Miklós BALOGH Curriculum Vitae



Similar documents
Bachelor thesis: Simulation of NMR measurements Supervisor: László Balázs, PhD

COMPUTATIONAL SIMULATION OF AIR

O.F.Wind Wind Site Assessment Simulation in complex terrain based on OpenFOAM. Darmstadt,

Largo Casteldelfino 21, Torino (Italy) (39-11) (39) Skype scotch_80

Victoria SINCLAIR Curriculum vitae

UNIVERSITY OF MODENA & REGGIO EMILIA

Tutorials from CAD through CFD for Beginners

Performance Comparison of a Vertical Axis Wind Turbine using Commercial and Open Source Computational Fluid Dynamics based Codes

THE CFD SIMULATION OF THE FLOW AROUND THE AIRCRAFT USING OPENFOAM AND ANSA

2013 Code_Saturne User Group Meeting. EDF R&D Chatou, France. 9 th April 2013

ME6130 An introduction to CFD 1-1

Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology

ANALYSIS OF THUNDERSTORM CLIMATOLOGY AND CONVECTIVE SYSTEMS, PERIODS WITH LARGE PRECIPITATION IN HUNGARY. Theses of the PhD dissertation

Problem Statement In order to satisfy production and storage requirements, small and medium-scale industrial

Coupling micro-scale CFD simulations to meso-scale models

THEORIES AND APPLICATIONS IN GEOMATHEMATICS Selected studies of the 2012 Croatian-Hungarian Geomathematical Convent, Opatija

NUMERICAL SIMULATION OF FLOW FIELDS IN CASE OF FIRE AND FORCED VENTILATION IN A CLOSED CAR PARK

Hong Kong Observatory Summer Placement Programme 2015

Numerical Calculation of Laminar Flame Propagation with Parallelism Assignment ZERO, CS 267, UC Berkeley, Spring 2015

Research and Education in the Field of Wind Energy at the Technical University of Denmark

Computational Modeling of Wind Turbines in OpenFOAM

Including thermal effects in CFD simulations

Action 9.2/Part II. Stijn Vranckx, Peter Vos VITO

Titelmasterformat durch Klicken bearbeiten

The influence of mesh characteristics on OpenFOAM simulations of the DrivAer model

Titelmasterformat durch Klicken bearbeiten

Curriculum Vitae. PERSONAL INFORMATION Zsanett Kopecskó

CFD modelling of floating body response to regular waves

Wind resources map of Spain at mesoscale. Methodology and validation

CCTech TM. ICEM-CFD & FLUENT Software Training. Course Brochure. Simulation is The Future

Self Financed One Week Training

EARTH SYSTEM SCIENCE ORGANIZATION Ministry of Earth Sciences, Government of India

The ADREA-HF CFD code An overview

BBIPED: BCAM-Baltogar Industrial Platform for Engineering design

Computational Fluid Dynamics Research Projects at Cenaero (2011)

(1) 2 TEST SETUP. Table 1 Summary of models used for calculating roughness parameters Model Published z 0 / H d/h

COMPUTATIONAL FLUID DYNAMICS USING COMMERCIAL CFD CODES

CFD Grows Up! Martin W. Liddament Ventilation, Energy and Environmental Technology (VEETECH Ltd) What is Computational Fluid Dynamics?

Overset Grids Technology in STAR-CCM+: Methodology and Applications

Peter C. Chu. Distinguished Professor and Chair Department of Oceanography Naval Postgraduate School Monterey, CA PROFESSIONAL HISTORY

PhD Program in Cancer and Immunology

Modeling of Earth Surface Dynamics and Related Problems Using OpenFOAM

How To Calculate Wind Loading

A Curriculum Vitae. The Differences between a Resume and a CV

HYBRID ROCKET TECHNOLOGY IN THE FRAME OF THE ITALIAN HYPROB PROGRAM

Open Source CFD Solver - OpenFOAM

LSCFD: Meshing Tools for Open Source CFD A Practical Point of View

Graduate Certificate Program in Energy Conversion & Transport Offered by the Department of Mechanical and Aerospace Engineering

Keywords: CFD, heat turbomachinery, Compound Lean Nozzle, Controlled Flow Nozzle, efficiency.

