Titelmasterformat durch Klicken bearbeiten
|
|
|
- Barnard Hunt
- 10 years ago
- Views:
Transcription
1 Titelmasterformat durch Klicken bearbeiten Stefan Trometer, CADFEM GmbH
2 Exploring Urban Simulation Semantic 3D City Models 3D city model of Frankfurt Generated and hosted by virtualcitysystems CityGML standard = data model NOT only visualization About building objects Regularly updated database Automated processes indispensable Urban complexity is mandatory for many fields of application (wind, climate, risk mitigation, )
3 Exploring Urban Simulation Current Fields of Application Smoke & Pollution Flooding & Tsunami Urban Air Flow Urban Simulation & Urban Blast Crowd Movement
4 Exploring Urban Simulation Current Technology Partners Smoke & Pollution Novosibirsk State University of Architecture and Civil Engineering Flooding & Tsunami Urban Air Flow Urban Simulation & Urban Blast Crowd Movement
5 Titelmasterformat durch Klicken bearbeiten Demonstrators R&D Projects
6 Urban Blast Protection Project Type Blast pressure wave propagation in urban environments (DETORBA) Funded research project (BMBF) Web-Application for model preparation Interface to ANSYS Workbench Geometry optimization for explicit simulation Automated process implementation Solver Autodyn, LS-Dyna, Apollo Optimized post-processing Result visualization in Web-Application Sensitivity & robustness analysis OptiSLang Optimization of structural members
7 Urban Air Flow Project Type High-Rise wind loading and pedestrian air flow comfort Demonstrator Measured wind profiles Cooperation with Model preparation Velocity contours at a height of 50m and 150m Pedestrian comfort at ground level
8 Turbulence Modeling in Urban Space Project Type Wind flow modeling in the vicinity of complex buildings within an urban environment PhD project of S. Valger (Prof. Fedorova) Distribution of time-averaged static pressure
9 Urban Air Quality & Climate Project Transient urban smoke development under steady-state air flow conditions Type Demonstrator Realistic fire scenario Steady-state air flow conditions Target Urban air quality & pollution Urban climate Temperature development of a roofing fire scenario modeled with additional variable transport
10 Geometry Optimization for CFD Project Type Optimizing city model geometry for individual CFD simulation Demonstrator Cooperation with Pre-optimized CityGML model export Enhancements in meshing city models using the ANSYS AIM Shrink Wrap Method Target Increasing automated meshing for urban complexity Decreasing labor for high quality CFD models
11 Implementation of Building Models (BIM) Project Type Implementation of detailed IFC BIM building models into city models Demonstrator Integration into city models for local & urban simulations Import ANSYS Workbench IFC BIM model from Architecture & Engineering Urban steady-state air flow condition and evaluation of wind loading on building windows Target Tool to create simulation models with different levels of detail based on IFC building models
12 River Flooding & Tsunami Protection Project Type River flooding & Tsunami protection in urban environments Demonstrator Submitted research proposal with subcontract for ANSYS Germany Global Tsunami risk analysis with the GFZ early warning system TRIDEC Cloud showing a forecast scenario for Singapore (Source: GFZ Potsdam) 2D model of the Elbe for river flooding scenarions (Source: TU-Dresden) 3D simulation of a Tsunami impacting a building with ANSYS Fluent
13 Urban Automotive Engineering Contact with AUDI and MAN Trucks Topics Driving simulator in virtual cities Car body design based on real street conditions (road scan) Autonomous driving Car-to-car network in urban environments Source: City of Zurich
14 Urban Crowd Movement Project Type Crowd simulation in urban environments for evacuation and major events Demonstrator Rescue Zone Cooperation with Model definition Evacuation Area Urban evacuation scenario with people based on semantic city model data of building usage Transient simulation result Result: Evacuation takes less than 6 min Rescue Zone
