3-300-262-13(1) Read this first Quick Connection and Setup Guide Quick start guide to main features GB HDD Network Audio System NAS-SC55PKE 2008 Sony Corporation Printed in Malaysia
Table of Contents Checking the required items (Package contents)...3 Connecting the speakers and antennas of the GIGA JUKE Music Server...4 Setting up the Instant (S-IWS) connection...7 Connecting to the Internet...9 Selecting the display language... 11 On the GIGA JUKE Music Server... 11 On the GIGA JUKE Wireless Player... 11 Recording a CD to the HDD Jukebox of the GIGA JUKE Music Server... 12 Playing the HDD Jukebox of the GIGA JUKE Music Server... 13 Playing audio data stored on the GIGA JUKE Music Server through the GIGA JUKE Wireless Player... 14 Listening to the Internet radio on the GIGA JUKE Wireless Player... 16 Transferring audio data from the HDD Jukebox of the GIGA JUKE Music Server to a WALKMAN... 17 Troubleshooting... 19 Note on this manual In this manual, HDD Network Audio System (NAS-S55HDE) is referred to as GIGA JUKE Music Server and Wireless Network Audio System (NAS-C5E) is referred to as GIGA JUKE Wireless Player. For more information, refer to the following items: GIGA JUKE Music Server Operating Instructions for details on operations, functions and troubleshooting for the GIGA JUKE Music Server. GIGA JUKE Wireless Player Operating Instructions for details on operations, functions, Internet radio (web radio) and troubleshooting for the GIGA JUKE Wireless Player. For details on Internet radio services, refer to the leaflet Internet Radio Service on GIGA JUKE Wireless Player for the GIGA JUKE Wireless Player. Wireless Station Operating Instructions for a description of the Wireless Station. DIGITAL MEDIA PORT Adapter Operating Instructions for details on operations and troubleshooting for the DIGITAL MEDIA PORT Adapter. Customer support site of Sony Europe at http://support.sony-europe.com/ (for customers in Europe only). GB
Checking the required items (Package contents) If you find any items missing or damaged, please contact your nearest Sony dealer. GIGA JUKE Music Server and its supplied accessories GIGA JUKE Music Server NAS-S55HDE (1) GIGA JUKE Wireless Player and its supplied accessories GIGA JUKE Wireless Player NAS-C5E (1) 12V AC power adaptor (1) Power cord (1) Power cord for models except the UK model Power cord for the UK model Wireless adaptor (1) USB extension cable (1) The supplied power cord comes with an attached clamp filter. This power cord is designed for exclusive use with NAS-C5E only. FM lead antenna (1) AM loop antenna (1) Wireless station and its supplied accessories Wireless station WAP-NA1 (1) Network (LAN) cable (1) Speaker cords (2) 5V AC power adaptor (1) DAB wire antenna (for the UK model only) (1) Power cord (1) Power cord for models except the UK model Power cord for the UK model 3 GB
Connecting the speakers and antennas of the GIGA JUKE Music Server 1 2 1 UK model 5 4 6 3 This operation is performed on the GIGA JUKE Music Server. Note DO NOT plug the power cord into a wall outlet until instructed to do so. Follow the steps below to connect the supplied speakers and antennas to the GIGA JUKE Music Server. 1 Connect the speaker cords to the speakers. Make sure the metal leads (not the part covered with vinyl insulation) are securely inserted into the speaker terminals. Insert the end of the cord marked with a red line into the + terminal and the cord with no marking into the terminal. GB Red line
2 Connect the speakers to the unit. Make sure the speaker cords are correctly matched with the projections on the SPEAKER terminals, and then insert the cords firmly into the SPEAKER terminals. Make sure to keep the speaker away from the antennas as they may produce noise in the radio reception. 3 Connect the AM loop antenna. Make sure to keep the AM loop antenna away from the unit or other AV equipment as this may produce noise in the radio reception. 4 Connect the FM wire antenna. Use a commercially available 75 coaxial cable to connect the unit to an external antenna. External antenna GB
5 Connect the DAB wire antenna (UK model only). With a DAB external antenna, you can enjoy a more robust DAB reception (optional). It is recommended that you use the supplied DAB wire antenna for strong reception areas only. 75 coaxial cable with F male type connector will be needed to install the DAB external antenna (optional). DAB wire antenna GB
