Metal Roofing. Contents

Metal Roofing Contents Features & Benefits...2 Profile Selector... Colors...4 Warranty... Flashing & Trim Details...6 Corrugated...8 SM-Rib...9 & R... 0... Accessories...2 Detailed Profiles... Fastener Placement... 4 Helpful Hints... Critical Storage Information...6 Construction Metals Inc. 002 Birtcher Dr., Jurupa Valley, CA 92 800-6-980 Fax: 909-90-98 constructionmetals.com

Features and Benefits Gibraltar Metal Roofing delivers style, strength and lasting value to residential, commercial and agricultural roofing. Every panel and trim component is manufactured to the highest Gibraltar standards and backed by our dedication to service. Gibraltar has a proud tradition of working with both professional contractors and do-it-yourselfers. Metal Roofing has the Lowest Maintenance and Lifetime Roof Cost 2 to times longer life than traditional composition roofs 0+ MPH High Wind Rating: Miami-Dade, UL Class A Fire Rating Impact Resistant. UL 228. Does not promote the growth of algae, mildew or toxic mold Environmentally friendly, 00% recyclable material. Gibraltar Metal Roofing panels are produced with 60% to 6% recycled steel. Energy Efficient: Up to 20% savings on heating and cooling, even more when you choose our new Energy Star certified colors. Can be installed over existing shingles, eliminating significant tear-off and disposal costs. Available in styles and contemporary colors to complement any architectural style. Gibraltar Metal Roofing Panels and Trim have sharp edges. Always wear protective clothing and gloves. Do not store metal roofing in an area where moisture can accumulate. Bundled metal roofing must be covered with a breatheable tarp (do not use plastic) and stored on a slant to permit drainage. Metal roofing must be stored properly in transit or on the job site. To avoid rust stains, remove metal shavings/particles after drilling. Failure to comply with these storage procedures relieves the manufacturer of responsibility for any resultant damage to, or deterioration of, the product and voids all warranties. There is no implied warranty of merchantability or fitness for purpose. Construction Metals Inc. 002 Birtcher Dr., Jurupa Valley, CA 92 800-6-980 Fax: 909-90-98 constructionmetals.com 2

CORRUGATED Profile Selector Typical Applications: Architectural, Residential, Light Commercial/Industrial Post-Frame Buildings, Garages, Porches, Gazebos. Retrofit over existing roof. 2 /2 inch SM_RIB Corrugated Finish/Substrate Gauge Warranty Certifications & Testing Galvanized 29 - UL 90 Fire Resistance Class A Painted/Galvanized 26 0 Year 2 /2 in. Coverage SM-Rib & R PANEL 6 in. Coverage Galvalume 26, 29 2 Year UL 228 Impact Resistance Class 4 UL 80 Uplift UL Class 90 Painted/Galvalume Metro Dade: PA 4 Static Air Press Pos/Neg Resistance 26, 29 0 Year Metro Dade: PA 00 Wind Driven Rain Infiltration Acceptance No. 0-8924.0 Florida Building Code: FL-96- SEM_LOK 6 in. Coverage Galvalume 29 2 Year UL 90 Fire Resistance Class A Painted/Galvalume 26, 29 0 Year UL 228 Impact Resistance Class 4 UL 80 Uplift UL Class 90 Standing Seam Painted/Galvalume 26 0 Year 2 in. Coverage The lower the gauge number, the thicker the metal. 29 gauge is the minimum thickness recommended for residential applications. Construction Metals Inc. 002 Birtcher Dr., Jurupa Valley, CA 92 800-6-980 Fax: 909-90-98 constructionmetals.com

