Architectural Roofing & Wall Systems

Architectural Roofing & Wall Systems

Welcome to MetFab MetFab is a leading architectural metal fabrication expert. Our talented craftsmen produce a wide variety of factory formed and field fabricated profiles that provide architects, designers, and engineers new and better ways to bridge old problems with roofing, siding, and architectural detailing. MetFab roofing systems, wall panel systems, cornices and column covers are all designed with innovative locking systems that make field fabrication and installation easier than ever. Although, it s our manufactured to order capabilities that make MetFab one of the most unique manufacturers in the industry, MetFab prides itself on the ability to create, match, and/or design systems to meet the building owner s specific demands. Our color palette includes both old favorites and new ones, appealing to a wider, more diverse segment of the architectural/design community for both the commercial and residential markets. Our MetFab color finishes are among the best and most durable resin formulas on the market today, with superior resistance to chalking, erosion, and industrial pollutants. These paint systems are produced with reflective pigments to reduce cooling costs and heat island affect. In addition, property owners and designers should be pleased to know that many of our products are sourced locally, utilize environmentally sustainable qualities, and are recyclable. MetFab is, and continues to be, a company that values its artisan skills and working one on one with architects to meet the most exacting demands of modern structures and the specific requirements of historical restorations. MetFab is, and continues to be, a company that values its artisan skills and working one on one with architects to meet the most exacting demands of modern structures and the specific requirements of historical restorations. Profiles include: MetFab Historic, MetFab III, MetFab Aluminum Plate Wall Panels, and MetFab Custom Made Flat-Lock Wall Panels. 2

Panel Overview MetFab offers a wide variety of standing seam metal roof systems. Each designed specifically for various types of architectural metal roofing projects. MetFab Historic This panel features the time-tested tradition of double lock standing seams. This seam method has proven successful for over 100 years. PAGE 4 MetFab III A commercial product that is structural and pleasing to the eye. This panel can be installed in low slope applications and rounds out our line of mechanically seamed panels. PAGE 5 MetFab Curved We curve roofing panels. Whether concave or convex, MetFab can curve metal roofing panels to your desired radius. PAGE 6 MetFab Snap-On 400 A low profile and clipless design makes this panel extremely fast to install. This product is ideal for residential and commercial applications. PAGE 7 MetFab Snap-On 550 Snap! Pop! It s on. The 1.5" Snap-On is quick and easy. This panel provides a highly water-resistant seam, along with a lower profile for a look that is unobtrusive. PAGE 8 MetFab Snap-On 675 It s a snap, and it s structural. With the visual appeal of broad width seams and the practical appeal of easy, fast installation, this product is the way of the future. PAGE 9 MetFab Cap Seam Slim seams and flat pans make this product an ease to install with minimal waste. Perfect for curved roofs, mansards, and other steep-slope installations. PAGE 10 Additional Products PAGES 13-21 MetFab Snap-On Batten The long-time favorite for the traditional bold look. Wide battens bring the visual appeal of the past together with the ease of today s modern metal roofing construction. PAGE 11 MetFab Flush The flush, flat look with quick-to-install interlocking seams. The seamless look you desire for walls, soffits, and equipment screens is accomplished with this product. PAGE 12 Bermuda Horizon Horizontal installation and minimal depth provide a quaint Bermuda style for use as a roof or wall panel. PAGE 13 S-5! ColorGard Snow Retention Cornice & Custom Fabrication Custom Trim & Accessories Column Covers Plate Wall & Soffit Panels Coping Systems Specialty Metals Fascia & Gravel Stops Sheet & Slit Coil MetShield High Temperature Waterproof Underlayment Membrane 3

