ENGINE ROOM SIMULATOR (ERS 4000)

Transcription

1 ENGINE ROOM SIMULATOR (ERS 4000)

2 Engine Room Simulator ERS 4000 The Engine Room Simulator 4000, developed by Transas, is a maritime simulator meant for the education, training and assessment of engine department personnel, including officers in charge of watch, second and chief engineers. ERS 4000 meets the requirements of the STCW 95 Convention and Code. The simulator s scope of training objectives corresponds to the specifications of standard competence for engine department personnel as to Chapter III of STCW 95, IMO Model Courses 2.07; 2.08; 7.02; 7.04; and facilitates marine engineering training at the operational, management and support levels. It is certified by Det Norske Veritas as Class A Simulator. s of Training The high level of physical and behavioral realism of the ERS 4000 creates a professional environment for the following types of marine engineering training: Familiarisation and education Standard operation and watch keeping Advanced operation and troubleshooting. Areas of Application Education Basic physical and technical knowledge Engine room equipment familiarisation System layout and flow diagrams Control, Automation, Alarm and Safety systems Operational instructions Watch keeping procedures Training Updating of seagoing engineering personnel Educating specialists from other related qualifications Refresher courses Assessment of Competence Issue of qualification certificates Diploma revalidation and qualification Demonstration of professional competence The wide application capabilities of the Transas ERS 4000 simulator make it the ideal solution for maritime colleges and academies, training centres, shipping companies, maritime authorities and crewing agencies. Configuration Propulsion plant ERS 4000 Solo Single-PC Desktop System Designed for self-education, equipment familiarisation and knowledge refresher training Run on standalone PC Off-line Instructor functions include Exercise Editor and Debriefing Single-PC desktop system ERS 4000 Network PC-based Simulator Class Designed for group and team training Instructor control and monitoring Up to 12 interactive Trainee workstations ERS 4000 Full-mission Real Engine Room Consoles supplied with the Trainee Workstation: Designed for professional hands-on simulator training, including advanced operation and troubleshooting tasks Real simulated consoles with built-in monitoring and control panels Panels are available for Ship s Diesel Propulsion Plant with Auxiliary systems and machinery and for Ship s Electric Power Plant. Full interaction between simulator software and hardware Any combination of ERS 4000 Network and Full-mission workstations. ERS class Network workplace configuration is flexible and could be adjusted according to the training requirements ERS full mission 2 3

3 Trainee Workstation Engine Room Simulator ERS 4000 Propulsion Plant The set of equipment simulated in ERS 4000 complies with the modern standard accepted for ships diesel and steam turbine plants. To fully meet the engineering training requirements of its customers, Transas has simulated three of the most widespread types of ship s propulsion plant, including: Two-stroke slow-speed diesels: MAN B&W 6S60MC, MAN B&W 10K98MC, Wartsila-Sulzer 6RTA58 with a fixed pitch propeller Four-stroke medium-speed diesel of the SEMT Pielstick 16 PC2.2V-400 type with a controllable pitch propeller Four-stroke high-speed diesel of the Caterpillar 3508 TA type with reversible reduction gear and fixed pitch propeller Steam turbine cross-compound, double reduction geared (Kawasaki UA-400 as prototype) Electric Power Plant The Ship s Electric Power Plant incorporated in ERS 4000 includes the main switch board and control panels for dieselgenerators, shaft-generator, turbo-generator, emergency diesel-generator, shore supply, consumers, synchronising, automatic and manual control modes, alarm and safety system. The simulator imitates the actual dynamics of the transition processes, allowing the trainee to acquire the appropriate operation skills. Simulated Systems Include Diesel Generators Shaft Generator Turbo Generators Shore Supply Emergency Generator Sections of Main Switch Board and Emergency Switch Board Consumers, feeders, earth monitoring, etc. Emergency switch board Simulated Systems Include Systems providing operation of propulsion complex United mimic diagram of systems with machinery and units parameterisation functionality ERS 4000 incorporates an up-to-date simulated ship alarm system with visual and acoustic signals and automatic logger, as well as a powerful safety system with slowdown and shutdown functions and Dead Man system and Dead Man system. These systems are essential for the training of emergency situations and equipment failures on all types of engine room equipment. Turbo Generator General Cargo 2 main engine control Main switch board Fuel oil supply system SCSW of Tanker LNG Auxiliary Systems The extensive range of Auxiliary systems and Machinery subsystems modeled in ERS 4000 meets the ever growing requirements set forth for marine engineering simulator training. The set of Auxiliary Systems and mechanisms is compliant with MARPOL and SOLAS requirements. Simulated Systems Include Steering Gear Ballast System Sewage Treatment System Incinerator Steam Plant Fire systems Bilge Systems Refrigeration Systems, etc. Incinerator Ballast system 4 5

