Page1 SCHEME OF INSTRUCTION AND EVALUATION I - VIII SEMTER OF B.TECH. DEGREE PROGRAMME Code Course Name Branch-Aeronautical First Year First Semester University BS Mathematics-I - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Programming in c 2 2 50 English Communication 3-0 2 100 50 2 1 50 Skill Workshop/ Drawing 4 2 100 Total 16 18 600 300 18 7 300 Total : 1200 Total s: 25 Code Course Name week Second Semester University marks BS Mathematics-II - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Data Structure Using C Business communication Workshop/ Drawing 3-1 3 100 50 2 2 50 3-0 2 100 50 2 1 50 4 2 100 MC NSS/NCC - - - - Total 17 18 600 300 14 7 300 Total : 1200 Total s: 25
Page2 Code Course Name PC Fluid Mechanics & Heat flow Second Year Third Semester University PC Aero Thermodynamics PC Strength of Materials PC Elements of Aeronautics PC Avionics 2-1 3 100 50 Economics/ Organizational Behavior Total 19 19 600 300 8 4 200 Total : 1100 Total s: 23 Code Course Name Purely Applied Mathematics for Specific Branch of Fourth Semester University PC Aerodynamics-I PC Aircraft Materials & Production PC Aircraft Structures-I PC Propulsion-I Economics/ 2-1 3 100 50 Organizational Behavior *Skill Project and Hands on 6 3 100 Total 18 18 600 300 14 7 300 Total : 1200 Total s: 25 *College should conduct at least one NSDC program under this category.
Page3 Code Course Name Third Year Fifth Semester University PC Aircraft Structures-II PC Aerodyanmics-II PC Aircraft Performance OE Finite Element Method/Experimental stress Analysis/Computational fluid Dynamics Total Quality Management/Production Management/Operational Research PC Advance Lab-I 8 4 200 Total 17 17 500 250 14 7 350 Total : 1100 Total s: 24 Sixth Semester Code Course Name University PC Aircraft Stability & Control PC Propulsion-II MC & GS Composite Material & Structure/Non- Destructive Testing/High Temperature Materials Aircraft General & Maintenance/Flight Schedule & Operation/Airport Planning &Management Environmental Science & OE Industrial Lecture # 3 1 50 Presentation Skill & Skill 2-0 1 50 4 2 100
Page4 for Interview # # MC Yoga 2 1 50 Total 19 18 500 300 13 7 300 Total : 1100 Total s: 24 # To be conducted by the Training & Placement department by inviting experts from the industry. No academician to be called. Record may be asked by the University for verification. to be done by the TPO. # # To be conducted by the Training & Placement department of the College. Code Course Name GS Nano Science & Bio Technology Wind Tunnel Techniques/Experimental Fluid Dynamics/Industrial Aerodynamics Combustion/Space Mechanics/Helicopter OE Soft Computing */ Other subjects Final Year Seventh Semester University PC Advance Lab-II/ Project 8 4 200 8 4 200 Projects on Internet of Things Total 16 16 400 200 16 8 400 Total : 1000 Total s: 24 *Student can choose from any department but subject must be running in that semester.
Page5 Code Course Name Industrial Training cum Project/ Entrepreneurship Training cum Project / Stratup Training cum Project Eighth Semester Training cum Project Total 30 20 1000 by the Industry / Training Organisation by the Institute (Report & Institute Viva) Scheme Total 30 20 1000 1000 Total :1000 Total s:20 500 500 Note- Minimum Pass Mark from Industry is 300 (i.e. 60%). Distribution of Semester wise: Semester First 25 Second 25 Third 23 Fourth 25 Fifth 24 Sixth 24 Seventh 24 Eighth 20 ------------------------------------- Total 190 Scheme Attendance & Class Interaction 05 Assignment 05 Surprise Test 05 Quiz 05 Class Test I & II 30 Total 50 Class Test Time(Hrs.): 1 Pass Mark in is 50% of total marks i.e. 25
Page6 External Scheme University Semester Examination of 3 Hours duration. Pass mark will be 35% which means students have to score 35 out of 100. /Sessional Scheme Pass mark will be 50% which means students have to score 25 out of 50. Scheme Attendance & Daily Performance -10 Lab Record - 10 Lab Quiz - 05 Final Experiments & Viva 25 ------------------------------------------------------- Total=50 All Lab examinations are to be completed one week before the end semester examination and marks are to be displayed on the college notice board.
Page7 SCHEME OF INSTRUCTION AND EVALUATION I - VIII SEMTER OF B.TECH. DEGREE PROGRAMME Code Course Name Branch-Automobile First Year First Semester University BS Mathematics-I - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Programming in c 2 2 50 English Communication 3-0 2 100 50 2 1 50 Skill Workshop/ Drawing 4 2 100 Total 16 18 600 300 18 7 300 Total : 1200 Total s: 25 Code Course Name Second Semester University marks BS Mathematics-II - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Data Structure Using C Business communication Workshop/ Drawing 3-1 3 100 50 2 2 50 3-0 2 100 50 2 1 50 4 2 100 MC NSS/NCC - - - - Total 17 18 600 300 14 7 300 Total : 1200 Total s: 25
Page8 Code Course Name Second Year Third Semester University PC Mechanics of Solid PC PC PC PC Introduction to Physical Metallurgy &Engg Materials Fluid Mechanics & Machinery Automotive Thermodynamics Basic Manufacturing Processes Economics/ Organizational Behavior 2 1 50 2-1 3 100 50 Total 19 19 600 300 8 4 200 Total : 1100 Total s: 23 Code Course Name week Purely Applied Mathematics for Specific Branch of Fourth Semester University PC Automotive Engines PC Automotive Chassis PC Kinematics & Dynamics PC of Machines Automotive Transmission systems Economics/ Organizational Behavior *Skill Project and Hands on 2-1 3 100 50 6 3 100 Total 18 18 600 300 14 7 300 Total : 1200 Total s: 25
Page9 *College should conduct at least one NSDC program under this category. Third Year Fifth Semester Code Course Name University PC Design of Machine Components PC Vehicle Body Engg. PC Mechanism & Machines OE Two & Three Wheelers/Automotive Test Instrumentation/Advan ced Production Process for Automotive Components Energy Conversation Techniques/Marketing Management/C++ & Object Oriented Programming/Internet & Web Technology/Analog & Digital Electronics/Digital Signal Processing/Microproces sors PC Advance Lab-I 8 4 200 Total 17 17 500 250 14 7 350 Total : 1100 Total s: 24 Code Course Name Sixth Semester University PC Vehicle Dynamics PC Vehicle Design Automotive Electrical &Electronics/Conversio n Thermodynamics &
Page10 MC & GS Heat Transfer/Automotive Air Conditioning Automotive Pollution & Control/Automotive Safety/Fluid Power & Control Environmental Science & OE Industrial Lecture # 3 1 50 Presentation Skill & 2-0 1 50 4 2 100 Skill for Interview # # MC Yoga 2 1 50 Total 19 18 500 300 13 7 300 Total : 1100 Total s: 24 # To be conducted by the Training & Placement department by inviting experts from the industry. No academician to be called. Record may be asked by the University for verification. to be done by the TPO. # # To be conducted by the Training & Placement department of the College. Code Course Name GS Nano Science & Bio Technology Sensor & Transducers/CAD & CAM/Noise,Vibration & Harshness Trouble Shooting Servicing & Maintenance of Automobile/Simulation, Modelling & Control/Fuels & Lubricants OE Soft Computing */ Other subjects Final Year Seventh Semester University PC Advance Lab-II/ Project 8 4 200 Projects on Internet of Things 8 4 200
Page11 Total 16 16 400 200 16 8 400 Total : 1000 Total s: 24 *Student can choose from any department but subject must be running in that semester. Code Course Name Industrial Training cum Project/ Entrepreneurship Training cum Project / Stratup Training cum Project Eighth Semester Training cum Project Total 30 20 1000 by the Industry / Training Organisation Scheme by the Institute (Report & Institute Viva) Total 30 20 1000 1000 Total :1000 Total s:20 500 500 Note- Minimum Pass Mark from Industry is 300 (i.e. 60%). Distribution of Semester wise: Semester First 25 Second 25 Third 23 Fourth 25 Fifth 24 Sixth 24 Seventh 24 Eighth 20 ------------------------------------- Total 190
Page12 Scheme Attendance & Class Interaction 05 Assignment 05 Surprise Test 05 Quiz 05 Class Test I & II 30 Total 50 Class Test Time(Hrs.): 1 Pass Mark in is 50% of total marks i.e. 25 External Scheme University Semester Examination of 3 Hours duration. Pass mark will be 35% which means students have to score 35 out of 100. /Sessional Scheme Pass mark will be 50% which means students have to score 25 out of 50. Scheme Attendance & Daily Performance -10 Lab Record - 10 Lab Quiz - 05 Final Experiments & Viva 25 ------------------------------------------------------- Total=50 All Lab examinations are to be completed one week before the end semester examination and marks are to be displayed on the college notice board.
Page13 SCHEME OF INSTRUCTION AND EVALUATION I - VIII SEMTER OF B.TECH. DEGREE PROGRAMME Code Course Name Branch-Biomedical First Year First Semester University BS Mathematics-I - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Programming in c 2 2 50 English Communication 3-0 2 100 50 2 1 50 Skill Workshop/ Drawing 4 2 100 Total 16 18 600 300 18 7 300 Total : 1200 Total s: 25 Code Course Name week Second Semester University marks BS Mathematics-II - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Data Structure Using C Business communication Workshop/ Drawing 3-1 3 100 50 2 2 50 3-0 2 100 50 2 1 50 4 2 100 MC NSS/NCC - - - - Total 17 18 600 300 14 7 300 Total : 1200 Total s: 25
Page14 Code Course Name Second Year Third Semester University PC Human Anatomy PC Network PC Analog Electronics Circuit PC Physiology PC Basic Clinical Sciences 2-1 3 100 50 Economics/ Organizational Behavior Total 19 19 600 300 8 4 200 Total : 1100 Total s: 23 Code Course Name week Purely Applied Mathematics for Specific Branch of PC Biochemistry & Biophysics PC Digital Electronics Circuit Fourth Semester University PC Medical Infomatics PC Databased Management System Economics/ Organizational Behavior *Skill Project and Hands on 2-1 3 100 50 6 3 100 Total 18 18 600 300 14 7 300 Total : 1200 Total s: 25 *College should conduct at least one NSDC program under this category.
