International Journal of Engineering Systems Modelling and Simulation 2013 Inderscience Enterprises Ltd
Scope of the Journal Most of the research and experiments in the field of engineering have devoted significant efforts to modelling and simulation of various complicated phenomena and processes occurring in engineering systems. IJESMS provides an international forum and refereed authoritative source of information on the development and advances in modelling and simulation, contributing to the understanding of different complex engineering systems. IJESMS is designed to be a multi-disciplinary, fully refereed, international journal. Contents IJESMS publishes original and peer reviewed technical papers which advance understanding of both the fundamentals of engineering science and its application leading to the solution of problems in engineering systems. It is particularly concerned with the demonstration of engineering science modelling and solutions to specific industrial problems. Surveys of newly maturing topics in the field, major developments in modelling and simulation, review papers and book reviews will also published. Breakthroughs can be communicated via short communication, commentaries, and letters to the editor. Contribution may be made by submission or invitation, and special issues devoted to important topics in engineering systems will also be published. Subject coverage: Suitable topics include, but are not limited to: Analysis and computational methods; heat transfer; experimental investigations; aerodynamics; combustion; chemical reaction and mixing; multiphase flow modelling Computational fluid dynamics (CFD) approach to different engineering systems Dynamic modelling theories, techniques, and application examples of engineering systems Experimental study and/or measurement technology of engineering systems Manufacturing processes; process modelling Performance modelling of automobiles (consumer vehicles, commercial vehicles, and racing vehicles) Structure vibrations; acoustics Various engineering system control and simulation Optimisation of engineering systems Signal processing and identification Other relevant topics International Journal of Engineering Systems Modelling and Simulation www.inderscience.com/ijesms visit www.inderscience.com
Members of the Editorial Board Editors-in-Chief Dr. Xiaogang Yang International Doctoral Innovation Centre University of Nottingham Ningbo, China Dr. Zoubir Zouaoui ^ Glyndwr University, UK Associate Editors Prof. Abderrahmane Baïri Université Paris X, France Prof. Laurent-Emmanuel Brizzi Université de Poitiers, France Dr. Bruno Chanetz ONERA (Office National d'etudes et de Recherches Aérospatiales), France Prof. Alexander S. Chernikov Bauman Moscow State Technical University, Russian Federation Prof. Hastings McKenzie Birmingham City University, UK Prof. Chris Rielly Loughborough University, UK Dr. Tomomi Uchiyama Nagoya University, Japan Prof. Lian-Ping Wang University of Delaware, USA Editorial Board Prof. Pascal Bauer Ecole Nationale Supérieure de Mécanique et d'aérotechnique, France Prof. Stuart Blackburn University of Birmingham, UK Prof. Abdesselam Bouzerdoum University of Wollongong, Australia Dr. Bruno Chanetz ONERA (Office National d'etudes et de Recherches Aérospatiales), France Prof. Jinnan Chen Beijing Institute of Technology, China Prof. Zhen-Min Cheng East China University of Science and Technology, China Prof. M. El Ganaoui Professeur des Universités, France Prof. Mario García De María Universidad Politécnica de Madrid, Spain Prof. Liejin Guo Xi an Jiaotong University, China Prof. Govind Sharan Gupta Indian Institute of Science, India Dr. Mohamed Lahoubi ICAM Ecole d ingénieurs, France Prof. Najib Laraqi Université Paris X, France Prof. Dianzhong Li Institute of Metal Research, China Dr. Ken Mao University of Warwick, UK Prof. Duc T. Pham University of Birmingham, UK Prof. Sergei S Sazhin University of Brighton, UK Dr. Naoki Takada National Institute of Advanced Industrial Science and Technology (AIST), Japan Dr. Koichi Tsujimoto Mie University, Japan Prof. Tomomi Uchyama Nagoya University, Japan Dr Yuriy Vagapov ^ Glyndwr University, UK Prof. Qiuwang Wang Xi an Jiaotong University, China Dr. Simon Wang Loughborough University, UK Prof. Aibing Yu University of New South Wales, Australia Dr. Hongwei Zhang Sheffield Hallam University, UK Prof. Dr. Ing. Abdelhak M. Zoubir Technische Universität Darmstadt, Germany visit www.inderscience.com
