How To Configure Your Computer With A Microsoft X86 V3.2 (X86) And X86 (Xo) (Xos) (Powerbook) (For Microsoft) (Microsoft) And Zilog (X

Transcription

1 System Configuration and Order-information Guide RX00 S4 February 008

2 Front View CD-ROM Drive (Optional) Hard Disk Bay Back View PCI Slot 0/00/000BASE-T connector Serial Port Display Mouse Keyboard Inside View PCI Slot DIMM Slot CPU System Fan

3 Instruction This document contains basic product and configuration information that will enable you to configure your system. Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system. You can configure your individual PRIMERGY server in order to meet your specific requirements. Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through the configurator by following the lines from the top to the bottom. The color of the junction means as follows. Key to Or And

4 Data Sheet Type Mono-Processor Rack Server Base Unit Xeon 3040 (.86GHz) PGUR044A CPU Frequencies Second-Level-Cache Dual-Core Intel Xeon 3070 (.66GHz) *5 / 3040 (.86GHz) 4MB ( Dual-Core Intel Xeon 3070 (.66GHz) ) / MB ( Dual-Core Intel Xeon 3040 (.86GHz) ) Front-Side-Bus Chipset 066MHz ( Dual-Core Intel Xeon 3070 (.66GHz) / 3040 (.86GHz) ) Intel 3000 Memory Standard 5MB (5MB ECC DDR SDRAM DIMM x ) Maximum * 8GB (GB ECC DDR SDRAM DIMM x 4) Graphics Controller incl. Remote Management Controller, VRAM :.7MB Resolution * 640x480 dot colors 800x600 dot colors 04x768 dot colors 80x04 dot 56 colors Internal Bays Number of bays (hot plug) 3.5 inch Available HDD *3 73.4GB (PG-HDB75A) 5krpm, SAS HDD 46.8GB (PG-HDB45A) 5krpm, SAS (SAS) 300.0GB (PG-HDB35A) 5krpm, SAS Maximum * GB (300.0GB x ) CD-ROM optional (Max 4 ATAPI) *6 PCI Slots PCI Express (x8) [x8] 0 ( : Full Height PCI Express Card or Profile PCI Express Card when PCI Slot Conversion kit (PGBCSU05) is applied. ) PCI-X (64bit/00MHz) [3.3V] 0 ( : Only when PCI Slot Conversion kit (PGBCSU05) is applied. ) PCI-X (64bit/66MHz) [3.3V] : Full Height PCI Card or ( 0 when PCI Slot Conversion kit (PGBCSU05) is applied. ) : Only ( 0 when PCI Slot Conversion kit (PGBCSU05) is applied. ) RAID Controller SAS Controller Onboard Onboard, SAS x ports (with RAID function) FDD - *7 Network Controller (onboard) port (000BASE-T/00BASE-TX/0BASE-T) port (000BASE-T/00BASE-TX/0BASE-T) shared with Remote Management Controller Interfaces Display (Analog RGB), Serial Port (D-SUB 9pins) Keyboard (PS/type Mini DIN 6pins), Mouse (PS/type Mini DIN 6pins), USB x 3 (ver..0) Server Management Software Remote Service function ServerView (Standard) standard (onboard, Remote Management Controller) Power supply Voltage AC 00-7V (50/60Hz) / AC 00-40V (50/60Hz) x (max. ) Power consumption 70W / 97kJ/h (max.) Redundant power supply - Redundant Fan - Dimensions (mm) Weight 49 (48 incl. protruding parts)(w) x 56 (596 incl. protruding parts)(d) x 4 (U) (H) 5kg (max.) Environmental Conditions Temperature0-35 C / Humidity 0-80% (non condensing) OS Support *4 Windows Server 003 R, Standard Edition / Windows Server 003 R, Standard Edition (SP *8) Windows Server 003, Standard Edition (SP/SP *8) Windows Server 003 R, Standard x64 Edition / Windows Server 003 R, Standard x64 Edition (SP *8) Windows Server 003, Standard x64 Edition / Windows Server 003, Standard x64 Edition (SP *8) Windows 000 Server (SP4) Red Hat Enterprise Linux ES (v.4 for x86) *9 / Red Hat Enterprise Linux ES (v.4 for EM64T) *9 Red Hat Enterprise Linux 5 (for x86) *9 *0 / Red Hat Enterprise Linux 5 (for Intel64) *9 *0 Attached tool (Standard) ServerStart (Setup Support tool) * *. Available memory capacity will be changed by the type of OS. Please find more details in Notes[Memory OS Compatibility List]. *. Resolution is determined by functions of the display monitor and OS. *3. HDD capacity is calculated according to the formula GB=000 3 byte. *4. Drivers for Linux are not attached. Please download and use drivers of the following URL. *5. CPU Conversion kit: Xeon 3040(.86GHz/MB) -> Xeon 3070(.66GHz/4MB) (PGBFU3W) is available for upgrading to Dual-Core Intel Xeon 3070 (.66GHz). *6. One CD-ROM or DVD-ROM is required as a minimum in multiple servers. If neither CD-ROM ATAPI (PG-CD34/PGBCD34) nor DVD-RAM ATAPI (PGBDVA0) are ordered, it is necessary to procure USB-CD-ROM or USB-DVD-ROM separately. *7. One USB-FDD is required as a minimum in multiple servers. It is necessary to procure USB-FDD separately. *8. There are some notes for Windows 003 SP. Please refer to Notes of Support Matrix. *9. Regarding supported kernel versions of Linux, please refer to the following list. *0. VM (Virtual Machine) function is not supported. *. ServerStart doesn't support Linux. *. Noise level is 46dB.

