TRANSAS DP SIMULATOR
A NAVI-TRAINER PROFESSIONAL MODULE The maritime industry faces a rapid increase in its need for certified Dynamic Positioning Operators (DPOs). This creates a demand for DPO training according to the Nautical Institute and DNV SeaSkill training schemes. The DP simulator plays a vital role in this training: with the highest level of Nautical Institute simulator training significantly reducing supervised DP watch-keeping time on board. This reduction is an attractive operational and financial factor for many operator companies. COMPLIANCE Transas DP simulator meets and exceeds the requirements of both Nautical Institute and DNV SeaSkill schemes for DPO certification. Regardless of level and type of operation, Transas has the solution. SIMULATED DP SYSTEMS Using the Transas universal DP interface, many of the key DP brands can be interfaced to a high level including data transfer of multiple sensors, position reference systems, thrusters and power management, all meeting the different class society s requirements. To date, Transas has successfully connected the following DP brands to NTPRO: General Electrics Marine Technologies NAVIS Rolls Royce. 2
INSTRUCTOR CAPABILITIES DP training focuses significantly on operational procedures for adverse events, which are complex and dangerous to train at sea. Transas has developed a dedicated Instructor DP Panel for monitoring and introducing of faults to the DP related equipment. The instructor can introduce faults and errors for any equipment, including frozen pitch, poor GPS coverage, low UPS battery and even blackouts. All parameters are recorded in a log file for debriefing and playback which also may include audio and video recording of the trainees actions. VISUAL SYSTEM NTPRO 5000 is renowned for its unrivalled visual realism. Many of the DP operations occur in close proximity to other vessels and structures. Transas has paid special attention to this, creating a wide range of highly detailed DP and offshore objects, such as SPMs, TLPs, SPARs, Drillships and FPSO s. Visual thruster wakes and dynamic shadows give the trainee valuable feedback during critical operations. Correct and realistic visual effects are important in training, not least for increasing awareness among the trainees. Both DNV and the Nautical Institute require visual scenes for Class A and B simulators (NI requirements for Class B come into force in 2014). 3
CONFIGURATION: THREE LEVELS OF DP BRIDGES To make things easy, Transas has created three DP packages that correspond to the three DP simulator simulator classes set by DNV and the Nautical Institute. The packages can be equipped with any of the supported DP brands, and the simulator can operate different brands at the same time. The suggested levels are only for guidance, customiced solutions are always available to meet the needs of your organisation. Additionally, add on solutions for existing simulators are available. CLASS A CONFIGURATION For sea time reduction courses This full mission DP2 bridge configuration is designed for Sea Time reduction courses (Class A) task rehearsals and resource management training. It includes both extensive horizontal and vertical visual view, physical controls for all thrusters and rudders, all relevant navigational equipment like ARPA/Radar, ECDIS and communication equipment. It also contains operator interfaces for the Positioning Reference Systems and a Joystick Backup System. The bridge can be designed as a forward and/or aft looking bridge to accommodate the intended operations. Layout example of a Class A Full Mission Bridge including Anchor Handling functionality CLASS B CONFIGURATION For advanced/simulator courses This configuration is primarily used for the Advanced/simulator course (Class B). A bridge solution is set up in a ship-like manner with a visual scene accommodating the intended DP operations. The instructor controls the scenarios from the Instructor station where faults, errors and environmental conditions are set. Layout example of a Class B bridge 4