4 Engine Room Simulator ERS 4000 Virtual Reality Engine Room The 3D Engine Room is an innovative module included in the Transas ERS 4000 simulator. With this module, simulator users can solve the following training tasks: 3-D virtual reality of the Engine Room area for familiarisation support Standard and Advanced operation, including troubleshooting System mimic diagrams and local control places Familiarisation with Engine Room sounds Ship s diesel propulsion plant Hardware Controls To simulate the vessel interior with greater realism and thus further improve the efficiency of training, ERS 4000 can be supplied with full-size control consoles comprising built-in monitoring and control panels, as well as computers. The hardware consoles included in ERS 4000 imitate: Integrated Engine Control Room control desk Main Switchboard and Emergency Switchboard of the Ship s Electric Power Plant Engine Room local control places Monitoring and control panels ensuring the inspection of the majority of simulator systems and their control Alarm panels Sounds and noises of all the major engine room devices, as well as alarm sound signals Sound & Visual Alarm Unit. ERS 4000 transmits the complete set of alarm signals to this newly-implemented device External equipment may be connected to create customized controls configuration through universal hardware interface. All sets of real consoles supplied with ERS 4000 are provided with built-in computers connected to a lo cal network, which ensures the full interactivity between all the components of the simulator. Ship s electric power plant Main switchboard 6 7

5 Engine Room Simulator ERS 4000 Instructor Station ERS 4000 is an excellent tool for carrying out professional education, training, and knowledge assessment of ship s engineers, under the supervision of an Instructor. Advanced exercise monitoring and analysis functions of the simulator s Instructor Station make ERS 4000 applicable for training tasks of practically any level of complexity. Up to 12 interactive Trainee Stations can be controlled from a single Instructor Station. Exercise Editing Generation of new exercises Editing of existing exercises Access to existing and creation of new training scenarios Transas is able to provide courseware packages according to SRCW 95 requirements On-line Class Exercise monitoring, on-line control of a class network Introduction of equipment faults, changing preset exercise parameters in the on-line mode Recording of all the events at Trainee workstations Various ship models could be appointed for different trainees at the same time; the task could be appointed for individual, team and crew training Debriefing Post-exercise analysis of trainee performance Replay of recorded exercises in real, fast and slow time or in the step-by-step mode Competence Assessment Instructor place A set of standard tests on maritime qualifications for competence assessment exercises Results database for training statistics The ERS 4000 Instructor Station incorporates the following equipment: Dual-head computer LAN server Color printer Projector. Training of bridge personnel Integration with Navigational Simulator Using the open architecture and modular design structure of its simulator systems, Transas has allowed for the integration of the ERS 4000 and NTPRO 4000 shiphandling simulator into a single interactive training environment. The combined training of engineering personnel and deck officers in a single exercise solves the following tasks: Training of efficient and well-coordinated cooperation between the engine room and bridge crews as it is onboard the real ship Understanding of the complexity of all onboard equipment and interactions Training of emergency situations Advanced equipment familiarisation necessary due to the increased level of automation on board ships, where modern engine monitoring and control devices are installed on the bridge (in accordance with the IMO Watch 1 standard) Such integrated training is now increasingly demanded by: Maritime training centres and schools, where dual qualifications (watch officer/engineer) are available Shipping companies training their crews onboard and ashore Advanced shiphandling simulator courses designed for crews of vessels with an A1/A2 automation class Instructor station Instructor slave monitor Training of engine room personnel 8 9