Page15 Third Year Fifth Semester Code Course Name University PC Biomaterials PC Elements of Biomedical Instrumentation PC Microprocessors OE Transducers & Instrumentations/Digit al Signal Processing/VLSI Design Operative System/Computer Network & Data Communication PC Advance Lab-I 8 4 200 Total 17 17 500 250 14 7 350 Total : 1100 Total s: 24 Sixth Semester Code Course Name University PC Biomedical signal Processing week PC Biomechanics MC & GS Computer Graphics/Communicati on Engg. Biomedical Equipment/LASER &Fibre Optics in Medicine/Telemedicine Environmental Science & OE Industrial Lecture # 3 1 50 Presentation Skill & 2-0 1 50 4 2 100 Skill for Interview # # MC Yoga 2 1 50 Total 19 18 500 300 13 7 300
Page16 Total : 1100 Total s: 24 # To be conducted by the Training & Placement department by inviting experts from the industry. No academician to be called. Record may be asked by the University for verification. to be done by the TPO. # # To be conducted by the Training & Placement department of the College. Code Course Name GS Nano Science & Bio Technology Medical Imaging Techniques/Artificial Organs & RehabilitationEngg./Phy siological System Modelling Hospital Management/Bioethics /Biostatistics OE Soft Computing */ Other subjects Final Year Seventh Semester University PC Advance Lab-II/ Project 8 4 200 Projects on Internet of Things 8 4 200 Total 16 16 400 200 16 8 400 Total : 1000 Total s: 24 *Student can choose from any department but subject must be running in that semester.
Page17 Code Course Name Industrial Training cum Project/ Entrepreneurship Training cum Project / Stratup Training cum Project Eighth Semester Training cum Project Total 30 20 1000 by the Industry / Training Organisation Scheme by the Institute (Report & Institute Viva) Total 30 20 1000 1000 Total :1000 Total s:20 500 500 Note- Minimum Pass Mark from Industry is 300 (i.e. 60%). Distribution of Semester wise: Semester First 25 Second 25 Third 23 Fourth 25 Fifth 24 Sixth 24 Seventh 24 Eighth 20 ------------------------------------- Total 190 Scheme Attendance & Class Interaction 05 Assignment 05 Surprise Test 05 Quiz 05 Class Test I & II 30 Total 50 Class Test Time(Hrs.): 1
Page18 Pass Mark in is 50% of total marks i.e. 25 External Scheme University Semester Examination of 3 Hours duration. Pass mark will be 35% which means students have to score 35 out of 100. /Sessional Scheme Pass mark will be 50% which means students have to score 25 out of 50. Scheme Attendance & Daily Performance -10 Lab Record - 10 Lab Quiz - 05 Final Experiments & Viva 25 ------------------------------------------------------- Total=50 All Lab examinations are to be completed one week before the end semester examination and marks are to be displayed on the college notice board.
Page19 SCHEME OF INSTRUCTION AND EVALUATION I - VIII SEMTER OF B.TECH. DEGREE PROGRAMME Code Course Name Branch-Biotechnology First Year First Semester University BS Mathematics-I - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Programming in c 2 2 50 English Communication 3-0 2 100 50 2 1 50 Skill Workshop/ Drawing 4 2 100 Total 16 18 600 300 18 7 300 Total : 1200 Total s: 25 Code Course Name week Second Semester University marks BS Mathematics-II - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Data Structure Using C Business communication Workshop/ Drawing 3-1 3 100 50 2 2 50 3-0 2 100 50 2 1 50 4 2 100 MC NSS/NCC - - - - Total 17 18 600 300 14 7 300 Total : 1200 Total s: 25
Page20 Code Course Name week Second Year Third Semester University PC Biochemistry PC Cell Biology PC Biostatistics PC Microbiology PC Upstream Process.-I Economics/ Organizational Behavior 2-1 3 100 50 Total 19 19 600 300 8 4 200 Total : 1100 Total s: 23 Code Course Name week Purely Applied Mathematics for Specific Branch of Fourth Semester University PC Molecular Biology PC Upstream Process.-II PC Bioinstrumentation PC Biochemical Reaction Economics/ Organizational Behavior *Skill Project and Hands on 2-1 3 100 50 6 3 100 Total 18 18 600 300 14 7 300 Total : 1200 Total s: 25 *College should conduct at least one NSDC program under this category.
Page21 Third Year Fifth Semester Code Course Name University PC Genetic PC Plant & Animal PC OE Biotechnology Industrial Microbiology & Enzyme Technology Immunology &Immunotechnology DBMS/Process Instrumentation PC Advance Lab-I 8 4 200 Total 17 17 500 250 14 7 350 Total : 1100 Total s: 24 Sixth Semester Code Course Name University PC Bioreactor Design & Analysis PC Bioinfomatics MC & GS Stem Cell Engg./ Molecular Modelling & Drug Designing Biomaterials/Nanobiote chnology Environmental Science & OE Industrial Lecture # 3 1 50 Presentation Skill & 2-0 1 50 4 2 100 Skill for Interview # # MC Yoga 2 1 50 Total 19 18 500 300 13 7 300 Total : 1100 Total s: 24
Page22 # To be conducted by the Training & Placement department by inviting experts from the industry. No academician to be called. Record may be asked by the University for verification. to be done by the TPO. # # To be conducted by the Training & Placement department of the College. Code Course Name GS Nano Science & Bio Technology Environmental Biotechnology Medical & Pharmaceutical Biotechnology OE Soft Computing */ Other subjects Final Year Seventh Semester University PC Advance Lab-II/ Project 8 4 200 Projects on Internet of Things 8 4 200 Total 16 16 400 200 16 8 400 Total : 1000 Total s: 24 *Student can choose from any department but subject must be running in that semester. Code Course Name week Industrial Training cum Project/ Entrepreneurship Training cum Project / Stratup Training cum Project Eighth Semester Training cum Project Total 30 20 1000 by the Industry / Training Organisation by the Institute (Report & Institute Viva) Scheme 500 500
Page23 Total 30 20 1000 1000 Total :1000 Total s:20 Note- Minimum Pass Mark from Industry is 300 (i.e. 60%). Distribution of Semester wise: Semester First 25 Second 25 Third 23 Fourth 25 Fifth 24 Sixth 24 Seventh 24 Eighth 20 ------------------------------------- Total 190 Scheme Attendance & Class Interaction 05 Assignment 05 Surprise Test 05 Quiz 05 Class Test I & II 30 Total 50 Class Test Time(Hrs.): 1 Pass Mark in is 50% of total marks i.e. 25 External Scheme University Semester Examination of 3 Hours duration. Pass mark will be 35% which means students have to score 35 out of 100. /Sessional Scheme
Page24 Pass mark will be 50% which means students have to score 25 out of 50. Scheme Attendance & Daily Performance -10 Lab Record - 10 Lab Quiz - 05 Final Experiments & Viva 25 ------------------------------------------------------- Total=50 All Lab examinations are to be completed one week before the end semester examination and marks are to be displayed on the college notice board.
Page25 SCHEME OF INSTRUCTION AND EVALUATION I - VIII SEMTER OF B.TECH. DEGREE PROGRAMME Code Course Name Branch-Chemical First Year First Semester University BS Mathematics-I - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Programming in c 2 2 50 English Communication 3-0 2 100 50 2 1 50 Skill Workshop/ Drawing 4 2 100 Total 16 18 600 300 18 7 300 Total : 1200 Total s: 25 Code Course Name week Second Semester University marks BS Mathematics-II - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Data Structure Using C Business communication Workshop/ Drawing 3-1 3 100 50 2 2 50 3-0 2 100 50 2 1 50 4 2 100 MC NSS/NCC - - - - Total 17 18 600 300 14 7 300 Total : 1200 Total s: 25
Page26 Code Course Name week PC Fluid Flow & Flow Measurement Second Year Third Semester University PC Chemical Technology PC Mechanical Operation PC Mass Transfer-I PC Chemical Process 2-1 3 100 50 Economics/ Organizational Behavior Total 19 19 600 300 8 4 200 Total : 1100 Total s: 23 Laboratories : 1. Fluid Flow Lab 2.Chemical Technology Lab 3. Mechanical Operations Lab 4. Mass Transfer-I Lab Code Course Name week Purely Applied Mathematics for Specific Branch of Fourth Semester University PC Mass Transfer-II PC Heat Transfer PC Chemical Engg. PC Thermodynamics Fuel & Energyy Technology Economics/ Organizational Behavior *Skill Project and Hands on 2-1 3 100 50 6 3 100 Total 18 18 600 300 14 7 300 Total : 1200 Total s: 25
Page27 *College should conduct at least one NSDC program under this category. Laboratories : 1. Mass Transfer-II Lab 2.Heat Transfer Lab 4. Process Instrumentation Lab 4. Fuel Technology Cod e Course Name wee k Third Year Fifth Semester Theor y Universit y Evaluatio n wee k Practica l PC Transport Phenomena PC Process Equipment PC OE Design Chemical Reaction Engg. Process Instrumentaion/Proces s Simulation & Modelling Biotechnology/Food Biotechnology PC Advance Lab-I 8 4 200 Total 17 17 500 250 14 7 350 Total : 1100 Total s: 24 Laboratories : 1. Biotechnology Lab 2.Process Equipment Design Lab 3. Chemical Reaction Lab 4. Advanced Chemical Engg. Lab-I Mark s Sixth Semester Code Course Name week University week PC Numerical Methods
Page28 PC MC & GS & MATLAB Process Dynamics & Control Fundamentals of Biochemical Engg./Fluidization Engg. Polymer Technogy/separation Technology Environmental Science & OE Industrial Lecture # 3 1 50 2-0 1 50 4 2 100 Presentation Skill & Skill for Interview # # MC Yoga 2 1 50 Total 19 18 500 300 13 6 300 Total : 1100 Total s: 24 # To be conducted by the Training & Placement department by inviting experts from the industry. No academician to be called. Record may be asked by the University for verification. to be done by the TPO. # # To be conducted by the Training & Placement department of the College. Laboratories : 1. CAD Lab 2. Project on Internet 3. Process Control Lab Final Year Cod e GS Course Name Nano Science & Bio Technology Pulp & Paper Technology/Petroleu m Refinery Engg./Mineral wee k Seventh Semester Universit Theor y y Evaluatio n wee k Practica l Mark s
Page29 Processing Pinch Technology/Green Technology/Nano- Technology OE Soft Computing */ Other subjects PC Advance Lab-II/ Project Projects on Internet of Things 8 4 200 8 4 200 Total 16 16 400 200 16 8 400 Total : 1000 Total s: 24 *Student can choose from any department but subject must be running in that semester. Laboratory: 1. Soft Computing Lab Eighth Semester Training cum Project Code Course Name week Total Industrial Training cum Project/ Entrepreneurship Training cum Project / Stratup Training cum Project 30 20 1000 by the Industry / Training Organisation Scheme by the Institute (Report & Institute Viva) Total 30 20 1000 1000 Total :1000 Total s:20 Laboratories : 1. Soft Computing Lab 500 500 Note- Minimum Pass Mark from Industry is 300 (i.e. 60%). Distribution of Semester wise:
Page30 Semester First 25 Second 25 Third 23 Fourth 25 Fifth 24 Sixth 24 Seventh 24 Eighth 20 ------------------------------------- Total 190 Scheme Attendance & Class Interaction 05 Assignment 05 Surprise Test 05 Quiz 05 Class Test I & II 30 Total 50 Class Test Time(Hrs.): 1 Pass Mark in is 50% of total marks i.e. 25 External Scheme University Semester Examination of 3 Hours duration. Pass mark will be 35% which means students have to score 35 out of 100. /Sessional Scheme Pass mark will be 50% which means students have to score 25 out of 50. Scheme Attendance & Daily Performance -10 Lab Record - 10 Lab Quiz - 05 Final Experiments & Viva 25 ------------------------------------------------------- Total=50 All Lab examinations are to be completed one week before the end semester examination and marks are to be displayed on the college notice board.