MetFab Historic Traditional double lock standing seams. This product is based upon the time-tested standing seam panels used successfully for over 100 years. MetFab manufactures this product in continuous lengths to achieve the ultimate in watertight panel integrity. All seams are mechanically closed on-site to ensure permanent weather-tightness. A finished seam of 1" or 1.5" with variable width panels will provide the flexibility desired. Like all MetFab products, the MetFab Historic Panel will feature a Kynar 500 or Hylar 5000 finish, which carries a 35-year finish warranty. The MetFab Historic panel should be installed over a solid substrate with MetFab underlayment. Meets ASTM E331 84 water penetration test with no evidence of uncontrolled leakage at 20 psf pressure differential. Seam height: 1" or 1.5" Standard widths: 12", 14", 16", 18" or 20" All seams mechanically closed, single or double lock Concealed sliding or fixed clips Factory or field rolled to exact lengths Stiffener ribs optional Striation ribs optional Materials: 24ga galvanized Kynar 500 24ga Galvalume Kynar 500.032 aluminum Kynar 500 24ga Galvalume Plus 16 oz copper 16 oz lead coated copper s Manufactured in continuous lengths to achieve the ultimate watertight panel integrity. 4

MetFab III The MetFab III is our latest commercial solution for low slope applications. Whether it is a reroof or new construction, this product will fill your needs. This 2" mechanically seamed panel is time tested and has a proven design. MetFab III can be factory manufactured and shipped to the job, or site formed for continuous length panels. MetFab recommends that all end laps be eliminated by running full length panels from eave to ridge. The full length-mechanically seamed panel will ensure a weathertight installation. MetFab III is UL tested under the strict requirements of the UL 580 test and carries a UL 580 class 90 rating for open framing at 5' spacing. This panel can be installed down to a 3/12 slope without sealant, or down to a 0.5/12 with sealant in the seam. The MetFab III will prove to be the most competitive and practical panel for metal building re-roof, and low slope applications. Seam height: 2" Standard widths: 12", 14", 16" or 18" All seams mechanically closed, single or double lock Optional inseam sealant Factory or field rolled to exact lengths ASTM E1592 tested for uplift pressure ASTM E1646 tested for water penetration ASTM E1680 tested for air leakage Stiffener ribs optional Striation ribs optional Materials: 24ga and 22ga galvanized Kynar 500 24ga and 22ga Galvalume Kynar 500.032 and.040 aluminum Kynar 500 24ga Galvalume Plus 16 oz and 20 oz copper / 16 oz lead coated copper s Panels can be factory manufactured and shipped to the job, or site-run for continuous length. NOTE: Panels can be single folded as shown or double folded. Uniform Live Loads / 3 Span Condition PANEL PANEL 2' SPAN 3' SPAN 4' SPAN 5' SPAN WIDTH GAUGE LL/psf-WL/psf LL/psf-WL/psf LL/psf-WL/psf LL/psf-WL/psf 16" 24 315 419 143 190 81 108 52 69 18" 24 280 372 127 169 72 96 46 61 90 seam rotation LL is allowable live load WL is allowable live load increased by 33.3% NOTE: drawings shown for optional 45 and 90 tested for 180. 5

MetFab Curved MetFab produces three panels that can be radiused to almost every curve. From barrel roofs, domes to conical shapes, MetFab is the premier manufacturer of custom panels. MetFab Curved panels should be installed over a solid substrate with a full layer of MetShield high temperature ice and water protection. Panels should be full length with no end laps. For panels longer than 30', MetFab site fabrication should be considered. MetShield ice and water barrier underlayment is required under all curved installations. Seam height: 1", 1.5", or 2" Standard widths*: 12", 14", 16", 18", 19" or 20" Double lock or cap seam Curving to 3' radius* Curved, tapered, or domed Factory or field rolled to exact lengths Materials: 24ga galvanized Kynar 500 24ga Galvalume Kynar 500.032 aluminum Kynar 500 24ga Galvalume Plus 16 oz copper 16 oz lead coated copper *Available widths and radius vary depending upon profile. Please inquire. s MetFab s curved panels offer a customized, attractive option for architects looking for a unique roofing design. 1" MetFab CapSeam Curved 2" MetFab Historic Curved MetFab III CUrved 6

