PROGETTI DI NORMA ISO IN INCHIESTA Allegato al n. 17 di UNInotizie del 30 settembre 2012 PROGETTI ISO AL VOTO PRELIMINARE I progetti ISO in inchiesta pubblica possono essere acquistati contattando l Ufficio Diffusione: fax 02 5515256 - email: diffusione@uni.com Period from 01 August to 31 August 2012 * Available in English only Air quality ISO/DIS 17091* Workplace air Determination of lithium hydroxide, sodium hydroxide, potassium hydroxide and calcium dihydroxide Method by measurement of corresponding cations by suppressed ion chromatography Data di scadenza: 2013-01-27 ISO/DIS 16000-21* Indoor air Part 21: Detection and enumeration of moulds Sampling from materials ISO/DIS 16000-29* Indoor air Part 29: Test methods for VOC detectors ISO/DIS 16000-30* Indoor air Part 30: Sensory testing of indoor air ISO/DIS 16000-31* Indoor air Part 31: Measurement of flame retardants and plasticizers based on organophosphorus compounds Phosphoric acid ester ISO/DIS 16000-32* Indoor air Part 32: Investigation of buildings for pollutants and other injurious factors Inspections Bases for design of structures ISO/DIS 13033* Seismic actions on nonstructural components for building applications Dimensional and geometrical product specifications and verification ISO/DIS 2692* Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (Revision of ISO 2692:2006) 1
ISO 3040:2009/DAmd 1* Geometrical product specifications (GPS) Dimensioning and tolerancing Cones ISO/DIS 10360-10* Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMS) Part 10: Laser trackers for measuring point-to-point distances ISO 14405-1:2010/DAmd 1* Geometrical product specifications (GPS) Dimensional tolerancing Part 1: Linear sizes Fluid power systems ISO/DIS 6358-3.2* Pneumatic fluid power Determination of flow-rate characteristics of components Part 3: Method for calculating steady-state flow-rate characteristics of assemblies (Revision of ISO 6358:1989, ISO/CD 6358-5) Data di scadenza: 2012-10-22 Food products ISO 9167-1:1992/DAmd 1* Rapeseed Determination of glucosinolates content Part 1: Method using high-performance liquid chromatography ISO/DIS 11133* Microbiology of food, animal feed and water Preparation, production, storage and performance testing of culture media (Revision of ISO/TS 11133-2:2003, ISO/TS 11133-1:2009, ISO/TS 11133-2:2003/Amd 1:2011) Health informatics ISO/DIS 18104* Health informatics Categorical structures for representation of nursing diagnoses and nursing actions in terminological systems (Revision of ISO 18104:2003) ISO/DIS 20301* Health informatics Health cards General characteristics (Revision of ISO 20301:2006) Data di scadenza: 2012-11-17 ISO/HL7 DIS 21731* Health informatics HL7 version 3 Reference information model Release 1 (Revision of ISO/HL7 21731:2006) Information and documentation ISO/DIS 2789* Information and documentation International library statistics (Revision of ISO 2789:2006) Data di scadenza: 2012-11-22 Information technology ISO/IEC DIS 25063.2* Systems and software engineering Systems and software product Quality Requirements and Evaluation (SQuaRE) Common Industry Format (CIF) for usability: Context of use description Data di scadenza: 2012-10-18 2
ISO/IEC DIS 25064.2* Systems and software engineering Software product Quality Requirements and Evaluation (SQuaRE) Common Industry Format (CIF) for usability: User needs report Data di scadenza: 2012-10-18 ISO/IEC DIS 8652* Information technology Programming languages Ada (Revision of ISO/IEC 8652:1995, ISO/ IEC 8652:1995/Cor 1:2001, ISO/IEC 8652:1995/Amd 1:2007) Data di scadenza: 2012-11-16 ISO/IEC DIS 23006-1.2 Information technology Multimedia service platform technologies Part 1: Architecture (Revision of ISO/IEC CD 23006, ISO/IEC 23006-1:2011) Data di scadenza: 2012-10-04 ISO/IEC DIS 23006-5.2 Information technology Multimedia service platform technologies Part 5: Service aggregation Data di scadenza: 2012-10-10 IULTCS - International Union of Leather Technologists and Chemists Societies ISO/DIS 17070* Leather Chemical tests Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentchlorophenol content (Revision of ISO 17070:2006) ISO/DIS 18218-1* Leather Determination of ethoxylated alkylphenols Part 1: Direct method ISO/DIS 18218-2* Leather Determination of ethoxylated alkylphenols Part 2: Indirect method Machine tools ISO/DIS 11090-1* Test conditions for die sinking electro-discharge machines (EDM) Terminology