RS Security Co., Ltd Tel: 086755-28935596 Mobile: 08613480168583 www.szrssecurity.com Email: fiona@szrssecurity.com, Skype: Fiona_szrssecurity BB pin: 271f8b86 RS Security Co., Ltd is specialized in physical access control turnstiles; we produce waist high turnstile, full high turnstile, flap barrier, swing door and so on. Having been in this field over 10 years experience, we are now in the position to provide cost effective physical turnstile solutions. Our products are very popular both in China and oversea. So far, we have exported automatic turnstiles and gates to more than 50 countries in the world and the quantity keeps increasing. Our turnstiles are widely used in tourist scenes, construction sites, residential areas, schools, library, restaurant, bank, port and so on. We always believe that returning customers are the satisfied ones; we sincerely hope to build a long term and stable business relationship with you. Thank you!
RS Security Turnstile Catalogue Tripod Turnstile Series The full body is made of 304# stainless steel; consist of tree bars, mechanism, electric circuit, electromagnetic, hydraulic damper, led lamp and so on. It is the most economic pedestrian access control. With standard fire interface, arm can drop down for evacuation even power is not cut off when fire alarm triggered. Anti-passback, when arm rotates 60 degree, people cannot reverse back. With hydraulic damper, low impact sound and high durability: the 3 arms can rorate in one or two directions, controlled by an access control system or push button at a reception desk. Model RS 518 Specifications Features 1. housing material: 304# stainless steel, 1.5mm 2. dimension: 1200*280*980mm 3. weight: About 50 kg, arm length: 510mm 4.power voltage: AC220V, 10% pls-minus 5.motor: imported from oversea 1. Operation methods: A. entry controlled, exit free. B. entry free, exit controlled. C. both entry and exit controlled 2. hydraulic damper 3.allows one passenger to pass at a time 4. the arm will unlock when a valid signal is received 5. Interface: one standard port-rs485 6. Control panel with count and LED digital function 7. Traffic-light: A Red Cross symbol will illuminate to indicate the unit is not available for pass, and a green arrow indicate the direction of allowable passing 8. Transit speed: 25-30 persons per minute 9. Work environment: Indoor/outdoor 10.anti-panic: the tripod will drop automatically by power off or by hand to provide a clear
walkway for escape in the event of an emergency 11. Temperature: -10c-50c Tripod Turnstile Model Model Photos Specifications RS 118 304#stainless steel, 1.5mm-thick 1200x280x980mm, RS 218 304#stainless steel, 420x330x980mm, RS 218-1s 304#stainless steel, 480x520x980mm,
RS 318 304#stainless steel, 1200x280x980mm, RS 418 304#stainless steel, 1200x280x980mm, RS 518 304#stainless steel, 1200x280x980mm,
RS 618 304#stainless steel, 1200x280x980mm, RS 718 304#stainless steel, 1200x280x980mm, RS 818 304#stainless steel, 1200x280x980mm, RS 918 304#stainless steel, 1200x280x980mm,
Flap Barrier Series Full body is made of 304#stainless steel, consist of mechanism, electric circuit, motor, wing sensors, battery, led lamp, buzzer and so on. Due to its aesthetic look, it is widely installed in high-end places. With standard fire interface, wing open for evacuation even power is not cut off when fire alarm triggered. Memory can be set, swipe cards several times for group pass. Fast transit speed. Model RS 288 Specifications Features 1.housing material: 304 # stainless steel 2.dimension: 1200*300*990mm 3.weight: about 55 kg 4. arm length:285mm 5.interface : RS485 6. Power voltage: AC220 (10%more or less) V,50HZ 7. Drive voltage: 24V 1.With function of self-examine and alarms, it is convenient for users to maintain and use 2. It will raise the alarm by means of a sound or light when someone pushes in illegally. 3. The mechanism is locked until a valid open signal is received 4. Reset automatically--go signal will be cancelled if passage through is not completed within pre-set time. The standard default value is 5s. 5. Unit can be adjusted permanent open or close when power off to meet different needs. Unit can be controlled and administered by remote control 6. Transit speed:30 people/ minute ( normal close) /40 people/minute (normal open) 7. 3 pairs of IR sensors. 8.Optional items: a. material of housing ( powder coated or
304#) b. counter c. arm material: acrylic or soft wing Flap Barrier Model Model Photos Specifications RS 188 1400x300x990mm,, lane width: 600mm RS 288 1200x300x990mm,, lane width: 600mm RS 388 1400x300x990mm,, lane width: 600mm RS 488 1400x300x990mm,, lane width: 600mm
RS 588 1400x300x990mm,, lane width: 600mm RS 688 1200x300x990mm,, lane width: 600mm RS 788 1400x300x990mm,, lane width: 900mm RS 888 1200x300x990mm,, lane width: 600mm
RS 988 1400x300x990mm,, lane width: 600mm Swing Barrier Series Full body is made of 304# stainless steel, consist of mechanism, electric circuit, motor, sensors, swing barrier, led lamp, battery and so on. The swing door provides flexible passageway access control, the control width from 300-1600 mm. it has different program for pedestrian or bicycle, work with high sensitivity sensors to ensure safety of people. With standard fire interface, arm can drop down for evacuation even power is not cut off when fire alarm triggered. Model RS 616b Specifications Features 1.housing material: 304# stainless steel 2.dimension: 1400*280*980mm 3.weight: About 50kg 4.arm length: 300-600mm 5. Swing angle: 0-180 6. Power voltage: AC220 (10%more or less 7. Drive voltage: 24V 8. Interface: standard port-rs485 9. Transit speed: 30 40persons per minute 10. Working Environment: 1). Indoor/Outdoor(with a tent over) 2). Temperature: 10 below degree to 50 degree 1. With function of self-examine and alarms, it is convenient for users to maintain and use. 2. The mechanism is locked until a valid open signal is received 3. Reset automatically--go signal will be cancelled if passage