15 Urban Waste Heat Detection Topic Type Partners Waste heat detection by unmanned aerial vehicles Research proposal (BMWi) Hangwind Fraunhofer Morgenstadt (IAO, IOSB)
16 Questions? CADFEM GmbH Dr.-Ing. Stefan Trometer New Business Development - Digital City Marktplatz Grafing b. München Germany Tel: +49-(0) Fax: +49-(0) [email protected]
Titelmasterformat durch Klicken bearbeiten
Titelmasterformat durch Klicken bearbeiten ANSYS AIM Product simulation for every engineer Erke Wang CADFEM GmbH Georg Scheuerer ANSYS Germany GmbH Christof Gebhardt CADFEM GmbH All products involve multiple
O.F.Wind Wind Site Assessment Simulation in complex terrain based on OpenFOAM. Darmstadt, 27.06.2012
O.F.Wind Wind Site Assessment Simulation in complex terrain based on OpenFOAM Darmstadt, 27.06.2012 Michael Ehlen IB Fischer CFD+engineering GmbH Lipowskystr. 12 81373 München Tel. 089/74118743 Fax 089/74118749
Rapid Design of an optimized Radial Compressor using CFturbo and ANSYS
Rapid Design of an optimized Radial Compressor using CFturbo and ANSYS Enrique Correa, Marius Korfanty, Sebastian Stübing CFturbo Software & Engineering GmbH, Dresden (Germany) PRESENTATION TOPICS 1. Company
Vincent Constantin, CADFEM (Suisse) AG
Fast Titelmasterformat and reliable Bolt durch Assessment Klicken bearbeiten inside ANSYS Vincent Constantin, CADFEM (Suisse) AG Agenda Introduction VDI 2230 Bolt Assessment inside ANSYS Verification Examples
Simultaneous Calculation with ANSYS
Titelmasterformat Simultaneous Calculation durch Klicken with ANSYS bearbeiten Ian Godfrey, Fujitsu, Nico Nagl, Lars Krüger, CADFEM GmbH WOST 2014, Weimar, Nov. 7th Simultaneous Calculation with ANSYS
www.cadfem.de VirtualPaintShop A Virtual Process Chain for Body in White Painting
www.cadfem.de VirtualPaintShop A Virtual Process Chain for Body in White Painting ANSYS, ANSYS Workbench, Ansoft, AUTODYN, CFX, FLUENT and any and all ANSYS, Inc. brand, pr oduct, service and feature names,
Tomasz STELMACH. WindSim Annual User Meeting 16 June 2011
Developments of PHOENICS as CFD engine for WindSim Tomasz STELMACH Ltd, UK [email protected] WindSim Annual User Meeting 16 June 2011 Topics of presentation 1. - who we are, what we do 2. PHOENICS 3. GCV -
Enterprise HPC & Cloud Computing for Engineering Simulation. Barbara Hutchings Director, Strategic Partnerships ANSYS, Inc.
Enterprise HPC & Cloud Computing for Engineering Simulation Barbara Hutchings Director, Strategic Partnerships ANSYS, Inc. Historical Perspective Evolution of Computing for Simulation Pendulum swing: Centralized
Initial Design and Optimization of Turbomachinery with CFturbo and optislang
Initial Design and Optimization of Turbomachinery with CFturbo and optislang Sebastian Stübing, Gero Kreuzfeld, Ralph-Peter Müller (CFturbo) Stefan Marth, Michael Schimmelpfennig (Dynardo) page 1/21 Contents
CFD Based Air Flow and Contamination Modeling of Subway Stations
CFD Based Air Flow and Contamination Modeling of Subway Stations Greg Byrne Center for Nonlinear Science, Georgia Institute of Technology Fernando Camelli Center for Computational Fluid Dynamics, George
Bildgebende Verfahren als. Control 2011 Alexander Nolte CADFEM GmbH
Bildgebende Verfahren als Basis für die FEM-Simulation Control 2011 Alexander Nolte CADFEM GmbH CADFEM: FEM Software and Services CADFEM FEM Software & Services 25+ years experience 140+ employees 40 Mio.
Overset Grids Technology in STAR-CCM+: Methodology and Applications
Overset Grids Technology in STAR-CCM+: Methodology and Applications Eberhard Schreck, Milovan Perić and Deryl Snyder [email protected] [email protected] [email protected]
Introductory FLUENT Training
Chapter 10 Transient Flow Modeling Introductory FLUENT Training www.ptecgroup.ir 10-1 Motivation Nearly all flows in nature are transient! Steady-state assumption is possible if we: Ignore transient fluctuations
Problem Statement In order to satisfy production and storage requirements, small and medium-scale industrial
Problem Statement In order to satisfy production and storage requirements, small and medium-scale industrial facilities commonly occupy spaces with ceilings ranging between twenty and thirty feet in height.