Page31 SCHEME OF INSTRUCTION AND EVALUATION I - VIII SEMTER OF B.TECH. DEGREE PROGRAMME Code Course Name Branch-Civil First Year First Semester University BS Mathematics-I - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Programming in c 2 2 50 English Communication 3-0 2 100 50 2 1 50 Skill Workshop/ Drawing 4 2 100 Total 16 18 600 300 18 7 300 Total : 1200 Total s: 25 Code Course Name week Second Semester University marks BS Mathematics-II - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Data Structure Using C Business communication Workshop/ Drawing 3-1 3 100 50 2 2 50 3-0 2 100 50 2 1 50 4 2 100 MC NSS/NCC - - - - Total 17 18 600 300 14 7 300 Total : 1200 Total s: 25
Page32 Code Course Name week Second Year Third Semester University PC Mechanics of Solid PC Fluid Mechanics & Hydraulics Machines PC Survey PC Geotechnical PC Construction Technology Economics/ Organizational Behavior 2-1 3 100 50 PC Building Drawing 2 1 50 Total 19 19 600 300 8 4 200 Total : 1100 Total s: 23 Code Course Name week Purely Applied Mathematics for Specific Branch of Fourth Semester University PC Structural Analysis-I PC Advanced Mechanics of PC PC Solids Highway & Traffic Design of Concrete Structure Economics/ Organizational Behavior 2-1 3 100 50 PC Material Testing Lab 2 1 50 6 3 100 *Skill Project and Hands on Total 18 18 600 300 14 7 300 Total : 1200 Total s: 25
Page33 *College should conduct at least one NSDC program under this category. Third Year Fifth Semester Code Course Name week University week PC Structural PC PC Analysis-II Design of Steel Structures Water Supply & Sanitary Engg. Water Resource Engg./ Ground Water Hydrology/Open Channel Flow OE PC Advance Lab- I(Structural Engg. Lab /Advanced Geotechnical Lab) 8 4 200 Total 17 17 500 250 14 7 350 Total : 1100 Total s: 24 For Honours and Minor Sixth Semester Code Course Name week University week PC Foundation Engg. PC Irrigation Engg. MC & GS Advanced Transportation Engg./ Pavement Design / Mass Transit System Structural Dynamics/ FEM/Prestressed Concrete Environmental Science &
Page34 OE Industrial Lecture # Presentation Skill & Skill for Interview # # 3 1 50 2-0 1 50 4 2 100 MC Yoga 2 1 50 Total 19 18 500 300 13 6 300 Total : 1100 Total s: 24 For Honours and Minor # To be conducted by the Training & Placement department by inviting experts from the industry. No academician to be called. Record may be asked by the University for verification. to be done by the TPO. # # To be conducted by the Training & Placement department of the College. Final Year Seventh Semester Code Course Name week University GS Nano Science & OE PC Bio Technology Architecture & Town planning / Ground improvement Technique/ Soil Dynamics & Machine Foundation Environmental Impact Assessment/ Industrial Waste Management & Disposal / Quality Surveying & Estimating Soft Computing */ Other subjects Advance Lab-II/ Project week 8 4 200 Projects on Internet of Things 8 4 200 Total 16 16 400 200 16 8 400 Total : 1000 Total s: 24
Page35 For Honours and Minor *Student can choose from any department but subject must be running in that semester. Eighth Semester Training cum Project Code Course Name week Total Industrial Training cum Project/ Entrepreneurship Training cum Project / Stratup Training cum Project 30 20 1000 by the Industry / Training Organisation Scheme by the Institute (Report & Institute Viva) Total 30 20 1000 1000 Total :1000 Total s:20 500 500 Note- Minimum Pass Mark from Industry is 300 (i.e. 60%). Distribution of Semester wise: Semester First 25 Second 25 Third 23 Fourth 25 Fifth 24 Sixth 24 Seventh 24 Eighth 20 ------------------------------------- Total 190 Scheme Attendance & Class Interaction 05 Assignment 05
Page36 Surprise Test 05 Quiz 05 Class Test I & II 30 Total 50 Class Test Time(Hrs.): 1 Pass Mark in is 50% of total marks i.e. 25 External Scheme University Semester Examination of 3 Hours duration. Pass mark will be 35% which means students have to score 35 out of 100. /Sessional Scheme Pass mark will be 50% which means students have to score 25 out of 50. Scheme Attendance & Daily Performance -10 Lab Record - 10 Lab Quiz - 05 Final Experiments & Viva 25 ------------------------------------------------------- Total=50 All Lab examinations are to be completed one week before the end semester examination and marks are to be displayed on the college notice board.
Page37 SCHEME OF INSTRUCTION AND EVALUATION I - VIII SEMTER OF B.TECH. DEGREE PROGRAMME Code Course Name Branch-Computer Science & First Year First Semester University BS Mathematics-I - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Programming in c 2 2 50 English Communication 3-0 2 100 50 2 1 50 Skill Workshop/ Drawing 4 2 100 Total 16 18 600 300 18 7 300 Total : 1200 Total s: 25 Code Course Name week Second Semester University marks BS Mathematics-II - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Data Structure Using C Business communication Workshop/ Drawing 3-1 3 100 50 2 2 50 3-0 2 100 50 2 1 50 4 2 100 MC NSS/NCC - - - - Total 17 18 600 300 14 7 300 Total : 1200 Total s: 25
Page38 Code Course Name week PC Switching & Logic Design PC Object Oriented Programming using JAVA PC Introduction to 3D Technology Second Year Third Semester University PC Software Engg. PC Discrete Structures 2-1 3 100 50 Economics/ Organizational Behavior Total 19 19 600 300 8 4 200 Total : 1100 Total s: 23 Code Course Name week Purely Applied Mathematics for Specific Branch of PC Computer Organization & Architecture PC Design & Analysis of Algorithms Fourth Semester University PC Database System PC Formal Language & Automata Economics/ Organizational Behavior *Skill Project and Hands on 2-1 3 100 50 6 3 100 Total 18 18 600 300 14 7 300 Total : 1200 Total s: 25
Page39 *College should conduct at least one NSDC program under this category. Third Year Fifth Semester Code Course Name week University week PC Operating System PC Computer PC OE Graphics Advanced Computer Architecture Advanced JAVA Programming/ Internet of Things/Software Testing/Parallel Algorithms Cloud Computing/ Datamining & Data Warehousing/ Computer Design /Information Retrieval 2 1 50 PC Advance Lab-I 8 4 200 Total 17 17 500 250 14 7 350 Total : 1100 Total s: 24 For Honours and Minor Sixth Semester Code Course Name week University week PC Computer Network & Data Communication PC Compiler Design Digital Image Processing/Digital Signal Processing/Neural language
Page40 MC & GS Processing/Wireless Sensor Networks Internet & Web Technology/Pattern Recognition/Machine Learning/Advanced Operating System Environmental Science & OE Industrial Lecture # 3 1 50 2-0 1 50 4 2 100 Presentation Skill & Skill for Interview # # MC Yoga 2 1 50 Total 19 18 500 300 13 6 300 Total : 1100 Total s: 24 # To be conducted by the Training & Placement department by inviting experts from the industry. No academician to be called. Record may be asked by the University for verification. to be done by the TPO. # # To be conducted by the Training & Placement department of the College. Final Year Seventh Semester Code Course Name week University GS Nano Science & Bio Technology Cryptography & Network Security/Robotics/ VLSI Design/Social Networks Mobile Computing/Software Project Management/ Algorithm for Bioinformatics/Expert Systems OE Soft Computing */ Other subjects PC Advance Lab-II/ Project week 8 4 200
Page41 Projects on Internet of Things 8 4 200 Total 16 16 400 200 16 8 400 Total : 1000 Total s: 24 *Student can choose from any department but subject must be running in that semester. Eighth Semester Training cum Project Code Course Name week Total Industrial Training cum Project/ Entrepreneurship Training cum Project / Stratup Training cum Project 30 20 1000 by the Industry / Training Organisation Scheme by the Institute (Report & Institute Viva) Total 30 20 1000 1000 Total :1000 Total s:20 500 500 Note- Minimum Pass Mark from Industry is 300 (i.e. 60%). Distribution of Semester wise: Semester First 25 Second 25 Third 23 Fourth 25 Fifth 24 Sixth 24 Seventh 24 Eighth 20 ------------------------------------- Total 190
Page42 Scheme Attendance & Class Interaction 05 Assignment 05 Surprise Test 05 Quiz 05 Class Test I & II 30 Total 50 Class Test Time(Hrs.): 1 Pass Mark in is 50% of total marks i.e. 25 External Scheme University Semester Examination of 3 Hours duration. Pass mark will be 35% which means students have to score 35 out of 100. /Sessional Scheme Pass mark will be 50% which means students have to score 25 out of 50. Scheme Attendance & Daily Performance -10 Lab Record - 10 Lab Quiz - 05 Final Experiments & Viva 25 ------------------------------------------------------- Total=50 All Lab examinations are to be completed one week before the end semester examination and marks are to be displayed on the college notice board.