and testing of accuracy Part 1: Single-column machines (cross-slide table type and fixed-table type) (Revision of ISO 11090-1:1998) Data di scadenza: 2013-01-09 ISO/DIS 11090-2* Test conditions for die sinking electro-discharge machines (EDM) Terminology and testing of accuracy Part 2: Double-column machines (slide-head type and cross-slide table type) (Revision of ISO 11090-2:1998) Data di scadenza: 2013-01-09 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries ISO/DIS 21809-2* Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 2: Single layer fusion-bonded epoxy coatings (Revision of ISO 21809-2:2007, ISO 21809-2:2007/Cor 1:2008) Metallic and other inorganic coatings ISO/DIS 14920* Thermal spraying Spraying and fusing of self-fluxing alloys (Revision of ISO 14920:1999) Data di scadenza: 2013-01-17 3
Nuclear energy, nuclear technologies, and radiological protection ISO/DIS 12799* Nuclear energy Determination of nitrogen content in UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets - Inert gas extraction and conductivity detection method ISO/DIS 15651* Nuclear energy Determination of total hydrogen content in PuO2 and UO2 powders and UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets Inert gas extraction and conductivity detection method ISO/DIS 16966* Nuclear energy Nuclear fuel technology Theoretical activation calculation method to evaluate the radioactivity of activated waste generated at nuclear reactors Optics and photonics ISO/DIS 8980-3.2* Ophthalmic optics Uncut finished spectacle lenses Part 3: Transmittance specifications and test methods (Revision of ISO 8980-3:2003) Data di scadenza: 2012-11-06 Personal safety - Protective clothing and equipment ISO/DIS 20346* Personal protective equipment Protective footwear (Revision of ISO 20346:2004, ISO 20346:2004/Cor 1:2005, ISO 20346:2004/Amd 1:2007, ISO 20346:2004/Cor 2:2006) Plastics ISO/DIS 16525-9* Adhesives Test methods for isotropically electrically conducting adhesives Part 9: Determination of high-speed signal-transmission characteristics Data di scadenza: 2013-01-14 REMCO - Committee on reference materials ISO/DGuide 80* Guidance for in-house production of reference materials for quality control (QCMs) Data di scadenza: 2012-12-29 Road vehicles ISO 10605:2008/DAmd 1* Road vehicles Test methods for electrical disturbances from electrostatic discharge Data di scadenza: 2012-11-30 Rubber and rubber products ISO/DIS 6808* Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids Specification ISO/DIS 16301* Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for hydraulic jacks and for hydraulic power units used in hydraulic tools Specification ISO/DIS 5999* Flexible cellular polymeric materials Polyurethane foam for load-bearing applications excluding carpet underlay Specification (Revision of ISO 5999:2007) 4
Ships and marine technology ISO/DIS 16707* Ships and marine technology Marine evacuation systems Determination of capacity Data di scadenza: 2013-01-05 Societal security ISO/DIS 22398.2 Societal security Guidelines for exercises and testing Data di scadenza: 2012-10-25 Steel ISO/DIS 13933* Steel and iron Determination of calcium and magnesium Inductively coupled plasma atomic emisson spectrometric method Data di scadenza: 2013-01-29 Steel wire ropes ISO/DIS 16839* Steel wire ropes Determination of the compliance characteristics of steel wire ropes subjected to lateral load Sterilization of health care products ISO/DIS 11140-1* Sterilization of health care products Chemical indicators Part 1: General requirements (Revision of ISO 11140-1:2005) Tourism and related services ISO/DIS 14785* Tourist information offices Tourist information and reception services Requirements Tractors and machinery for agriculture and forestry ISO/DIS 5721-2* Agricultural tractors-- Requirements, test procedures and acceptance criteria for the operator s field of vision Part 2: Field of vision to the side and to the rear (Revision of ISO 5721:1989) Tyres, rims and valves ISO/DIS 20562* Tyre valves ISO core chambers No. 1, No. 2, No. 3 and No. 4 (Revision of ISO 20562:2004) Data di scadenza: 2013-01-14 Welding and allied processes ISO/DIS 2553.2* Welding and allied processes Symbolic representation on drawings Welded, brazed and soldered joints (Revision of ISO 2553:1992) Data di scadenza: 2012-10-31 ISO/DIS 14555* Welding Arc stud welding of metallic materials (Revision of ISO 14555:2006) 5