On the use of 3D simulations in Energy and Buildings related applications
On the use of 3D simulations in Energy and Buildings related applications Dr. Cécile Goffaux Energy & Buildings Team Leader Contact: [email protected] Doc. ref.: ENB-NS-042-00 Energy & Buildings
Performance Comparison of a Vertical Axis Wind Turbine using Commercial and Open Source Computational Fluid Dynamics based Codes
Performance Comparison of a Vertical Axis Wind Turbine using Commercial and Open Source Computational Fluid Dynamics based Codes Taimoor Asim 1, Rakesh Mishra 1, Sree Nirjhor Kaysthagir 1, Ghada Aboufares
The influence of mesh characteristics on OpenFOAM simulations of the DrivAer model
The influence of mesh characteristics on OpenFOAM simulations of the DrivAer model Vangelis Skaperdas, Aristotelis Iordanidis, Grigoris Fotiadis BETA CAE Systems S.A. 2 nd Northern Germany OpenFOAM User
CCTech TM. ICEM-CFD & FLUENT Software Training. Course Brochure. Simulation is The Future
. CCTech TM Simulation is The Future ICEM-CFD & FLUENT Software Training Course Brochure About. CCTech Established in 2006 by alumni of IIT Bombay. Our motive is to establish a knowledge centric organization
E N G I N E E R I N G E X C E L L E N C E. Tunnel ventilation
E N G I N E E R I N G E X C E L L E N C E Tunnel ventilation n Tunnel ventilation know-how Ventilation is a key element of electro-mechanical equipment and is crucial to the safety of tunnel operation.
CFD STUDY OF TEMPERATURE AND SMOKE DISTRIBUTION IN A RAILWAY TUNNEL WITH NATURAL VENTILATION SYSTEM
CFD STUDY OF TEMPERATURE AND SMOKE DISTRIBUTION IN A RAILWAY TUNNEL WITH NATURAL VENTILATION SYSTEM J. Schabacker, M. Bettelini, Ch. Rudin HBI Haerter AG Thunstrasse 9, P.O. Box, 3000 Bern, Switzerland
COMPUTATIONAL SIMULATION OF AIR
CONFERENCE ABOUT THE STATUS AND FUTURE OF THE EDUCATIONAL AND R&D SERVICES FOR THE VEHICLE INDUSTRY COMPUTATIONAL SIMULATION OF AIR POLLUTION DISPERSION INDUCED BY URBAN TRAFFIC Zoltán Horváth, Széchenyi
How To Model With Cfd Using Phoenics
The Use and Application of CFD in the Air Conditioning and Fire Protection Industry AIRAH NSW February 2008 The Use and Application of CFD in the Air Conditioning and Fire Protection Industry An Introduction
ME6130 An introduction to CFD 1-1
ME6130 An introduction to CFD 1-1 What is CFD? Computational fluid dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions, and related phenomena by solving numerically
Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology
Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology Dimitrios Sofialidis Technical Manager, SimTec Ltd. Mechanical Engineer, PhD PRACE Autumn School 2013 - Industry
Fire Simulations in Civil Engineering
Contact: Lukas Arnold l.arnold@fz- juelich.de Nb: I had to remove slides containing input from our industrial partners. Sorry. Fire Simulations in Civil Engineering 07.05.2013 Lukas Arnold Fire Simulations
Customer Training Material. Lecture 2. Introduction to. Methodology ANSYS FLUENT. ANSYS, Inc. Proprietary 2010 ANSYS, Inc. All rights reserved.
Lecture 2 Introduction to CFD Methodology Introduction to ANSYS FLUENT L2-1 What is CFD? Computational Fluid Dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions,
Advanced bolt assessment through process automation
Titelmasterformat Bolt Assessment inside durch ANSYS Klicken bearbeiten Advanced bolt assessment through process automation Contents Short presentation of VDI 2230 Workflow with Bolt Assessment inside
CFD Computational Fluid Dynamics
CFD Computational Fluid Dynamics Norconsult is both highly competent and has a broad experience in the 3D simulation of fluid flows. The section for Applied Fluid Dynamics utilises CFD in a multi-discipline
BatchMeshing and CAE Data Management as Key Technologies for Six Sigma Compliant CAE Processes for LS-DYNA Simulations
5. LS-DYNA Anwenderforum, Ulm 2006 Modellierung / Prozessintegration BatchMeshing and CAE Data Management as Key Technologies for Six Sigma Compliant CAE Processes for LS-DYNA Simulations Authors: Dr.