Available Colors Energy Star qualified roof products reflect more of the suns rays. This can lower roof surface temperatures by up to 00 F, decresing the amount of heat transferred into a building, helping to reduce peak cooling demand by 0-% Corrugated: 29 Gauge unless otherwise noted. ENERGY STAR QUALIFIED Galvanized CW:Cotton White TAN:Tan SM-Rib: 6 inch panels. 26 & 29 Gauge. CW: Cotton White BZ: Bronze BE: Raffia Beige CL: Clay DG: Dove Gray AI: Antique Ivory BDW: Brandywine RBL: Regal Blue RBR: Royal Brown TC: Terra Cotta FG: Forest Green BL: Blue CG: Charcoal Gray LG: Leafy Green RD: Bright Red SC: Simulated Copper : 6 inch panels. Roofing: 26 Gauge; Siding: 29 Gauge. CW: Cotton White BZ: Bronze BE: Raffia Beige CL: Clay DG: Dove Gray AI: Antique Ivory BDW: Brandywine RBL: Regal Blue RBR: Royal Brown TC: Terra Cotta FG: Forest Green BL: Blue CG: Charcoal Gray LG: Leafy Green RD: Bright Red SC: Simulated Copper : 2 inch Standing Seam panels. 26 Gauge. CW: Cotton White BZ: Bronze BE: Raffia Beige CL: Clay DG: Dove Gray AI: Antique Ivory BDW: Brandywine TC: Terra Cotta FG: Forest Green BL: Blue CG: Charcoal Gray Colors samples printers' representations. For more precise color matching request a metal color sample. Construction Metals Inc. 002 Birtcher Dr., Jurupa Valley, CA 92 800-6-980 Fax: 909-90-98 constructionmetals.com 4

Warranties Metal Roofing Finish Warranties: What is covered? GALVANIZED - Steel substrate coated with molten zinc in a hot bath dip action providing a coating thickness of.90 ounces of zinc (G90) per square foot of panel top and bottom. Warranty - NONE Coverage - NONE Properties - Galvanized coating is roughly 98% zinc with a small amount of silicon to promote proper flow. The shade and spangle (patchy appearance of the coating) are due to impurities in the zinc and can vary. Zinc coating is a sacrificial weak metal coating that will sacrifice itself to protect the noble metal (in this case steel) from galvanic chemical reaction accelerated by moisture from humidity, condensation, rain, and snow. 2 YEAR GALVALUME - Steel substrate coated with a molten hot dip action providing a coating thickness of. ounces of zinc/aluminum (AZ) per square foot of panel top and bottom. Warranty - 2 year limited warranty, pro-rated from year, non-transferable, must be installed within the continental US. Coverage - for a period of 2 years the panel will not perforate due to red rust provided the project the material is installed on meets the limitations of a minimum slope of :2 or greater, not used for animal confinement, is installed within the contiguous United States, and is not within /2 mile of an aggressive environment such as, but not limited to, salt water. Due to the characteristics of the metallic coating, cosmetics cannot be controlled and are not covered by the limited warranty. This metallic coating can and will weather nonuniformly. Galvalume coating was developed as a functional finish for projects where aesthetics are not a major concern. Properties - Galvalume is a mixture of roughly 4% zinc and % aluminum with a small amount of silicon to promote an even flow over the substrate. This coating also derives its shade, size, and pattern of spangle from the impurities in the elements of the molten hot dip bath. 0 YEAR - Galvalume or steel substrate coated with zinc then finished with a silicone polyester paint system consisting of a primer coat top and bottom and the primary color applied to the top of the panel. Warranty - 0 year limited warranty, pro-rated from year, non-transferable, must be installed within the continental US. Coverage - Paint peel, check, chip, or crack resulting from a manufacturers defect for a period of 40 years from the date of invoice providing the project the material is installed on meets the limitations of a minimum slope of :2 or greater, not used for animal confinement, is installed within the contiguous United States, and is not within 000 feet of an aggressive environment such as, but not limited to, salt water. Excessive chalk and fade is covered for the first 0 years (note: chalk and fade occur normally as the binders and pigments of the paint system break down, fade is expected to be uniform with equal exposure to the sun). Construction Metals Inc. 002 Birtcher Dr., Jurupa Valley, CA 92 800-6-980 Fax: 909-90-98 constructionmetals.com

Flashing & Trim Details BD- Base Drip 6 BD-2 Base Drip: 2 inch 2 4 CF- Counter Flashing CL- Cleat 6 SM-Rib, 4 4 4 4 CL-2 Cleat Offset DA- Double Angle 6 DA-2 Double Angle 2 DC- Drip Cap 2 9 6 SM-Rib 6 4 4 4 Corrugated, SM-Rib 6 DC-2 Drip Cap 2 6 EF- Gable Flashing 6 4 2 4 EF- Eave Flashing 4 2 EF- Eave Flashing VARIES 2 4, Post Frame SM-Rib SM-Rib,, 6 Specify angle when ordering. EW- Endwall Flashing GF- Gambrel Flashing GR-2 Gable Rake & Corner GR- Rake Flashing 4 6 VARIES Specify angle when ordering. 4 VARIES 6 6 6 4 6 4 6 Corrugated,, SM-Rib 4 Specify angle when ordering., SM-Rib, Corrugated, SM-Rib GR-6 Rake & Corner 4 4 GR- Gable Rake 2 6 HS-2 Highside Eave VARIES IS- Inside Corner 4 Specify angle when ordering. SM-Rib, 4 Construction Metals Inc. 002 Birtcher Dr., Jurupa Valley, CA 92 800-6-980 Fax: 909-90-98 constructionmetals.com 6

