Prefix S SS SSB 815 Cha Information Cha M. Side-flex Radius Approximate desc /ft / m 2-1/4 2. 57. 2 - - 1.43 2.12 2-5/8 2.63 66. 7 - - 1.60 2.37 3-1/4 82. 6 - - 1.84 2.73 4 4.00 101. 6 - - 2.14 17 4-1/2 4.50 114. 3 - - 2.34 47 6 6.00 152. 4 - - 2.94 4.36 7-1/2 7.50 190. 5 - - 54 5. Cha Material Staless Staless Low Magnetic Cha is shown Staless (SS) material. Standard materials are highlighted. All other materials are available on a made-to-order basis. Cha strength is listed at room temperature. NR = Not Recoended. Regulatory Information The Food and Drug Adistration (FDA) accepts certa materials for direct food contact. FDA approved material is compliant to FDA CFR 177. Rexnord, Rex and TableTop are trademarks of Rexnord Industries, Inc. All rights reserved. DIRECTION OF TRAVEL M. Back-flex Radius 6.50 (165.1 ) Cha 1.50 (38.1 ) Cha Drawg Cha Plate Bottom to Cha Bottom 0.38 (9.5 ) P Diameter 0. (6.4 ) Height Over Centerle 0. (6.4 ) Thickness 0.12 (1 ) Overall 1.69 (42.9 ) Guide Clearance 1.75 (44.4 ) Available Materials Temperature Cha Standard Fahrenheit Celsius FDA Strength P Material Approval N - + 350 NR - + 177 NR 6 2,780 - Staless -100 + 800 + 2-73 + 4 + 100 6 2,780! Staless -100 + 800 + 2-73 + 4 + 100 6 2,780! Additional Notes 1. Stocked 80 pitch, 10 ft (048 m) length strands. 2. Staless steel is austenitic. Rex 815 Series TableTop Cha Product Portfolio TT - 815-1 Rex 815 TableTop Cha Straight Runng
Straight Runng Rex 815 TAB TableTop Cha Prefix S SS 815 TAB Cha Information Cha M. Side-flex Radius Approximate desc /ft / m 3-1/4 82.55 - - 2.12 14 4-1/2 4.50 114. - - 2.62 88 7-1/2 7.50 190.50 - - 82 5.67 TT - 815-2 Cha Material Staless Cha is shown (S) material. Standard materials are highlighted. All other materials are available on a made-to-order basis. Cha strength is listed at room temperature. NR = Not Recoended. Regulatory Information The Food and Drug Adistration (FDA) accepts certa materials for direct food contact. FDA approved material is compliant to FDA CFR 177. Rexnord, Rex and TableTop are trademarks of Rexnord Industries, Inc. All rights reserved. DIRECTION OF TRAVEL M. Back-flex Radius 6.50 (165.1 ) Cha 1.50 (38.1 ) Cha Drawg Cha Plate Bottom to TAB Bottom 0.64 (16.2 ) P Diameter 0. (6.4 ) Height Over Centerle 0. (6.4 ) Thickness 0.12 (1 ) Overall 1.69 (42.9 ) Plate Bottom to TAB Top 0.52 (11 ) Guide Clearance 1.75 (44.4 ) Available Materials Temperature Cha Standard Fahrenheit Celsius FDA Strength P Material Approval N - + 350 NR - + 177 NR 6 2,780 - Staless -100 + 800 + 2-73 + 4 + 100 6 2,780! Additional Notes 1. Stocked 80 pitch, 10 ft (048 m) length strands. 2. Staless steel is austenitic. Rex 815 TAB TableTop Cha utilizes 881 series sprockets only. Rex 815 Series TableTop Cha Product Portfolio