CLASS C CONFIGURATION For basic/induction courses This configuration is mostly used for Basic/ Induction and DP familiarization (Class C). A desktop solution preferably located in a classroom. The trainees operate independently from each other. The standalone trainee workstation includes DP screen, control panels and PCs depending on DP brand. Layout example of a Class C classroom COMBINED CLASS C & B CONFIGURATION This configuration is a cost effective solution that can be used for both Basic/Induction and the Advanced/Simulator course. The DP workstations can be configured to be DP1 or DP2 stations. Example: if the training center has 6 DP1 stations, they can use those stations to create 3 x DP 2 work places. The classroom will be equipped with the typical Class B related equipment for the simulator course. The same equipment can also be used during the Basic course thus creating a more stimulating trainee environment. Layout example of a combined Class C & B bridge 5
POSITIONING REFERENCE SYSTEMS NTPRO 5000 simulates several absolute and relative reference systems Laser Radar Microwave Radar HPR (USBL/SSBL & LBL) DGPS GLONASS. All DP and Offshore related objects are fitted with relevant reflectors for the respective reference system. The position of the reflectors can be adjusted by the instructor. The simulator bridge can also be fitted with Operator Interfaces for the reference systems. DP OWN SHIP MODELS To be able to perform the required DP operations, Transas offers a wide range of high fidelity DP own ship models with different propulsion and configurations, including: PSVs AHTSs MPSVs Shuttle Tankers Semi Submersibles. Cruise ships Cargo vessels Transas and our DP partners are always available to respond to requests for cost-effective implementation of new DP models. 6
ADDITIONAL OFFSHORE FUNCTIONALITIES As NTPRO 5000 is the common platform for all bridge operation modules, Transas customers can include additional functionalities such as Anchor Handling, Cargo Transfer, Oil Spill Response and Ice Operations to their simulator, and training curriculum at any time. TRAINING CONSULTANCY SERVICES A simulator often represents a significant investment that needs to generate an income. To speed up the return on investment, Transas offers full support packages with lesson plans, exercises, Powerpoint presentations and instructor training for different kinds of training including Dynamic Positioning and Anchor Handling. Typical support packages: Nautical Institute accreditation support Class Society certification support Local program approvals Transas training consultants have significant DP and Anchor Handling training, course administration and Nautical Institute technical auditing experience. 7
GLOBAL Transas Marine International. Phone: +46 31 769 56 00. E-mail: info@transas.com ASIA Transas Marine Limited India. Phone: +91 22 2876 3900. Email: tind@transas.com Transas Marine Pacific Pte Ltd. (Singapore). Phone: +65 627 10 200. E-mail: info.asia@transas.com Transas China. Phone: +86 21 3329 6750. E-mail: info.china@transas.com MIDDLE EAST & AFRICA Transas Middle East DMC Est. Phone: +97 14 357 3625. E-mail: tme@transas.com AMERICAS Transas USA Inc. Phone: +1425 486 2100. E-mail: sales@transasusa.com Transas Latin America (Argentina). Phone: +54 11 4790 8569. E-mail: latam@transasusa.com MEDITERRANEAN Transas Mediterranean SAS (France). Phone: +33 4 89 86 4100. E-mail: med-sales@transas.com Transas Mediterranean SAS - Italian branch. Phone: +39 010 3200 576. E-mail: info-it@transas.com EUROPE Transas Marine GmbH (Germany). Phone: +49 40 890 6660. E-mail: info@transas.de Transas Scandinavia (Sweden). Phone: +46 31 769 56 00. E-mail: sales@transas.se Transas Denmark. Phone: + 45 3253 8000. E-mail: sales@transas.se Transas Marine (UK) Ltd. Phone: +44 2392 674 000. E-mail: tmuk.sales@transas.com Transas Benelux (the Netherlands). Phone: +31 10 4285599. E-mail: benelux@transas.com Transas Hellas Ltd. (Greece). Phone: +30 210 899 5164. E-mail: hellas@transas.com Transas Black Sea (Turkey). Phone: +90 216 337 0852. E-mail: blacksea@transas.com Transas Ukraine Ltd. Phone: +380 512 507116. E-mail: blacksea@transas.com Transas Marine Poland. Phone: +48 58 774 7283. E-mail: sales@transas.de Transas Baltic SIA (Latvia). Phone: +371 6 716 2100. E-mail: baltic@transas.com RUSSIA & CIS Transas Navigator (Russia). Phone: +7 812 325 31 31. E-mail: trn@transas.com OTHER COUNTRIES Find your local distributor at www.transas.com/distributors 2014 Transas MIP Ltd. All rights reserved. Ref. No. 90005271