New installation moveit@iss+ local version We also offer an installation service for a flat fee to our customers. It is going to be a remote installation and will be carried out by an experienced moveit IT consultant. If you prefer to perform the installation by yourself or through your administrator, please make sure that the instruction manual is carefully read and followed step by step. Please note that we do not take responsibility for errors or problems that might occur if the installation have not been carried out by our IT consultant. If contrary to expectations you require technical assistance or trouble shooting in regards to the installation, we must inform you that this service will be charged. Information about expected costs can be provided from our consultant. This manual will guide you through the necessary installation process: In order to avoid any problems during and after the installation, please close all programs and restart your computer. Please log in as an administrator. Windows Vista: Please note, that before you carry out the installation of moveit@iss+ you must be signed in as user with full administrator rights. Further we recommend switching off the user account control. In case you have an anti-virus program installed on your computer, please make sure that the processes: prowin32.exe, _mprshut.exe, _mprosrv.exe are excluded from the virus check. If this is not possible, the following file endings can be excluded alternatively: *.db, *.d1, *.b1, *.lg, *.pl, *.r, *.wrx, *.log, *.bas, *.bmp, *tif and *png. Open the Windows Explorer: Select the file from your download folder (if you have the Release Version from our Download Center). Execute now the Release_45xxxx.exe. By double click on this file you start the installation. 2014 moveit Software GmbH 45.10 Page 1 of 7
In the "Installer Language" window, choose the required language for the installation: The "Welcome" window contains general information, which is important for the installation Click on the button [Next] to continue the installation. 2014 moveit Software GmbH 45.10 Page 2 of 7
Select the "Setup" option in the window "Type of installation" and continue by clicking on the button [Next]. In the window Setup Settings the point Local client must be selected. In the follow-up you can choose the language and the country of your moveit@iss+ installation. The standard paths on where moveit@iss+ is saved on your computer are shown in the line "Installation folder". If you want to use the standard paths, continue the installation by clicking on the [Next] button. These paths can be used without any problems. However if you wish to save moveit@iss+ at a different location, you can change the paths before clicking on the button [Next]. (Windows Vista: Don't use the path C:\program files\...) 2014 moveit Software GmbH 45.10 Page 3 of 7
Click on the button [Next]. ATTENTION: Depending on how the system is used, moveit@iss+ might need more space for master and user data in the future. Therefore it is very important that you have enough space available on your computer. 2014 moveit Software GmbH 45.10 Page 4 of 7
In the window Installing the progress of the installation can be considered. 2014 moveit Software GmbH 45.10 Page 5 of 7
To fully complete the installation, please click on the button "Finish". To be able to work with moveit@iss+ it is necessary to install the master data of your trading partners. You get the master data from us via CD or you will find it as download on your homepage www.moveit.at A moveit setup licence is available for you the first 5 days after the installation. Nevertheless, you should activate as fast as possible your licence. This is executed for a local installation by software protection client on your computer. You find a manual on our homepage under Support/Documentations/General Softwareprotection Client. 2014 moveit Software GmbH 45.10 Page 6 of 7
During the installation the start icon moveit@iss+ was produced at the desktop as well as in the Windows-start menu. With this icon the program can be started. For the start, please use as user and password ISS. For the daily work with moveit@iss+ we recommend to use an own user. One can create a new user under Systems/Menu/Regular users. Please check if there are new Updates (program and master date) available on our homepage www.moveit.at and also install them. Pay attention that all updates must be installed completely and in correct order. The respective fewest program version is noted directly by the update or the adaption. The installation of program updates and master data adaptations are always executed by the same routine. One find the information in our manuals Update from a local moveit@iss+ version and Installation manual Internorm master data. 2014 moveit Software GmbH 45.10 Page 7 of 7