MetFab Snap-On 400 Our latest panel featuring a sleek 7/8 profile and designed for clipless installation. MetFab produces this product for the low profile look and fast installation. The panel can be installed using a screw gun or power nailer. The slotted fastening points are reinforced to resist pullover. This panel is ideal for slopes of 3/12 or greater. Seam height: 7/8" Standard widths: 12", 14", 16", 18" or 20" Fast installation No clips required Stiffener ribs optional Striation ribs optional Materials: 24ga galvanized Kynar 500 24ga Galvalume Kynar 500.032 aluminum Kynar 500 24ga Galvalume Plus s Snap-On 400 clipless design is produced for the low profile look and fast installation. Uniform Live Loads / 3 Span Condition PANEL PANEL 2' SPAN 3' 6" SPAN 3' SPAN 3' 6" SPAN WIDTH GAUGE LL/psf-WL/psf LL/psf-WL/psf LL/psf-WL/psf LL/psf-WL/psf 12" 24 89? 139 57 89 39 62 29 45 14" 24 76 120 49 77 34 53 25 39 16" 24 67 106 43 68 30 47 22 34 18" 24 60 95 38 60 26 42 19 31 16" 26 72 122 46 78 32 54 23 40 16" 29 53 92 34 59 23 41 17 30 20" 24 54 85 34 54 24 31 17 28 LL is allowable live load WL is allowable live load increased by 33.3% 7

MetFab Snap-On 550 A snap-on panel provides good water resistance with quick installation. MetFab manufactures the Snap-On 550, with its unique locking seam, to provide one of the best integral seam designs on the market today. This panel is also one of the quickest to install, and can provide a weathertight seam without the use of sealants. The Snap-On 550 can be installed on slopes as low as 3/12. This product has been tested by Underwriters Laboratory and has a UL 580 class 90 rating over open framing. The Snap-On 550, when tested under the ASTM E331 84 water penetration test, showed no water leakage at 20 psf. The ASTM E283 air infiltration leakage test was conducted at 20 psf and showed a total air flow of 0.014 cfm per lin ft of seam. Seam height: 1.5" Standard widths: 12", 14", 16", 18", 19" Quick snap-on seaming Factory or site fabrication Meets UL 90 requirements Stiffener ribs optional Striation ribs optional Materials: 24ga and 22ga galvanized Kynar 500 24ga and 22ga Galvalume Kynar 500.032 and.040 aluminum Kynar 500 24ga Galvalume Plus s Unique locking seam provides one of the best integral seam designs on the market today. 11/2" Uniform Live Loads / 3 Span Condition PANEL PANEL 2' SPAN 3' SPAN 4' SPAN 5' SPAN WIDTH GAUGE LL/psf-WL/psf LL/psf-WL/psf LL/psf-WL/psf LL/psf-WL/psf 14" 24 199? 265 88 117 49 65 31 41 16" 24 174 231 77 102 43 57 27 36 18" 24 155 206 69 92 38 51 24 32 19" 24 147 196 65 86 36 48 23 31 LL is allowable live load WL is allowable live load increased by 33.3% 8