Computational Fluid Dynamics or Wind Tunnel Modeling?
Computational Fluid Dynamics or Wind Tunnel Modeling? J.D. McAlpine, Envirometrics, Inc. CFD holds great promise for replacing the wind tunnel in coming years as the science behind CFD improves and computers
NUMERICAL SIMULATION OF FLOW FIELDS IN CASE OF FIRE AND FORCED VENTILATION IN A CLOSED CAR PARK
FACULTY OF ENGINEERING NUMERICAL SIMULATION OF FLOW FIELDS IN CASE OF FIRE AND FORCED VENTILATION IN A CLOSED CAR PARK Xavier Deckers, Mehdi Jangi, Siri Haga and Bart Merci Department of Flow, Heat and
BBIPED: BCAM-Baltogar Industrial Platform for Engineering design
BBIPED: BCAM-Baltogar Industrial Platform for Engineering design Carmen Alonso-Montes, Imanol García, Ali Ramezani, Lakhdar Remaki BCAM Basque Center for Applied Mathematics (Bilbao), Spain Motivation
DESIGN OF NATURAL VENTILATION WITH CFD CHAPTER SEVEN. Qingyan Chen. difficult to understand and model, even for simple
CHAPTER SEVEN L. Glicksman and J. Lin (eds), Sustainable Urban Housing in China, 116-123 2006 Springer. Printed in the Netherlands. DESIGN OF NATURAL VENTILATION WITH CFD Qingyan Chen INTRODUCTION As the
Layered Composite Solutions
Composite Workflow Challenges and Solutions Andreas Hübner, CADFEM (Suisse) AG René Roos, EVEN AG wind energy automobile aerospace aircraft sports & recreation Material Function Shape -2- Concept Preliminary
THE CFD SIMULATION OF THE FLOW AROUND THE AIRCRAFT USING OPENFOAM AND ANSA
THE CFD SIMULATION OF THE FLOW AROUND THE AIRCRAFT USING OPENFOAM AND ANSA Adam Kosík Evektor s.r.o., Czech Republic KEYWORDS CFD simulation, mesh generation, OpenFOAM, ANSA ABSTRACT In this paper we describe
Smart City Australia
Smart City Australia Slaven Marusic Department of Electrical and Electronic Engineering The University of Melbourne, Australia ARC Research Network on Intelligent Sensors, Sensor Networks and Information
CFD ANALYSIS CHALLENGES IN BUILDING SIMULATION FOR SIMBUILD2004 CONFERENCE. Ferdinand Schmid and Galen Burrell Architectural Energy Corporation
CFD ANALYSIS CHALLENGES IN BUILDING SIMULATION FOR SIMBUILD2004 CONFERENCE Ferdinand Schmid and Galen Burrell Architectural Energy Corporation ABSTRACT This paper discusses the capabilities and challenges
Automated Reporting and Workflow Management of LS-DYNA Simulations
3. LS-DYNA Anwenderforum, Bamberg 2004 CAE / IT III Automated Reporting and Workflow Management of LS-DYNA Simulations Author: Dr. Jochen Seybold Altair Engineering GmbH, Germany Correspondence: Dr. Jochen
Dr.-Ing. Johannes Will CAD-FEM GmbH/DYNARDO GmbH dynamic software & engineering GmbH www.dynardo.de
Some necessities and obstacles for introducing sophisticated numerical analysis into Civil Engineering and Geomechanics Dr.-Ing. Johannes Will CAD-FEM GmbH/DYNARDO GmbH dynamic software & engineering GmbH
3rd EU-Malaysia Higher Education Conference
3rd EU-Malaysia Higher Education Conference 15 Years of Cooperation between Malaysia and Germany: Case Study of the Partnership between Universiti Kebangsaan Malaysia and University of Duisburg-Essen,
The ADREA-HF CFD code An overview
The ADREA-HF CFD code An overview Dr. A.G. Venetsanos Environmental Research Laboratory (EREL) National Centre for Scientific Research Demokritos, Greece [email protected] Slide 2 Computational
How can future ICT enhance disaster relief and recovery?