Prefix SS 815 TAB Transfer Cha Information Cha M. Side-flex Radius Approximate desc /ft / m 7-1/2 7.50 190. 5 - - 75 5.56 Cha Material Staless Cha is shown Staless (SS) material. Standard materials are highlighted. All other materials are available on a made-to-order basis. Cha strength is listed at room temperature. NR = Not Recoended. Regulatory Information The Food and Drug Adistration (FDA) accepts certa materials for direct food contact. FDA approved material is compliant to FDA CFR 177. Rexnord, Rex and TableTop are trademarks of Rexnord Industries, Inc. All rights reserved. DIRECTION OF TRAVEL M. Back-flex Radius 6.50 (165.1 ) Cha 1.50 (38.1 ) Cha Cha Drawg Plate Bottom to TAB Bottom 0.64 (16.2 ) P Diameter 0. (6.4 ) Height Over Centerle 0. (6.4 ) Thickness 0.12 (1 ) Overall 1.69 (42.9 ) Blade 1.00 (.4 ) Plate Bottom to TAB Top 0.52 (11 ) Guide Clearance 1.75 (44.4 ) Available Materials Temperature Cha Standard Fahrenheit Celsius FDA Strength P Material Approval N Staless -100 + 800 + 2-73 + 4 + 100 6 2,780! Additional Notes 1. Stocked 80 pitch, 10 ft (048 m) length strands. 2. Staless steel is austenitic. Rex 815 TAB TableTop Cha with Transfer Top Plate utilizes 881 series sprockets only. Rex 815 Series TableTop Cha Product Portfolio TT - 815-3 Rex 815 TAB TableTop Cha with Transfer Top Plate Straight Runng
815 Semi- Arm Body Sprocket 815 Semi- Block Body Sprocket NS815 Thermoplastic Split Sprocket 1.50 (38.1 ) 1.68 (42.7 ) 1.68 (42.7 ) and Supplied with guide rgs attached. 2.00 (50.8 ) 2.16 (54.9 ) Rex 815 Series TableTop Cha Compatible Sprockets 815 Semi- Arm Body Sprocket Information (Shaft-Ready) Diameter () Approximate 19 9-1/ 2 4.6 117.35 4.61 117. 1 1 1-1/ 28 1.49 10 4.854 1229 4.86 12 4 1 1-1/ 81 1.73 1. 0 1 1-3/ 4.63 2.10 22 11 5.324 135. 5.35 135. 9 1 1-3/ 4. 1.91 11-1/ 2 5.560 141.22 5.59 0 1 1-3/ 5.31 2.41 24 12 5.796 147.22 5.83 148. 1 1 1-3/ 4.41 2.00 15 2 1 1-3/ 5.57 2.53 13-1/ 2 6.504 165. 6 1 1-3/ 6.50 2.95 29 14-1/ 2 6.978 177.24 7.05 179. 1 1 1-3/ 6.72 05 31 15-1/ 2 7.2 189.28 7.53 191. 3 1 1-3/ 6.86 11 41-1/ 2 9.826 249.58 9.93 2. 2 1 2-1/ 2 65 - - - - 1 2-1/ 2 65 16. 7.36 Shaft-ready round bores are shipped with keyway and setscrews. Metric shaft-ready round bores are shipped with metric hardware, but without setscrews. 815 Semi- Block Body Sprocket Information (Shaft-Ready) Diameter () Approximate 13 6-1/ 2 228 81.99 11 79. 0 1 1-1/ 2. 1.11 15 7-1/ 2 688 968 63 92. 2 1 1-1/ 57 1.62 17 8-1/ 2 4.152 105.46 4.12 104. 7 1 1-11/16 - - - - 1 1-11/16 4.83 2.19 1. 0 1 2-11/16 70 - - - - 1 2-11/16 70 4.63 2.10 15 2 1 3-7/16 90 - - - - 1 3-7/16 90 5.57 2.53 Shaft-ready round bores are shipped with keyway and setscrews. Metric shaft-ready round bores are shipped with metric hardware, but without setscrews. NS815 Thermoplastic Split Sprocket Information (Shaft-Ready) Diameter (Idler) Approximate 1. 0 1 1-5/ 1.01 0.46 11-1/ 2 5.560 141.22 5.59 0 1 1-5/ 1.19 0.54 15 2 1 2 50 - - - - 1 2 50 1.39 0.63 13-1/ 2 6.504 165. 6 1 1-5/ 1.76 0.80 Shaft-ready round bores are shipped with keyway and setscrews. Metric shaft-ready round bores are shipped with metric hardware, but without setscrews. Idler bores are designed to sp freely on the shaft without keyway or setscrews. TT - 815-4 Rex 815 Series TableTop Cha Product Portfolio