MetFab Snap-On 675 This product snaps on with ease and is structural. The MetFab Snap-On 675 has aesthetic value with full design capabilities. With a seam height of 1.75", the MetFab Snap-On 675 is engineered to perform. Installation is fast and easy. MetFab produces the Snap-On 675 for architects who prefer the broad width seam, but need the structural capabilities of an engineered system. The fully integrated seam with fixed clips allows thermal movement and requires no mechanical seaming to ensure weathertight integrity. This product can be produced on-site to exact dimensions, and will allow for an end lap-free installation. The Snap-On 675 can be installed where the slope is as low as 3/12. MetFab Snap-On 675 meets the requirements for UL 580 class 90 rating over open framing. ASTM E331 84 water penetration test showed no evidence of uncontrolled leakage at 6.24 psf.* ASTM E330 84: The 1.75" Snap-On meets the criteria in accordance with pleated air bag testing (modified ASTM E330). * Seam sealant required. Seam height: 1.75" Standard widths: 12", 14", 16" 18" Quick snap-on seaming Factory or site fabricated to exact lengths Meets UL requirements 2218 and 790 UL 580 Class 90 certified TAS 125 and 100 tested ASTM E1680 tested for air leakage ASTM E1886 tested for impact Stiffener ribs optional Striation ribs optional Materials: 24ga and 22ga galvanized Kynar 500 24ga and 22ga Galvalume Kynar 500.032 and.040 aluminum Kynar 500 24ga Galvalume Plus s For architects who prefer the broad width seam, but need the structural capabilities of an engineered system. Uniform Live Loads / 3 Span Condition PANEL PANEL 2' SPAN 3' SPAN 4' SPAN 5'" SPAN WIDTH GAUGE LL/psf-WL/psf LL/psf-WL/psf LL/psf-WL/psf LL/psf-WL/psf 12" 24 269? 413 120 183 67 103 43 66 22 358 576 159 256 89 144 57 92 16" 24 202 303 90 135 51 76 32 48 22 269 439 119 195 67 110 43 70 18" 24 180 267 80 119 45 67 29 43 22 239 391 106 174 60 98 38 62 LL is allowable live load WL is allowable live load increased by 33.3% 9

MetFab Cap Seam The pleasing look of a slim seam with the ease of a flat panel. The 1" seams are ideal for your curved applications. MetFab produces this product for the low profile look. The 1" cap combined with the flat pan make it very easy and quick when detailing at hips and valleys. This product is ideal for curving and can be curved as tight as a 3' radius. This product must be installed over solid substrate with MetFab underlayment, with a minimum 3/12 slope. MetShield ice and water barrier underlayment is required under all curved installations. Seam height: 1" or 1.5" Standard widths: 12", 14", 16", 18", 19" Easy installation Curving to 3' radius UL 580 class 90 over solid substrate Stiffener ribs optional Striation ribs optional Materials: 24ga galvanized Kynar 500 24ga Galvalume Kynar 500.032 aluminum Kynar 500 24ga Galvalume Plus 16 oz copper 16 oz lead coated copper s Produced for the low profile look. Very easy and quick when detailing hips and valleys. 10

MetFab Snap-On Batten The traditional bold look of a 1.5" batten with the ease of a quick snap. MetFab manufactures the batten system for the architect who desires the wide batten look. This product is architectural and is ideal for mansards, fascias, or any solid substrate with a slope that exceeds 3/12. This product must be installed over solid substrate with MetFab underlayment. Seams: 1.5" x 1.5" Standard widths: 12", 16", 18" Quick snap-on battens Easy roof-to-fascia transition Materials: 24ga galvanized Kynar 500 24ga Galvalume Kynar 500.032 aluminum Kynar 500 24ga Galvalume Plus s A batten system for the architect who desires the wide batten look. Ideal for mansards and fascias. 11

MetFab Flush The most versatile wall and soffit panel on the market. This product produces the often desired flush look. The MetFab Flush Panel can be utilized as fascias, walls, equipment screens, and soffits. MetFab engineered this product to produce a concealed male and female connection, that allows a smooth uninterrupted appearance. A stiffener bead can be used to enhance the look. To produce the smoothest panel possible, MetFab tension levels all of its metal. Wall panels can be manufactured in 24 and 22 gauge steel, or.032" and.040" aluminum. Panel depth: 1" Standard panel width: 12" Easy to install male and female connections Open frame installation Optional perforation (24ga and.032 only) DMC FW1 ASTM E1592 tested for uplift pressure ASTM E283 tested for air leaking ASTM E331 tested for water penetration Materials: 24ga and 22ga galvanized Kynar 500 24ga and 22ga Galvalume Kynar 500.032 and.040 aluminum Kynar 500 24ga Galvalume Plus s Engineered to produce a concealed make and female connection that allows a smooth uninterrupted appearance. 12