Page43 SCHEME OF INSTRUCTION AND EVALUATION I - VIII SEMTER OF B.TECH. DEGREE PROGRAMME Code Course Name Branch-Electrical & Electronics First Year First Semester University BS Mathematics-I - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Programming in c 2 2 50 English Communication 3-0 2 100 50 2 1 50 Skill Workshop/ Drawing 4 2 100 Total 16 18 600 300 18 7 300 Total : 1200 Total s: 25 Code Course Name week Second Semester University marks BS Mathematics-II - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Data Structure Using C Business communication Workshop/ Drawing 3-1 3 100 50 2 2 50 3-0 2 100 50 2 1 50 4 2 100 MC NSS/NCC - - - - Total 17 18 600 300 14 7 300 Total : 1200 Total s: 25
Page44 Code Course Name week Second Year Third Semester University PC Network PC Analog Electronics Circuit PC Electrical Machines-I PC Electrical & Electronics Measurement PC Electromagnetic 2-1 3 100 50 Economics/ Organizational Behavior Total 19 19 600 300 8 4 200 Total : 1100 Total s: 23 Code Course Name week Purely Applied Mathematics for Specific Branch of Fourth Semester University PC Electrical Machines-II PC Control Systems Engg-I PC Digital Electronics PC Circuit Electrical Power Transmission & Distribution Economics/ Organizational Behavior *Skill Project and Hands on 2-1 3 100 50 6 3 100 Total 18 18 600 300 14 7 300 Total : 1200 Total s: 25
Page45 *College should conduct at least one NSDC program under this category. Third Year Fifth Semester Code Course Name week University week PC Power Electronics PC Microprocessor & PC OE PC Microcontroller Digital Signal Processing Renewable Energy System/Advanced Electronics Circuit Optimization in Engg. Advance Lab- I(Advanced Circuit Simulation Lab-I) 8 4 200 Total 17 17 500 250 14 7 350 Total : 1100 Total s: 24 For Honours and Minor Cod e Course Name Sixth Semester wee Universit k Theor y y Evaluatio n wee k Practica l PC Communication Engg. PC Power System Operation & Control Robotics & Robot Applications/Optoelectroni cs Devices & Instrumentation/Electrical Drives Industrial Automation & Control VLSI Design/Flexible AC Transmission systems/advanced Communication Systems MC Environmental Science & Mark s
Page46 & GS OE Industrial Lecture # 3 1 50 Presentation Skill & Skill 2-0 1 50 4 2 100 for Interview # # MC Yoga 2 1 50 Total 19 18 500 300 13 6 300 Total : 1100 Total s: 24 # To be conducted by the Training & Placement department by inviting experts from the industry. No academician to be called. Record may be asked by the University for verification. to be done by the TPO. # # To be conducted by the Training & Placement department of the College. Cod e GS OE Course Name Nano Science & Bio Technology Control System Engg- II/Advanced Power Electronics/Digital Image Processing Mobile Communication/Adaptive Signal Processing/Mechatronics/Swi tch Gear & Protective Devices Soft Computing */ Other subjects Final Year Seventh Semester wee Universit k Theor y y Evaluatio n wee k Practic al PC Advance Lab-II/ Project 8 4 200 Projects on Internet of Things 8 4 200 Total 16 16 400 200 16 8 400 Total : 1000 Total s: 24 Mark s *Student can choose from any department but subject must be running in that semester.
Page47 Eighth Semester Training cum Project Code Course Name week Total Industrial Training cum Project/ Entrepreneurship Training cum Project / Stratup Training cum Project 30 20 1000 by the Industry / Training Organisation Scheme by the Institute (Report & Institute Viva) Total 30 20 1000 1000 Total :1000 Total s:20 500 500 Note- Minimum Pass Mark from Industry is 300 (i.e. 60%). Distribution of Semester wise: Semester First 25 Second 25 Third 23 Fourth 25 Fifth 24 Sixth 24 Seventh 24 Eighth 20 ------------------------------------- Total 190 Scheme Attendance & Class Interaction 05 Assignment 05 Surprise Test 05 Quiz 05 Class Test I & II 30 Total 50 Class Test Time(Hrs.): 1
Page48 Pass Mark in is 50% of total marks i.e. 25 External Scheme University Semester Examination of 3 Hours duration. Pass mark will be 35% which means students have to score 35 out of 100. /Sessional Scheme Pass mark will be 50% which means students have to score 25 out of 50. Scheme Attendance & Daily Performance -10 Lab Record - 10 Lab Quiz - 05 Final Experiments & Viva 25 ------------------------------------------------------- Total=50 All Lab examinations are to be completed one week before the end semester examination and marks are to be displayed on the college notice board.
Page49 SCHEME OF INSTRUCTION AND EVALUATION I - VIII SEMTER OF B.TECH. DEGREE PROGRAMME Code Course Name Branch-Electrical First Year First Semester University BS Mathematics-I - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Programming in c 2 2 50 English Communication 3-0 2 100 50 2 1 50 Skill Workshop/ Drawing 4 2 100 Total 16 18 600 300 18 7 300 Total : 1200 Total s: 25 Code Course Name week Second Semester University marks BS Mathematics-II - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Data Structure Using C Business communication Workshop/ Drawing 3-1 3 100 50 2 2 50 3-0 2 100 50 2 1 50 4 2 100 MC NSS/NCC - - - - Total 17 18 600 300 14 7 300 Total : 1200 Total s: 25
Page50 Code Course Name week Second Year Third Semester University PC Network PC Analog Electronics Circuit PC Electrical Machines I PC Electrical & Electronics Measurement PC Electromagnetic 2-1 3 100 50 Economics/ Organizational Behavior Total 19 19 600 300 8 4 200 Total : 1100 Total s: 23 Code Course Name week Purely Applied Mathematics for Specific Branch of Fourth Semester University PC Electrical Machines II PC Control System Engg I PC Digital Electronics PC Circuits Electrical Power Transmission & Distribution Economics/ Organizational Behavior *Skill Project and Hands on 2-1 3 100 50 6 3 100 Total 18 18 600 300 14 7 300 Total : 1200 Total s: 25
Page51 *College should conduct at least one NSDC program under this category. Cod e Course Name Third Year wee k Fifth Semester Theor y Universit y Evaluatio n wee k Practica l PC Power Electronics PC Microprocessor & Microcontroller PC Digital signal Processing Renewable Energy systems/optoelectronic s Device & Instrumentation OE Optimization in Engg. PC Advance Lab- I(Advanced Electrical Computational Lab-I) Mark s 8 4 200 Total 17 17 500 250 14 7 350 Total : 1100 Total s: 24 Sixth Semester Code Course Name week University week PC Electrical Drives PC MC & GS OE Power System & Operation & Control VLSI Design/Generalized of Electrical Machines/HVDC Transmission Control System Engg-II/Advanced Digital Signal Processing Environmental Science & Industrial Lecture # 3 1 50
Page52 Presentation Skill & Skill for Interview # # 2-0 1 50 4 2 100 MC Yoga 2 1 50 Total 19 18 500 300 13 6 300 Total : 1100 Total s: 24 For Honours and Minor # To be conducted by the Training & Placement department by inviting experts from the industry. No academician to be called. Record may be asked by the University for verification. to be done by the TPO. # # To be conducted by the Training & Placement department of the College. Cod e Course Name GS Nano Science & Bio Technology Switch Gear & Protective Devices/Biomedical Instrumentation/Mobil e Communication Communication Engg./Digital Image Processing/adaptive Control OE Soft Computing */ Other subjects wee k Final Year Seventh Semester Universit Theor y y Evaluatio n wee k Practica l PC Advance Lab-II/ Project 8 4 200 Mark s Projects on Internet of Things 8 4 200 Total 16 16 400 200 16 8 400 Total : 1000 Total s: 24 *Student can choose from any department but subject must be running in that semester.
Page53 Eighth Semester Training cum Project Code Course Name week Total Industrial Training cum Project/ Entrepreneurship Training cum Project / Stratup Training cum Project 30 20 1000 by the Industry / Training Organisation Scheme by the Institute (Report & Institute Viva) Total 30 20 1000 1000 Total :1000 Total s:20 500 500 Note- Minimum Pass Mark from Industry is 300 (i.e. 60%). Distribution of Semester wise: Semester First 25 Second 25 Third 23 Fourth 25 Fifth 24 Sixth 24 Seventh 24 Eighth 20 ------------------------------------- Total 190 Scheme Attendance & Class Interaction 05 Assignment 05 Surprise Test 05 Quiz 05 Class Test I & II 30 Total 50 Class Test Time(Hrs.): 1
Page54 Pass Mark in is 50% of total marks i.e. 25 External Scheme University Semester Examination of 3 Hours duration. Pass mark will be 35% which means students have to score 35 out of 100. /Sessional Scheme Pass mark will be 50% which means students have to score 25 out of 50. Scheme Attendance & Daily Performance -10 Lab Record - 10 Lab Quiz - 05 Final Experiments & Viva 25 ------------------------------------------------------- Total=50 All Lab examinations are to be completed one week before the end semester examination and marks are to be displayed on the college notice board.
Page55 SCHEME OF INSTRUCTION AND EVALUATION I - VIII SEMTER OF B.TECH. DEGREE PROGRAMME Branch-Electronics & Telecommunication Code Course Name First Year First Semester University BS Mathematics-I - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Programming in c 2 2 50 English Communication 3-0 2 100 50 2 1 50 Skill Workshop/ Drawing 4 2 100 Total 16 18 600 300 18 7 300 Total : 1200 Total s: 25 Code Course Name week Second Semester University marks BS Mathematics-II - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Data Structure Using C Business communication Workshop/ Drawing 3-1 3 100 50 2 2 50 3-0 2 100 50 2 1 50 4 2 100 MC NSS/NCC - - - - Total 17 18 600 300 14 7 300 Total : 1200 Total s: 25
Page56 Code Course Name week PC Analog Electronics Circuits Second Year Third Semester University PC Network PC Signal & Systems PC Digital Electronics PC Semiconductor Devices 2-1 3 100 50 Economics/ Organizational Behavior Total 19 19 600 300 8 4 200 Total : 1100 Total s: 23 Code Course Name week Purely Applied Mathematics for Specific Branch of Fourth Semester University PC Electromagnetics Engg. PC Electrical Machines & PC PC Power Devices Electrical & Electronics Measurements Microprocessors & Microcontrollers Economics/ Organizational Behavior *Skill Project and Hands on 2-1 3 100 50 6 3 100 Total 18 18 600 300 14 7 300 Total : 1200 Total s: 25 *College should conduct at least one NSDC program under this category.
