CORRIGENDUM TO TENDER FOR HIGH PERFORMANCE SERVER Tender Notice No. 3/2014-15 dated 29.12.2014 (IIT/CE/ENQ/COM/HPC/2014-15/569) Tender Submission Deadline Last date for submission of sealed bids is extended to February 17, 2015 by 11:30 AM. Server components No. of nodes 14 nodes 1 master node + 13 compute nodes (11 CPU nodes and 2 GPU nodes) The master, compute nodes are to be connected by NFS over Infiniband. 1 GPU 1 GPU cards each This line is removed specification given bellow. NAS box 1 NAS box This line is removed Specification of Servers The table Specification for each rackmount server (14 no) (no. may change, therefore quote for unit) in the tender is now changed to three separate tables with the following specifications given below. 1. Rack-mount Server Specification (Master Node) 2. Rack-mount Server Specification (CPU Compute Node) 3. Rack-mount Server Specification (GPU Compute Node) The Item names in the new tables refer to the corresponding item names in the single table in the original tender unless otherwise mentioned. The items in the original table that are changed and new items are shown in bold. The items in the original table that are not changed are also mentioned for clarity. Specification of infiniband switch, KVM switch and Rack are not mentioned here as they remain same. They are to be added to each table to complete the full specification of a server. The bidders are requested to quote for unit price of each of the three items master node, CPU compute node and GPU compute node.
Rack-mount Server Specification (Master node) Processor Intel Xeon E5-2600 v2 series, Intel Xeon E5-2600 v3 series, 2.6 2.5 GHz or GHz or I/O Bus Intel QPI 8 GT/s or #Processor per node 2 Core per processor 8 or L3 Cache 20 MB or DIMM slots 12 or Memory 256GB DDR3 1866 MHz ECC RAM 128GB DDR4 2133 MHz ECC RAM. Expandable up to 256GB. Hard Disk 2 x 2TB SATA 7.2Krpm or 1TB + 3TB SATA 7.2Krpm or Optical disk Drive DVD + RW This item is removed I/O Slots At least 4 PCIe slots This item is removed Network Interface Minimum 4 integrated Gigabit Ethernet ports Additional Network 4 x FDR Infiniband 4x FDR Infiniband interface USB ports At least 2 External, 1 Internal At least 2 external USB ports Chassis/Form factor 2U (or less) Rackmount, with all necessary rail kits & cable. Operating system Red Hat Enterprise Linux 6 support Server Management Must provide server management software to remotely manage all servers from a single console. Software must be from the same OEM. Initial Setup The bidder must set up the above HPC system with Red Hat Enterprise Linux 6 DAS (Direct Attached Storage) (new item added in the corrigendum) Warranty 5 years comprehensive onsite warranty Centos 6 or (opensource) ROCKS* (opensource) The bidder must set up the above HPC system with centos along with server management and other software mentioned below 48 TB SATA 10 Krpm or, 6 Gbps speed. The DAS needs to be integrated to the master node, so all necessary accessories should also be supplied and installed.