Bermuda Horizon Its clean, horizontal, and easy to install. MetFab Bermuda Horizon panel is an interlocking horizontal metal roof and wall panel. This panel can be utilized in residential and commercial applications. With a 12" exposure and a 1" or 1.5" vertical shadow line, this panel will produce the quaint look of Bermuda architecture and the subtle aesthetic appeal of a horizontal line. MetFab Bermuda Horizon can be installed over solid substrate or vertical framing. Use of this panel over vertical framing would eliminate the need for additional hat channel framing. This product can be manufactured in full lengths, eliminating interruptions and hidden splices. The Bermuda Horizon panel with its shingle lapped interlocking seams can provide superior water-resistance on walls or roof applications with a slope as low as 4/12. The use of MetFab underlayment is required. Seam height: 1" or 1.5" Standard 12" width Quick shingle interlapping seams Factory or site fabrication Optional in seam sealant Materials: 24ga and 22ga galvanized Kynar 500 24ga and 22ga Galvalume Kynar 500.032 and.040 aluminum Kynar 500 24ga Galvalume Plus 16 oz and 20oz copper 16 oz lead coated copper s This panel produces the quaint look of Bermuda architecture and the subtle aesthetic appeal of a horizontal line. S-5! ColorGard Snow Retention Snow Retention System offers perfect color match with unsurpassed holding strength! The only snow retention system with an available Limited Lifetime warranted system. Designed and engineered on a site-specific basis, ColorGard's unsurpassed holding strength controls snow migration with a perfect color match that lasts the life of the roof plus the same penetration-free easy installation of all S-5! products. ColorGard has greater holding strength, better aesthetics, longer service life, and lower installation cost than any other engineered system FRONT on the market! BACK 13

Cornice and Custom Fabrication At MetFab we can reproduce traditional cornice designs with accuracy. Our full line of radius tooling allows us to accurately reproduce existing shapes and consistently match piece after piece. Prefabricated dentils and corners will allow for easy installation. Historic reproductions with modern Kynar finishes will last a lifetime. Customized shapes for architectural appeal will allow the designer to express their artistic desires. Contemporary shapes and designs are unlimited. Call MetFab for capabilities and design restrictions. Materials: Aluminum:.032,.040,.050,.063,.080,.090,.125 Copper: 16, 20, 24 oz. Lead Coated Copper: 16 and 20 oz. Stainless Steel: 26, 24, 22, 20 gauge Galvanized Steel: 18, 20, 22, 24 gauge Finishes: Kynar 500, Anodized, Powder Coated Pre-attached dentils and finals 14

Custom Trim & Accessories MetFab can handle all of your sheet metal requirements. Our products are manufactured with computer-operated equipment to provide the most accurate and consistent components that are available. Full range of gutters box, ogee and half round Downspouts box and round Conductor Heads Cornices and fascias In-wall reglet Vented ridge caps C, Z and hat channels Custom shapes Materials: Aluminum.032,.040,.050,.063,.080 Copper 16, 20, 24 oz. Lead Coated Copper: 16 or 20 oz. Stainless Steel: 28, 26, 24, 22, 20 gauge Finishes: Kynar 500, Anodized, Powder Coated 15

Column Covers MetFab Column Covers are designed for the concealment of structural columns and for use as an architectural accent. MetFab Column Covers are durable and easy to install. MetFab Column Covers are available in a wide range of sizes and have many options and finishes to make your project unique. 1/8" aluminum construction for durability Minimum 6" radius 12' max length can be stacked for added heights Horizontal reveals available Top, Middle, Bottom Finishes: Mill Finish Anodized Clear and Bronze Kynar 500 Powder Coated 16

Plate Wall & Soffit Panels This plate and wall panel system is installed using a unique track and compression channel which allows them to be installed in virtually any order. This system allows panels to be removed individually, making future access or replacement of panels easier. Joints are caulked. Aluminum:.080,.090,.125 Individually removable panels With or without caulk joint Finishes: Mill Finish Kynar 500 Anodized Clear and Bronze Powder Coated 17