Page57 Cod e Course Name Third Year Fifth Semester wee Universit k Theor y y Evaluatio n wee k Practica l PC Control Systems PC Digital signal Processing PC Analog Communication OE PC Fiber Optics & Optoelectronics Devices/Computer Architecture & Organization /Power Electronics/Electromagnet ic Interference & Compatibility/Electronic Devises & Modelling/Sensors & Transducers/Object Oriented Programming/Advanced Analog Electronic Circuits JAVA Programming/Digital VLSI Design/Digital System design/brain Computer Interfacing/Optimization in Engg Advance Lab-I(VLSI & Embedded System Lab) Mark s 8 4 200 Total 17 17 500 250 14 7 350 Total : 1100 Total s: 24 Cod e Course Name Sixth Semester wee Universit k Theor y y Evaluatio n wee k Practic al PC Digital Communication PC High Frequency Engg. Information & Coding/Computer Network & Data Communication/Mobile Communication/Biomedical Electronics/Industrial Mark s
Page58 MC & GS Electronics/Robotics & computer Vision/Pattern Analysis & Machine Intelligence/Analog VLSI Design Cryptography & Network Security/Digital Signal Processing/Operation System/Antennas & Wave Propagation/Speech Propagation/Telecommunicat ion System Modelling & Simulation Environmental Science & OE Industrial Lecture # 3 1 50 Presentation Skill & Skill for 2-0 1 50 4 2 100 Interview # # MC Yoga 2 1 50 Total 19 18 500 300 13 6 300 Total : 1100 Total s: 24 # To be conducted by the Training & Placement department by inviting experts from the industry. No academician to be called. Record may be asked by the University for verification. to be done by the TPO. # # To be conducted by the Training & Placement department of the College. Final Year Cod e GS Course Name Nano Science & Bio Technology Wireless Communication Systems/Satellite Communication Systems/Digital Image Processing/Adaptive Signal Processing/Advanced Control Systems/Embedded System Design/Electronics wee k Seventh Semester Universit Theor y y Evaluatio n wee k Practica l Mark s
Page59 Design Automation/Database Management System Wireless Sensor Networks/Optical Communication Networking/System Design Using Integrated Circuits/CMOS based Design/Mobile Computing/Biomedica l Signal Processing OE Soft Computing */ Other subjects PC Advance Lab-II/ Project 8 4 200 Projects on Internet of Things 8 4 200 Total 16 16 400 200 16 8 400 Total : 1000 Total s: 24 *Student can choose from any department but subject must be running in that semester. Eighth Semester Training cum Project Code Course Name week Total Industrial Training cum Project/ Entrepreneurship Training cum Project / Stratup Training cum Project 30 20 1000 by the Industry / Training Organisation Scheme by the Institute (Report & Institute Viva) Total 30 20 1000 1000 Total :1000 Total s:20 500 500 Note- Minimum Pass Mark from Industry is 300 (i.e. 60%).
Page60 Distribution of Semester wise: Semester First 25 Second 25 Third 23 Fourth 25 Fifth 24 Sixth 24 Seventh 24 Eighth 20 ------------------------------------- Total 190 Scheme Attendance & Class Interaction 05 Assignment 05 Surprise Test 05 Quiz 05 Class Test I & II 30 Total 50 Class Test Time(Hrs.): 1 Pass Mark in is 50% of total marks i.e. 25 External Scheme University Semester Examination of 3 Hours duration. Pass mark will be 35% which means students have to score 35 out of 100. /Sessional Scheme Pass mark will be 50% which means students have to score 25 out of 50. Scheme Attendance & Daily Performance -10 Lab Record - 10 Lab Quiz - 05 Final Experiments & Viva 25 ------------------------------------------------------- Total=50
Page61 All Lab examinations are to be completed one week before the end semester examination and marks are to be displayed on the college notice board.
Page62 SCHEME OF INSTRUCTION AND EVALUATION I - VIII SEMTER OF B.TECH. DEGREE PROGRAMME Code Course Name Branch-Fashion & Apparel Technology First Year First Semester University BS Mathematics-I - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Programming in c 2 2 50 English Communication 3-0 2 100 50 2 1 50 Skill Workshop/ Drawing 4 2 100 Total 16 18 600 300 18 7 300 Total : 1200 Total s: 25 Code Course Name Second Semester University marks BS Mathematics-II - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Data Structure Using C Business communication Workshop/ Drawing 3-1 3 100 50 2 2 50 3-0 2 100 50 2 1 50 4 2 100 MC NSS/NCC - - - - Total 17 18 600 300 14 7 300 Total : 1200 Total s: 25
Page63 Code Course Name Second Year Third Semester University PC Elements of Fashion PC Fundamental of Textile- PC I Elements of Design &Colour PC Traditional Textile PC Polymer Chemistry & Fiber Science Economics/ Organizational Behavior 2-1 3 100 50 Total 19 19 600 300 8 4 200 Total : 1100 Total s: 23 Laboratories : 2. Sketching & Fashion Illustration Lab 2.Textile Manufacturing Lab 5. Basic Design &Colour Concept Lab 4. Traditional Textile Lab Code Course Name Purely Applied Mathematics for Specific Branch of PC Fundamental of Textile- II PC Garment Manufacturing Technology-I Fourth Semester University PC Introduction to Draping PC Embroidery & Surface Ornamentation Economics/ Organizational Behavior *Skill Project and Hands on 2-1 3 100 50 6 3 100 Total 18 18 600 300 14 7 300 Total : 1200 Total s: 25
Page64 *College should conduct at least one NSDC program under this category. Laboratories : 1. Textile Design Lab 2.Garment Pattern Making & Garment Construction Lab-1 3. Draping Lab 4. Embroidery & Surface OrnamentationTechnology Code Course Name week PC PC PC OE Textiles & Garment Testing Fashion Designing Using CAD Garment Manufacturing Technology-II Home Furnishing & Interior Design/Fabric & Trim Research & Sourcing/Technical Textile Garment Quality Checking/Fashion Business & manufacturing Process Third Year Fifth Semester University PC Advance Lab-I 8 4 200 Total 17 17 500 250 14 7 350 Total : 1100 Total s: 24 For Honours and Minor Laboratories : 1. Textile & Garment Testing Lab 2.Computer aided Garment Designing Lab 3. Garment Pattern Making & Garment Construction Lab 4. Design Idea & fashion Co-ordination Sixth Semester Code Course Name University Evaluatio
Page65 PC PC MC & GS Computer Aided Pattern Making Garment Processing & Finishing Apparel Production,Planning,Contro lling& Scheduling/Enviromental Management in Garment Industry/Apparel Product Development/Export Management Apparel Marketing, Retailing & Merchandising/Industrial Engg. In Garment Industry/Supply Chain Management & Logistics in Apparel Industry Environmental Science & n OE Industrial Lecture # 3 1 50 Presentation Skill & Skill 2-0 1 50 4 2 100 for Interview # # MC Yoga 2 1 50 Total 19 18 500 300 13 7 300 Total : 1100 Total s: 24 # To be conducted by the Training & Placement department by inviting experts from the industry. No academician to be called. Record may be asked by the University for verification. to be done by the TPO. # # To be conducted by the Training & Placement department of the College. Laboratories : 1. Computer Aided Pattern Making Lab 2. Garment Processing & Finishing Lab Final Year Code Course Name Seventh Semester University Theor y GS Nano Science & Bio Evaluatio n week
Page66 OE Technology Smart Textiles & Functional Garments/Technical Textiles & Protective Clothing Brand Design & management/process Control In Apparel Manufacturing & Quality Control Soft Computing */ Other subjects PC Advance Lab-II/ Project 8 4 200 Projects on Internet of Things 8 4 200 Total 16 16 400 200 19 8 400 Total : 1000 Total s: 24 *Student can choose from any department but subject must be running in that semester. Laboratories : 1. Soft-Computing in Fashion Lab Eighth Semester Training cum Project Code Course Name week Total Industrial Training cum Project/ Entrepreneurship Training cum Project / Stratup Training cum Project 30 20 1000 by the Industry / Training Organisation Scheme by the Institute (Report & Institute Viva) Total 30 20 1000 1000 Total :1000 Total s:20 500 500 Note- Minimum Pass Mark from Industry is 300 (i.e. 60%).
Page67 Distribution of Semester wise: Semester First 25 Second 25 Third 23 Fourth 25 Fifth 24 Sixth 24 Seventh 24 Eighth 20 ------------------------------------- Total 190 Scheme Attendance & Class Interaction 05 Assignment 05 Surprise Test 05 Quiz 05 Class Test I & II 30 Total 50 Class Test Time(Hrs.): 1 Pass Mark in is 50% of total marks i.e. 25 External Scheme University Semester Examination of 3 Hours duration. Pass mark will be 35% which means students have to score 35 out of 100. /Sessional Scheme Pass mark will be 50% which means students have to score 25 out of 50. Scheme Attendance & Daily Performance -10 Lab Record - 10 Lab Quiz - 05 Final Experiments & Viva 25 ------------------------------------------------------- Total=50 All Lab examinations are to be completed one week before the end semester examination and marks are to be displayed on the college notice board.