Friedrich List Faculty of Transportation and Traffic Sciences Institute of transportation and economics How can future ICT enhance disaster Lubos Buzna, Limor Issacharoff, Karsten Peters, Vittorio Rosato
Eu-NORSEWInD - Assessment of Viability of Open Source CFD Code for the Wind Industry
Downloaded from orbit.dtu.dk on: Jun 28, 2016 Eu-NORSEWInD - Assessment of Viability of Open Source CFD Code for the Wind Industry Stickland, Matt; Scanlon, Tom; Fabre, Sylvie; Ahmad, Abdul; Oldroyd, Andrew;
BAFFLES AS A MEANS OF STATION PROTECTION FROM HIGH AIR VELOCITIES - COMPARISON OF ANALYTICAL AND FIELD MEASUREMENTS RESULTS
- 289 - BAFFLES AS A MEANS OF STATION PROTECTION FROM HIGH AIR VELOCITIES - COMPARISON OF ANALYTICAL AND FIELD MEASUREMENTS RESULTS Maevski Igor, PhD, PE Jacobs Engineering, USA ABSTRACT Draught relief
How is EnSight Uniquely Suited to FLOW-3D Data?
How is EnSight Uniquely Suited to FLOW-3D Data? July 5, 2011 figure 1. FLOW-3D model of Dam visualized with EnSight If you would like to know how CEI s EnSight offers you more power than other postprocessors
Graduate School of Disaster Prevention Kangwon National University. http://college.kangwon.ac.kr/prevention/main.jsp
Graduate School of Disaster Prevention Kangwon National University 1joongang-Ro Samcheok-city, Gangwon-Do, Republic of Korea http://college.kangwon.ac.kr/prevention/main.jsp Outline Natural disasters such
TechVision 2020. A SYSTEMATIC INNOVATION SERENDIPITY ENGINE Convergence Begets Innovation Begets Growth
TechVision 2020 A SYSTEMATIC INNOVATION SERENDIPITY ENGINE Convergence Begets Innovation Begets Growth Patent Activity Convergence Market Potential Funding Welcome to the Power Packed World of Top 50 Technologies
Tutorials from CAD through CFD for Beginners
Tutorials from CAD through CFD for Beginners John M. Cimbala, Professor Keith A. Martin, Graduate student Scott A. Richards, Graduate student Department of Mechanical and Nuclear Engineering, The Pennsylvania
3D-Visualization and Communication Solutions for CAE Workflows
3D-Visualization and Communication Solutions for CAE Workflows Tor Helge Hansen, Ceetron AS, Trondheim, Norway Armin Sager, Ceetron GmbH, Fellbach, Germany Stein Inge Dale, Ceetron AS, Norway Ketil Aamnes,
GEOMETRIC, THERMODYNAMIC AND CFD ANALYSES OF A REAL SCROLL EXPANDER FOR MICRO ORC APPLICATIONS
2 nd International Seminar on ORC Power Systems October 7 th & 8 th, 213 De Doelen, Rotterdam, NL GEOMETRIC, THERMODYNAMIC AND CFD ANALYSES OF A REAL SCROLL EXPANDER FOR MICRO ORC APPLICATIONS M. Morini,
ON MOST schemes, the architectural design of. Flexible strategy. Case study. The Forum
Flexible strategy ON MOST schemes, the architectural design of a building is influenced by fire engineering strategy. This could be in the form of visual, physical elements such as fire doors, fire curtains,
INITIAL ASSESSMENT OF THE IMPACT OF JET FLAME HAZARD FROM HYDROGEN CARS IN ROAD TUNNELS AND THE IMPLICATION ON HYDROGEN CAR DESIGN
INITIAL ASSESSMENT OF THE IMPACT OF JET FLAME HAZARD FROM HYDROGEN CARS IN ROAD TUNNELS AND THE IMPLICATION ON HYDROGEN CAR DESIGN Wu, Y Department of Chemical and Process Engineering, University of Sheffield,
Computational Fluid Dynamics in Automotive Applications
Computational Fluid Dynamics in Automotive Applications Hrvoje Jasak [email protected] Wikki Ltd, United Kingdom FSB, University of Zagreb, Croatia 1/15 Outline Objective Review the adoption of Computational
Adapting to Climate Change Through Asset Management Planning. Tiffany Batac David Rose, PhD Parsons Brinckerhoff
Adapting to Climate Change Through Asset Management Planning Tiffany Batac David Rose, PhD Parsons Brinckerhoff 1 2 Agenda FTA Transit Climate Change Adaptation Assessment Pilots: MARTA Study Framework
Coupling micro-scale CFD simulations to meso-scale models