Flashing & Trim Details JC- J-Channel JC-6 J-Channel JC- J-Channel PC-, 2,, 4 Post Cover 9 6 4 6 6 6 Corrugated, SM-Rib PC- Shown Corrugated, SM-Rib, 6 PV- Preformed Valley PV-2 (8 4 in. arms, /2 in. Hems) RC-2 Flat Ridge Cap RC-8 Vented Ridge Cap SSW- Shingle Sidewall 9 2 Corrugated, 4 VARIES Specify pitch when ordering. SM-Rib, VARIES 6 Specify pitch when ordering. Corrugated,, SM-Rib 6 SW- Sidewall Flashing SW-2 Sidewall Flashing TC- Track Cover TF- Transition Flashing 4 2 4 VARIES 6 4 Corrugated,, SM-Rib 4 SM-Rib, 6 Specify angle when ordering. Corrugated,, SM-Rib, ZC- Z-Closure Vented Ridge Corrugated, SM-Rib VRBP Vented Ridge RC-8 VRBP RC-8 VRBP Panel Deck in. Max. JC-6 Closure Strip Batten Pop Rivet Panel Deck ZC- in. Max. JC- Sealant Panel RC-8 Deck Vented Ridge in. Max. JC- Closure Strip VRBP Batten CRC0G Corrugated Ridge Cap Tape Sealant Required Purlin CRC0G /4 in. Max. Construction Metals Inc. 002 Birtcher Dr., Jurupa Valley, CA 92 800-6-980 Fax: 909-90-98 constructionmetals.com

CORRUGATED Corrugated Prices are for panels ft. 2 ft., cut to the inch. 2 /2 inch Corrugated Model Description 2 /2 in. Coverage CR-GALVANIZED CR-GALVANIZED-26 CR-[Color Code]-26 Galvanized, 29 Gauge Galvanized, 26 Gauge 0 Year Painted Galvanized, 26 Gauge AVAILABLE COLORS Colors samples are printers' representations. For more precise color matching request a metal color sample. Galvanized CW:Cotton White TAN:Tan FLASHING & TRIM 2 6 4 Model Description PV- Preformed Valley - No Hem 2 RC-2 Ridge Cap Residential 2 CRC0G Corrugated Ridge Cap SW- Sidewall Flashing 4 TF- Transition Flashing EW- Endwall Flashing 6 EF- Eave Flashing Construction Metals Inc. 002 Birtcher Dr., Jurupa Valley, CA 92 800-6-980 Fax: 909-90-98 constructionmetals.com 8

SM_RIB SM-Rib Prices are for panels ft. 2 ft., cut to the inch. 6 in. Coverage Architectural exposed fastener panel. 9 in., on center, spacing major ribs with equally spaced stiffening ribs. /4 in. major rib height. Minimum Slope is :2. Typical Applications: Architectural, Residential, Light Commercial/Industrial, Post-Frame Buildings, Garages, Porches, Gazebos. Retrofit over existing roof. Model SM-GALVALUME SM-GALVALUME-26 SM-[color code] SM-[color code] Description 2 Year Galvalume, 29 Gauge 2 Year Galvalume, 26 Gauge 0 Year Painted Galvalume, 29 Gauge 0 Year Painted Galvalume, 26 Gauge AVAILABLE COLORS. 29 and 26 Gauge unless otherwise noted. ENERGY STAR QUALIFIED CW: Cotton White BZ: Bronze BE: Raffia Beige CL: Clay DG: Dove Gray AI: Antique Ivory BDW: Brandywine RBL: Regal Blue RBR: Royal Brown TC: Terra Cotta FG: Forest Green BL: Blue CG: Charcoal Gray LG: Leafy Green Colors samples are printers' representations. For more precise color matching request a metal color sample. RD: Bright Red SC: Simulated Copper FLASHING & TRIM 2 4 2 0 9 8 6 Construction Metals Inc. 002 Birtcher Dr., Jurupa Valley, CA 92 800-6-980 Fax: 909-90-98 constructionmetals.com 9