8 Semi- Arm Body Sprocket 8 Semi- Block Body Sprocket NS8 Thermoplastic Split Sprocket Shipped as an 815 semi-steel grooved arm body sprocket. 1.50 (38.1 ) 1.68 (42.7 ) Shipped as an 815 semi-steel grooved block body sprocket. 1.68 (42.7 ) and 1.68 (42.7 ) 2.00 (50.8 ) 8 Semi- Arm Body Sprocket Information (Shaft-Ready) Diameter () Approximate 19 9-1/ 2 4.622 117.35 4.61 117. 1 1 1-1/ 28 1.49 10 4.854 1229 4.86 12 4 1 1-1/ 81 1.73 1. 0 1 1-3/ 4.63 2.10 22 11 5.324 135. 5.35 135. 9 1 1-3/ 4. 1.91 11-1/ 2 5.560 141.22 5.59 0 1 1-3/ 5.31 2.41 24 12 5.796 147.22 5.83 148. 1 1 1-3/ 4.41 2.00 15 2 1 1-3/ 5.57 2.53 13-1/ 2 6.504 165. 6 1 1-3/ 6.50 2.95 29 14-1/ 2 6.978 177.24 7.05 179. 1 1 1-3/ 6.72 05 31 15-1/ 2 7.2 189.28 7.53 191. 3 1 1-3/ 6.86 11 41-1/ 2 9.826 249.58 9.93 2. 2 1 2-1/ 2 65 - - - - 1 2-1/ 2 65 16. 7.36 Shaft-ready round bores are shipped with keyway and setscrews. Metric shaft-ready round bores are shipped with metric hardware, but without setscrews. 8 Semi- Block Body Sprocket Information (Shaft-Ready) Diameter () Approximate 13 6-1/ 2 228 81.99 11 79. 0 1 1-1/ 2. 1.11 15 7-1/ 2 688 968 63 92. 2 1 1-1/ 57 1.62 17 8-1/ 2 4.152 105.46 4.12 104. 7 1 1-11/16 - - - - 1 1-11/16 4.83 2.19 1. 0 1 2-11/16 70 - - - - 1 2-11/16 70 4.63 2.10 15 2 1 3-7/16 90 - - - - 1 3-7/16 90 5.57 2.53 Shaft-ready round bores are shipped with keyway and setscrews. Metric shaft-ready round bores are shipped with metric hardware, but without setscrews. NS8 Thermoplastic Split Sprocket Information (Shaft-Ready) Diameter (Idler) Approximate 1. 0 1 1-5/ 1.01 0.46 11-1/ 2 5.560 141.22 5.59 0 1 1-5/ 1.19 0.54 15 2 1 2 50 - - - - 1 2 50 1.39 0.63 13-1/ 2 6.504 165. 6 1 1-5/ 1.76 0.80 Rex 815 Series TableTop Cha Compatible Sprockets Shaft-ready round bores are shipped with keyway and setscrews. Metric shaft-ready round bores are shipped with metric hardware, but without setscrews. Idler bores are designed to sp freely on the shaft without keyway or setscrews. Rex 815 Series TableTop Cha Product Portfolio TT - 815-5
815/8 Idler Wheel 2.19 (55.6 ) 2.44 (62.0 ) 815/8 Idler Wheel Information Rex 815 Series TableTop Cha Compatible Sprockets Equivalent Tooth Size Diameter (Idler) Approximate 5.11 129. 8 1 7/ 8 1-3/16 1-1/ 4 1-1/ 2 - - 35 - - - 0.49 0.22 5.60 2 1 7/ 8 1-3/16 1-1/ 4 1-1/ 2 - - 35 - - - 0.59 0. 6.09 7 1 7/ 8 1-3/16 1-1/ 4 1-1/ 2 - - 35 - - - 0.66 0. 6 - - - 1-1/ 4 - - - - - - - - - - 0.70 0.32 Idler bores are designed to sp freely on the shaft without keyway or setscrews. tooth idler wheel is available on a made-to-order basis and is subject to imum order requirements. TT - 815-6 Rex 815 Series TableTop Cha Product Portfolio
Guide Rgs Thickness One set = two guide rgs and six assembly screws (Part #114-115-1). For 815 and 8 semi-steel sprockets only. Part Sprocket Diameter Thickness Approximate Staless Teeth W803-AC W803-YYC 15-16 62 91. 9 0.06 1. 5 0. 0.10 W805-AC W805-YYC 17-18 4.11 104. 4 0.06 1. 5 0.26 0.12 W868-AC W868-YYC 19-4.58 116. 3 0.13 3 0.37 0.17 W864-AC W864-YYC -22 5.09 129. 3 0.13 3 0.44 0. W863-AC W863-YYC -24 5.56 141. 2 0.13 3 0.46 0. W865-AC W865-YYC -26 6.04 15 4 0.13 3 0.47 0. W866-AC W866-YYC -28 6.53 165. 9 0.13 3 0.53 0.24 W867-AC W867-YYC 29-7.02 178. 3 0.13 3 0.56 0. W862-AC W862-YYC 31-32 7.50 190. 5 0.13 3 0.67 0. W869-AC W869-YYC 41-42 9.89 1. 2 0.13 3 0.92 0.42 Rex 815 Series TableTop Cha Accessories Rex 815 Series TableTop Cha Product Portfolio TT - 815-7