FMS Issues and In-Service Status
C&PS Flight Technical Services This material was developed by: Customer & Product Support Flight Technical Services This material Honeywell was Aerospace developed by: C&PS www.honeywelltraining.com Flight Operations Honeywell Aerospace www.honeywelltraining.com To order this publication: log on to: http://portal.honeywell.com/wps/portal/aero or call: 1-800-601-3099 (U.S. & Canada) or 1-602-365-3099 (International) Publication Number: N/A Cage Code: 55939
Proprietary and Limitations Notice This document and the information disclosed herein are proprietary data of Honeywell International Inc. Neither this document nor the information contained herein shall be reproduced, used, or disclosed to others without the written authorization of Honeywell International Inc., except for training on recipient s equipment. Notice Freedom Of Information Act (5 USC 552) And Disclosure Of Confidential Information Generally (18 USC 1905) This document is being furnished in confidence by Honeywell International Inc. The information disclosed herein falls within exemption (b) (4) of 5 USC 552 and the prohibitions of 18 USC 1905. ECCN 7E994; Schedule B Number 8524.31.0070 C&PS Flight Technical Services / Global Data Center Notice Of Limitations The information contained herein has been compiled for training purposes only. Its use shall be limited to such applications. For exclusive use by Honeywell customers. Not for reproduction or distribution to other avionic manufacturers. Copyright Notice Copyright 2012 Honeywell International Inc. All rights reserved. Honeywell is a registered trademark of Honeywell International Inc. All other marks are owned by their respective companies. Honeywell International Inc. C&PS Flight Technical Services 21111 N. 19 th Ave. Phoenix, AZ 85027-2708 U.S.A.
Purpose Purpose of the presentation is to review current issues (SILs, TNLs, etc.) on existing Honeywell Flight Management Systems. These issues are not common and are not found on all aircraft platforms but are presented to promote awareness through communication. All information provided is already published and can be accessed through www.honeywell.com/aero/alert. Questions on specific aircraft platforms can be addressed by contacting the OEM approved service center, an OEM field service engineer or Honeywell Customer & Product Support Manager or Field Service Engineer.
Agenda Significant FMS issues Automatic Chart Linking Inoperative FMS turns when no overfly requirement exists Summary of new removal Issues Honeywell SIL D201011000003 (Rev 9) Direct Leg Early Sequencing Item J Course to Fix Flight Plan Legs - Item K Honeywell SIL D201212000036 Wrong Turn Due to Incorrect Leg Sequencing How to locate removed procedures New issues since Q2-2012
EPIC INDS Automatic Chart Linking Issue Operator and Flight Safety both reported that when they load an approach on the FMS, the Charts function was not automatically loaded with the approach and the chart had to be selected manually Background Affects all EPIC INDS certifications that utilize the charts function Issue is an oversize file on the navigation database Approach charts are still available Currently only observed on aircraft where the RNP-AR database is used as well as PC-12 operators that utilize the world wide database Resolution Database mitigation will take place to reduce the suspect file size Will prevent chart linking for shorter runways Will allow approximately 90% of the approaches to be linked In place by Q2-2013
FMS Turns Resulting in Altitude Violations Issue FMZ-2000 operator flying a non-vnav equipped aircraft reported that while flying a terminal area procedure, the FMS sequenced a waypoint 2NM prior to reaching the waypoint, then turned to the next waypoint, resulting in the altitude restriction not being met at the first waypoint Background In the illustration to the right, aircraft is flying B from A to B to C B does not have an overfly bit so the FMS turns prior to B to proceed to C (blue line) May result in a turn 20NM prior to B depending on the groundspeed and bank factor Although the waypoint may be laterally A sequenced, it will not vertically sequence until the FMS is abeam of the waypoint (red line) Resolution Flight crews of non-vnav aircraft are encouraged to monitor their altitude and vertical profile as required to ensure the restrictions are met C
Procedure Removals SIL D201011000003 Reference SIL for specific aircraft affected Can be downloaded from www.honeywell.com/aero/alert (no login required. Dated 14 Sept 2012 (Rev 9) 2787 procedures removed from navigation database as of 2013 Cycle 01 to mitigate high risk issues List of procedures impacted can be downloaded at: www.honeywellaes.com www.epicinds.com
Direct Leg Early Sequencing SIL D201011000003 Item J All NZ-2000 software Including all IC-615/800/1080 FMS platforms All Primus Epic except: AW139 Lower airspeed does not exhibit issue Found July 2012 FMS could turn in a direction opposite of the published chart
Direct Leg Early Sequencing (cont.) Examples: Green arrows indicate expected behavior Red line indicates actual FMS path Direct-to-fix (DF) leg too small for FMS to compute solution, FMS sequences immediately and drops the turn bit, resulting in navigation to the next waypoint Turn calculation may result in a turn opposite than expected
Course to Fix Flight Plan Legs SIL D201011000003 Item K All NZ-2000 software Including all IC-615/800/1080 FMS platforms All Primus Epic except: AW139 Lower airspeed does not exhibit issue Found July 2012 FMS could turn early in a direction opposite of the published chart
Course to Fix Flight Plan Legs (cont.) Examples: Green arrows indicate expected behavior Red line indicates actual FMS path As the FMS sequences LAPRA (due to turn initiation), ABBOT is sequenced immediately, and the FMS follows the Course-to-Fix (CF) that represents the start of the hold and then the next CF leg to complete the pattern Results in an unexpected 360 degree turn
