IC Card & SIM card Connector Selection Guide For more information Solution Way Co.,Ltd www.solutionway.com ydlee@solutionway.com Tel : 031-605-3800 Fax: 031-605-3801
H&V COMBO CARD CONNECTOR ---- 200 Series (SIM+MICRO SD) MSA-201 1. SIM: 8 pin / Micro SD: 8 pin 3. Dim.: 16.10L x 16.50W x 3.00H mm 4. Micro SD: Blade Switch (Normally Open) 5. Micro SD: Push-Push Type MSA-202 1. SIM: 8 pin / Micro SD: 8 pin 3. Dim.: 27.36L x 18.55W x 2.95H mm 4. Metal Cover: Hinge Type
H&V SMART CARD CONNECTOR ---- 300 Series ICC-301 ICC-312 ICC-305 4. Dim.: 28.77L x 18.97W x H mm Base Stopper Total H 1.30 2.20 1.55 0.90 2.45 2.00 2.90 ICC-303 2. SMT type (with post) 4. Dim.: 28.70L x 17.50W x H mm Base Stopper Total H 1.40 2.30 2.50 3.40 3.00 0.90 3.90 3.50 4.40 4.20 5.10 4.70 0.90 / 1.10 5.60 / 5.80 4. Dim.: 21.25L x 11.18W x 2.50H mm ICC-311 4. Dim.: 22.80L x 17.65W x H mm Base Stopper Total H 2.60 1.20 3.80 2.90 1.00 3.90 ICC-325 4. Dim.: 15.70L x 16.40W x 2.60H mm ICC-313 ICC-306 2. SMT type (with post) 4. Dim.: 28.70L x 17.50W x H mm Base Stopper Total H 1.50 2.40 3.00 3.90 3.50 0.90 4.40 4.30 5.20 4.70 5.60 3. Normal or Offset Type (Offset 0.80 mm) 4. Blade Switch: Normally Open 5. Dim.: 24.00L x 18.75W x 2.75H mm 4. Dim.:15.85L x 16.50W x 3.00H mm ICC-315 4. Dim.: 16.00L x 15.55W x 3.80H mm
H&V SMART CARD CONNECTOR ---- 400 Series ICC-400 ICC-402 ICC-404 3. Dim.: 23.60L x 10.15W x 1.30H mm 3. Dim.: 11.80L x 8.70W x 2.60H mm 3. Dim.: 11.80L x 10.62W x 2.60H mm ICC-405 ICC-408 ICC-408 3. Dim.: 11.80L x 8.70W x 1.80/2.00H mm 3. Dim.: 11.70L x 8.40W x 3.00/4.50H mm 3. Dim.: 11.70L x 11.00W x 3.00/4.50H mm ICC-409 ICC-410 ICC-411 3. Dim.: 11.10L x 7.60W x 1.50/1.80/2.00/2.40/2.60H mm 3. Dim.: 11.80L x 7.50W x 5.25H mm 3. Dim.: 15.70L x 16.40W x 2.60H mm ICC-412 ICC-413 ICC-415 3. Dim.: 22.65L x 11.60W x 1.80H mm 3. Dim.: 15.85L x 16.50W x 3.00H mm 3. Dim.: 14.20L x 16.30W x 1.90H mm ICC-416 ICC-417 ICC-421 3. Dim.: 17.55L x 16.50W x 2.00H mm 3. Dim.: 10.70L x 15.60W x 3.00H mm 3. Dim.: 15.70L x 16.40W x 2.60H mm
ICC-422 Type1 ICC-422 Type2 ICC-423 3. Dim.: 13.90L x 16.30W x 2.20/2.40/2.60H mm 3. Dim.: 13.90L x 16.30W x 2.20H mm 3. Dim.: 13.90L x 16.30W x 1.80H mm ICC-425 ICC-426 ICC-427 3. Dim.: 14.90L x 16.30W x 1.90H mm ICC-428 3. Dim.: 18.70L x 16.50W x 2.60H mm 4. Metal Cover: Hinge Type ICC-429 3. Dim.: 15.70L x 16.40W x 2.80H mm ICC-430 3. Dim.: 12.10L x 16.40W x 2.80H mm 3. Dim.: 14.20L x 16.30W x 1.90H mm 3. Dim.: 15.30L x 16.50W x 1.65H mm ICC-431 ICC-432 ICC-432 3. Dim.: 13.90L x 16.30W x 2.40/2.60H mm 3. Dim.:13.90L x 16.30W x 2.20H mm 3. Dim.:13.90L x 16.30W x 2.80H mm ICC-433 ICC-435 ICC-436 3. Dim.: 15.30L x 16.50W x 1.65H mm 3. Dim.: 19.15L x 16.50W x 1.60H mm 3. Dim.: 18.70L x 16.60W x 2.60H mm 4. Metal Cover: Hinge Type