5 Configuration Diagram Memory PCI Slots Hard Disk 3.5inch Bay (hot plug) Standard Drive Cage( HDD x ports ) DIMM Slot B DIMM Slot B DIMM Slot A DIMM Slot A CPU Xeon 3070 (.66GHz) / 3040 (.86GHz) PCI 64bit/66MH z *3 PCI 64bit/66MHz *, * Power Supply Unit Bay SAS Bay SAS CD-ROM Drive 3.5 inch HDD Bay (hot plug) 3.5 inch HDD Bay (hot plug) *. PCI : for Full Height PCI card and Profile PCI card *. By applying PCI Slot Conversion kit (PGBCSU05), PCI slot is changed to the slot for Full Height PCI Express card and Profile PCI Express card. *3. PCI : for Profile PCI card ( Full Height PCI card cannot be installed. ) *Components installed as standard configuration marked in grey. Mountable I/O Options () Standard PCI Slot PCI Slot PCI-X Mount Priority Mountable Cards Bus Full Height/ Profile 64bit/ 66MHz Profile Max No. of Mount Remarks 3.3V High SCSI Ctrl U60 lp Eth. Ctrl 000-BASE-T Cu lp PG-30L / PGB30L PG-89L PCI/64bit - PCI-X/64bit [], External SCSI Controller Eth. Ctrl 000-BASE-SX Fibre LC lp PG-88L PCI-X/64bit [] Eth. Ctrl xgbit PCI-X 000-BASE-T lp PG-863L PCI-X/64bit [] Eth. Ctrl xgbit PCI 000-BASE-T lp PG-853L / PGB853L PCI-X/3bit [] No AFT/ALB Support * [n] : Installation Priority * - : cannot be installed () PCI Slot with PCI Slot Conversion kit (PGBCSU05) PCI Slot Mount Priority Mountable Cards Bus PCI Express x8 lane Full Height/ Profile PCI-X 64bit/ 00MHz Profile Max No. of Mount Remarks x8 socket 3.3V High SCSI Ctrl U60 lp Eth. Ctrl 000-BASE-T Cu lp PG-30L / PGB30L PCI/64bit - PG-89L PCI-X/64bit -, External SCSI Controller Eth. Ctrl 000-BASE-SX Fibre LC lp PG-88L PCI-X/64bit - Eth. Ctrl xgbit PCI-X 000-BASE-T lp PG-863L PCI-X/64bit - Eth. Ctrl xgbit PCI 000-BASE-T lp Eth. Ctrl xgbit PCI-E 000-BASE-T lp PG-853L / PGB853L PG-86L / PGB86L PCI-X/3bit - PCI Express (x4) - No AFT/ALB Support Profile PCI Express Card Eth. Ctrl xgbit PCI-E 000-BASE-T lp Eth. Ctrl xgbit PCI-E 000BASE-SX lp PG-89L / PGB89L PG-88L PCI Express (x) PCI Express (x4) - - Profile PCI Express Card Profile PCI Express Card * [n] : Installation Priority * - : cannot be installed

6 Connection Table *CPU Conversion Kit (available only as a Configure To Order (CTO) option; no separate shipment as a loose part is possible) Type Product ID CPU Conversion kit: Dual-Core Intel Xeon 3040(.86GHz/MB) -> Dual-Core Intel Xeon 3070(.66GHz/4MB) Xeon 3040(.86GHz/MB) Convert the CPU installed as standard in the base unit to the other. PGBFU3W -> Xeon 3070(.66GHz/4MB) (Note: This option can be ordered only as coupled with the base unit. (for CTO) A separate shipment as a loose part is not possible.) PCI Card Slot Conversion PCI Slot PCI Slot Conversion kit PGBCSU05 (for CTO) ( Full Height/Profile(PCI-X) x -> Full Height/Profile(PCI Express) x ) Memory Memory Slot Max: 8GB (GB DIMM x 4) Memory Module-5MB (5MB DIMM x ) PG-RM5BE Memory Module: 5MB (5MB DIMM x ) PGBRM5BE (for CTO) * Only one Memory Module can be ordered for CTO. Memory Module-GB (GB DIMM x ) PG-RMBE PGBRMBE (for CTO) Memory Slot Memory Module Conversion kit (for CTO) Memory Module-GB (GB DIMM x ) PG-RMBE PGBRMBE (for CTO) Memory Module Conversion kit-gb 5MB GB (GB DIMM x ) PGBRUBE (for CTO) Memory Module Conversion kit-gb 5MB GB (GB DIMM x ) PGBRUBE (for CTO) *. The order of Memory installation is as following.. [DIMM slot A] -> [DIMM slot B] -> [DIMM slot A]-> [DIMM slot B]. [Memory Module-5MB (5MB DIMM x )] -> [Memory Module-GB (GB DIMM x )] -> [Memory Module-GB (GB DIMM x )] (Available Memory Area) OS Mounted Memory Available Memory Area Windows 000 Server (SP4) / Windows Server 003, Standard Edition (SP) / Windows Server 003 R, Standard Edition Windows Server 003, Standard x64 Edition / Windows Server 003 R, Standard x64 Edition Red Hat Enterprise Linux ES (v.4 for EM64T) / Red Hat Enterprise Linux 5 (for Intel64) ~3.5GB 4.0GB ~8.0GB ~.5GB 3.0GB~4.5GB 5.0GB~8.0GB Same as the size of mounted memory Size of Mounted Memory minus "0.5GB" Same as the size of mounted memory Same as the size of mounted memory Size of Mounted Memory minus "0.GB" Size of Mounted Memory minus "0.GB" Red Hat Enterprise Linux ES (v.4 for x86) / Red Hat Enterprise Linux 5 (for x86) ~3.5GB 4.0GB~8.0GB Same as the size of mounted memory Size of Mounted Memory minus "0.3GB"