Setting up the Instant (S-IWS) connection To listen to audio data on your GIGA JUKE Music Server with the GIGA JUKE Wireless Player, you need to connect these devices through a wireless station. With the NAS-SC55PKE, you can connect the devices over a wireless network through Instant (S-IWS*) connection, allowing you to play audio data stored on the GIGA JUKE Music Server through the speakers of the GIGA JUKE Wireless Player placed in a different room. * S-IWS (Sony Instant Wireless Audio Setup) is a function that can connect and set up a wireless network automatically by turning on the power of the devices. This operation is performed on the GIGA JUKE Music Server, the GIGA JUKE Wireless Player and the wireless station. Wireless adaptor Wireless station Attach the supplied stand to the wireless station. Confirm that the operation mode switch (located at the rear of the wireless station) is set to AUTO. Use the 5V AC power adaptor (supplied with the wireless station) to connect the wireless station to a wall outlet. Confirm that the POWER indicator is lit. Wait until the INSTANT indicator lights up and the AOSS indicator turns off. (This may take several minutes.) If this does not occur on the wireless station, press the RESET button. Use something with a pointed tip, such as a small pin, to press the RESET button. 2 Connect the GIGA JUKE Music Server and the wireless station. To a wall outlet To the USB port GIGA JUKE Music Server GIGA JUKE Wireless Player Note You may encounter setup difficulties if the GIGA JUKE Music Server, the GIGA JUKE Wireless Player and the wireless station are located too far from each other. If you do, place the devices closer to each other. 1 Turn on the wireless station. (power) Connect the supplied wireless adaptor to the USB port on the GIGA JUKE Music Server using the supplied USB extension cable. RESET button To a wall outlet GB
Connect the power cord of the GIGA JUKE Music Server to a wall outlet. The GIGA JUKE Music Server automatically turns on, makes the initial settings (the display shows Checking System Please Wait ), and then turns off. The initial settings may take a few minutes depending on the condition of the GIGA JUKE Music Server. Do not disconnect the power cord while the initial setup is in progress. Doing so may cause the GIGA JUKE Music Server to malfunction. Press (power) to turn on the GIGA JUKE Music Server. The GIGA JUKE Music Server starts connecting to the wireless station. When the connection has completed, this is indicated by a pop-up window. Press (power) to turn on the GIGA JUKE Wireless Player. The GIGA JUKE Wireless Player starts connecting to the wireless station. Language displayed on the screen depends on the language that is set on the GIGA JUKE Wireless Player. For details on the display language setting, see page 11. When Instant (S-IWS) setting with wireless station is completed. appears, press / to select [OK] and press ENTER. The name of the GIGA JUKE Music Server (e.g., NAS-S55HDE ) appears in the server selection display. Language displayed on the screen depends on the language that is set on the GIGA JUKE Music Server. For details on the display language setting, see page 11. If the name of the GIGA JUKE Music Server does not appear, press to select [Update info] and press ENTER. 3 Connect the GIGA JUKE Wireless Player and the wireless station. (power) Connection between the GIGA JUKE Music Server and the GIGA JUKE Wireless Player is completed. Should you experience any problems, see Troubleshooting on page 19. To the DC IN 12V jack To a wall outlet Use the 12V AC power adaptor (supplied with the GIGA JUKE Wireless Player) to connect the GIGA JUKE Wireless Player to a wall outlet. GB
Connecting to the Internet Choose either the Instant (S-IWS) connection or AOSS connection to connect the devices to the Internet, though the AOSS connection is recommended when connecting the devices to the Internet together with a computer. Connecting the devices to the Internet enables the GIGA JUKE Wireless Player to receive Internet radio (web radio). For details on how to use this feature, see Listening to the Internet radio on the GIGA JUKE Wireless Player (page 16). For other features of each devices while connected to the Internet, refer to Features on this unit in the operating instructions for the GIGA JUKE Music Server or Features of this unit in the operating instructions for the GIGA JUKE Wireless Player. Note Using the Instant (S-IWS) wireless connection may lower the security level of your home network. To obtain a security level higher than that of the Instant (S-IWS) connection, the AOSS connection is recommended. Instant (S-IWS) connection Network (LAN) cable (supplied) To the INTERNET port Wireless station Wireless adaptor Broadband router, hub, etc. currently being used to access the Internet GIGA JUKE Music Server GIGA JUKE Wireless Player Use the network (LAN) cable (supplied with the wireless station) to connect the wireless station with the device (such as a broadband router or a hub) that is connected to the Internet. For details on how to set up the broadband router, refer to the operating manual for the broadband router. GB