ICC-437 ICC-438 ICC-438 3. Dim.: 15.70L x 16.40W x 4.50H mm 4. Standoff= 1.90 mm 3. Dim.: 10.30L x 15.65W x 2.40H mm 3. Dim.: 10.30L x 15.65W x 2.90H mm ICC-439 ICC-450 ICC-451 3. Dim.: 15.70L x 16.40W x 4.80H mm 4. Standoff= 2.20 mm 3. Dim.: 15.70L x 16.40W x 4.50H mm 4. Standoff= 1.90 mm 3. Dim.: 15.10L x 16.70W x 4.75H mm 4. Standoff= 2.30 mm ICC-452 ICC-453 ICC-455 3. Dim.: 13.95L x 16.30W x 2.10H mm 3. Dim.: 14.35L x 17.30W x 2.45H mm (Dual SIM Type) 3. Dim.: 17.50L x 17.50W x 3.05H mm ICC-458 ICC-459 ICC-468 3. Dim.: 13.46L x 16.30W x 1.90H mm 3. Dim.: 10.00L x 7.60W x 1.20/1.40H mm 3. Dim.: 9.40L x 16.40W x 2.90H mm ICC-469 ICC-478 ICC-480 ICC-480 3. Dim.: 11.10L x 7.60W x 1.50H mm 3. Dim.: 13.00L x 16.30W x 1.80H mm 3. Dim.: 13.95L x 8.50W x 0.50/0.70/0.90H mm 3. Dim.: 13.95L x 11.00W x 0.50/0.70/0.90H mm
H&V SIM CARD ACCEPTOR ---- 500 Series ICA-503 ICA-510 ICA-580 3. Dim.: 25.50L x 17.20W x 2.50H mm ICA-505 3. Dim.: 25.50L x 19.70W x 2.50H mm 4. Push Type: with a push bar ICA-506 3. Dim.: 29.85L x 17.30W x 1.80H mm 4. Plastic Cover: Hinge Type ICA-508 3. Dim.: 27.55L x 18.70W x 1.90H mm 4. Metal Cover: Push Push Type ICA-509 3. Dim.: 25.50L x 17.70W x 1.95H mm 4. Metal Cover: Hinge Type 3. Dim.: 29.65L x 17.20W x 3.00H mm 4. Plastic Cover: Hinge Type ICA-511 3. Dim.: 25.85L x 18.10W x 1.70H mm 4. Metal Cover: Hinge Type ICA-518 3. Dim.: 27.55L x 18.70W x 1.90H mm 4. Metal Cover: Push Push Type ICA-521 3. Dim.: 29.65L x 17.20W x 2.20H mm 4. Plastic Cover: Hinge Type 3. Dim.: 29.95L x 16.20W x 2.90H mm 4. Metal Cover: Hinge Type ICA-560 4. Dim.: 29.65L x 17.20W x 3.00H mm 5. Plastic Cover: Hinge Type ICA-567 4. Dim.: 29.65L x 17.20W x 2.00H mm 5. Plastic Cover: Hinge Type ICA-568 4. Dim.: 27.55L x 18.70W x 1.90H mm 5. Metal Cover: Push Push Type
H&V SMART CARD ACCEPTOR ---- 600 Series A (Friction Technology) ------ EMV Compliant ICA-602 ICA-608 2. DIP or SMT Type (with post) 3. Sealed Switch: Normally Open 4. Dim.: 55.50L x 40.00W x 5.80H mm 2. DIP or SMT Type (with post) 4. Dim.: 55.50L x 40.00W x 5.80H mm ICA-605 ICA-606 4. Dim.: 62.60L x 30.00W x 6.80H mm 4. Dim.: 56.20L x 40.00W x 6.80H mm ICA-607 ICA-617 4. Dim.: 56.00L x 31.10W x 3.65H mm 4. Dim.: 56.00L x 31.10W x 3.65H mm ICA-610 ICA-616 2. SMT Type (with post*2 or post*4) 4. Dim.: 55.60L x 36.20W x 5.90H mm 5. Standoff=1.00 mm 3. Sealed Switch: Normally Open 4. Dim.: 56.10L x 40.00W x 6.20H mm 5. PCI Compliant