7 Connecting Internal HDD and Internal Backup Devices If you would like to order internal HDD and internal backup devices, please order optional cards/cables according to the following table. Type of HDD connection PRIMERGY SX0 Internal Backup Devices Connection Interface SCSI Wide ('') Backup Devices Connection SAS / RAID Onboard SAS SCSI Card (PG-30L/PGB30L) SCSI Cable (PG-CBLS007/PG-CBLS008) ('') SCSI Wide Backup Devices: PG-DT50/PG-LT30 /PG-LT0/PG-LT0 Internal HDD on board SAS controller SAS / RAID Configuration Max: HDDs HDD SAS 5k 73GB hot plug 3.5inch PG-HDB75A *. RAID configuration can be set. PGBHDB75A (for CTO) HDD SAS 5k 47GB hot plug 3.5inch PG-HDB45A PGBHDB45A (for CTO) HDD SAS 5k 300GB hot plug 3.5inch PG-HDB35A PGBHDB35A (for CTO) Internal CD-ROM/DVD-RAM External CD-ROM/DVD-ROM On Board IDE Controller Max : CD-ROM ATAPI PG-CD34 PGBCD34 (for CTO) DVD-RAM ATAPI PGBDVA0 (for CTO) USB CD-ROM/DVD-ROM USB Extension Cable PG-CBLU00 Internal backup device (PRIMERGY SX0) PCI Bus SCSI Ctrl U60 lp SCSI Cable HDCI.8m PRIMERGY SX0 PG-30L PG-CBLS007 PG-RBC4 PGB30L (for CTO) SCSI Cable HDCI 5m PG-CBLS008 *Please find more information on the internal backup devices for PRIMERGY SX0 in Rackmount [Internal Backup Devices with PRIMERGY SX0 ]

8 LAN Card (Standard PCI Slot) On-board LAN PCI Bus Eth. Ctrl xgbit PCI-X 000-BASE-T lp PG-863L Twist Pair Cable ( Category 5e) * Dual Port Eth. Ctrl 000-BASE-T Cu lp PG-89L Eth. Ctrl xgbit PCI 000-BASE-T lp PG-853L PGB853L (for CTO) * No AFT/ALB Support Eth. Ctrl 000-BASE-SX Fibre LC lp PG-88L Multi Mode Fibre Channel Cable LAN Card (PCI Slot with PCI Slot Conversion kit On-board LAN PCI Express Bus Eth. Ctrl xgbit PCI-E 000-BASE-T lp PG-86L Twist Pair Cable ( Category 5e) PGB86L (for CTO) * Dual Port Eth. Ctrl xgbit PCI-E 000-BASE-T lp PG-89L PGB89L (for CTO) Eth. Ctrl xgbit PCI-E 000BASE-SX lp PG-88L Multi Mode Fibre Channel Cable PCI Bus Eth. Ctrl xgbit PCI-X 000-BASE-T lp PG-863L Twist Pair Cable ( Category 5e) * Dual Port Eth. Ctrl 000-BASE-T Cu lp PG-89L Eth. Ctrl xgbit PCI 000-BASE-T lp PG-853L PGB853L (for CTO) * No AFT/ALB Support Eth. Ctrl 000-BASE-SX Fibre LC lp PG-88L Multi Mode Fibre Channel Cable Server Management (Remote Management Controller) on board LAN Twist Pair Cable ( Category 5e) Remote Management Ctrl Upgrade kit PG-RMCU Specifications are subject to change without notice. For the latest detailed information, contact your local representative. All brand names and product names are trademarks and registered trademarks of their respective holders. 007 Fujitsu Limited. All rights reserved. Printed in Japan. Global Business Development & Marketing Business Strategy & Planning System Products URL