SM-Rib FLASHING & TRIM Model Description RC-2 Ridge Cap RC-8 Ridge Cap (for use with ridge vent) 2 PV- Preformed Valley GR-2 Gable Rake & Corner (for use with metal siding) JC-6 J Channel Ridge Vent 4 DC- Drip Cap (for use with metal siding) EF- Eave Flashing 6 EW- Endwall Flashing GF- Gambrel Flashing 8 TF- Transition Flashing 9 SW- Sidewall Flashing 0 IS- Inside Corner (for use with metal siding) BD- EF- Base Drip (for use with metal siding) Gable Flashing DA- Double Angle (for use with metal siding) TC- Track Cover Universal PC- Post Cover 2 x 4 PC-2 Post Cover 2 x 6 PC- Post Cover 2 x 8 PC-4 Post Cover 2 x 0 HS-2 High Side Eave (for single slope roof) Lineal Trims and Flashings are sold in 0 foot lengths unless otherwise specified. See pages & 8 for detailed drawings of Flashing & Trim. See page 6 for fasteners, closure strips and accessories pricing. Construction Metals Inc. 002 Birtcher Dr., Jurupa Valley, CA 92 800-6-980 Fax: 909-90-98 constructionmetals.com 0

& R PANEL Prices are for panels ft. 2 ft., cut to the inch. Model Description 6 in. Coverage Architectural exposed fastener panel. 2 in., on center, spacing major ribs with equally spaced stiffening ribs. /8 in. major rib height. Minimum Slope is :2. Typical Applications: Architectural, Residential, Light Commercial/Industrial, Post-Frame Buildings, Garages, Porches, Gazebos. Retrofit over existing roof. -GALVALUME -GALVALUME-26 -[color code] -[color code]-26 2 Year Galvalume, 29 Gauge - 2 Year Galvalume, 26 Gauge - 0 Year Painted Galvalume, 29 Gauge - 0 Year Painted Galvalume, 26 Gauge - AVAILABLE COLORS. Roofing: 26 Gauge, Siding: 29 Gauge ENERGY STAR QUALIFIED CW: Cotton White BZ: Bronze BE: Raffia Beige CL: Clay DG: Dove Gray AI: Antique Ivory BDW: Brandywine RBL: Regal Blue RBR: Royal Brown TC: Terra Cotta FG: Forest Green BL: Blue CG: Charcoal Gray LG: Leafy Green Colors samples are printers' representations. For more precise color matching request a metal color sample. RD: Bright Red SC: Simulated Copper FLASHING & TRIM 2 4 4 6 2 0 9 8 Construction Metals Inc. 002 Birtcher Dr., Jurupa Valley, CA 92 800-6-980 Fax: 909-90-98 constructionmetals.com

FLASHING & TRIM Model Description RC-2 Ridge Cap 2 EF- Eave Flashing PV- Preformed Valley 4 JC- J Channel 4 RC-8 Ridge Cap (for use with ridge vent) EW- Endwall Flashing 6 TF- Transition Flashing GF- Gambrel Flashing 8 TC- Track Cover Universal 9 GR- Gable Rake 9 GR-6 Gable Rake & Corner 9 GR- Gable Rake 0 DC-2 Drip Cap BD-2 IS- Base Drip Inside Corner PC- Post Cover 2 x 4 PC-2 Post Cover 2 x 6 PC- Post Cover 2 x 8 PC-4 Post Cover 2 x 0 4 SW-2 Sidewall Flashing DA-2 Double Angle HS-2 High Side Eave (for single slope roof) Lineal Trims and Flashings are sold in 0 foot lengths unless otherwise specified. See pages & 8 for detailed drawings of Flashing & Trim. See page 6 for fasteners, closure strips and accessories pricing. Construction Metals Inc. 002 Birtcher Dr., Jurupa Valley, CA 92 800-6-980 Fax: 909-90-98 constructionmetals.com 2