H&V SMART CARD ACCEPTOR ---- 600 Series B (Friction Technology) ICA-603 ICA-613 ICA-623 ------ EMV & NDS Compliant or Close 4. Dim.: 62.00L x 40.00W x 6.25H mm ICA-609 or Close 4. Dim.: 62.00L x 40.00W x H mm Base Standoff Total H 6.15 0.65 6.80 6.15 3.00 9.15 ICA-619 or Close 4. Dim.: 62.00L x 40.00W x 13.50H mm 5. Standoff=7.35 mm ICA-629 or Close 4. Dim.: 62.00L x 40.00W x 6.25H mm ICA-615 or Close 4. Dim.: 62.00L x 40.00W x H mm Base Standoff Total H 6.25 1.40 7.65 6.25 3.15 9.40 6.25 3.50 9.75 6.25 5.55 11.80 ICA-653 Type1 (both side) 4. Dim.: 62.00L x 40.50W x 6.25H mm ICA-659 or Close 4. Dim.: 62.00L x 40.00W x 9.15H mm 5. Standoff=3.00 mm ICA-618 or Close 4. Dim.: 62.00L x 40.00W x 6.25H mm ICA-653 Type2 (both side) 4. Dim.: 62.00L x 40.50W x H mm Base Standoff Total H 6.25 0.55 6.80 6.25 3.15 9.40 6.25 3.50 9.75 6.25 5.55 11.80 ICA-620 or Close 4. Dim.: 64.00L x 48.00W x 7.50H mm ICA-611 Base Standoff Total H 5.90 0.00 5.90 5.90 1.90 7.80 5.90 4.75 10.65 5.90 5.55 11.45 5.90 10.00 15.90, Reverse Type 4. Dim.: 61.10L x 40.00W x H mm 5. PCI Compliant or Close 4. Dim.: 62.00L x 40.00W x H mm Base Standoff Total H 6.25 7.60 13.85 6.25 14.0 20.25 ICA-612 4. Dim.: 62.00L x 40.00W x H mm Base Standoff Total H 7.55 0.00 7.55 7.55 0.65 8.20 7.55 3.00 10.55 7.55 7.35 14.90 5. With Heat-dissipation Function 1. 16 pin 2. Double row data contacts 3. DIP Type 4. Blade Switch: Normally Close (both side) 5. Dim.: 62.00L x 48.00W x 8.15H mm
H&V SMART CARD ACCEPTOR ---- 600 Series C (Friction Technology) ICA-638 Type1 ICA-638 Type2 (with PCB) 4. Dim.: 68.00L x 62.00W x 20.25H mm 5. Standoff=13.20 mm ICA-639 Type1 (with PCB) 4. Dim.: 63.00L x 40.00W x H mm Base Standoff Total H 6.25 8.75 15.00 6.25 14.70 20.95 6.25 17.00 23.25 ICA-632 (with PCB) 4. Dim.: 84.15L x 71.60W x 27.15H mm 5. Standoff=20.00 mm ICA-639 Type2 (with PCB) 4. Dim.: 71.00L x 40.00W x 23.85H mm 5. Standoff=17.60 mm ICA-669 4. Dim.: 82.00L x 62.00W x 27.25H mm 5. Standoff=20.00 mm ICA-663 (with PCB) or Close 4. Dim.: 62.00L x 40.00W x 17.75H mm ICA-673 (with PCB) or Close 4. Dim.: 62.00L x 40.00W x 17.75H mm ICA-679 (with PCB) or Close 4. Dim.: 62.00L x 40.00W x H mm Base Standoff Total H 17.65 3.00 20.65 17.65 7.35 25.00 ICA-699 (with PCB) or Close 4. Dim.: 62.00L x 40.00W x H mm Base Standoff Total H 17.75 1.40 19.15 17.75 3.15 20.90 17.75 3.50 21.25 17.75 5.55 23.30 (with PCB) 4. Dim.: 63.00L x 40.00W x H mm Base Standoff Total H 17.75 8.75 26.50 17.75 14.70 32.45 17.75 17.00 34.75
