BUILT ON DIVERSIFICATION Saulsbury Industries is a full-service Engineering, Procurement and Construction (EPC) contractor that has provided engineering, general construction, and electrical and maintenance services to heavy industrial markets nationwide for more than 47 years. Headquartered in Odessa, Texas, Saulsbury is a family owned debt-free company with annual revenue of more than $600 million and with more than 2000 employees. Saulsbury continues to provide reliable services to its clients. BUILT ON INTEGRITY Saulsbury s reputation for honesty and integrity has enabled the company to successfully complete small to large projects across diverse industries and markets. The company s extensive experience ensures competitive cost estimates, optimized schedules and unmatched resources. Saulsbury s clients are confident in the company s ability to get the job done safely and efficiently. MARKETS SERVED Refining Petrochemical Gas/CO2 Processing Power Maintenance Manufacturing Transmission & Renewables Automation Insulation & Scaffolding Mining Nuclear
BUILT ON SAFETY Saulsbury Industries values the health and safety of our employees and is committed to injury-free performance. Saulsbury shareholders, Board of Directors and management team are dedicated to maintaining a culture of safety throughout the organization. LOST TIME INCIDENT RATE INDUSTRY STANDARD: 1.0 RECORDABLE INCIDENT RATE INDUSTRY STANDARD: 2.5 EXPERIENCE MODIFICATION RATE INDUSTRY STANDARD: 1.0 Safety is one of our core values. Our employees are our most important asset. All accidents are preventable. We simply WILL NOT put our employees and those of our clients in jeopardy. - C.R. Dick Saulsbury, Sr. Founder & Director of Community Affairs, Saulsbury Industries
BUILT ON FABRICATION Saulsbury offers a full service, industrial fabrication shop with the ability to fabricate process or ASME code vessels and equipment, electrical, instrumentation, and controls packaging of skid equipment and structural steel, as well as offering an API certified machine shop. With fabrication facilities in both Odessa, TX and Henderson, TX, Saulsbury has the ability to fully service your fabrication and machining requirements. Odessa 26,000 sq. ft. shop on 26 acres Henderson Over 60,000 sq. ft. shop on 17 acres Saulsbury s commitment to each customer is to guarantee on-time deliveries, provide consistent competitive prices, and produce quality products that exceed all industry standards. IN-HOUSE ENGINEERING AND DRAFTING Dozens of highly skilled professionals guarantee outstanding accuracy and genuine customer service Strong Vendor Relations along with our facilities and team of experts allows for Accelerated Deliveries for your Emergency Requirements Quotations which include all customer specifications -plus Alternates and Options for your consideration Qualified weld procedures for: SMAW GMAW GTAW FCAW SAW
VESSELS & TOWERS Saulsbury Industries is certified by the American Society of Mechanical Engineers (ASME) for the design, manufacture, installation and repair of pressure vessels, utilizing both the U Stamp for the fabrication of ASME Code vessels and tanks, and the R Stamp to perform Code related repair activities on existing stamped vessels or tanks. Saulsbury also utilizes the ASME A Stamp for the installation of Power Boilers and the PP Stamp for fabrication of custom boiler tubes or piping spools for use in ASME Code facilities. Saulsbury shop capabilities include the fabrication of exotic piping materials including low and high grade Stainless Steel and chrome piping, including 1-1/4 Chrome through 9 Chrome (P91 and P92). Saulsbury s Quality group has the capabilities to write procedures for almost any welding application, perform the necessary testing and present the documentation of the tests for approval by our clients. The R Stamp also authorizes Saulsbury to make repairs to existing stamped boilers or Boiler Code related piping. In addition to Code pressure vessels, custom shop fabricated tanks - either ASME Code or Non-Boiler Code - are fabricated to the highest quality standards in the Saulsbury fabrication facility.