Page68 SCHEME OF INSTRUCTION AND EVALUATION I - VIII SEMTER OF B.TECH. DEGREE PROGRAMME Code Course Name Branch-Information Technology First Year First Semester University BS Mathematics-I - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Programming in c 2 2 50 English Communication 3-0 2 100 50 2 1 50 Skill Workshop/ Drawing 4 2 100 Total 16 18 600 300 18 7 300 Total : 1200 Total s: 25 Code Course Name week Second Semester University marks BS Mathematics-II - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Data Structure Using C Business communication Workshop/ Drawing 3-1 3 100 50 2 2 50 3-0 2 100 50 2 1 50 4 2 100 MC NSS/NCC - - - - Total 17 18 600 300 14 7 300 Total : 1200 Total s: 25
Page69 Code Course Name week PC Switching & Logic Design PC Object Oriented Programming using JAVA PC Introduction to 3D Technology Second Year Third Semester University PC Software Engg. PC Discrete Structures 2-1 3 100 50 Economics/ Organizational Behavior Total 19 19 600 300 8 4 200 Total : 1100 Total s: 23 Code Course Name week Purely Applied Mathematics for Specific Branch of PC Computer Organization & Architecture PC Design & Analysis of Algorithms Fourth Semester University PC Database System PC Formal Language & Automata Economics/ Organizational Behavior *Skill Project and Hands on 2-1 3 100 50 6 3 100 Total 18 18 600 300 14 7 300 Total : 1200 Total s: 25
Page70 *College should conduct at least one NSDC program under this category. Cod e Course Name wee k Third Year Fifth Semester Theor y Universit y Evaluatio n wee k Practica l PC Operating system PC Advanced JAVA Programming PC E-Commerce & ERP OE Computer Graphics/Internet of Things/Software testing/parallel Algorithms Cloud Computing/Data Mining & Data Warehousing/Compute r Vision/Information Retrieval PC Advance Lab-I 8 4 200 Total 17 17 500 250 14 7 350 Total : 1100 Total s: 24 Mark s Sixth Semester Code Course Name week University week PC PC Computer Network & Data Communication Internet & Web Technology Compiler Design/Digital Image Processing/ Requirement Engg./Natural Language Processing/Wireless
Page71 MC & GS Sensor Networks/Beg Data Analytics Pattern Recognition/ Machine Learning/Object Oriented Software Engg. Environmental Science & OE Industrial Lecture # 3 1 50 2-0 1 50 4 2 100 Presentation Skill & Skill for Interview # # MC Yoga 2 1 50 Total 19 18 500 300 13 6 300 Total : 1100 Total s: 24 # To be conducted by the Training & Placement department by inviting experts from the industry. No academician to be called. Record may be asked by the University for verification. to be done by the TPO. # # To be conducted by the Training & Placement department of the College. Final Year Cod e GS Course Name Nano Science & Bio Technology Cryptography & Network Security/Usability Engg./Service Oriented Architecture/Social Networks Mobile Computing/Software Project Management/Algorith m for Bioinfomatics/Experts Systems wee k Seventh Semester Universit Theor y y OE Soft Computing */ Evaluatio n wee k Practica l Mark s
Page72 Other subjects PC Advance Lab-II/ Project 8 4 200 Projects on Internet of Things 8 4 200 Total 16 16 400 200 16 8 400 Total : 1000 Total s: 24 *Student can choose from any department but subject must be running in that semester. Eighth Semester Training cum Project Code Course Name week Total Industrial Training cum Project/ Entrepreneurship Training cum Project / Stratup Training cum Project 30 20 1000 by the Industry / Training Organisation Scheme by the Institute (Report & Institute Viva) Total 30 20 1000 1000 Total :1000 Total s:20 500 500 Note- Minimum Pass Mark from Industry is 300 (i.e. 60%). Distribution of Semester wise: Semester First 25 Second 25 Third 23 Fourth 25 Fifth 24 Sixth 24 Seventh 24 Eighth 20 -------------------------------------
Page73 Total 190 Scheme Attendance & Class Interaction 05 Assignment 05 Surprise Test 05 Quiz 05 Class Test I & II 30 Total 50 Class Test Time(Hrs.): 1 Pass Mark in is 50% of total marks i.e. 25 External Scheme University Semester Examination of 3 Hours duration. Pass mark will be 35% which means students have to score 35 out of 100. /Sessional Scheme Pass mark will be 50% which means students have to score 25 out of 50. Scheme Attendance & Daily Performance -10 Lab Record - 10 Lab Quiz - 05 Final Experiments & Viva 25 ------------------------------------------------------- Total=50 All Lab examinations are to be completed one week before the end semester examination and marks are to be displayed on the college notice board.
Page74 SCHEME OF INSTRUCTION AND EVALUATION I - VIII SEMTER OF B.TECH. DEGREE PROGRAMME Code Course Name Branch-Instrumentation & First Year First Semester University BS Mathematics-I - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Programming in c 2 2 50 English Communication 3-0 2 100 50 2 1 50 Skill Workshop/ Drawing 4 2 100 Total 16 18 600 300 18 7 300 Total : 1200 Total s: 25 Code Course Name week Second Semester University marks BS Mathematics-II - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Data Structure Using C Business communication Workshop/ Drawing 3-1 3 100 50 2 2 50 3-0 2 100 50 2 1 50 4 2 100 MC NSS/NCC - - - - Total 17 18 600 300 14 7 300 Total : 1200 Total s: 25
Page75 Code Course Name week PC Analog Electronics Circuit PC Electrical & Electronics Measurement PC Energy Conversion Devices Second Year Third Semester University PC Network PC Electromagnetic Field Economics/ Organizational Behavior 2-1 3 100 50 Total 19 19 600 300 8 4 200 Total : 1100 Total s: 23 Code Course Name week Purely Applied Mathematics for Specific Branch of PC Communication System Engg. Fourth Semester University PC Control System Engg. PC Digital Electronics PC Instrument Devices & System-I Economics/ Organizational Behavior *Skill Project and Hands on 2-1 3 100 50 6 3 100 Total 18 18 600 300 14 7 300 Total : 1200 Total s: 25
Page76 *College should conduct at least one NSDC program under this category. Cod e PC PC Course Name Instrument Devices & System-II Microprocessor & its Interfacing Third Year Fifth Semester Theor y we ek Universit y Evaluatio n we ek Practic al PC Digital Signal Processing OE Radar & TV /Fibre Optics Instrumentation/Optoelectro nics Device & Instrumentation/Advanced Electronics Circuits Numerical Methods/Computer Network & Data Communication PC Advance Lab-I 8 4 200 Total 17 17 500 250 14 7 350 Total : 1100 Total s: 24 Mark s Cod e Course Name wee k Sixth Semester Universit Theor y y Evaluatio n wee k Practica l PC Process Control PC Industrial Automation MC & GS Intelligent & Virtual Instrumentation/Advance d Control System/Process Simulation & Modelling Biomedical Instrumentation/Wireless & Sensor Network/Robotics & Robot Applications Environmental Science & OE Industrial Lecture # 3 1 50 Mark s
Page77 Presentation Skill & Skill for Interview # # 2-0 1 50 4 2 100 MC Yoga 2 1 50 Total 19 18 500 300 13 6 300 Total : 1100 Total s: 24 # To be conducted by the Training & Placement department by inviting experts from the industry. No academician to be called. Record may be asked by the University for verification. to be done by the TPO. # # To be conducted by the Training & Placement department of the College. Cod e GS OE Course Name Nano Science & Bio Technology Microwave & Antenna Engg./ Microcontroller & its Application/Satellite Communication/Digital Image Processing VLSI Design/MEMS/Renewabl e Energy Sorces/embedded Systems Soft Computing */ Other subjects Final Year Seventh Semester wee Universit k Theor y y Evaluatio n wee k Practica l PC Advance Lab-II/ Project 8 4 200 Mark s Projects on Internet of Things 8 4 200 Total 16 16 400 200 16 8 400 Total : 1000 Total s: 24 *Student can choose from any department but subject must be running in that semester.
Page78 Eighth Semester Training cum Project Code Course Name week Total Industrial Training cum Project/ Entrepreneurship Training cum Project / Stratup Training cum Project 30 20 1000 by the Industry / Training Organisation Scheme by the Institute (Report & Institute Viva) Total 30 20 1000 1000 Total :1000 Total s:20 500 500 Note- Minimum Pass Mark from Industry is 300 (i.e. 60%). Distribution of Semester wise: Semester First 25 Second 25 Third 23 Fourth 25 Fifth 24 Sixth 24 Seventh 24 Eighth 20 ------------------------------------- Total 190 Scheme Attendance & Class Interaction 05 Assignment 05 Surprise Test 05 Quiz 05 Class Test I & II 30 Total 50 Class Test Time(Hrs.): 1
Page79 Pass Mark in is 50% of total marks i.e. 25 External Scheme University Semester Examination of 3 Hours duration. Pass mark will be 35% which means students have to score 35 out of 100. /Sessional Scheme Pass mark will be 50% which means students have to score 25 out of 50. Scheme Attendance & Daily Performance -10 Lab Record - 10 Lab Quiz - 05 Final Experiments & Viva 25 ------------------------------------------------------- Total=50 All Lab examinations are to be completed one week before the end semester examination and marks are to be displayed on the college notice board.