Coping Systems These products are manufactured to exact job conditions and are designed for quick installation. Spring-Tite Copings are provided in high quality, heavy gauge materials without the need for exposed fasteners. Spring-Tite Copings have been engineered with a fully supporting anchor chair that will meet the strictest of standards. The anchor chair is manufactured in continuous lengths which takes the guesswork out of cleat spacing. This unique design allows for quick and easy installation with a supporting anchor chair that eliminates sag, and supports the coping, insuring a firm and true installation. These copings are engineered to provide the highest resistance to wind and eliminate roof edge blow off. MetFab s standard coping is also available with a continuous hold down cleat and can be provided in lighter gauges. Coping widths of 4" to 20" Face dimensions of 3" to 10" Radius Welded aluminum corners 24 and 22 gauge galvanized steel 24 and 22 gauge Galvalume Aluminum:.032,.040,.050,.063,.080,.090,.125 Standard and custom colors available Stainless Steel: 26, 24, 22, and 20 gauge Specialty Metals Terne coated stainless steel, copper, zinc and other specialty metals, MetFab offers architects and designers a wide selection of metals designed to enhance and accent today s architecture. Manufactured to MetFab s quality standards for form and functionality, special metals can be fabricated into a wide variety of panels and shapes to make a distinct difference in aesthetic appeal. 18

Fascia & Gravel Stops MetFab produces a full line of edge terminations. These products can be installed on most roof systems. If it is single ply, modified bitumen, or BUR we have the product for your project. These products are quick to install and provide the highest quality of any pre-manufactured product. MetFab fascias and gravel stops are designed to perform. Wind up lift resistance Weather proof Membrane securement Unrestricted expansion Various fascia and dam sizes 24 gauge spring dam Under-splice joints 24 and 22 gauge galvanized steel 24 and 22 gauge Galvalume Aluminum:.040,.050,.063,.080 Welded corners Kynar 500 finishes Standard and custom colors Stainless Steel: 28, 26, 24, 22, 20, and 18 gauge 19

Sheet and Slit Coil MetFab produces top quality flat sheet and coil material. With our cut-to-length and recoil system, we can quickly and accurately fill your orders. We stock coil for your site formed panels, and flat material for all your trim and fabrication needs. Technical Data High Performance Metal Roofing Finishes For Galvalume, Aluminum Coils and Sheets Substrates High performance metal roofing products are available in Galvalume and Aluminum. All metal products are tension leveled for superior flatness. See page 22 for paint finishes and warranty information. Available colors include: Standard Colors Stone White Bone White Regal White Sandstone Colonial Red Aged Copper Burgundy Pacific Blue Slate Blue Teal Blue Patina Green Evergreen Moss Forest Green Island Blue Premium Colors* Bright Silver Pre-Weathered Galvalume Champagne Mill Finish Drexlume Hartford Green Charcoal Gray Dove Gray Dark Bronze Surrey Beige Sierra Tan Medium Bronze Mansard Brown Matte Black Terra Cotta Deep Blue Sea Hemlock Slate Gray Buckskin Metallic Copper Antique Patina Brilliance Red * Denotes premium colors, check for pricing. These colors represent MetFab's standard colors for 24 gauge galvanized steel. For any other requirements, please contact us. Weathering Coated Steel or Aluminum ASTM D 822 Hours: 3000 ASTM G 151 No checking ASTM G 153 No blistering No loss of adhesion Florida Exposure ASTM D 2244 ASTM D 4214 Salt Spray ASTM B 117 Coated Steel or Aluminum Hours: 5 years Color Change: 5sE Chalk Rating: 8 Hours: 1000 - coated Steel Hours: 3000 - Aluminum No blistering Humidity Hours: 1500 ASTM D 2247 No blistering, cracking, or peeling Formability 1T* ASTM D 4145 No Loss of Adhesion Pencil Hardness ASTM D 3363 Specular Gloss ASTM D 523 Cross Hatch Adhesion ASTM D 3359 Abrasion Resistance ASTM D 968 Flame Test ASTM E 84 HB minimum 25-40 at 60 insert deg symbol 4 B rating, minimum 60 +/- 5 liters/mil of falling sand Class A coating * Fluropolymer finishes are not designed to bridge cracks in the substrate. Slight micro-cracking of the finish is possible on a 1T bend. Custom colors are available. 20