TANKS Saulsbury s capacity to manufacture ASME Pressure Vessels, API 650 and API 620 Welded Steel Tanks range from small pipe vessels to vessels with diameters up to 16 ft, lengths up to 250 ft, and weights up to 35 tons. Customization of all vessels and tanks: Baffles, Weirs, Dividers, Deflectors, Trays, Packing, Vortex Breakers, Demisters & Spray Nozzles 4000 Watt Laser with axis strokes of 120 x 60 x 6 inches Positioning accuracy (Pa) is 0.001 inch Repeatability (Ps) is 0.001 inch Supporting Saddles, Skirts, Legs & Lugs Internal/External Pipe Coils, External Half Pipe Coils, External Half Pipe Coils & Plate Coils Insulation Supports, Lifting Lugs, Grounding Lugs, Anchors Bolt Chairs & Davits Ladders, Platforms & Handrails External Coatings, Internal Linings, Pickling & Passivating
STRUCTURAL & DUCT WORK Saulsbury is not restrained by the size or complexity of structural projects and utilizes state of the art equipment for cutting, sizing, treating and welding. In conjunction with our highly trained and motivated employees, Saulsbury stands ready to safetly and efficently meet the fabrication requirements of our clients. Material fabricated from many grades of steel, duplex, aluminum and other alloys are manufactured to your configuration requirements. Multi-industry experience gives Saulsbury the ability to meet all of your fabrication needs according to the specifications of a diverse customer base: Power Generation Facilities Oil & Gas Industry Mining, Lumber & Steel Mills Aerospace & Communications Manufacturing Processes, Industrial Engines & Equipment Molds & Extrusion Food & Pharmaceutical
PIPE FABRICATION Saulsbury also has an exemplary record in the design and fabrication of custom Non-Boiler Code pipe spools or other piping applications to satisfy ASME, API or other Codes and Standards. Saulsbury Industries is very proud of the low rejection rate achieved by our pipe welders, which are consistently below the reported rates of comparable fabrication shops. All welders employed by Saulsbury are certified to the requirements of ASME Section IX or other applicable Codes or Standards. Saulsbury Industries Fabrication Facilities also provide services for the design and fabrication of all structural steel related piping attachments to meet industry needs. Saulsbury also utilizes computerized pipe cutting machines and plate cutting machines to assure that cuts are precise, repeatable, and consistently meet the needs of our customers. The Watts computerized pipecutter and the Crossfire and Messer high definition cutting tables utilize either plasma or oxyfuel.
SKID & MODULE As demand for skilled craftsmen increases, many of our clients are exploring options to reduce onsite labor requirements. Saulsbury has met this demand by prefabrication, skid mounting, and modularization of many components related to our various service lines and industries including: Modular pipe racks Skid mounted production equipment Modular Process units Automated flow line skids Some of the many benefits of shop modularization and skid mounting of equipment include: Reduced field installation schedules (allowing fabrication to occur prior to or simultaneously with site civil and facilities engineering). Reduced shop labor rates versus field labor Higher productivity rates (Controlled Environment) Reduced need for infrastructure and employee accommodations in remote areas Reduced safety risks for plant personnel with fewer OSHA exposure hours and smaller crew sizes Given our various service offerings including Fabrication, Shop assembly, Instrument & Electrical, and Insulation & Painting, Saulsbury provides plug and play solutions for all of your Skid and Modular needs.
MACHINE Saulsbury s machine shop is certified by the American Petroleum Institute. It is a full service shop dedicated to both large and small piece production in accordance with API and customer requirements and specifications. Saulsbury s philosophy is to maximize productivity and quality by maintaining facilities and equipment which are the most advanced available to the industry and to maintain a staff of highly skilled professionals capable of using state-of-the-art fabrication techniques. Saulsbury s API Certified Machine Shop understands the extreme tolerances required of custom machining and are able to meet these stringent demands. With the Latest in CNC Equipment, Automated Production is Quick and Accurate. Major Equipment includes: CNC Vertical Mill with up to 30 depth by 30 height by 60 length CNC Lathe with 12 OD by 20 length, 3 diameter bar G&L 5 Spindle Horizontal Boring Mill Bullard VTL 50 Chuck / 57 Swing Hollow Spindle Lathes with up to 11 3/4 OD capacity Bridgeport Series One Milling Machines Various manual and automatic saws
WHY CHOOSE SAULSBURY INDUSTRIES? Excellent Safety Record Repeat Clientele Financially Strong All Disciplines Under One Roof Proven Industry Leader Quality Workmanship Established History Excellent Reputation in the Industry
CORPORATE OFFICE: 2951 E. Interstate 20 Odessa, TX 79766 PHONE: (432) 366-3686 FAX: (432) 368-0061 HENDERSON FABRICATION SHOP: 2800 CR 205N Henderson, TX 75652 PHONE: (903) 392-2248 FAX: (432) 368-0061 GULF COAST OPERATION: 9800 Richmond Avenue, Suite 600 Houston, TX 77042 PHONE: (713) 267-5500 FAX: (713) 591-0628 WWW.SI-TX.COM