How sustainable Maintenance and Asset Management put your company in the fast lane New approach for the automotive industry
Maintenance in the automotive industry Driving billions 292 billion euros that is the investment it would take to replace all of the production assets in the automotive industry of the 28 member states of the European Union. This figure includes all production systems and equipment operated in 20 by automotive manufacturers and suppliers. What is more the annual maintenance budget of the automotive industry amounts to 46,4 billion euros covering all direct maintenance costs as well as indirect maintenance costs caused by technical production downtimes or five percent of the industry s annual turnover. A worldwide survey of the cost structure in main industries supports these figures and the contribution of a sustainable maintenance and asset management to a profitable and flexible productive output (see fig. 1). The percentage of maintenance costs in relation to overall production costs varies widely from one industry to the other. As a general rule maintenance cost correlate with the equipmentintensity and complexity of production plants. In the automotive industry maintenance costs are especially important due to the high degree of automation. Considering this development up to 40 percent of the influenceable production costs in the automotive industry are related to maintenance and asset management. This is a significant lever for the sucess of the company. Obviously production efficiency is extremely important. Nevertheless standstill of production is a much too common occurrence and responsible for losses running into billions of euros for Europe s automotive industry. But what are the future challenges for a sustainable asset management and where are the automotive companies today? Selected industries Direct maint. costs [%] Indirect maint. costs [%] ø influenceable production costs [%] Chemicals/pharmaceuticals 15 30-45 45-60 Pulp & paper/wood 20-35 32-47 Automotive 10 20-30 30-40 Semi conductors/electronics 10 20-30 30-40 Steel/metal 10-25 22-37 Utilities 14-15 26-29 Mechanical engineering/tool making/ aircraft building 6-18 18-24 Source: Average empirical value from ConMoto projects Figure 1: Average controllable production costs 1) Source: Eurostat, Destatis, own calculations 2
Future challenges to production and maintenance The automotive industry is in a state of flux. World wide production is growing and companies are investing billions. The money is invested in modernizing and expanding existing production sites as well as opening new sites in emerging economies. Companies have to deal not only with regional shifts in markets and production locations but also with specific risks and chances generated by a highly competitive business environment. Volatility is the new normal. Technological innovation, ever shorter product life cycles, new technical guidelines, and binding technical standards are additional cost-pushing factors. As a result profit margins of the OEMs are shrinking due to pricing competition, rising production costs, and high capital intensity. Examples of technological differences and resulting challenges to maintenance and asset management: Press line: high degree of automation (hydraulic systems/electronics); requires intensive maintenance. Coating & painting plants: extremely high degree of automation; high-level of maintenance due to cleanliness requirements. Body shell production: high degree of automation characterized by robotics and sensor technology; First line maintenance by technical production staff is common. Assembly lines: partly automated (especially in conveyor systems); Autonomous maintenance is less common, as production workers are working in tact time; small variety of spare parts. In consequence the suppliers find themselves in a fix, as they are under massive pressure to adapt to the new conditions. They have to deal with strong competitors when supplying standard products and also have to meet lower prices demanded by OEMs, who are concentrating on an ever decreasing number of suppliers. Co-operation by automobile manufacturers and the wide-ranging introduction of modular systems and strategies bring additional pricing pressure. Production plants have to run smoothly and reliably. Day by day. Machines have to be used to their full capacity. That is one of the major challenges for a profitable global production system. Those in charge are very aware, that they have to get more out of their production plants. At the same time a growing range of variants calls for maximum flexibility of production processes and the machines involved. Moreover the trend towards automation and digitalization along the valuechain embodied in the fourth industrial revolution (Industry 4.0) increases the complexity of production systems and presents new challenges to a comprehensive maintenance and asset management. Some proceedings, for example in coating, have similarities with the process industry when comparing shutdowns for cleaning, revision, maintenance or inspection. The most important prerequisites of a sustainable and highly efficient production system are outmost reliability, Overall Equipment Effectiveness (O.E.E.), plant availability, and stable processes. These factors have to go hand in hand with maintenance, repair and technical optimization. The status analysis which is a vital part of all ConMoto projects highlights that a lot of automotive OEMs and suppliers have some catching-up to do. 3
The pages 4 to 7 are not included in this preview. Should you be interested in the whole White Paper "How sustainable Maintenance and Asset Management put your company in the fast lane New approaches for the automotive industry", please contact: Carina Ruf Communication Manager GmbH Boschetsrieder Str. 69 81379 Munich Phone: +49 89 780 66-138 Fax: +49 89 780 66-101 Email: ruf@conmoto.de 6
Nils Blechschmidt Managing Director GmbH Managing Director ConMoto Strategie und Realisierung Tel.: +49 (0)89 780 66-114 Fax: +49 (0)89 780 66-101 E-Mail: blechschmidt@conmoto.de Nils Blechschmidt has been a management consultant since 1995 at ConMoto and since 1999 he is a main shareholder of the company. He is the driving force behind the consulting field Value oriented Maintenance and Asset Innovation. As a top expert in this area and with well-founded knowledge of various sectors, such as the automotive and component supplier industry, aerospace industry, engineering and plant construction, semiconductors/ electronics, process industry (chemicals, pharmaceuticals, steel, food), plastics processing industry and transport technology, he gives numerous lectures. Before his time at Con- Moto, Nils Blechschmidt was employed as the Technical Head of an aircraft maintenance business for seven years. He completed his education as a Dipl.-Ing. (graduate engineer) in aerospace technology at the University of the Bundeswehr in Munich and gained his MBA at Henley Management College (UK). GmbH, Munich Boschetsrieder Str. 69 81379 Munich Tel.: +49 (0)89 78066-0 Fax: +49 (0)89 78066-101 Ges.m.b.H, Vienna Schottenring 16 1010 Vienna Austria Tel.: +43 (0)1 5850274-0 Fax: +43 (0)1 5850274-11 ConMoto LeanSupport s.r.o., Bratislava Na vŕšku 8 811 01 Bratislava Slovakia Tel.: +421 (0)2 54413304 Fax: +421 (0)2 54410635 GmbH, Stuttgart Gerokstr. 11 70184 Stuttgart Tel.: +49 (0)711 76779-0 Fax: +49 (0)711 76779-205 GmbH, St. Gallen Notkerstr. 10 9000 St. Gallen Switzerland Tel.: +41 (0)71 2440871 Fax: +41 (0)71 2431881 Co. Ltd., Shanghai Unit 1606, Time Square 93 Huai Hai Zhong Rd. 200021 Shanghai People's Republic of China Tel.: +86 (0)21 614152-75 Fax: +86 (0)21 614152-76 info@conmoto.de www.conmoto.de www.conmoto-consulting.com Inspiring solutions. Implemented. 5