HPC Deployment of OpenFOAM in an Industrial Setting

Simulation to Analyze Two Models of Agitation System in Quench Process

Project Title: Quantifying Uncertainties of High-Resolution WRF Modeling on Downslope Wind Forecasts in the Las Vegas Valley

SGI HPC Systems Help Fuel Manufacturing Rebirth

Fresh Ideas, New Frontiers

How To Run A Cdef Simulation

CFD Based Air Flow and Contamination Modeling of Subway Stations

ACADEMIC EDUCATION PROFESSIONAL CAREER

OpenFOAM Opensource and CFD

CFD Analysis Of Multi-Phase Flow And Its Measurements

Computational Fluid Dynamics or Wind Tunnel Modeling?

Çankırı Karatekin University, Çankırı, Turkey. Lecturer of Refrigeration and Air Conditioning Engineering Technology Program of College

Jill C. Trepanier Assistant Professor Department of Geography and Anthropology Louisiana State University Curriculum Vitae PS36 Format 10/4/13

CFD software overview comparison, limitations and user interfaces

Pedro Valente PERSONAL INFORMATION. Date of Birth: 27 of March Home address: R. da Casquilha 16, 6Dto, Lisbon, Portugal

Geography. Curriculum Glance Cards

Multiphase Flow - Appendices

Customer Training Material. Lecture 2. Introduction to. Methodology ANSYS FLUENT. ANSYS, Inc. Proprietary 2010 ANSYS, Inc. All rights reserved.

Eu-NORSEWInD - Assessment of Viability of Open Source CFD Code for the Wind Industry

CFD Analysis of Application of Phase Change Material in Automotive Climate Control Systems

E N G I N E E R I N G E X C E L L E N C E. Tunnel ventilation

Aerospace Engineering & Aviation Technology

Fully Automatic Hex Dominant Mesher. Paul Gilfrin Sharc Ltd

HPC enabling of OpenFOAM for CFD Applications 25 th 27 th March 2015 CINECA Casalecchio di Reno, Bologna

Numerical Simulation of the External Flow Field. Around a Bluff Car*

School Presentation. Raffaele Ponzini SuperComputing Applications and Innovation Department

Department of Civil Engineering Doctor of Philosophy (Ph.D.) Degree Requirements Area of Study: Water Resources Engineering

Tomasz STELMACH. WindSim Annual User Meeting 16 June 2011

Application of Numerical Weather Prediction Models for Drought Monitoring. Gregor Gregorič Jožef Roškar Environmental Agency of Slovenia

How To Understand The Behavior Of Steel

Curriculum Vitae of Robert Åke Hellström

Measurement and Prediction Technology of Cooling Capability for Hybrid Drivetrain Components. Tadashi Yamada TOYOTA MOTOR CORPORATION

CFD simulations of flow over NASA Trap Wing Model

CFD Application on Food Industry; Energy Saving on the Bread Oven

Norwegian University of Science and Technology (NTNU), Department of Energy and Process Engineering, N-7491 Trondheim, Norway

Development of Ventilation Strategy in Diesel Engine Power Plant by Using CFD Modelling

Curriculum Vitae. George Breyiannis. Mechanical Engineer, PhD

Turbulence Modeling in CFD Simulation of Intake Manifold for a 4 Cylinder Engine

2.1 CFD PROJECT PLANNING ANSYS, Inc. All rights reserved. ANSYS, Inc. Proprietary

Steady Flow: Laminar and Turbulent in an S-Bend

CFD: What is it good for?

PyFR: Bringing Next Generation Computational Fluid Dynamics to GPU Platforms

Transcription:

Miklós BALOGH Curriculum Vitae Bertalan Lajos St. 4-6. H-1111 Budapest H +36-20-360-6925 T +36-1-463-4072 u +36-1-463-3464 B baloghm@ara.bme.hu Personal data Name Date of birth Place of birth Citizenship Degree Workplace Position Licences Miklós BALOGH August 26th, 1980 Budapest (Hungary) Hungarian MSc Meteorologist BME, Department of Fluid Mechanics Assistant research fellow Car driving license (category B), Glider Pilot Licence (GPL) Experience Academic 2012- Assistant research fellow, Budapest University of Technology and Economics, Faculty of Mechanical Engineering, Department of Fluid Mechanics. 2011-2012 Research engineer, Budapest University of Technology and Economics, Faculty of Mechanical Engineering, Department of Fluid Mechanics. 2010-2011 Assistant research fellow, Eötvös Loránd University, Faculty of Science, Institute of Geography and Earth Sciences, Department of Meteorology. Industrial 2006- Projects, Research and Development. Air Quality Investigation of the Planned M0 Motorway (2006-2007) Estimation of fountain water losses under various meteorological conditions in Gyula (2008) Ventilation of the district XI. in Budapest (2008) Wind farm design and optimization in Somogy county (2010) Modeling scale-dependent meteorological and pollutant transport processes (2010-2011) MOL icore virtual laboratory development (2010-) Education 2006- PhD degree in Mechanical Engineering, Budapest University of Technology and Economics, Faculty of Mechanical Engineering, Department of Fluid Mechanics, Budapest, Hungary.