MetShield Underlayment High Temperature Waterproof Underlayment Membrane MetShield Water and Ice protection is a sheet membrane underlayment specifically designed for high temperature application typically found under metal roof installation. MetShield is a 40 mil SBS modified bitumen with a UV resistant anti-slip polyethylene woven top facer, which will prevent water penetration from wind driven rain and water back up caused by ice or debris back up. Met- Shield is used specifically as a metal roof underlayment and is required under all warranted systems. Features and Benefits: High Temperature Formulation: MetShield will resist temperatures up to 250 F without degradation of the adhesive. Moisture and Air Barrier: MetShield protects the roof structure from water seepage caused by ice dams and wind driven rains. Self Sealing: MetShield membranes seal around roofing nails, screws and clips used to install the primary roofing system. Dual Barrier Protection: Dual Barrier Protection MetShield provides maximum water-proofing protection. The composite membrane consists of a SBS modified bitumen with a UV resistant anti-slip polyethylene woven top facer. Technical Data Performance Properties test Method typical Values Tensile Strength ASTM D 412 550 psi Permeance ASTM E 96 0.01 perms Low Temperature Flexibility ASTM D 1970 no cracking or delamination Peel Adhesion ASTM D 903 4 lbs./inch width Physical Properties Surface: White Film Thickness: Min. 40 mils Roll Size: 3' x 66.7' (0.91m x 20.4m) (177 sq. ft. coverage) Shipping Weight: 39 lbs. Rolls per pallet: 36 MetShield Prevents: Roof Damage from melting ice Roof damage from wind driven rain MetShield is ideal for: New construction Re-Roofing All metal roofing applications Roof edges, valleys, ridges and all critical areas MetShield is the ultimate water damage protection: Self-adhesive Uniform thickness Easy to install Skid resistant during application Withstands structural movement Self-sealing Permanent membrane Resists high temperatures found under metal roofing (220 F) 21