H&V SMART CARD ACCEPTOR ---- 700 Series (Landing Technology) ------ EMV Compliant ICA-700 ICA-702 1. 8, 16 pin 2. SMT or DIP Type 3. Sealed Switch: Normally Open 4. Dim.: 55.50L x 40.00W x 5.80H mm 5. Durability: 200,000 cycles min. 2. SMT or DIP Type 4. Dim.: 55.50L x 40.00W x 5.80H mm 5. Durability: 200,000 cycles min. ICA-705 ICA-703 2. SMT or DIP Type 3. Sealed Switch: Normally Open 4. Dim.: 55.50L x 40.00W x 5.80H mm 5. Durability: 500,000 cycles min. 2. SMT or DIP Type 4. Dim.: 55.50L x 40.00W x 5.80H mm 5. Durability: 500,000 cycles min. ICA-706 ICA-707 3. Sealed Switch: Normally Open 4. Dim.: 56.10L x 40.00W x 6.30H mm 5. Durability: 500,000 cycles min. 6. PCI Compliant 3. Sealed Switch: Normally Open 4. Dim.: 55.50L x 40.00W x 6.30H mm 5. Durability: 500,000 cycles min. 6. PCI Compliant
H&V SMART CARD ACCEPTOR ---- 800 Series (with FPC) ICA-803 ICA-809 2. Blade Switch: Normally Open or Close 3. Friction Technology 4. Dim.: 62.00L x 40.00W x 6.25H mm 5. FPC pitch 1.0 or 1.25 optional, L=140 mm 2. Blade Switch: Normally Open or Close 3. Friction Technology 4. Dim.: 62.00L x 40.00W x 6.25H mm 5. FPC pitch 1.0 or 1.25 optional, L=140 mm ICA-812 ICA-853 1. 16 pin 2. Blade Switch: Normally Close 3. Friction Technology 4. Dim.: 63.50L x 60.20W x 6.25H mm 5. FPC pitch 1.25, L=115 mm 2. Blade Switch: Normally Open 3. Friction Technology 4. Dim.: 62.00L x 40.00W x 6.25H mm 5. FPC pitch 1.0
H&V MEMORY CARD CONNECTOR ---- MCA Series MCA-T01 MCA-T06 ----- MICRO SD CARD CONNECTOR ----- MICRO SD CARD CONNECTOR 3. Metal Cover: Hinge Type 4. Dim.: 13.60L x 13.30W x 1.85H mm 3. Metal Cover: Hinge Type 4. Dim.: 13.60L x 13.30W x 1.85H mm MCA-T02 ----- MICRO SD CARD CONNECTOR MCA-T03 ----- MICRO SD CARD CONNECTOR 3. Push Push Type 4. Dim.: 14.00L x 15.20W x 1.88H mm MCA-S01 ----- MINI SD CARD CONNECTOR 3. Push Push Type 4. Blade Switch: Normally Open 5. Dim.: 13.80L x 16.00W x 1.80H mm MCA-P01 ----- PCMCIA CONNECTOR 1. 11 pin 3. Dim.: 21.90L x 13.15W x 2.20/2.40H mm 1. 68 pin 2. SMT Type (offset 0.30mm) 3. Grounding Lug Optional 4. Dim.: 46.50L x 6.00W x 3.30H mm
H&V FPC/FFC CONNECTOR ---- FCC Series FCC-A00 1. 04~40 pin 3. Dim.: (Pin*1)+3 L x 3.00W x 5.20H mm 4. FPC/FFC Thickness: 0.30±0.05 mm 5. Operation: Vertical Type 6. Durability: 20 cycles min. FCC-A01 1. 04~30 pin 2. SMT Type (with ground pin) 3. Dim.: (Pin*1)+3.6 L x 4.75W x 3.00H mm 4. FPC/FFC Thickness: 0.30±0.05 mm 5. Operation: Horizontal Type 6. Durability: 20 cycles min.