Methods of payment Content of Inaugural Issue of IJESMS VOL. 1(1), 2008 Diesel fuel spray penetration, heating, evaporation and ignition: modelling vs. experimentation S.S. Sazhin, S.B. Martynov, T. Kristyadi, C. Crua, M.R. Heikal Direct simulation of viscous flow in a wavy pipe using the lattice Boltzmann approach Lian-Ping Wang, Michael H. Du Two-dimensional vortex simulation of particulate airflow induced by free falling particles Tomomi Uchiyama, Masaaki Naruse Micro-bubble dispersion in a twodimensional mixing layer Xiaogang Yang, Li Li, Chris Rielly, Xiaobing Huang, Zoubir Zouaoui To be completed by all subscribers Terms are payment with order. Payment by cheque, banker s draft or credit card is acceptable. Name of subscriber. Position... Institution... Address... PIV measurements around 2D and 3D building models Laurent-E. Brizzi, Gerard J. Poitras, Yves Gagnon Optimal control of a fed-batch yeast fermentation process based on Least Square Support Vector Machine Hongwei Zhang An efficient numerical solution for system of second order robot arm problem S. Senthilkumar Fax... E-mail... Credit card type and number.. Expiry date... Three-digit security number (on the reverse of the credit card)... Signature... Date... Please address subscription orders to the address overleaf
Subscription order form To find out the subscription rates for International Journal of Engineering Systems Modelling and Simulation (IJESMS), please go to www.inderscience.com/ijesms or http://www.inderscience.com/subscribe.php (for all Inderscience titles, including IJESMS) This form may be photocopied or downloaded from www.inderscience.com/www/ielsubsform2.pdf Journals may be ordered online from http://inderscience.metapress.com Please address subscription orders to: Inderscience Publishers (Order Dept.) World Trade Centre Building II 29 Route de Pre-Bois, Case Postale 856, CH-1215 Genève 15, SWITZERLAND Relevant Inderscience Titles International Journal of Applied Nonlinear Science International Journal of Applied Systemic Studies International Journal of Computational Materials Science and Surface Engineering International Journal of Computer Aided Engineering and Technology International Journal of Computer Applications in Technology International Journal of Dynamical Systems and Differential Equations International Journal of Human Factors Modelling and Simulation International Journal of Modelling, Identification and Control International Journal of Simulation and Process Modelling For rush orders please: fax: +41-22-7910885 or E-mail: subs@inderscience.com Please enter the following regular subscriptions to IJESMS... subscriptions (Print or Online) [delete as necessary] International Journal of Vehicle Systems Modelling and Testing International Journal of Virtual Technology and Multimedia Progress in Computational Fluid Dynamics, An International Journal These titles are part of a unique profile on: SIMULATION AND MODELLING... subscriptions (Print and Online) Total cost... For information about these titles and the substantial portfolio of journals developed by Inderscience, please visit the website at: www.inderscience.com Methods of payment overleaf
Notes for Authors and Submission of Papers Submitted papers should not have been previously published or be currently under consideration for publication elsewhere. All papers are refereed through a double-blind process. A guide for authors and other relevant information for submitting papers are available on the Submission of Papers section of the Inderscience website: please go to Author Guidelines (www.inderscience.com/guidelines) To submit a paper, please go to Submission of Papers (http://www.inderscience.com/papers) ALL PAPERS MUST BE SUBMITTED ONLINE. If you experience any problems submitting your paper online, please contact submissions@inderscience.com, describing the exact problem you experience. (Please include in your email the title of the Journal) 2013 Inderscience Enterprises Ltd ISSN: 1755-9758 (Print), ISSN: 1755-9766 (Online)