SEM_LOK Snap Lock Model Prices are for panels ft. 2 ft., cut to the inch. Description SNLK-[color code]-26 0 Year Painted Galvalume, 26 Gauge Architectural concealed fastener standing seam panel. inch seam height. Hemmed snap lock design. Minimum Slope is 2:2. 2 in. Coverage Typical Applications: Architectural, Residential, Light Commercial/Industrial, Post-Frame Buildings, Garages, Porches, Gazebos. Retrofit over existing roof. AVAILABLE COLORS ENERGY STAR QUALIFIED CW: Cotton White BZ: Bronze BE: Raffia Beige CL: Clay DG: Dove Gray AI: Antique Ivory BDW: Brandywine Colors samples are printers' representations. For more precise color matching request a metal color sample. TC: Terra Cotta FG: Forest Green BL: Blue CG: Charcoal Gray FLASHING & TRIM 2 4 6 8 Construction Metals Inc. 002 Birtcher Dr., Jurupa Valley, CA 92 800-6-980 Fax: 909-90-98 constructionmetals.com

Snap Lock FLASHING & TRIM PRICING Model Description PV- Preformed Valley CL-2 Cleat 2 RC-8 Ridge Cap 2 JC- J-Channel EF- Eave Flashing EF- Gable Flashing 4 EF- Eave Flashing 4 CL- Cleat TF- Transition Flashing 6 GF- Gambrel Flashing EW- Endwall Flashing CF- Counter Flashing 8 SSW- Sidewall Flashing 8 SW- Sidewall Flashing ZC- HS-2 Z Closure High Side Eave (for single slope roof) * Z-Closure is used at locations:,, 4, 6,, 8 Lineal Trims and Flashings are sold in 0 foot lengths unless otherwise specified. See pages & 8 for detailed drawings of Flashing & Trim. See page 6 for fasteners, closure strips and accessories pricing. Construction Metals Inc. 002 Birtcher Dr., Jurupa Valley, CA 92 800-6-980 Fax: 909-90-98 constructionmetals.com 4

Fasteners, Closure Strips & Accessories Pricing Model Description SCWG #0- in. Woodfast Screw, Galvanized - 20/bag SCW** #0- in. Woodfast Screw, Painted - 20/bag #2 x in. Metalfast Screw #0 x. in. Woodfast Screw #0 x 2. in. Woodfast Screw SCWG. SCWG2. SCW**. SCW**2. #0-. in. Woodfast Screw, Galvanized - 20/bag #0-2. in. Woodfast Screw, Galvanized - 20/bag #0-. in. Woodfast Screw, Painted - 20/bag #0-2. in. Woodfast Screw, Painted - 20/bag SCMG #2- in. Metalfast Screw, Galvanized - 20/bag in. SCM** #2- in. Metalfast Screw, Painted - 20/bag #2-4 ZAC Screw Metal-to-Metal Application #0-2 x in. Pancake Head SCTKG SCTK** #2-4 Zac Screw, Galvalume - 20/bag #2-4 Zac Screw, Painted - 20/bag SCPKG #0-2 Pancake Head, Galvanized - 20/bag 2. in. Corrugated Closure Strip SM-Rib Inside Closure Strip (Eave) SM-Rib Outside Closure Strip (Ridge) Universal Closure Strip CLS24 PCCLSIN PCCLS CLSIN-EA CLSOUT-EA CLSUNIVROLL 2 /2 in. Corrugated Foam Closure Strip SM-Rib Foam Inside Closure Strip SM-Rib Foam Outside Closure Strip Foam Inside Closure Strip Foam Outside Closure Strip Universal Foam Closure in. x /2 in. x 2 ft. SM-Rib Transluscent Panel SM-CLEAR-8 -CLEAR-8 SM-Rib Clear Sunsky Panel 8 ft. (8 oz.) Clear Sunsky Panel 8 ft. (8 oz.) Transluscent Panel PB- PB- Pipe Flash /4 in. to 4 in. Pipe Flash 4 in. to in. Pipe Flash BT-4 TP[color] UV- UV-2 UVC- Butyl Sealant Tape /2 in. x /2 in. x 4 ft. Touch-Up Paint - Pint in. Uni-Vent - 20 ft. /4 in. Uni-Vent - 2 ft. in. Uni-Vent Clip Butyl Tape Touch Up Paint Construction Metals Inc. 002 Birtcher Dr., Jurupa Valley, CA 92 800-6-980 Fax: 909-90-98 constructionmetals.com