2009-2010 Research Master degree in Fluid Dynamics, Von Karman Institute for Fluid Dynamics, Environmental and Applied Fluid Dynamics Department, Sint-Genesius-Rode, Belgium. 2001-2006 MSc degree in Meteorology, Eötvös Loránd University, Faculty of Science, Institute of Geography and Earth Sciences, Department of Meteorology, Budapest, Hungary. Fellowships 2009-2010 Fellowship of the Von Karman Institute for Fluid Dynamics 2005-2006 Fellowship of Hungarian Meteorological Service 2005-2006 Scientific scholarship of ELTE, Faculty of Science Languages English BME examination centre, complex exam, general intermediate level (#744355) German BME examination centre, complex exam, general elementary level (#1613470) Understanding Speaking Writing Listening Reading Interaction Production Hungarian Native C2 C2 C2 C2 C2 English Fluent C1 C1 B2 B2 C1 German Basic B1 B1 A2 A2 B1 Self-assessment European level CEFR Research Main topic Other topic Modeling of the turbulent atmospheric boundary layer Development of turbulence models, boundary conditions, wall functions Scale adaptive porosity-drag force approach applied in urban areas Meshing and reconstructing complex terrain, urban and vegetated areas Lattice-Boltzmann simulations in porous medium (for petroleum engineering) Voxelization Model development Model validation Memberships MMT (Hungarian Meteorological Society) MTA MTB (Hungarian Academy of Sciences, Meteorological Scientific Committee), Atmosphere-Dynamical and Synoptical Subcommittee HUNAGI (Hungarian Association of Geo-information)

Honours Prize in the National Scientific Student Conference (OTDK, 2005) First prize in the scientific publication competition of ELTE TTK (2005) Computer Skills Systems Programming CFD tools CAD tools GIS tools Graphics Office Unix, Linux, Windows, HPC clusters FORTRAN, ANSI C, C++, PHP, HTML, CUDA OpenFOAM, ANSYS-Fluent, ANSYS-Gambit, StarCCM++, Palabos FreeCAD, Salome, Rhinoceros, AutoCAD VTbuilder, Quantum GIS GIMP, Inkscape, Gnuplot LaTeX, LibreOffice, MS Office Publications M. Balczó, M. Balogh, I. Goricsán, T. Nagel, J. M. Suda, and T. Lajos. Air quality around motorway tunnels in complex terrain - computational fluid dynamics modeling and comparison to wind tunnel data. Időjárás, 115(3):179 204, 2011. M. Balczó, M. Balogh, I. Goricsán, J. M. Suda, and T. Lajos. Dispersion modelling of a 9 km long section of the budapest ring motorway. In Proceedings of International Workshop on Physical Modelling of Flow and Dispersion Phenomena, 2009. M. Balogh. Repülőgépes mérések felhasználása az aladin számszerű időjárás-előrejelzési modellben. Légkör, 51(3):24 36, 2006. M. Balogh. A felszín légkör kölcsönhatások számszerűsítése kombinált talajnedvességelőrejelző modell segítségével. Légkör, 52(1):30 35, 2007. M. Balogh. Általános célú áramlástani megoldók alkalmazása a mérnöki meteorológiában és a meteorológiai feladatok megoldásában.: Az openfoam szoftvercsomag. In A.Z. Gyöngyösi and T. Weidinger, editors, Alkalmazott számszerű előrejelzés numerikus időjárási és csatolt modellek a gyakorlatban., chapter 6, pages 135 153. ELTE TTK, 2013. M. Balogh, A. Horányi, A. Z. Gyöngyösi, K. André, M. Mile, T. Weidinger, and P. Tasnádi. The ALADIN/CHAPEAU model as a new tool for education and inter-comparison purposes at the eötvös loránd university in budapest. In Tilly Driesenaar No. 58, editor, HIRLAM Newsletter, pages 107 112. HIRLAM NWP Europe, 2011. M. Balogh, A. Horányi, A. Z. Gyöngyösi, M. Mile, T. Weidinger, and P. Tasnádi. Development of a uniform model postprocessing system of the aladin chapeau model for education and comparison study, 4 2011. Poster at 21st ALADIN Workshop & HIRLAM All Staff Meeting 2011, 5-8 April 2011, Norrkoping, Sweden. M. Balogh and G. Kristóf. Automated grid generation for atmospheric dispersion simulations. In microcad 2007 International Scientific Conference, 2007. M. Balogh and G. Kristóf. Multiscale modelling approach for urban boundary layer flows. In ICUC7 Proceedings: The 7th international conference on urban climate, 2009.