Coupling micro-scale CFD simulations to meso-scale models IB Fischer CFD+engineering GmbH Fabien Farella Michael Ehlen Achim Fischer Vortex Factoria de Càlculs SL Gil Lizcano Outline Introduction O.F.Wind
Titelmasterformat durch Klicken bearbeiten
Titelmasterformat durch Klicken www.wattline.de Titelmasterformat durch Klicken WATTLINE November 2012 1 Titelmasterformat Strong Basis durch Klicken Titelmasterformat WATTLINE GmbH durch a subsidiary
THE NUMERICAL SIMULATION CONFERENCE
EXHIBITION & SPONSORSHIP PROGRAM THE NUMERICAL SIMULATION CONFERENCE ANSYS CONFERENCE & 33 rd CADFEM USERS MEETING 2015 CONVERGENCE EXHIBITION & SPONSORSHIP PROGRAM THE NUMERICAL SIMULATION CONFERENCE
AMCA International. Investigation of the Impact of Building Entrance Air Curtain on Whole Building Energy Use AIR MOVEMENT AND CONTROL
AMCA International Investigation of the Impact of Building Entrance Air Curtain on Whole Building Energy Use AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL, INC. The International Authority on Air
Miklós BALOGH Curriculum Vitae
Miklós BALOGH Curriculum Vitae Bertalan Lajos St. 4-6. H-1111 Budapest H +36-20-360-6925 T +36-1-463-4072 u +36-1-463-3464 B [email protected] Personal data Name Date of birth Place of birth Citizenship
Fully Automatic Hex Dominant Mesher. Paul Gilfrin Sharc Ltd
Fully Automatic Hex Dominant Mesher Paul Gilfrin Sharc Ltd Sharc Ltd UK About Sharc Developer of Harpoon Founded in 1997 Distributors of Ensight Engineers with CFD/FEA experience Specialise in the integration
2013 Code_Saturne User Group Meeting. EDF R&D Chatou, France. 9 th April 2013
2013 Code_Saturne User Group Meeting EDF R&D Chatou, France 9 th April 2013 Thermal Comfort in Train Passenger Cars Contact For further information please contact: Brian ANGEL Director RENUDA France [email protected]
Marine CFD applications using OpenFOAM
Marine CFD applications using OpenFOAM Andrea Penza, CINECA 27/03/2014 Contents Background at CINECA: LRC experience CFD skills Automatic workflow Reliability workflow OpenFOAM solvers for marine CFD analysis
Investigation of Turbulence Created by Formula One Cars with the Aid of Numerical Fluid Dynamics and Optimization of Overtaking Potential
Investigation of Turbulence Created by Formula One Cars with the Aid of Numerical Fluid Dynamics and Optimization of Overtaking Potential Milad Mafi Competence Centre, transtec AG, Tübingen, Germany Summary
Computer Animation and Visualisation. Lecture 1. Introduction
Computer Animation and Visualisation Lecture 1 Introduction 1 Today s topics Overview of the lecture Introduction to Computer Animation Introduction to Visualisation 2 Introduction (PhD in Tokyo, 2000,
Numerical Simulation of the External Flow Field. Around a Bluff Car*
Numerical Simulation of the External Flow Field Around a Bluff Car* Sun Yongling, Wu Guangqiang, Xieshuo Automotive Engineering Department Shanghai Tongji University Shanghai, China E-mail: [email protected]
CFD analysis for road vehicles - case study
CFD analysis for road vehicles - case study Dan BARBUT*,1, Eugen Mihai NEGRUS 1 *Corresponding author *,1 POLITEHNICA University of Bucharest, Faculty of Transport, Splaiul Independentei 313, 060042, Bucharest,
Application of FEM-Tools in the Engine Development Process
Application of FEM-Tools in the Engine Development Process H. Petrin, B. Wiesler e-mail: [email protected], [email protected] AVL List GmbH Graz, Austria Abstract The requirements for the development
September 8th 8:30 AM 10:00 AM PL1: Reinventing Policy to Support the New ITS
September 8th 8:30 AM 10:00 AM PL1: Reinventing Policy to Support the New ITS September 8th 10:30 AM 12:00 PM AM01: Sustainable Transportation Performance Measures: Best Practices September 8th 10:30 AM
CastNet: GUI environment for OpenFOAM