Page80 SCHEME OF INSTRUCTION AND EVALUATION I - VIII SEMTER OF B.TECH. DEGREE PROGRAMME Code Course Name Branch-Mechanical First Year First Semester University BS Mathematics-I - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Programming in c 2 2 50 English Communication 3-0 2 100 50 2 1 50 Skill Workshop/ Drawing 4 2 100 Total 16 18 600 300 18 7 300 Total : 1200 Total s: 25 Code Course Name week Second Semester University marks BS Mathematics-II - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Data Structure Using C Business communication Workshop/ Drawing 3-1 3 100 50 2 2 50 3-0 2 100 50 2 1 50 4 2 100 MC NSS/NCC - - - - Total 17 18 600 300 14 7 300 Total : 1200 Total s: 25
Page81 Code Course Name week Second Year Third Semester University PC Mechanics of Solids PC PC Introduction to Physical Metallurgy & Engg Materials Fluid Mechanics & Hydraulics Machines PC Engg. Thermodynamics PC Kinematics & Dynamics 2 1 50 Machines Economics/ Organizational Behavior 2-1 3 100 50 Total 19 19 600 300 8 4 200 Total : 1100 Total s: 23 Code Course Name week Purely Applied Mathematics for Specific Branch of PC Mechanisms & Machines PC Basic Manufacturing Process Fourth Semester University PC IC Engine & Gas Turbine PC Mechanical Measurement, Metallurgy & Reliability Economics/ Organizational Behavior *Skill Project and Hands on 2-1 3 100 50 6 3 100 Total 18 18 600 300 14 7 300 Total : 1200 Total s: 25
Page82 *College should conduct at least one NSDC program under this category. Cod e PC PC Course Name Design of Machine Elements Machining Science & Technology Third Year wee k Fifth Semester Theor y Universit y Evaluatio n wee k Practica l PC Heat Transfer 2 1 50 OE Optimization in Engg./Project Management/Quality Management & Reliability Energy Conversion Techniques/Human Resources Management/Marketin g Management/ C++ & Object Oriented Programming/Internet & Web Technology/Analog & Digital Electronics/Digital Signal Processing PC Advance Lab-I 8 4 200 Total 17 17 500 250 14 7 350 Total : 1100 Total s: 24 Mark s Cod e PC Course Name Production & Operation Management wee k Theor y Sixth Semester Universit y Evaluatio n wee k Practica l Mark s
Page83 PC MC & GS Refrigeration & Air Conditioning Product Design & Production Tooling/Computer Integrated Manufacturing & FMS/CAD & CAM Compressive Flow & Gas Dynamics/Automobil e Engg./ Non- Conventional Energy Sources Environmental Science & OE Industrial Lecture # 3 1 50 Presentation Skill & 2-0 1 50 4 2 100 Skill for Interview # # MC Yoga 2 1 50 Total 19 18 500 300 13 6 300 Total : 1100 Total s: 24 # To be conducted by the Training & Placement department by inviting experts from the industry. No academician to be called. Record may be asked by the University for verification. to be done by the TPO. # # To be conducted by the Training & Placement department of the College. Final Year Cod e GS OE PC Course Name Nano Science & Bio Technology Mechanical Vibration/Tribology/Fatigue Creep & Fracture Robotics/Simulation,Modelli ng & Control/Mechatronics & MEMs Soft Computing */ Other subjects Advance Lab-II/ Project/3D Printing Seventh Semester wee Universit k Theor y y Evaluatio n wee k Practic al Mark s 8 4 200
Page84 Projects on Internet of Things 8 4 200 Total 16 16 400 200 16 8 400 Total : 1000 Total s: 24 *Student can choose from any department but subject must be running in that semester. Eighth Semester Training cum Project Code Course Name week Total Industrial Training cum Project/ Entrepreneurship Training cum Project / Stratup Training cum Project 30 20 1000 by the Industry / Training Organisation Scheme by the Institute (Report & Institute Viva) Total 30 20 1000 1000 Total :1000 Total s:20 500 500 Note- Minimum Pass Mark from Industry is 300 (i.e. 60%). Distribution of Semester wise: Semester First 25 Second 25 Third 23 Fourth 25 Fifth 24 Sixth 24 Seventh 24 Eighth 20 ------------------------------------- Total 190
Page85 Scheme Attendance & Class Interaction 05 Assignment 05 Surprise Test 05 Quiz 05 Class Test I & II 30 Total 50 Class Test Time(Hrs.): 1 Pass Mark in is 50% of total marks i.e. 25 External Scheme University Semester Examination of 3 Hours duration. Pass mark will be 35% which means students have to score 35 out of 100. /Sessional Scheme Pass mark will be 50% which means students have to score 25 out of 50. Scheme Attendance & Daily Performance -10 Lab Record - 10 Lab Quiz - 05 Final Experiments & Viva 25 ------------------------------------------------------- Total=50 All Lab examinations are to be completed one week before the end semester examination and marks are to be displayed on the college notice board.
Page86 SCHEME OF INSTRUCTION AND EVALUATION I - VIII SEMTER OF B.TECH. DEGREE PROGRAMME Code Course Name Branch-Metallurgical & Materials First Year First Semester University BS Mathematics-I - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Programming in c 2 2 50 English Communication 3-0 2 100 50 2 1 50 Skill Workshop/ Drawing 4 2 100 Total 16 18 600 300 18 7 300 Total : 1200 Total s: 25 Code Course Name Second Semester University BS Mathematics-II - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Data Structure Using C Business communication Workshop/ Drawing 3-1 3 100 50 2 2 50 3-0 2 100 50 2 1 50 4 2 100 MC NSS/NCC - - - - Total 17 18 600 300 14 7 300 Total : 1200 Total s: 25
Page87 Code Course Name PC Science &Engg. Of Materials PC Metallurgical Thermodynamics & Kinetics Second Year Third Semester University PC Transport Phenomena PC Materials Processing PC Principle OF Extractive Metallurgy Economics/ Organizational Behavior 2-1 3 100 50 Total 19 19 600 300 8 4 200 Total : 1100 Total s: 23 Code Course Name Purely Applied Mathematics for Specific Branch of PC Phase Transformation & Heat Treatment Fourth Semester University PC Mineral Processing PC Composite Material PC Deformation Behavior of Materials Economics/ Organizational Behavior *Skill Project and Hands on 2-1 3 100 50 6 3 100 Total 18 18 600 300 14 7 300 Total : 1200 Total s: 25 *College should conduct at least one NSDC program under this category.
Page88 Third Year Fifth Semester Code Course Name University PC Mechanical Working & Testing of Materials PC Solidification & Casting Processes week PC Ferrous Metallurgy-I OE PC Fuel Furnaces & Refractories/Nanomate rials/characterization Advance Numerical Methods/Non- Conventional energy Sources/Operating system/industrial Process Control & Dynamics Advance Lab- I(Advanced Materials Processing) 8 4 200 Total 17 17 500 250 14 7 350 Total : 1100 Total s: 24 Sixth Semester Code Course Name University PC X-ray & electron Microscopy week PC Ferrous Metallurgy-II MC &GS Corrosion & Degradation of Materials/Joining of Materials/Advances Casting Processes Non-Ferrous Extractive Metallurgy/ Environmental Science & OE Industrial Lecture # 3 1 50 2-0 1 50 4 2 100 Presentation Skill & Skill for Interview # #
Page89 MC Yoga 2 1 50 Total 19 18 500 300 13 6 300 Total : 1100 Total s: 24 # To be conducted by the Training & Placement department by inviting experts from the industry. No academician to be called. Record may be asked by the University for verification. to be done by the TPO. # # To be conducted by the Training & Placement department of the College. Code Course Name GS Nano Science & Bio Technology Materials for Advanced Applications/Engg. Polymers/Surface Engg. Alternative Routes of Iron Making/Ferroalloys Technology/Electromet allurgy OE Soft Computing */ Other subjects Final Year Seventh Semester University Evaluatio n PC Advance Lab-II/ Project 8 4 200 8 4 200 Projects on Internet of Things Total 16 16 400 200 16 8 400 Total : 1000 Total s: 24 *Student can choose from any department but subject must be running in that semester. Eighth Semester Training cum Project Code Course Name Total Scheme
Page90 Industrial Training cum Project/ Entrepreneurship Training cum Project / Stratup Training cum Project 30 20 1000 by the Industry / Training Organisation by the Institute (Report & Institute Viva) Total 30 20 1000 1000 Total :1000 Total s:20 500 500 Note- Minimum Pass Mark from Industry is 300 (i.e. 60%). Distribution of Semester wise: Semester First 25 Second 25 Third 23 Fourth 25 Fifth 24 Sixth 24 Seventh 24 Eighth 20 ------------------------------------- Total 190 Scheme Attendance & Class Interaction 05 Assignment 05 Surprise Test 05 Quiz 05 Class Test I & II 30 Total 50 Class Test Time(Hrs.): 1 Pass Mark in is 50% of total marks i.e. 25 External Scheme
Page91 University Semester Examination of 3 Hours duration. Pass mark will be 35% which means students have to score 35 out of 100. /Sessional Scheme Pass mark will be 50% which means students have to score 25 out of 50. Scheme Attendance & Daily Performance -10 Lab Record - 10 Lab Quiz - 05 Final Experiments & Viva 25 ------------------------------------------------------- Total=50 All Lab examinations are to be completed one week before the end semester examination and marks are to be displayed on the college notice board.
Page92 SCHEME OF INSTRUCTION AND EVALUATION I - VIII SEMTER OF B.TECH. DEGREE PROGRAMME Code Course Name Branch-Mineral First Year First Semester University BS Mathematics-I - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Programming in c 2 2 50 English Communication 3-0 2 100 50 2 1 50 Skill Workshop/ Drawing 4 2 100 Total 16 18 600 300 18 7 300 Total : 1200 Total s: 25 Code Course Name week Second Semester University marks BS Mathematics-II - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Data Structure Using C Business communication Workshop/ Drawing 3-1 3 100 50 2 2 50 3-0 2 100 50 2 1 50 4 2 100 MC NSS/NCC - - - - Total 17 18 600 300 14 7 300 Total : 1200 Total s: 25
Page93 Code Course Name week PC Introduction to Mineral Processing Second Year Third Semester University PC Geology PC Particulate Technology PC Analytical Technology in Mineral Engg. PC Fluid Mechanics 2 1 50 2-1 3 100 50 Economics/ Organizational Behavior Total 19 19 600 300 8 4 200 Total : 1100 Total s: 23 Code Course Name week Purely Applied Mathematics for Specific Branch of PC Communication & Classification PC Bulk Material Handling System Fourth Semester University PC Physical Separation PC Advanced Fluid Mechanics Economics/ Organizational Behavior *Skill Project and Hands on 2-1 3 100 50 6 3 100 Total 18 18 600 300 14 7 300 Total : 1200 Total s: 25
Page94 *College should conduct at least one NSDC program under this category. Third Year Fifth Semester Code Course Name week University week PC Coal Preparation PC PC OE Surface Phenomenon & Froth Flotation Process Equipment Selection & Design Mineral Legislation & Safety/Industrial Waste Treatment & Management Extractive Metallurgy/Mining Machinery PC Advance Lab-I 8 4 200 Total 17 17 500 250 14 7 350 Total : 1100 Total s: 24 For Honours and Minor Cod e PC Course Name Flow Sheet Design & Plant Layout Sixth Semester wee Universit k Theor y y Evaluatio n wee k Practica l PC Dewatering & Drying MC & GS Modelling & Simulation of Mineral Processing Unit Operation/Iron & Steel Making Aggloneration Technique/Beneficiatio n Process Control Environmental Science & OE Industrial Lecture # 3 1 50 Presentation Skill & 2-0 1 50 4 2 100 Mark s
Page95 Skill for Interview # # MC Yoga 2 1 50 Total 19 18 500 300 13 6 300 Total : 1100 Total s: 24 # To be conducted by the Training & Placement department by inviting experts from the industry. No academician to be called. Record may be asked by the University for verification. to be done by the TPO. # # To be conducted by the Training & Placement department of the College. Final Year Seventh Semester Code Course Name week University GS Nano Science & OE PC Bio Technology Clean Coal Technology/Fuel Refractories & furnaces Process Control & Instrumentation/ Process Plant simulation Soft Computing */ Other subjects Advance Lab-II/ Project week 8 4 200 Projects on Internet of Things 8 4 200 Total 16 16 400 200 16 8 400 Total : 1000 Total s: 24 For Honours and Minor *Student can choose from any department but subject must be running in that semester. Eighth Semester Training cum Project Scheme Code Course Name week Total
Page96 Industrial Training cum Project/ Entrepreneurship Training cum Project / Stratup Training cum Project 30 20 1000 by the Industry / Training Organisation by the Institute (Report & Institute Viva) Total 30 20 1000 1000 Total :1000 Total s:20 500 500 Note- Minimum Pass Mark from Industry is 300 (i.e. 60%). Distribution of Semester wise: Semester First 25 Second 25 Third 23 Fourth 25 Fifth 24 Sixth 24 Seventh 24 Eighth 20 ------------------------------------- Total 190 Scheme Attendance & Class Interaction 05 Assignment 05 Surprise Test 05 Quiz 05 Class Test I & II 30 Total 50 Class Test Time(Hrs.): 1 Pass Mark in is 50% of total marks i.e. 25
Page97 External Scheme University Semester Examination of 3 Hours duration. Pass mark will be 35% which means students have to score 35 out of 100. /Sessional Scheme Pass mark will be 50% which means students have to score 25 out of 50. Scheme Attendance & Daily Performance -10 Lab Record - 10 Lab Quiz - 05 Final Experiments & Viva 25 ------------------------------------------------------- Total=50 All Lab examinations are to be completed one week before the end semester examination and marks are to be displayed on the college notice board.