AOSS connection Operation mode switch Broadband router Computer Wireless adaptor Wireless station To the INTERNET port GIGA JUKE Music Server GIGA JUKE Wireless Player 1 Set the operation mode switch on the wireless station to MODE 2, and then connect the wireless station to a broadband router. 2 On the GIGA JUKE Music Server, perform the AOSS connection by pressing SETTINGS and selecting [Network setting] [Manual setting] [Wireless LAN setting] [Access point setting] [Automatic setting : AOSS] using / and ENTER. Follow the instructions that appear in the display. 3 On the GIGA JUKE Wireless Player, perform the AOSS connection by pressing SETTINGS and selecting [Network setting] [Manual setting] [Connection setting] [AOSS] using / and ENTER. Follow the instructions that appear in the display. 10 GB
Selecting the display language English, French, German, Italian or Spanish may be selected for the display language. 4 Press / / / to select [Execute] and press ENTER. The display changes in the selected language. On the GIGA JUKE Music Server On the GIGA JUKE Wireless Player SETTINGS / /ENTER / / / / ENTER 1 Press SETTINGS. The Settings menu appears. SETTINGS 1 Press SETTINGS. The Settings menu appears. 2 Press / to select [Option] and press ENTER. 2 Press / to select [Screen setting] and press ENTER. The display for selecting the language appears. 3 Press / to select the desired language from the [Language] setting and press ENTER. Display English Français Deutsch Italiano Español ( : Factory setting) Selectable language English French German Italian Spanish 3 Press / to select [Language] and press ENTER. 4 Press / to select the desired language from the [Language] setting. Display English Français Deutsch Italiano Español ( : Factory setting) Selectable language English French German Italian Spanish 5 Press ENTER. The display changes in the selected language. 11 GB
Recording a CD to the HDD Jukebox of the GIGA JUKE Music Server You can record audio data from a CD to the GIGA JUKE Music Server. This operation is performed on the GIGA JUKE Music Server. 1 Press CD on the GIGA JUKE Music Server and place a disc into the disc tray. The disc tray slides out. 2 Press HDD REC. Tracks are recorded in MP3 audio format and a bit rate of 128 kbps. To change the recording settings, refer to Setting up the unit for recording or importing in the operating instructions for the GIGA JUKE Music Server. HDD REC Load a disc with the label side up. The disc tray closes when you press CD again. The unit automatically starts searching for the latest title information for the disc from its database and over the Internet if connected to the Internet. If title information cannot be found, it will not be displayed. At the end of recording, the display automatically changes to the main display of the CD function. Note When recording a CD, the unit may produce more noise and vibration than during CD playback. This is because of the higher disc rotation speed used during recording and is not a malfunction. The amount of noise or vibration produced will vary depending on the CD type. 12 GB
Playing the HDD Jukebox of the GIGA JUKE Music Server This operation is performed on the GIGA JUKE Music Server. HDD To play tracks in different listing mode Press repeatedly to select Mode directory, press / to select the desired listing mode, and then press ENTER. You can select from [Album], [Artist], [Genre], [Recording source], [Folder], or [Playlist]. Press HDD on the GIGA JUKE Music Server. Playback starts from the track you last played or recorded. Track name Playback indication Time information (elapsed time) Other operations To Do the following Stop playback Press. Select a track Press / / /. Album name, etc. Artist name 13 GB