Metal, Finishes and Considerations Finishes. The resin system in MetFab high performance finish Fluropon is made up of 70% Kynar 500 or Hylar 5000 resin. The carbon/fluorine bond, which gives Kynar 500 or Hylar 5000 resin based coatings their stubborn resistance to chalking and erosion as well as their resistance to harsh airborne industrial and atmospheric pollutants, is one of the strongest chemical bonds known to man. The standard coating thickness of 1.0 mil will provide a lifetime of service. Additional coatings can be applied to meet ASTM specification D 968, for falling sand of 100 or 230 liters. If desired, metallic, custom colors, high gloss, low gloss and Duranar XL systems can be produced. Contact manufacturer for pricing. MetFab paint finishes include: Trinar (Fluoropolymer) MetFab Metals standard colors are produced by Akzo Nobel and contain a minimum of 70% PVDF base resin with ceramic pigments. All colors are formulated to ensure consistent appearance and quality. The Trinar system is applied over Akzo Nobel polyester primer in a minimum thickness of 0.2 mil and can be applied to either Galvalume HD Galvanized or Aluminum substrates. All topcoats are minimum of 0.8 mil of the Trinar color choice. The reverse side is primer and a washcoat of 0.5 mil total dry film thickness. Drexlume MetFab offers a mil finished Galvalume with a two-sided, clear acrylic finish that simultaneously aids roll forming without the use of lubricants and eliminates unsightly handprints or stains resulting from handling and storage. The acrylic finish dissolves naturally over a period of time, and when left as it is, allows for natural and even weathering. Material. Aluminum is produced to meet ASTM B 209 and is offered in 3105, 3003, or 5005 alloys. Galvanized steel is produced to ASTM standard A 653M and has a yield strength of 37 KSI and a tensile of 52 KSI. Galvalume is produced to meet ASTM A 792. These products are tension leveled to produce the flattest product possible. Oil canning is an inherent trait of thin gauge metals. Stucco embossing may be utilized to help eliminate some of the visual appearance of oil canning. Copper, stainless steel, and terne coated stainless are also available. Please contact manufacturer for more information. Accessories. All MetFab trims, clips, and custom formed products are produced with CNC accuracy. This ensures that the lengths, angles, and dimensions are produced to exact specification. If you choose to fabricate your own trims, a full line of flat sheets are in stock. A flat sheet size of 48" x 120" with vinyl protection is standard. A wide range of clips are stocked to ensure proper attachment for your specific requirements. Field Fabrication. MetFab is one of the few manufacturers capable of providing both factory and field fabrication of its complete line of products. Field fabrication will produce a quality product as good or better than one manufactured in the plant. When panel lengths exceed 50', the chances of damage during shipping and rooftop staging are great. Site fabrication eliminates product damage, shortages, and excess waste. All panels can be cut to exact field conditions and do not require extensive crating. Site fabrication will also allow for precise sizing of rake panels which ensures a watertight condition. Most importantly, site fabrication eliminates all end laps, the number one cause of metal roof leaks. MetFab recommends, where possible, that no end laps occur. With field fabrication, panel lengths up to 200' are possible. Warranty. High performance metal roofing products are available in Galvalume and Aluminum. All metal products are tension leveled for superior flatness. 35 year non pro-rated PVDF paint warranty with a 20-year Galvalume Substrate Warranty 35-year non pro-rated PVDF paint and 25-year Aluminum Substrate Warranty 20-year non pro-rated International PVDF Paint Warranty 25-year non pro-rated Drexlume TM (Acrylic Coated Galvalume ) Warranty Testing and Ratings. Many MetFab products are rated for water and air infiltration. Load spans and UL-90 certifications can be verified by registered engineers. System assemblies and construction details vary and not all assemblies have been tested. Please contact our technical staff to answer your specific questions. Considerations. MetFab Cap Seam and Snap-On Batten panels must be installed with a minimum of 3/12 slope over solid substrate with MetFab underlayment. MetFab Snap-On 675, Snap-On 550, and Snap-On 400 panels are limited to 3/12 slope, but can be installed over open framing. For lower slope applications, the Historic and MetFab III are the choice. Panels longer than 30' need to utilize sliding or non-restricting clips. Contact our technical department for proper clip spacing. The use of MetShield, a self-adhering, rubberized asphalt sheet membrane, will allow for a watertight installation, particularly in low slope and curved applications. MetShield should also be considered where ice and water backup can occur, such as eaves and valleys. When installing MetFab products and accessories, refer to the SMACNA architectural manual to ensure good sheet metal and roofing practices. Oil Canning. MetFab utilizes top quality materials specifically designed for rollforming applications. Oil canning is naturally inherent in sheet metal, appearing as waviness in the flat portions of the sheet. All MetFab products are tension leveled to help minimize excessive oil canning. Oil canning is not grounds for rejection. There are a few ways to help minimize this appearance, such as specifying narrower panels, utilizing stiffener ribs or striations, and/or specifying stucco embossed material. 22

Construction Details Coping Detail Rake Detail Gutter Detail Ridge Detail Roof Transition Detail Vented Ridge Detail Reglet Detail Curved Edge Detail Valley Detail Peak Detail Wall At Window Detail Roof Transition Detail 23

7450 Montevideo Road Jessup, Maryland 20794 www.met-fab.com 800.863.8322 410.799.1414 410.799.9913/Fax Architectural Roofing & Wall Systems MetFab is, and continues to be, a company with vision that spans the present and the future, meeting today s needs while forging a path ahead with new, innovative designs, green initiatives, and products for tomorrow. 2012 MetFab