Page98 SCHEME OF INSTRUCTION AND EVALUATION I - VIII SEMTER OF B.TECH. DEGREE PROGRAMME Branch-Production / Manufacturing Code Course Name First Year First Semester University BS Mathematics-I - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Programming in c 2 2 50 English Communication 3-0 2 100 50 2 1 50 Skill Workshop/ Drawing 4 2 100 Total 16 18 600 300 18 7 300 Total : 1200 Total s: 25 Code Course Name week Second Semester University marks BS Mathematics-II - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Data Structure Using C Business communication Workshop/ Drawing 3-1 3 100 50 2 2 50 3-0 2 100 50 2 1 50 4 2 100 MC NSS/NCC - - - - Total 17 18 600 300 14 7 300 Total : 1200 Total s: 25
Page99 Code Course Name week PC Manufacturing Technology I PC Introduction to Physical Methodology & Engg. Material PC Applied Thermodynamics Second Year Third Semester University PC of Machine PC Strength of Material 2 1 50 2-1 3 100 50 Economics/ Organizational Behavior Total 19 19 600 300 8 4 200 Total : 1100 Total s: 23 Code Course Name week Purely Applied Mathematics for Specific Branch of PC Manufacturing Science II PC Design of Machine Elements Fourth Semester University PC Metrology & Inspection PC Robotics & FMS Economics/ 2-1 3 100 50 Organizational Behavior *Skill Project and Hands on 6 3 100 Total 18 18 600 300 14 7 300 Total : 1200 Total s: 25
Page100 *College should conduct at least one NSDC program under this category. Cod e PC PC Course Name Production & Operation Management Materials Deformation Processes Third Year Fifth Semester wee Universit k Theor y y Evaluatio n wee k Practica l PC Tool Design OE Statistical Quality Control & Reliability/Fluid Mechanics & Fluid Power Engg./Plastic Processing/Work Study & Ergonomics Human Resources Management/C++ & Object Oriented Programming/Internet & Web Technology/Tribology/No n-convention Energy Sources/Supply Chain Management PC Advance Lab-I 8 4 200 Total 17 17 500 250 14 7 350 Total : 1100 Total s: 24 Mark s Cod e Course Name Sixth Semester wee Universit k Theor y y Evaluatio n wee k Practica l PC Non-Traditional Machining PC CAD/CAM Computer Integrated Manufacturing/Maintenan ce Engg. & Management/Precision Engg. Rapid manufacturing Mark s
Page101 MC & GS Process/Machine Tool Design/Plastic Mold & Die Design Environmental Science & OE Industrial Lecture # 3 1 50 Presentation Skill & Skill 2-0 1 50 4 2 100 for Interview # # MC Yoga 2 1 50 Total 19 18 500 300 13 6 300 Total : 1100 Total s: 24 # To be conducted by the Training & Placement department by inviting experts from the industry. No academician to be called. Record may be asked by the University for verification. to be done by the TPO. # # To be conducted by the Training & Placement department of the College. Final Year Cod e Course Name GS Nano Science & Bio Technology Product Design & Development/Industria l Hydraulics/Surface Engg./Instrumentation & Control Engg. Design of Experiment/Design for Manufacturing & Assembly/Mechatronic s & MEMS OE Soft Computing */ Other subjects PC Advance Lab-II/ Project/3D Projects on Internet of Things wee k Seventh Semester Universit Theor y y Evaluatio n wee k Practica l Mark s 8 4 200 8 4 200 Total 16 16 400 200 16 8 400 Total : 1000 Total s: 24
Page102 *Student can choose from any department but subject must be running in that semester. Eighth Semester Training cum Project Code Course Name week Total Industrial Training cum Project/ Entrepreneurship Training cum Project / Stratup Training cum Project 30 20 1000 by the Industry / Training Organisation Scheme by the Institute (Report & Institute Viva) Total 30 20 1000 1000 Total :1000 Total s:20 500 500 Note- Minimum Pass Mark from Industry is 300 (i.e. 60%). Distribution of Semester wise: Semester First 25 Second 25 Third 23 Fourth 25 Fifth 24 Sixth 24 Seventh 24 Eighth 20 ------------------------------------- Total 190 Scheme Attendance & Class Interaction 05 Assignment 05 Surprise Test 05
Page103 Quiz 05 Class Test I & II 30 Total 50 Class Test Time(Hrs.): 1 Pass Mark in is 50% of total marks i.e. 25 External Scheme University Semester Examination of 3 Hours duration. Pass mark will be 35% which means students have to score 35 out of 100. /Sessional Scheme Pass mark will be 50% which means students have to score 25 out of 50. Scheme Attendance & Daily Performance -10 Lab Record - 10 Lab Quiz - 05 Final Experiments & Viva 25 ------------------------------------------------------- Total=50 All Lab examinations are to be completed one week before the end semester examination and marks are to be displayed on the college notice board.
Page104 SCHEME OF INSTRUCTION AND EVALUATION I - VIII SEMTER OF B.TECH. DEGREE PROGRAMME Code Course Name Branch-Textile First Year First Semester University BS Mathematics-I - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Programming in c 2 2 50 English Communication 3-0 2 100 50 2 1 50 Skill Workshop/ Drawing 4 2 100 Total 16 18 600 300 18 7 300 Total : 1200 Total s: 25 Code Course Name Second Semester University marks BS Mathematics-II - - - BS Chemistry/ Physics Basics of Electronics / Basic Electrical Mechanics/ Thermodynamics Data Structure Using C Business communication Workshop/ Drawing 3-1 3 100 50 2 2 50 3-0 2 100 50 2 1 50 4 2 100 MC NSS/NCC - - - - Total 17 18 600 300 14 7 300 Total : 1200 Total s: 25
Page105 Code Course Name PC Fibre Science & Technology-I Second Year Third Semester University PC Yarn Manufacturing-I PC Fabric Manufacturing-I PC Textile Chemical PC Processing-I Application of Statistics for Textile Manufacturing Economics/ Organizational Behavior 2-1 3 100 50 Total 19 19 600 300 8 4 200 Total : 1100 Total s: 23 Code Course Name week Purely Applied Mathematics for Specific Branch of PC Fibre Science & Technology-II Fourth Semester University PC Yarn Manufacturing-II PC Fabric Manufacturing-II PC Textile Chemical Processing-II Economics/ Organizational Behavior *Skill Project and Hands on 2-1 3 100 50 6 3 100 Total 18 18 600 300 14 7 300 Total : 1200 Total s: 25 *College should conduct at least one NSDC program under this category.
Page106 Third Year Fifth Semester Code Course Name University PC Yarn Manufacturing-III PC Fabric Manufacturing-III PC Fabric Structure & OE Design Process Control in Yarn Manufacturing/Process Control in Fabric Manufacturing/Process Control in Textile Chemical Processing Polymer &Fibrescience/Producti on Management/Product Development PC Advance Lab-I 8 4 200 Total 17 17 500 250 14 7 350 Total : 1100 Total s: 24 Code Course Name PC of Textile Structure PC Testing of Textile Materials High Performance FIbres/Textile Composites/Manufactur ing of Specialty Yarn Manufacturing of Specialty Textiles/Advanced Chemical Processing/Apparel Technology MC & Environmental Science GS & Sixth Semester University OE Industrial Lecture # 3 1 50
Page107 Presentation Skill & Skill for Interview # # 2-0 1 50 4 2 100 MC Yoga 2 1 50 Total 19 18 500 300 13 6 300 Total : 1100 Total s: 24 # To be conducted by the Training & Placement department by inviting experts from the industry. No academician to be called. Record may be asked by the University for verification. to be done by the TPO. # # To be conducted by the Training & Placement department of the College. Code Course Name GS Nano Science & Bio Technology Clothing Science & Technology/Medical textiles/advancement in Textile Testing & Statistical Analysis/Textile Finishing & Clothing Care Textile Mill Organization, costing & Economics/Supply Chain Management in Textile Industry/Maintenance Management for Textile Industry/Entrepreneursh ip in Textile OE Soft Computing */ Other subjects Final Year Seventh Semester University PC Advance Lab-II/ Project 8 4 200 Projects on Internet of Things 8 4 200 Total 16 16 400 200 16 8 400 Total : 1000 Total s: 24
Page108 *Student can choose from any department but subject must be running in that semester. Code Course Name Industrial Training cum Project/ Entrepreneurship Training cum Project / Stratup Training cum Project Eighth Semester Training cum Project Total 30 20 1000 by the Industry / Training Organisation by the Institute (Report & Institute Viva) Scheme Total 30 20 1000 1000 Total :1000 Total s:20 500 500 Note- Minimum Pass Mark from Industry is 300 (i.e. 60%). Distribution of Semester wise: Semester First 25 Second 25 Third 23 Fourth 25 Fifth 24 Sixth 24 Seventh 24 Eighth 20 ------------------------------------- Total 190 Scheme Attendance & Class Interaction 05 Assignment 05
Page109 Surprise Test 05 Quiz 05 Class Test I & II 30 Total 50 Class Test Time(Hrs.): 1 Pass Mark in is 50% of total marks i.e. 25 External Scheme University Semester Examination of 3 Hours duration. Pass mark will be 35% which means students have to score 35 out of 100. /Sessional Scheme Pass mark will be 50% which means students have to score 25 out of 50. Scheme Attendance & Daily Performance -10 Lab Record - 10 Lab Quiz - 05 Final Experiments & Viva 25 ------------------------------------------------------- Total=50 All Lab examinations are to be completed one week before the end semester examination and marks are to be displayed on the college notice board.