Playing audio data stored on the GIGA JUKE Music Server through the GIGA JUKE Wireless Player You can use the GIGA JUKE Wireless Player to play audio data stored on your GIGA JUKE Music Server. Before you can do this, you must first connect the GIGA JUKE Wireless Player to the GIGA JUKE Music Server. This operation is performed on the GIGA JUKE Wireless Player. Note If standby mode on the GIGA JUKE Music Server is set to Standard (power save), the GIGA JUKE Wireless Player will not be able to connect to the GIGA JUKE Music Server. 3 Press / to select the item you want to play. You can select from [Playlist]*, [Artist]*, [Album]*, [Genre]*, [Year]*, [All tracks]*, or [Select server]. Press to go to the next directory up. If you press after reaching the highest directory, the display returns to the playback window. Press to go to the next directory down. * Items are displayed in the language that is set on the GIGA JUKE Music Server. HOME NETWORK / / / / ENTER 1 Press HOME NETWORK on the GIGA JUKE Wireless Player. 2 Confirm that the name of the GIGA JUKE Music Server (e.g., [NAS- S55HDE]) appears in the server selection display, and then press ENTER. Note If the connected GIGA JUKE Music Server contains a large amount of audio data, it may take a while for the display to change while the unit is searching for a track. 4 Press ENTER or to switch the display, and then press / to select the track you want to play. The unit starts playing the selected track and the playback display appears. Adjust the volume of the unit. If the name of the GIGA JUKE Music Server does not appear, press to select [Update info], and then press ENTER. 14 GB
Other operations To Pause playback Stop playback Do the following Press during playback. Press again to resume playback. Press to turn off the unit. The next time you turn on the unit, the unit starts playing the track from the point at which it stopped. 15 GB
Listening to the Internet radio on the GIGA JUKE Wireless Player You can listen to Internet radio broadcasts offered on the Web by Live365 and SHOUTcast on the GIGA JUKE Wireless Player. To listen to the Internet radio, the wireless station or the wireless LAN access point has to be connected to the Internet. For details on connecting to the Internet, refer to Connecting to the Internet on page 9. For details on Internet radio services, refer to the supplied Internet Radio service on GIGA JUKE Wireless Player. This operation is performed on the GIGA JUKE Wireless Player. Note If the clock is not correctly set, you will not be able to obtain the list of radio stations compiled by the Live365 website. See the Operating Instructions of the GIGA JUKE Wireless Player on how to set the clock. INTERNET RADIO / /ENTER 2 Press / to select [Live365] or [SHOUTcast], and then press ENTER. 3 If you select [Live365] in step 2, press / to select the desired station, and then press ENTER. If you select [SHOUTcast] in step 2, press / to select the desired genre, sub genre, station, and then press ENTER. Notes The unit starts receiving the selected radio station. The service contents mentioned in this manual are current as of July, 2008. These contents are subject to change or cancellation without notice. If after selecting a radio station the unit does not connect within one minute, Cannot connect to the radio station. appears in the display. If you select [OK], the playback display appears with no sound. Other operations 1 Press INTERNET RADIO on the GIGA JUKE Wireless Player. The unit changes to the Internet Radio function. To Do the following Pause reception of a radio broadcast Change the radio station Press. Press again to resume the broadcast. Press to go back to the radio station list and select a station again. 16 GB
Transferring audio data from the HDD Jukebox of the GIGA JUKE Music Server to a WALKMAN You can transfer audio data to a WALKMAN. Refer to the customer support site of Sony Europe, http://support.sony-europe.com/ (for customers in Europe only) for the compatible models. This operation is performed on the GIGA JUKE Music Server. 1 Connect a compatible WALKMAN to the USB port on the top of the GIGA JUKE Music Server. Refer to the operating manual of the WALKMAN as well. USB port HOME / / / / ENTER TRANSFER 2 Press HOME to select the Home menu. Notes If the AC power adaptor is supplied with the WALKMAN it is recommended that you operate it on house current. When operating the WALKMAN on batteries, make sure the remaining battery power is sufficient. We do not guarantee against malfunctions, transfer failures, or destruction of audio data caused by shortages in battery power. Make sure that you do not disconnect the USB cable during the transfer of tracks to a WALKMAN. If you do, the unit or WALKMAN may malfunction. 3 Press / / / to select [HDD JUKEBOX], and then press ENTER. 17 GB