CastNet: GUI environment for OpenFOAM CastNet is a preprocessing system and job-control system for OpenFOAM. CastNet works with the standard OpenFOAM releases provided by ESI Group as well as ports for
City modeling and BIM in infrastructure planning
The City Rail Loop City modeling and BIM in infrastructure planning Tiina Perttula, Jukka Tarkkala 9.2.2015 1 1 The City Rail Loop Idea and goals of the City Rail Loop The majority of commuter trains to
Using CFD for optimal thermal management and cooling design in data centers
www.siemens.com/datacenters Using CFD for optimal thermal management and cooling design in data centers Introduction As the power density of IT equipment within a rack increases and energy costs rise,
Pushing the limits. Turbine simulation for next-generation turbochargers
Pushing the limits Turbine simulation for next-generation turbochargers KWOK-KAI SO, BENT PHILLIPSEN, MAGNUS FISCHER Computational fluid dynamics (CFD) has matured and is now an indispensable tool for
Full scale tunnel fire tests of VID Fire-Kill Low Pressure Water Mist Tunnel Fire Protection System in Runehamar test tunnel, spring 2009
Full scale tunnel fire tests of VID Fire-Kill Low Pressure Water Mist Tunnel Fire Protection System in Runehamar test tunnel, spring 2009 By Carsten Palle, VID Fire-Fill, www.vid.eu Presented at ISTSS
Opening the Bonnet. Prof Darren Woolf WYSINWYG 1
Opening the Bonnet Prof Darren Woolf WYSINWYG 1 WYSINWYG What You See Is NOT What You Get: Looking inside the Pandora s Box Prof Darren Woolf WYSINWYG 2 WYSIWYG implies a user interface that allows the
TwinMesh for Positive Displacement Machines: Structured Meshes and reliable CFD Simulations
TwinMesh for Positive Displacement Machines: Structured Meshes and reliable CFD Simulations 05.06.2014 Dipl.-Ing. Jan Hesse, Dr. Andreas Spille-Kohoff CFX Berlin Software GmbH Karl-Marx-Allee 90 A 10243
Statistics on Structures 3. Robustness evaluation in CAE with software optislang and Statistics on Structures Application examples New features
Statistics on Structures 3 Robustness evaluation in CAE with software optislang and Statistics on Structures Application examples New features Robustness: Definition of uncertainties Translate knowledge
Visual Sensing and Analytics for Construction and Infrastructure Management
Visual Sensing and Analytics for Construction and Infrastructure Management Academic Committee Annual Conference Speaker Moderator: Burcu Akinci, Carnegie Mellon University 2015 CII Annual Conference August
Early Fire Detection & Condition Monitoring
Early Fire Detection & Condition Monitoring Thermal Imaging Systems for Monitoring of Industrial Facilities in EX-/Non-EX-Zones Early Fire Detection of Large-Area Installations Thermal Condition Monitoring
Overview. also give you an idea of ANSYS capabilities. In this chapter, we will define Finite Element Analysis and. Topics covered: B.
2. FEA and ANSYS FEA and ANSYS Overview In this chapter, we will define Finite Element Analysis and also give you an idea of ANSYS capabilities. Topics covered: A. What is FEA? B. About ANSYS FEA and ANSYS
CastNet: Modelling platform for open source solver technology
CastNet: Modelling platform for open source solver technology. DHCAE Tools GmbH Address: Friedrich-Ebert-Str. 368, 47800 Krefeld, Germany / Company site: Alte Rather Str. 207 / 47802 Krefeld Phone +49
2.1 CFD PROJECT PLANNING. 2006 ANSYS, Inc. All rights reserved. ANSYS, Inc. Proprietary
2.1 CFD PROJECT PLANNING 2006 ANSYS, Inc. All rights reserved. 2008 ANSYS, Inc. All rights reserved. 6-2 CFD PROJECT PLANNING Task definition Resources Timing and deliverables Design review Assumed part
CFD SIMULATION OF SDHW STORAGE TANK WITH AND WITHOUT HEATER
International Journal of Advancements in Research & Technology, Volume 1, Issue2, July-2012 1 CFD SIMULATION OF SDHW STORAGE TANK WITH AND WITHOUT HEATER ABSTRACT (1) Mr. Mainak Bhaumik M.E. (Thermal Engg.)