Rack-mount Server Specification (CPU compute nodes) Processor Intel Xeon E5-2600 v2 series, Intel Xeon E5-2600 v3 series, 2.5 GHz or 2.6 GHz or I/O Bus Intel QPI 8 GT/s or #Processor per node 2 Core per processor 8 or L3 Cache 20 MB or DIMM slots 12 or Memory 256GB DDR3 1866 MHz ECC 128GB DDR4 2133 MHz ECC RAM RAM. Expandable up to 256GB. Hard Disk 2 x 2TB SATA 7.2Krpm or 1TB + 3TB SATA 7.2Krpm or Optical disk Drive DVD + RW This item is removed I/O Slots At least 4 PCIe slots This item is removed Network Interface Minimum 4 integrated Gigabit Ethernet ports Additional Network 4 x FDR Infiniband 4x FDR Infiniband interface USB ports At least 2 External, 1 Internal At least 2 external USB ports Chassis/Form factor 2U (or less) Rackmount, with all necessary rail kits & cable. Operating system Red Hat Enterprise Linux 6 Centos 6 or support (opensource) Server Management Must provide server ROCKS* (opensource) management software to remotely manage all servers from a single console. Software must be from the same OEM. Initial Setup The bidder must set up the The bidder must set up the above HPC system with Red above HPC system with centos Hat Enterprise Linux 6 along with server management and other software mentioned Warranty 5 years comprehensive onsite warranty below
Rack-mount Server Specification (GPU compute node) Processor Intel Xeon E5-2600 v2 series, Intel Xeon E5-2600 v3 series, 2.6 2.5 GHz or GHz or I/O Bus Intel QPI 8 GT/s or #Processor per node 2 Core per processor 8 or L3 Cache 20 MB or DIMM slots 12 or Memory 256GB DDR3 1866 MHz ECC RAM 128GB DDR4 2133 MHz ECC RAM. Expandable up to 256GB. Hard Disk 2 x 2TB SATA 7.2Krpm or 1TB + 3TB SATA 7.2Krpm or Optical disk Drive DVD + RW This item is removed I/O Slots At least 4 PCIe slots This item is removed Network Interface Minimum 4 integrated Gigabit Ethernet ports Additional Network 4 x FDR Infiniband 4x FDR Infiniband interface USB ports At least 2 External, 1 Internal At least 2 external USB ports Chassis/Form factor 2U (or less) Rackmount, with all necessary rail kits & cable. Operating system Red Hat Enterprise Linux 6 support Server Management Must provide server management software to remotely manage all servers from a single console. Software must be from the same OEM. Initial Setup The bidder must set up the above HPC system with Red Hat Enterprise Linux 6 GPU card along with all necessary accessories for integration with the server (new item added in this corrigendum) Warranty Centos 6 or (opensource) ROCKS* (opensource) The bidder must set up the above HPC system with centos along with server management and other software mentioned below Nvidia TESLA K40 Nvidia TESLA K40 (server version) with 5 year comprehensive onsite warranty 5 years comprehensive onsite warranty
New Clause added in this corrigendum * OS, server management and other software will be provided by the department. Bidder must install all software as mentioned in the following list. ABAQUS, Matlab, OpenMP, MPICH, Intel parallel studio, Lammps, OpenACC, Cuda, Paraview. New terms and conditions added in this corrigendum Other Terms and Conditions 1. Any service request must be attended to within the next business day. Both the vendor and the OEM must have sales and support service centers in India for the last 10 years and have support Location in Kolkata. The bidder should provide details of support service centre of both the bidder and the OEM with a write up on service and maintenance capability, breakdown and replacement capability, and the escalation support matrix suggested for the Institute. 2. The warranty provided by the bidder should have a back to back arrangement with the OEM. The declaration should be the part of a Letter of Authorization and signed by competent authority at the OEM. The specifications for GPU card (1 no) and NAS box (1 no) in the original tender is removed in this corrigendum General Terms and Conditions Sl. No. 1 Last Date of Submission of Sealed Bids : February 03, 2015 - upto 11.30 am. am. Sl. No. 21 New Item Name and address of past satisfactory supplies by the bidder to minimum three reputed organizations in India in the past five years to whom such items/stores of similar or volume have been supplied should be mentioned in the technical bid along with documentary evidence (Client certificate//po copy) Last Date of Submission of Sealed Bids: February 17, 2015 - upto 11.30 Name and address of past satisfactory supplies by the bidder to minimum three reputed academic organizations in India in the past five years to whom such installation of at least 10TF have been made should be mentioned in the technical bid along with documentary evidence (Client certificate//po copy) The warranty provided by the bidder should have a back to back arrangement with the OEM. The declaration should be the part of a Letter of Authorization and signed by competent authority at the OEM.