Installation Manual CLIFC Fan & Coil Variable Speed
General Description GENERAL DESCRIPTION FANS EQUIPMENT Totally Factory assembled within the unit all piping, wiring, and required controls for operation controls are included. FEATURES All fan coils are manufactured with heavy gauge galvanized steel to resist corrosion. All models are approved for installation with 0 clearance to combustible material. INSULATION Plenums and cabinets are insulated with Tuf-Skin dual density fiber glass blanket insulation with an antimicrobial agent. Ceiling Panels - Hinged access/return panels are manufactured with heavy gauge galvanized steel with captive mounting screws and an attractive white baked powder finish. CONDENSATE PANS Positive sloped drain pans are galvanized steel, coated on the inside surface with a U.L. Listed closed cell, fire retardant, foam insulation. Pan includes both primary and secondary drain connections. THERMOSTAT ALERTON, Programmable smart thermostat, CONTROL Two-way valve with modulating actuator VRW The Climate-Flex teams are pioneers in the VRW technology. The most important advantages are lossless performance tones, used water as heat medium, requires no special installation, far better performance at a lower cost. COILS Constructed with seamless copper tubes and headers. The tubes are mechanically expanded into corrugated aluminum fin material for a permanent primary to secondary surface bond. Coils are tested under water at 350 PSI for operation at 300 PSI. Coils include manual air vents. Wheels-Housing - are double width, double inlet (DWDI) forward curved, centrifugal type. Wheels are statically and dynamically balanced for smooth, quite operation. The housing is constructed from heavy gauge galvanized steel with die-formed inlet cones. ECM Motor The ECM motor option includes 24V controls, a constant torque, permanent magnet, brushless DC motor, with variable speed. RETURN AIR PLENUMS - Return air plenums are manufactured from galvanized steel insulated with Tuf-Skin dual density fiber glass blanket insulation and a 1 TA fiber glass filter. ADSIL The inorganic film that happens is an ultra-thin (thin) form, inert ceramic glass and is accomplished at ambient temperatures. This disruptive technology produces a clear film that provides: UV resistance A crystalline finished, non-yellowing Movie positively charged for H2O repellent Magnificent luster and depth of image retention Outstanding resistance to solvents and chemicals Exceptional abrasion resistance. SAVE ENERGY: With ADSIL you save energy between 9% to 15%. Its sealant layer of only 3-5 microns allows heat transfer be more efficient. EXTENDS THE LIFE OF EQUIPMENT: With ADSIL EXTENDS the life of your air conditioners, refrigerators or cooling towers, because it protects to for 5 years, PRESERVING its appearance and function. ADSIL applies in cabinets, capacitors, grids and coils, achieving great benefits and durability that no obtained with conventional protections.
Clima-Flex Units CLIFC 400, 600, 800, 1000 y 1200 CFM Efficiency CLIMAFLEX FAN & COIL VARIABLE SPEED. are designed to comply with all requirements on all comercial and residencial proyects. water cooled units obtain the exact required capacity on the proyect. Capacities for Fan & Coil Variable Speed CLIMAFLEX units is from 400, 600, 800, 1,000 y 1,200 CFM. Operation Fan & Coil Variable Speed CLIMAFLEX operation is quiet, and their design allow an easy, fast, and low price Quality Fan & Coil Variable Speed - CLIMAFLEX Are manufactured, and tested under the most estricts quality standars, and include safety components that allow us to offer a high quality product.
Nomenclature CLIFC D 400 R V 1 2 3 4 5 1 Serial CLIFC Fan & Coil 2 Type D Ducted Type 3 Capacity 400 400 CFM 600 600 CFM 800 800 CFM 1,000 1,000 CFM 1,200 1,200 CFM 4 Side conections L Left Side R Right Side 5 Fan Type V Variable Speed
Units Schedule UNITS Ceiling Horizontal MODEL CLIFC-D Coil 4 Row 3 Row Cooling + 1 Heating Cooling Yes Yes Heating No Yes Advantage VRW technology. VRW technology. FANS Fan Quntity 1 1 Fan Type Centrífugal Centrífugal Motor / Drive ECM Motor Variable Air Flow ECM Motor Variable Air Flow THERMOSTAT Type Programmable smart thermostat Programmable smart thermostat VALVE Valve Two-way valve Two-way valve Type Modulating actuator Modulating actuator MOTOR Type Variable Speed Variable Speed ELCTRICAL Electrical Characteristics 120VAC / 1 Ph / 60 Hz 120VAC / 1 Ph / 60 Hz DRAIN PANS Standard Drain Pan Yes Yes Extended Drain Pan Yes Yes Stainless Steel Standard Drain Pan Yes Yes Stainless Steel Extended Drain Pan Yes Yes INSULATION Foil Faced Insulation Yes Yes Fiberglass Insulation Yes Yes ADSIL Adsil Yes Yes
Units Schedule F&C Rated current (A) ELECTRICAL DATA FAN THERMOSTAT UNIT RPM Watts Volts PH Hz Rated current (A) Watts Volts PH Hz. Volts PH Hz RLA (A) weight Kg Air flow (CFM) 400 / 600 0.5 815 0.038 120 1 60 0.5 0.012 120 1 60 120 1 60 1 35 / 37 400 / 600 800 0.64 850 0.05 120 1 60 0.5 0.012 120 1 60 120 1 60 1.14 42 800 1,000 0.62 687 0.048 120 1 60 0.5 0.012 120 1 60 120 1 60 1.12 50 1,000 1,200 1 815 0.076 120 1 60 0.5 0.012 120 1 60 120 1 60 1.5 54 1,200 UNIT CLIFC AHRI APPROVED STANDARD RATINGS UNIT SIZE COIL ROWS NOMINAL CFM GPM COOLING CAPACITY Total MBtuh Sensible MBtuh 400 400 2.5 12.1 8.8 600 600 3.6 17.3 13.0 800 3 800 4.6 22.6 16.2 1,000 1,000 5.5 27.5 21.0 1,200 1,200 6.6 32.8 25.0 400 400 2.8 13.8 9.8 600 600 4.0 19.6 14.3 800 4 800 5.2 25.5 18.8 1,000 1,000 6.2 31.0 22.0 1,200 1,200 7.5 37.2 27.7
Electrical Diagram CLIFC-D
Dimensions CLIFC-D NOTES: 1) ALL DIMENSIONS IN INCHES. 2) COIL CONNECTION TOLERANCE ± 1/4. 3) RIGHT HAND UNIT SHOWN, LEFT HAND MIRROR IMAGE. (HAND IS DETERMINED BY FACING THE BLOWER END) GENERAL DIMENSIONS MODEL A B C D E FILTER SIZE (INCL.) CLIFC-D-400 30 28 26-1/8 36-1/8 33-1/4 10 X 30 CLIFC-D-600 34 32 30-1/8 40-1/8 37-1/4 10 X 34 CLIFC-D-800 40 38 36-1/8 46-1/8 43-1/4 10 X 40 CLIFC-D-1000 46 44 42-1/8 52-1/8 49-1/4 10 X 46 CLIFC-D-1200 53 51 49-1/8 59-1/8 56-1/4 10 x 53 CONNECTIONS PRIMARY O.D. 5/8