A Response Surface Model to Predict Flammable Gas Cloud Volume in Offshore Modules. Tatiele Dalfior Ferreira Sávio Souza Venâncio Vianna
A Response Surface Model to Predict Flammable Gas Cloud Volume in Offshore Modules Tatiele Dalfior Ferreira Sávio Souza Venâncio Vianna PRESENTATION TOPICS Research Group Overview; Problem Description;
AN EFFECT OF GRID QUALITY ON THE RESULTS OF NUMERICAL SIMULATIONS OF THE FLUID FLOW FIELD IN AN AGITATED VESSEL
14 th European Conference on Mixing Warszawa, 10-13 September 2012 AN EFFECT OF GRID QUALITY ON THE RESULTS OF NUMERICAL SIMULATIONS OF THE FLUID FLOW FIELD IN AN AGITATED VESSEL Joanna Karcz, Lukasz Kacperski
Climate - Engineering Physics - Architecture - Sustainability. Matthias Schuler
Climate - Engineering Physics - Architecture - Sustainability Natural ventilation Optimal use of daylight Matthias Schuler Using Using natural natural cooling couling resources Multifuncti onal shading
HANDOUT CLIMATIC WIND TUNNEL MAHLE BEHR GMBH & CO. KG STATUS: FEBRUARY 2014
HANDOUT CLIMATIC WIND TUNNEL MAHLE BEHR GMBH & CO. KG STATUS: FEBRUARY 2014 CLIMATIC WIND TUNNEL FOR CAR, VAN AND TRUCK Location 70469 Stuttgart-Feuerbach, Germany Size Test section (L x W x H) 13 x 8.8
Experts in Computational Fluid Dynamics
Experts in Computational Fluid Dynamics TotalSim Background TotalSim is an independent CFD consultancy firm specialising in aerodynamic and hydrodynamic design and development through the use of open source
Meshing of a detailed DrivAer Body with ANSYS Meshing and ANSYS ICEM CFD
Meshing of a detailed DrivAer Body with ANSYS Meshing and ANSYS ICEM CFD Dipl.-Ing. (FH) Jan Smedseng CFX Berlin Software GmbH 030 293 811 41 [email protected] Contents DrivAer Body Geometry preparation
Cluster Scalability of ANSYS FLUENT 12 for a Large Aerodynamics Case on the Darwin Supercomputer
Cluster Scalability of ANSYS FLUENT 12 for a Large Aerodynamics Case on the Darwin Supercomputer Stan Posey, MSc and Bill Loewe, PhD Panasas Inc., Fremont, CA, USA Paul Calleja, PhD University of Cambridge,
CFD ANALYSIS OF RAE 2822 SUPERCRITICAL AIRFOIL AT TRANSONIC MACH SPEEDS
CFD ANALYSIS OF RAE 2822 SUPERCRITICAL AIRFOIL AT TRANSONIC MACH SPEEDS K.Harish Kumar 1, CH.Kiran Kumar 2, T.Naveen Kumar 3 1 M.Tech Thermal Engineering, Sanketika Institute of Technology & Management,
Geohazards: Minimizing Risk, Maximizing Awareness The Role of the Insurance Industry
Geohazards: Minimizing Risk, Maximizing Awareness The Role of the Insurance Industry Prof. Dr. Peter Hoeppe Head of Geo Risks Research Munich Re International Year of Planet Earth, Paris, 13 February 2008
Advanced discretisation techniques (a collection of first and second order schemes); Innovative algorithms and robust solvers for fast convergence.
New generation CFD Software APUS-CFD APUS-CFD is a fully interactive Arbitrary Polyhedral Unstructured Solver. APUS-CFD is a new generation of CFD software for modelling fluid flow and heat transfer in
ANSA. www.beta-cae.gr. ANSA for demanding CFD pre-processing. for demanding CFD pre-processing. Model setup. software systems. Morphing & optimization
Model setup - Specification of boundary condition types for ANSYS FLUENT, Star CD/CCM+ and UH-3D. - Complete solution setup for OpenFOAM cases, including initial and boundary condition specification, physical
Thermal Simulation of a Power Electronics Cold Plate with a Parametric Design Study
EVS28 KINTEX, Korea, May 3-6, 2015 Thermal Simulation of a Power Electronics Cold Plate with a Parametric Design Study Boris Marovic Mentor Graphics (Deutschland) GmbH, Germany, [email protected]