HM220 Seal O.D.: 6.00 Cones: HM28248 / HM22049 AXLE/APPLICATION: SAE Configuration N 400038 2.25 x 7.50 Iron S Y 33 630002 40002 308503 2 440038 2.25 x 7.50 Iron S 2.34 Y, Z 34 630002 450002 308503 3 400067 2.25 x 7.50 Iron A Y 34 630002 400 30850 4 440067 2.25 x 7.50 Iron A 2.34 Y, Z 35 630002 4500 30850 P - Trailer Axle BEARINGS: Inner/Outer Cups: HM5840/HM5840 Cones: HM58445/HM58445 Seal O.D.: 6.00 AXLE/APPLICATION: SAE Configuration P 5 40007 2.25 x 7.50 Iron S Y 43 630002 43020 308503 6 44007 2.25 x 7.50 Iron S 2.2 Y, Z 44 630002 453020 308503 7 40008 2.25 x 7.50 Iron A Y 44 630002 4302 30850 8 44008 2.25 x 7.50 Iron A 2.2 Y, Z 45 630002 45302 30850 Stud Piloted Mounting 0 Hole, 8.75" Bolt Circle, Inboard Mounted Drum with 3/4-6 bolts N - Trailer Axle BEARINGS: Inner/Outer Cups: HM2820 / HM220 Seal O.D.: 6.00 Cones: HM28248 / HM22049 AXLE/APPLICATION: SAE Configuration N 9 403002 R 2.25 x 7.50 Iron A, S Y 9 2663 4300 8690 0 403003 L 2.25 x 7.50 Iron A, S Y 9 2663 43002 86902 443002 R 2.25 x 7.50 Iron A, S 2.34 Y, Z 9 2663 45300 8690 2 443003 L 2.25 x 7.50 Iron A, S 2.34 Y, Z 9 2663 453002 86902 Notes: For general notes, see page 2. Y = Assembly includes an unbalanced drum Z = 80-tooth ABS rings for use with tire diameters 5" and 7.5" 8 Hole, Hub Piloted Assembly 0 Hole, Stud Piloted Assembly 34
LITERATURE ORDER FORM Literature may also be ordered or downloaded from our website: www.motorwheelcvs.com Ship to: ATTN: Date ordered: Ordered by: Quantity Form Ordered Number Description CATALOGS 2-08 Print Catalog HUB & DRUM LITERATURE 4-004 Genuine CentriFuse Brake Drum Applications Tri-fold Brochure 4-090 CentriFuse "Accept No Substitutes" flyer 4-099 CentriFuse Wide Brake Advantage flyer CentriFuse "Ultimate Weight Savings" over Cast Drums flyer CentriFuse Severe Service flyer 4-084 CentriFuse Lite - Lightweight Brake Drum Sales Sheet Brake Drum Cross Reference Sheet 4-02 CentruCast Brake Drum Sales Sheet P07 Installation Procedures Poster 4-7008 CentriSet Hub Systems Tri-Fold Brochure 4-022 0 Hole Ductile Iron Hub & Cast Drum Assy (Lowboy) Sales Sheet 4-023 8 Hole Ductile Iron Hub & Cast Drum Assy (Lowboy) Sales Sheet 4-05 Stemco Advantage Hub System Sales Sheet WARRANTIES 4-005 Genuine CentriFuse Brake Drum 0-Year Warranty 4-002 CentriFuse Lite Brake Drum 0-Year Warranty 4-007 CentruCast Hub & Drum Year Limited Warranty 4-2008 CentriSet Hub System Warranty 57-3030 Stemco Advantage Hub System Warranty TD TD2 TD3 TD4 TD5 TD7 TD8 TD9 TD0 TD TD2 TECH DATA SHEETS TechData: Recommended Torque TechData: Description of Engineering Tests TechData: Lubrication of System TechData: Brake Drum Mounting Procedures TechData: Nut Clamping Force Loss TechData: Paint Effect on Torque Tension TechData: Nut Tightening Procedure TechData: Loose Wheel Causes & Conditions TechData: Wheel Nut Clamping Force TechData: Belleville Washer Effect TechData: Brake Drum Mounting Problems MISCELLANEOUS 33850 Motor Wheel Hub Piloted Wheel System Installation Labels SQA 3- Berea Plant ISO 900 Quality Certificate SQA 3-E Berea Plant ISO 400 Quality Certificate Please submit literature request form by email or fax: email: lsheeder@motorwheelcvs.com fax: (734) 46-94 35
WHEEL BOLTS Wheel Bolts Part # Thread Finish Code A Overall Length B Thread Length C Head Diameter D Serration Diameter E Shoulder Length Head Marking 86797 86798 8742 8743 8739 87320 8808 8809 89085 89086 89087 89088 90092 500000 50000 500004 30850 308502 308503 300840 3008402 3008709 300870 LH LH LH LH LH LH LH LH 3/4-6 -/8-6 3/4-6 -/8-6 -/8-6 -/8-6 M22X.5 M22X.5 M22X.5 M22X.5 M22X.5 M22X.5 M22X.5 3/4-6 3/4-6 -/8-6 -/8-6 3 3 3 3 3.02 3.56 2.5 2.96 2.96 3.27 4.3 5. 4. 3.25 4.59 3.7 3.66 2.60 2.60 3.5 3.5.22.80.25.96.96 2.27 2.3 3.59 2.59 2.0 3.35.93 2.42.28.28.9.9.3.50.9.50.50.50.50.69.69.26.26.26.26.26.26.54.54.00.25 0.8.25.25.25.25 0.933 0.933 0.94 0.94 0.94 0.94 0.94 0.94.25.25.39.68.06.00.00.00.87.7.7 0.9 0.9 0.9 0.9 0.98 0.98 0.96 0.96 092 500000 50000 500004 WQ WR WK VK VK VH VH Wheel Bolts: Serrated Part # Thread Finish Code A Overall Length B Thread Length C Head Diameter D Serration Diameter E Shoulder Length Head Marking 88799 88836 89620 90427 90807 900 904 905 90575 90576 500006 500007 LH LH M22X.5 M22X.5 M22X.5 M22X.5 M22X.5 M22X.5 3/4-6 -/8-6 M22X.5 M22X.5 4.22 3.58 4.80 3.46 3.20 3.20 2.5 2.88 3.42 4.42 3.06 2.5 3.73 2.7 2.5 2.3.32.96 2.58 3.58.62.62.62.70.62.62.62.70 0.98 0.98 0.98.23 0.98 0.98 0.98.23 0.89 0.89 0.85 0.85 0.85 0.94 0.73 0.73 0.85 0.85 0.5 0.5 799 836 620 427 807 00 4 5 575 576 500006 500007 Wheel Bolts: Non-Serrated, Clipped Head FINISH CODES: -PHOSPHATE & OIL 3-ZINC GOLD DICHROMATE.47.47 ake Drums Wheel Nuts Wheel Bolts er Service eel Mexico ssemblies 36 Body