6 ERS 4000 Available Ship Models Dry-Cargo /Container Ship Multipurpose dry-cargo vessel/container ship of 12,000 DWT, carrying general cargo, 20 and 40 containers. Main engine: two-stroke low-speed reversible turbo charged diesel engine with fixed pitch propeller. RO-RO Ro-Ro vessel of 5,000 DWT, with a four-stroke medium-speed non-reversible turbo charged diesel engine and controllable pitch propeller. Engine Room Simulator ERS 4000 ERS 4000 incorporates the library of ship models with the most widespread types of propulsion plant. The model library is constantly growing. Customised models can be developed on demand, given that a customer provides the necessary technical data on the vessel s engine room equipment. The following Ship Models are available now: Length o.a., m Breadth mld, m Draught at design WL, m 7.50 Deadweight at SLM, t 12,000 Speed in full load, kn 19.1 Man B&W 6S60MC Cylinder bore, mm 600 Piston stroke, mm 2292 No. of cylinders 6 MCR, kw 12,240 Corresp. Engine speed, rpm 105 blades 4 Length o.a., m Breadth mld, m Draught at design WL, m 6.30 Deadweight at SLM, t 5,000 Speed in full load, kn 16.6 S.E.M.T. Pielstick 16 PC2.2 V-400 Cylinder bore, mm 400 Piston stroke, mm 460 No. of cylinders 16 MCR, kw 5,966 Corresp. Engine speed, rpm 520 CPP blades 4 General Cargo-2 Multipurpose general cargo-containership of DWT, having a two-stroke reversible low-speed turbo charged diesel, and direct transmission to a fixed pitch propeller. LNG Tanker LNG tanker of 76,000 DWT, with a steam turbine as the main engine, driving a fixed pitch propeller via a turning gearbox. Oil Tanker Oil tanker of 60,500 DWT, with a two-stroke low-speed reversible turbo charged diesel engine and fixed pitch propeller. The Auxiliary systems: Oily Water Treatment System & Incinerator added according to MARPOL requirements. Length o.a., m Breadth mld, m Draught at design WL, m 7.50 Deadweight at SLM, t 12,000 Cargo holds capacity, m Speed in full load, kn 19,1 Wartsila-Sulzer RTA58 Cylinder bore, mm 580 Piston stroke, mm 2416 No. of cylinders 6 MCR, kw 12,750 Corresp. Engine speed, rpm 105 MEP, bar 19 blades 4 Length o.a., m Breadth mld, m Draught at design WL, m Deadweight at SLM, t 76,134 Cargo tanks, m3 137,585 Speed in full load, kn 19,5 Kawasaki UA-400 Output MCR, kw 29,450 Output NCR, kw 25,040 / 85,3 R.P.M. Steam conditions at inlet 57,4 bar, 515 oc Condenser vacuum at top (pump cooling) 722 mmhg Vac. at M.C.R. Superheated steam 61,5 bar / 515 oc / 63,500kg/h at M.C.R. condition Length o.a., m Breadth mld, m 32.2 Draught at design WL, m Deadweight at SLM, t 67,980 Speed in full load, kn 13,6 MAN B&W 6S60MC Cylinder bore, mm 600 Piston stroke, mm 2,292 No. of cylinders 6 MCR, kw 12,240 Corresp. Engine speed, rpm 105 blades 4 Container Ship Containership of 83,105 DWT with a two-stroke reversible lowspeed turbo charged diesel with fixed pitch propeller. Length o.a., m Breadth mld, m 40.0 Draught at design WL, m 13.3 Deadweight at SLM, t 83,105 Speed in full load, kn 24.9 MAN B&W 10K98MC Cylinder bore, mm 980 Piston stroke, mm 2660 No. of cylinders 10 MCR, kw 57,200 Corresp. Engine speed, rpm 94 blades 4 Fishing Trawler with a four-stroke high-speed turbo charged diesel engine, reversible reduction gear and fixed pitch propeller. Length o.a., m 24.5 Breadth mld, m 6.31 Draught at design WL, m 3.25 Deadweight at SLM, t 250 Speed in full load, kn 11 CATERPILLAR 3508 TA Cylinder bore, mm 170 Piston stroke, mm 190 No. of cylinders 8 MCR, kw 526 Corresp. Engine speed, rpm 1,200 blades

7 TRANSAS WORLD-WIDE DISTRIBUTORS AND SERVICE NETWORK TRANSAS INTERNATIONAL HEADQUARTERS tel.: +353 (0) fax: +353 (0) information@transas.com internet: Copyright 2008, Transas Ltd. All rights reserved.