Metal Roofing Profiles Corrugated 2 /4 in. Overall (24 in. Siding Coverage: 2 /2 Roofing Coverage) 2 2/ in. /2 in. SM Rib 6 in. Coverage 9 in. /8 in. 2 /4 in. /8 in. /4 in. 6 in. Coverage.4 in. /6 in. 2 in. Pitch /8 in. /6 in. 2.06 in. /8 in. 4 9/6 in. 2 in. Coverage 4 in. 4 in. 4 in. in. /4 in. /4 in. Depth: /2 in. Construction Metals Inc. 002 Birtcher Dr., Jurupa Valley, CA 92 800-6-980 Fax: 909-90-98 constructionmetals.com 6

Fastener Placement Corrugated 2 /2 in. Coverage Sidelap Detail for Roofing 24 in. Coverage Sidelap Detail for Siding For all intermediate purlins or plywood. Minimum Pitch /2 Nominal Coverage (± /8 in.) For eaves, ridges and valleys. SM Rib Anti-Siphon Channel Prevailing Wind For all intermediate purlins or plywood. For eaves, ridges and endlaps. Minimum Pitch /2 Nominal Coverage: 6 in. (± /8 in.) For all intermediate locations. Sealant (roofing applications between /2 and /2) Prevailing Wind For eaves, valleys and endlaps. Minimum Pitch /2 Nominal Coverage: 6 in. (± /8 in.) Construction Metals Inc. 002 Birtcher Dr., Jurupa Valley, CA 92 800-6-980 Fax: 909-90-98 constructionmetals.com

Helpful Hints CAUTION: Gibraltar Metal Roofing Panels have sharp edges. Always wear protective clothing and gloves. Do not store metal roofing in an area where moisture can accumulate. Bundled metal roofing must be covered with a breatheable tarp (do not use plastic) and stored on a slant to permit drainage. Metal roofing must be stored properly in transit or on the job site. To avoid rust stains, remove metal shavings/particles after drilling. Failure to comply with these storage procedures relieves the manufacturer of responsibility for any resultant damage to, or deterioration of, the product and voids all warranties. There is no implied warranty of merchantability or fitness for purpose. Calculating Lineal Footage Multiply the length of the pieces by the number Example: 0 pieces of 0 foot lengths: 0 x 0 = 00 L.F. (Lineal Feet) 0 pieces of 0 ft. 2 in. lengths: 0 x 0.6 = 0.6 L.F. (Lineal Feet) Inches to Decimal Fraction of a Foot in. 2 in. in. 4 in. in. 6 in. in. 8 in. 9 in. 0 in. in. 2 in..08.6.20..4.00.8.6.0.8.9.000 Calculating Squares Multiply the Lineal Footage by the panel conversion factor. Corrugated.02 Example: 00 L.F. x.02 = 2 Squares SM-Rib.0 Example: 00 L.F. x.0 = Squares.0 Example: 00 L.F. x.0 = Squares SemLok.0 Example: 00 L.F. x.0 =. Squares Estimating Fasteners Squares x 00, round up to nearest bag count Squares x 00 Squares x 00 Squares x 00 Squares x 2 Fastening schedules change per region. Please check your local building codes. Calculating Pitch & Material Requirements Pitch Angle Multiply by Run to get Length LF of Hips or Valleys per LF of Common Run RISE RUN Construction Metals Inc. 002 Birtcher Dr., Jurupa Valley, CA 92 800-6-980 Fax: 909-90-98 constructionmetals.com 8

ATTENTION Metal Roof Panel Handling & Storage Critical Warranty Information* Store off the ground, inside in a well ventilated, dry location. Block the pallet on an angle to permit drainage. For temporary outside storage, block pallet on a angle to permit drainage and cover with a breatheable tarp (do not use plastic). CAUTION! Sharp edges! Use gloves to prevent injury. This product is not recommended for direct contact with treated lumber. Remove metal shavings after drilling or cutting, to avoid rust stains. Cuts to panels or trims should be done with scissor cutting tools. Do not use a panel saw for cuts. Contact between metal panels and any corrosive materials or dissimilar metals should be prevented. Do not write (with pencil, pen, marker, crayon, etc.) directly onto Metal Roofing Panels or Trims. Failure to comply with these storage procedures relieves the manufacturer of responsibility for any resultant damage to, or deterioration of, the product and voids all warranties. There is no implied warranty of merchantability or fitness for purpose. GIBRALTAR BUILDING PRODUCTS Construction Metals Inc. 002 Birtcher Dr., Jurupa Valley, CA 92 800-6-980 Fax: 909-90-98 constructionmetals.com 9