through is not completed within pre-set time. 4. Unit can be adjusted normal open or normal close when power off to meet different needs. 5. Single/double swing--- in and out can be controlled in one direction or both 6. Door will open when it is powered off, and when power is turned on swing will shut off automatically. 7. Unit can be controlled and administered by remote control Swing Barrier Model Model Photos Specifications RS 116 380x280x990mm,, arm length: 550mm-830mm RS 216 1200x280x990mm, arm length: 550mm-830mm RS 316 Diameter 168mm arm length: 550-830mm bidirectional control
RS 416 1200x280x990mm, arm length: 550mm-830mm RS 616 1400x200x990mm arm length: 300mm-450mm RS 716 1400x115x1050mm arm length: 290mm RS 816 168mm arm length: 600mm
Drop Arm Barrier Series Full body made of 304# stainless steel, consist of mechanism, electric circuit, motor, bar, sensor and so on. It is upgrading product of wing gate, with smaller casing and mechanism. It requires smaller space. With standard fire interface, arm can drop down for evacuation even power is not cut off when fire alarm triggered. Memory can be set, swipe cards several times for group pass. Fast transit speed. Model RS 1008 Specifications Features 1..Dimension: 1200*162* 1000MM 2. Length of stick: 300MM, optional range: 250-500MM 3. Weight: About 45KG 4.housing material:304# stainless steel 5. Power supply voltage: AC220±10% V,50HZ 6. Drive Motor: DC brushed motors (24V) 7. Input interface: electricity relay switch signal or 12V level signal, or 12V pulse signal with 8. Normal service life: 3 million times 9. Communication interface: RS485 10. Transit speed: 30-40 people/ minutes 11. Temperature: -10 50 1. Functions of breakdown self-checking and alarm warning, very convenient for maintenance and use. 2. operation mode of equipments can be programmed by the little button inside the main board 3. Double Anti-Pinch function from both machine structure and induction. Stops automatically if there is any block during its reposition, or electronic engine stops working in the default time. Will have its second return/reset (till it comes back to where it should be), and the force is very weak(less or equal to 2kg) 4. Sound and light alarming function: including break-in and tag alone alarming.
Drop Arm Barrier Model Model Photos Specifications RS 1008 1200x162x990mm, arm length: 300mm, range: 250-500mm bidirectional control RS 1009 1200x162x990mm, arm length: 300mm, range: 250-500mm bidirectional control Full Height Turnstile Series The full body is made of 304# stainless steel; consist of bars, mechanism, electric circuit, electromagnetic, hydraulic damper, led lamp and so on. It is pedestrian access the upgrading product of tripod turnstile. With standard fire interface, arm can be free rotation by force for evacuation even power is not cut off when fire alarm triggered. Anti-passback, with hydraulic damper, low impact sound and high durability. Model RS 996 Specifications 1. 1630x1500x2200mm
Features 2. relative humidity: 90%, no condensation 3. window: standard or customized 4. Barrier opening time: 0.2 second 5.transit speed: 30-40/minute 6.communication interface: RS485, 7.passageway width: 750mm 1. Passing direction: one-way or two-way. Several working methods available, two-way card reading, one- way card reading, the other way controlled. One-way card reading, the other way free passing. 2. Automatic reset function: when barrier is open, if people do not pass through in the prescribed time, it will lock automatically. Passing time can be adjusted. 3. unique bi-direction anti-rotation function, 4. free rotation when power off, meet the requirement of fire-fighting 5. lighting notice: passing direction indication 6. control board has counting function and LED display function (optional) 7. Control board has memory function to meet group passing. Full Height Turnstile Model Model Photos Specifications RS 996 304# stainless steel 1630x1500x2200mm bidirectional control passable on power failure
RS 997 304# stainless steel 1500x1500x2200mm bidirectional control passable on power failure RS 998 304# stainless steel 2600x1500x2200mm bidirectional control passable on power failure RS 999 304# stainless steel 2600x1500x2200mm bidirectional control passable on power failure Sliding Gate Series Full body is made of 304# stainless steel, it consists of mechanism, electric circuit, wing sensor, motor, led lamp and so on. Upgrading product of flap gate, the wing height up to 1400 from ground. Anti-crawling, anti-climbing. Mainly used in high security places. With standard fire interface, wing open for evacuation even power is not cut off when fire alarm triggered, memory can be set, swipe cards several times for group pass. Fast transit speed. Wing color, casing size and sensor number can be customized.
Model RS 1007 Specifications Features 1.housing material: 304# 2. dimension: 1400*330*990mm 3.arm length:265mm 4.weight:About 60kg 5.power supply: AC220 ±10% V/50 ±10% HZ 6. Drive Motor: DC brushed motors (24V) 1. Functions of breakdown self-checking and alarm warning, very convenient for maintenance and use. 2. Operation mode can be programmed by the little buttons inside the main board. 3. Double Anti-Pinch function from both machine structure and induction. Doors Stop closing automatically when there is movement during there position. If there is default time delay, it will have its second reposition (till the reposition is successful), and the force is very weak 4. Anti-rushing function: without having received the signal of opening up, the doors lock automatically. 5. Doors can be adjusted into synchronization (only for double-locks) 6. Automatic returning/resetting function: when the barriers open up, if people do not pass by within the time allowed, system will cancel the right of pass for this time. Sliding Gate Model Model Photos Specifications
RS 1006 304# Stainless steel 1400*330*980mm arm length:235mm RS 1007 304# Stainless steel 1400*330*980mm arm length:265mm