www.damuth.com 2014 Fall Training Schedule Classes in Commercial HVAC Systems Energy Engineering Systems Technical TRAINING What s Inside Damuth Trane 757-558-0200 main 757-558-9715 fax Trane HVAC Parts & Supplies: 1104 Cavalier Blvd. 757-558-8585 main 757-558-9713 fax 230 Clearfield Ave. Suite 126 Virginia Beach, VA 23462 757-490-2390 main 757-490-2937 fax Engineers Newsletter Live: Applying VRF Systems Tracer Summit C.D.S. - TRACE 700 Tracer SC Engineers Newsletter Live: Energy Saving Strategies for Chilled Water Terminal Systems AERCO Boiler Training Refrigerant Transitions in the HVAC Industry 507 Muller Lane Newport News, VA 23606 757-369-9400 main 757-369-9401 fax
Fall 2014 Damuth Trane Engineers Newsletter Live: Applying VRF Systems Date: Thursday, September 11, 2014 Time: 12:00-2:00 PM (Lunch will be served at 11:30 AM) Cost: FREE! Description: All HVAC systems have their own set of application challenges. In this broadcast, we will discuss some of the challenges when applying a variable refrigerant flow (VRF) system, such as complying with ASHRAE Standards 15 and 90.1, meeting the ventilation requirements of ASHRAE Standard 62.1, and zoning to maximize the benefit of heat recovery. In addition, we will review the current state of modeling VRF in energy simulation software. Presenters: Paul Solberg - Trane Systems Engineer, Eric Sturm - Trane Applications Engineer, Dave Guckelberger - Trane Applications Engineer, John Murphy - Trane Applications Engineer Satellite broadcasts are eligible for 1.5 CEUs for Virginia Professional Engineer s license. Broadcasts are also eligible for AIA and LEED Continuing Education Hours. All certificates will be emailed after the seminar. Tracer Summit Date: Wednesday, September 24, 2014 Time: 8:00 AM - 4:00 PM (Breakfast & Lunch will be served) Cost: $75 per person Target Audience: Building Owners and Operators Only Description: The Tracer Summit Building Automation System provides building control through a single, integrated system. A building s climate, lighting, energy consumption, scheduling, and other controllable features can all be programmed and managed by Tracer Summit building control units (BCUs). Instructor: Gary Pavlus, Damuth Trane BAS Service Systems Specialist Page 1
Training Schedule C.D.S - TRACE 700 Dates: 8:00 AM - 4:00 PM Each Day (Breakfast & Lunch will be served each day) Day 1: TRACE 700 Load Design -October 7, 2014 Day 2: Energy Analysis - October 8, 2014 Day 3: ASHRAE 90.1 / LEED and TRACE 700 - October 9, 2014 Cost: $160 per person, per day Target Audience: Consulting Engineers Descriptions: Day 1: TRACE 700 Load Design During this training you will model complex building geometrices and systems to fine-tune the design of critical building features. Examine the programs time saving templates of construction types, weather data, etc, and build schedules to control occupancy, lighting and miscellaneous building loads. Day 2: Energy Analysis Learn how to show the benefits of advanced HVAC technology on high efficiency equipment by comparing its energy and economic benefits with those of a base system. Be smarter when choosing equipment that will provide the best comfort at the lowest cost to the building owner. Find out how to customize utility rate information and turn it into actual dollar figures. Day 3: ASHRAE 90.1 / LEED and TRACE 700 Provides a fundamental overview of ASHRAE/IESNA Standard 90.1 and LEED with a focus on Energy and Atmosphere Credit 1: Optimized Energy Performance. The class begins with the background and impact of ASHRAE 90.1 as well as guidance through the Standard. The focus of this class is on the Energy Cost Budget (ECB) and Performance Rating methodologies (PRM) with an emphasis on TRACE 700 strategies to achieve sustainable designs. Instructor: Kit Fransen, C.D.S. Customer Training Manager Tracer SC Date: Thursday, October 23, 2014 Time: 8:00 AM 3:00 PM (Breakfast & Lunch will be served) Cost: $75 per person Target Audience: Building Owners and Operators Only Description: The Tracer SC System controller acts as the central coordinator for all individual equipment devices on a Tracer building automation system. It communicates with unit controllers that provide standalone control of heating, ventilation, and air conditioning (HVAC) equipment. Join us for our Tracer SC training! Instructor: David Bannon, Damuth Trane BAS Project Technician Page 2
Fall 2014 Damuth Trane Engineers Newsletter Live: Energy- Saving Strategies for Chilled Water Terminal Systems Date: Wednesday, November 5, 2014 Time: 12:00-2:00 PM (Lunch will be served at 11:30 AM) Cost: FREE! Description: Many chilled-water terminal products (such as fan coils, blower coils, and unit ventilators) are now available with electronically commutated motors (ECMs). In addition to higher motor efficiency, this makes these products capable of variable airflow operation (i.e., single-zone VAV). This ENL will discuss system design and control strategies for reducing energy use in chilled-water terminal systems. Topics include: variable-speed terminal fan operation, impact of ventilation system design, low-flow chilled-water system design, waterside economizing, waterside heat recovery, and meeting ASHRAE 90.1 requirements. Presenters: John Murphy - Trane Applications Engineer, Mick Schwedler - Trane Applications Engineer, Darcy Lee - Product Portfolio Manager Satellite broadcasts are eligible for 1.5 CEUs for Virginia Professional Engineer s license. Broadcasts are also eligible for AIA and LEED Continuing Education Hours. AERCO Boiler Training Location: Damuth Trane Date: December 2014 TBD Time: TBD *Stay tuned for more details on the AERCO Boiler Training coming in December 2014!* Description: AERCO has been an industry leader in water heating design for over 50 years. We have solutions that fit all segments of the water heater and boiler market. From the smallest elementary school to the largest of Las Vegas hotel casinos, AERCO provides the highest-quality products and system designs that deliver hot water and space heating with the greatest efficiency and performance. This training will be geared more towards the technical side of AERCO Boilers. Page 3
Training Schedule Refrigerant Transitions in the HVAC Industry Location: Damuth Trane Date: January 14, 2015 Time: 8:00 AM - 9:30 AM (Breakfast served at 7:30 AM) Location: Marriott Hotel at City Center 740 Town Center Drive Newport News, VA 23606 Date: January 14, 2015 Time: 12:00-1:30 PM (Lunch served at 11:30AM) Cost: FREE! Description: Join us for a seminar on the Refrigerant Transitions in the HVAC Industry. Presenter: Jim Wolfe, President of Global Policy Associates, a consulting group providing technology consulting and policy development advocacy at the national and international levels with an emphasis on ozone protection, climate change, energy efficiency technology, and green building design. He has 47 years of experience in the building technology industry and has held positions with The Trane Company and American-Standard as Vice President, Government Affairs and as Vice President and Chairman, Trane Environmental Policy Council. To Register: Email: anna.tucker@damuth.com Register Online at damuth.com Questions? Call: 558-3304 Don t see what you are looking for? We offer onsite, one-on-one training, customized for your facility s needs. Call us to discuss what we can do for you. Get the most up-to-date training information at www.damuth.com/training Page 4
Damuth Trane www.damuth.com