M. Balogh and G. Kristóf. Fine scale simulation of turbulent flows in urban canopy layers. Időjárás, 114(1 2):135 148, 2010. M. Balogh and A. Parente. Extended formulation of an enhanced k-ε model for realizable boundary conditions. In The 6th International Symposium on Computational Wind Engineering (CWE2014), pages 382 383, 2014. 6 page long extended abstract in digital proceedings. M. Balogh, A. Parente, and C. Benocci. RANS simulation of ABL flow over complex terrains applying an enhanced k-ε model and wall function formulation. In 13th International Conference on Wind Engineering, 2011. M. Balogh, A. Parente, and C. Benocci. RANS simulation of ABL flow over complex terrains applying an enhanced k-ε model and wall function formulation: Implementation and comparison for FLUENT and OpenFOAM. Journal of Wind Engineering and Industrial Aerodinamics, 2012(104 106):360 368, 2012. I. Goricsán, M. Balczó, M. Balogh, K. Czader, A. Rákai, and Cs. Tonko. Simulation of flow in an idealised city using various CFD codes. International Journal of Environment and Pollution, 44(1 4):359 367, 2011. Kristóf G. Balogh M. Geiger J. Győri, L. and J. Horváth. I-core numerical rock and pore model. In Pál-Molnár E. Geiger, J. and T. Malvić, editors, Theories and Applications in Geomatemetics: Selected studies of the 2012 Croatian-Hungarian Geomathematical Convent, Opatija., pages 49 70. GeoLitera, 2013. G. Kristóf, N. Rácz, and M. Balogh. Adaptation of pressure based CFD solvers to urban heat island convection problem. In Proceedings of the 6th International Conference on Urban Air Quality, 2007. G. Kristóf, N. Rácz, and M. Balogh. Application of ANSYS-FLUENT for meso-scale atmospheric flow simulations. In ANSYS Conference & 25. CADFEM Users Meeting, 2007. G. Kristóf, N. Rácz, and M. Balogh. CFD analyses of flow in stratified atmosphere. In Proceedings of International Workshop on Physical Modelling of Flow and Dispersion Phenomena, 2007. G. Kristóf, N. Rácz, and M. Balogh. Atmoszférikus áramlások szimulációja, simulation of atmospheric flows. GÉP, LIX(5 6):24 25, 2008. G. Kristóf, N. Rácz, and M. Balogh. Adaptation of pressure based CFD solvers for mesoscale atmospheric problems. Boundary Layer Meteorology, 131(1):85 103, 2009. T. Lajos, M. Balczó, M. Balogh, and I. Goricsán. Többléptékű terjedési modellrendszer fejlesztése és tesztelése, development and testing of a multiscale model system. GÉP, LIX(5 6):17 19, 2008. C. Peralta, A. Parente, M. Balogh, and C. Benocci. RANS simulation of the atmospheric boundary layer over complex terrain with a consistent k-epsilon model formulation. In The 6th International Symposium on Computational Wind Engineering (CWE2014), pages 236 237, 2014. 8 page long extended abstract in digital proceedings.

N. Rácz, G. Kristóf, T. Weidinger, and M. Balogh. Simulation of gravity waves and model validation to laboratory experiments. In Proceedings of the 6th International Conference on Urban Air Quality, 2007.