4 Press repeatedly to select Mode directory. 5 Press / / / to display the albums, playlists, groups, or tracks that you want to transfer. 6 Press TRANSFER. 7 Press / to select the albums, playlists, groups, or tracks that you want to transfer, and then press ENTER to put a check on. 8 Press to select [Execute] and press ENTER, or press TRANSFER. When the transfer is completed, remove the WALKMAN. To cancel a transfer Press BACK. When you cancel a transfer, it may take a while for the transfer to stop. 18 GB
Troubleshooting If a problem occurs when connecting, follow the below procedures. For other problems see the operating instructions of each devices. The Instant (S-IWS) connection is not possible ( Wireless LAN Instant (S-IWS) Connected. does not appear in the network setting display of the GIGA JUKE Music Server). The GIGA JUKE Wireless Player cannot connect with the GIGA JUKE Music Server (the name of your GIGA JUKE Music Server does not appear in the server selection display of the GIGA JUKE Wireless Player). Do the following procedure. 1 Disconnect the 5V AC power adaptor from the wireless station, and then check the operation mode switch on the wireless station is set to AUTO. If the supplied network (LAN) cable is connected to the wireless station, disconnect it. 2 Reconnect the 5V AC power adaptor, wait for a while, and then press the RESET button. Use something with a pointed tip, such as a small pin, to press the RESET button. Wait until the INSTANT indicator lights up and the AOSS indicator turns off (this may take several minutes). If this does not occur on the wireless station, press the RESET button again. 3 If a network cable is connected to the GIGA JUKE Music Server, disconnect it. 4 Connect the wireless adaptor to the USB port of the GIGA JUKE Music Server. 5 On the GIGA JUKE Music Server, perform the Instant (S-IWS) connection by pressing SETTINGS and selecting [Network setting] [Auto setting] using / and ENTER. Or, press SETTINGS, and then select [Network setting] [Manual setting] [Wireless LAN setting] [Access point setting] [Automatic setting: Instant (S-IWS)] using / and ENTER. 6 On the GIGA JUKE Wireless Player, perform the Instant (S-IWS) connection by pressing SETTINGS and selecting [Network setting] [Auto setting] using / and ENTER. Or, press SETTINGS, and then select [Network setting] [Manual setting] [Connection setting] [Instant (S-IWS)] using / and ENTER. The GIGA JUKE Music Server or the GIGA JUKE Wireless Player cannot connect to the Internet. Do the following procedure. 1 Disconnect the 5V AC power adaptor from the wireless station, and then set the operation mode switch on the wireless station to MODE 2. If the supplied network (LAN) cable is connected to the wireless station, disconnect it. 2 Connect the wireless station to the broadband router with the supplied network (LAN) cable. When connecting the wireless station and a broadband router, connect the supplied network (LAN) cable to the INTERNET port on the wireless station (see the figures on pages 9 and 10). 3 Reconnect the 5V AC power adaptor, wait for a while, and then press the RESET button. Use something with a pointed tip, such as a small pin, to press the RESET button. Wait until the INSTANT indicator lights up and the AOSS indicator turns off (this may take several minutes). If this does not occur on the wireless station, press the RESET button again. 19 GB
20 GB 4 If a network cable is connected to the GIGA JUKE Music Server, disconnect it. 5 Connect the wireless adaptor to the USB port of the GIGA JUKE Music Server. 6 When performing the Instant (S-IWS) connection: On the GIGA JUKE Music Server, press SETTINGS, and then select [Network setting] [Auto setting] using / and ENTER. Or, press SETTINGS, and then select [Network setting] [Manual setting] [Wireless LAN setting] [Access point setting] [Automatic setting: Instant (S- IWS)] using / and ENTER. When performing the AOSS connection: Do step 2 of the AOSS connection procedure in Connecting to the Internet on page 10. 7 When performing the Instant (S-IWS) connection: On the GIGA JUKE Wireless Player, press SETTINGS, and then select [Network setting] [Auto setting] using / and ENTER. Or, press SETTINGS, and then select [Network setting] [Manual setting] [Connection setting] [Instant (S-IWS)] using / and ENTER. When performing an AOSS connection: Do step 3 of the AOSS connection procedure in Connecting to the Internet on page 10.