Wrong Turn Due to Incorrect Leg Sequencing SIL D201212000036 All NZ-2000 software Including all IC-615/800/1080 FMS platforms All Primus Epic except: AW139 Lower airspeed does not exhibit issue Reported to Honeywell August 2012 FMS could turn in a direction opposite of the published chart while on a departure or missed approach
Wrong Turn Due to Incorrect Leg Sequencing(cont.) Examples: Blue line indicates actual FMS path The FMS executes the missed approach, and prior to turning outbound on the 270 radial from NKE, the FMS reaches the altitude (4,000 ) and sequences the altitude leg, and immediately sequences the next DF leg, dropping the left turn bit. FMS calculates the best turn to the next waypoint
How to Locate Removed Procedures 1. Locate the top level software part number/nz version 2. Utilize SIL D20101100003 to determine what Items are applicable for the specific software part number Not required to determine removed procedures Provides an overview of why the procedures were removed for a specific item 3. Utilize SIL D201108000053 to determine which database is applicable for the specific part number 4. Access one of the Honeywell database websites to download the removed procedures Charts/Maps users: www.epicinds.com All others: www.honeywellaes.com For questions regarding your account, contact one of the following: Charts/Maps Users: INDSaccountservices@jeppesen.com All others: AIS.Account.Services@honeywell.com
Locating Top Level System P/N (EB) on Aircraft SILs provide Top Level System P/N in form of EBXXXXXXX-XXXXX Primus Apex/Primus Epic use Top Level System Part Numbers SILs identify applicable aircraft by Top Level System P/N NZ-2000/IC-615/IC-800 utilize hardware part numbers For copies of these Honeywell publications, go to www.honeywell.com/aero/alert
Locating Top Level System P/N (EB) on EPIC Top Level System P/N identified by EBXXXXXXX-XXXXX Found on System Configuration Management Software Page (SCMS) SCMS page 1 contains Top Level System P/N (EB) on MFD ***Hawker 4000 displayed as example*** For copies of these Honeywell publications, go to www.honeywell.com/aero/alert
Locating NZ Version for FMZ-2000 1.Select NAV button 2.Select NEXT button 3.Select the line select key next to IDENT
Locating Which Items Apply
Locating Which Items Apply (cont.)
Determine Database ID Pub number D201108000053 Provides a reference table that defines which navigation database is applicable to a specific configuration for Primus Epic equipped aircraft Defines the most restricted database for each aircraft configuration Required for mixed fleet operations, most restricted
How to Find Removed Procedures To find a list of removed procedures from your navigation database (reason for removal can be found in SIL D201011000003): Epic INDS (Charts users) 1. Go to www.epicinds.com (login not required) 2. Select Flight Info drop down and select Content/Procedures 3. Select the appropriate NavDB CD 4. Using the NavDB column to find the applicable aircraft configuration, select the link under the Removed Procedures column If you do not know the database ident or the aircraft type is not listed, reference SIL D201108000053 to determine the correct ident for your aircraft configuration Tailored database information is only available after login 5. This will bring up an excel spreadsheet that is all of the removed procedures from your NavDB
How to Find Removed Procedures (cont.) Epic INDS Demonstration of searching for the removed procedures list for Gulfstream G550 (Database ID IN5) Note that the www.epicinds.com website has been modified significantly
How to Find Removed Procedures (cont.) Epic INDS Demonstration of searching for the removed procedures list for Gulfstream G450 (Database ID IN7)
How to Find Removed Procedures (cont.) Epic INDS Demonstration of searching for the removed procedures list for Gulfstream G450 (Database ID IN7)
How to Find Removed Procedures (cont.) Epic INDS Demonstration of searching for the removed procedures list for Gulfstream G450 (Database ID IN7)
How to Find Removed Procedures (cont.) Epic INDS Demonstration of searching for the removed procedures list for Gulfstream G450 (Database ID IN7)
How to Find Removed Procedures (cont.) Epic INDS Demonstration of searching for the removed procedures list for Gulfstream G450 (Database ID IN7)
How to Find Removed Procedures (cont.) Epic INDS Demonstration of searching for the removed procedures list for Gulfstream G450 (Database ID IN7)
How to Find Removed Procedures (cont.) Epic INDS Demonstration of searching for the removed procedures list for Gulfstream G450 (Database ID IN7)
How to Find Removed Procedures (cont.) Non-INDS/Standard EPIC 1. Go to http://www.honeywellaes.com (login not required) 2. Select Flight Info drop down and select Content/Procedures 3. Enter in the applicable Nav DB ID in the Database ID box and select search If you do not know the database ident, reference SIL D201108000053 to determine the correct ident for your aircraft configuration Tailored database information is only available after login 4. Select the file under the Report column 5. This will bring up an excel spreadsheet that is all of the removed procedures from your NavDB
How to Find Removed Procedures (cont.) Non-INDS/Standard EPIC Demonstration of searching for the removed procedures list for YA4 (Database ID for Embraer, Load 23.1) Use one Method B of the three methods to find Method C Method the removed list First choose a Platform (aircraft)pn Method A C Choose the Top Levelprocedure Software Choose the OEM Choose the Top Level Choose the database IDSoftware PN
In-Service FMS Summary Reduce file size in order for auto chart linking to function correctly. For non-vnav aircraft its emphasized that crews monitor their altitude and vertical profile to ensure restrictions are met. Reference SIL D201011000003 to understand FMS software anomalies. Visit www.honeywellaes.com or www.epicinds.com to obtain current procedure removal list for the applicable navigation database. Login is only required for tailored navigation database users. Upcoming certifications will address the known issues for FMS EPIC operators. Consult with the applicable aircraft OEM for dates Upcoming FMZ6.1 software loads will address all known issues.