JABRA DRIVE USER MANUAL

Transcription

1 JABRA DRIVE USER MANUAL

2 Contents THANK YOU...2 ABOUT YOUR JABRA DRIVE...2 WHAT YOUR JABRA DRIVE CAN DO....3 HOW TO PRESS THE BUTTONS...4 WHAT THE LIGHT MEANS...4 GETTING STARTED CHARGING YOUR JABRA DRIVE...5 TURNING YOUR JABRA DRIVE ON AND OFF...6 PAIRING YOUR JABRA DRIVE WITH YOUR PHONE...6 CONNECTING WITH YOUR PHONE AUTOMATICALLY....7 PLACING JABRA DRIVE IN YOUR VEHICLE....8 ADDITIONAL FEATURES...8 HOW TO HANDLE CALLS FROM A SINGLE PHONE...9 HOW TO HANDLE CALLS FROM TWO MOBILE PHONES TROUBLESHOOTING & FAQ Need more help? TAKING CARE OF YOUR JABRA DRIVE GLOSSARY

3 THANK YOU Thank you for purchasing the Bluetooth in-car speakerphone. We hope you enjoy it! This instruction manual will get you started and ready to make the most of your in-car speakerphone. ABOUT YOUR JABRA DRIVE A Status light B Answer/end button C Volume control D Integrated Visor Clip E Microphone F On/off switch G Micro USB charging connector B A C D F G E 2

4 WHAT YOUR JABRA DRIVE CAN DO Your lets you do all this: - Answer calls - End calls - Reject calls* - Voice dialing* - Last number redial* - Mute - Third party calling* - Adjust volume - Transmit mobile music, podcasts and directions from a GPS app - Advanced Multiuse Stay connected to two active Bluetooth devices at the same time Specifications - Talk time up to 20 hours/standby time up to 30 days - Charging time approximately 2 h. 30 min. - Digital sound enhancement via DSP technology - Noise cancellation through DSP - Echo cancellation through DSP - A2DP (Advanced Audio Distribution Profile) for transmitting music, podcasts and directions from a GPS app on your phone - Jabra Status Light (battery status, call status, connection status) - Size: H104 mm W56 mm D18 mm - Weight 100 grams - Operating range up to 10 meters (approximately 33 feet) - Supported Bluetooth profiles: HFP, HSP, A2DP - Bluetooth specification version e-sco for enhanced audio quality - Rechargeable battery with charging option from car charger or via USB cable * Phone dependent 3

5 HOW TO PRESS THE BUTTONS Instruction Tap Double Tap Press Press and hold Duration of press Press briefly 2 quickly repeated taps Approx. 1-2 seconds Approx. 5 seconds WHAT THE LIGHT MEANS Status Light The status light behind the answer/end button flashes rapidly blue The status light turns solid blue and goes into standby light mode The status light flashes blue every 2 nd second The status light flashes blue every second The status light turns solid blue The status light is flashing red The status light turns red The status light turns green Speakerphone Status Pairing mode Connected Standby/Idle Incoming call Active call There is less than 30 min. talk time left The unit is charging Fully charged or the charging level is between 70% and fully charged 4

6 GETTING STARTED You should follow three steps before using your speakerphone 1 Charge your 2 Turn your on 3 Pair your with your mobile phone The is easy to operate. The answer/end button on the speakerphone performs different functions depending on how long you press it. CHARGING YOUR JABRA DRIVE Make sure that your speakerphone is fully charged for two hours before you start using it. Use the USB cable to connect to the car charger. Plug the car charger into your car s power outlet. The status light will light up red while charging. When fully charged the status light turns green. can be charged outside your car by only using the USB cable. Use only the charger provided in the box - do not use chargers from any other devices as this may damage your speakerphone. Please note: The lifetime of the battery will be significantly reduced if your device is left uncharged for a long period. We therefore recommend that you recharge your device at least once a month. 5

7 TURNING YOUR JABRA DRIVE ON AND OFF Slide the on/off switch to turn the speakerphone on or off. Sleep mode and Auto OFF When not connected to a phone, the speakerphone turns off automatically after 10 minutes. Use the on/off switch to turn the speakerphone on again. On/Off PAIRING YOUR JABRA DRIVE WITH YOUR PHONE is connected to a mobile phone using a procedure called pairing. By following a few simple steps, a phone can be paired with the speakerphone in a matter of minutes. 1 Activate Bluetooth on your mobile phone Please check the manual for your mobile phone. 2 Put the speakerphone in pairing mode When you turn on your for the first time, the speakerphone will automatically start up in pairing mode i.e. it can be detected by your phone. When the speakerphone is in pairing mode the status light will flash rapidly blue. 3 Set your Bluetooth phone to search for the JABRA DRIVE Follow your phone s instruction guide. First make sure that Bluetooth is activated on your mobile phone. Then set your phone to search for devices. This usually involves going to a setup, connect or Bluetooth menu on your phone and selecting the option to search or add a Bluetooth device.* * Phone dependent 6

8 4 Your phone will find the Your phone will find the speakerphone under the name JABRA DRIVE. Your phone then asks if you want to pair with the JABRA DRIVE. Accept by pressing Yes or OK on the phone and/or confirm with the passkey or PIN = 0000 (4 zeros). Your phone will confirm when pairing is complete. CONNECTIVITY MobilSurf BLUETOOTH Infrared port Wap options Synchronization Networks SELECT DEVICES FOUND SELECT Passkey: **** OK HANDSFREE added. The handsfree is now ready for use SELECT Manual pairing mode If you wish to use the speakerphone with a different phone, or if the pairing process was interrupted, you can manually set the speakerphone to pairing mode. Turn the speakerphone on. Press and hold the answer/end button for approximately 5 seconds until the status light stars blinking rapidly blue. Then repeat steps 2. and 3. in the above pairing guide. CONNECTING WITH YOUR PHONE AUTOMATICALLY Pairing is only needed the first time a speakerphone and phone are used together. When the speakerphone and phone have been paired once they will automatically connect when the speakerphone is on and Bluetooth is activated on the phone. The speakerphone can be used when it is connected to the phone. If the devices are paired, but do not immediately connect, tap the answer/end button. 7

9 PLACING JABRA DRIVE IN YOUR VEHICLE The sits discreetly and conveniently on the sun visor using the integrated metal clip. The product can be easily taken on and off the sun visor. For optimal sound quality place the Jabra DRIVE right in front of you and speak directly into the speakerphone. ADDITIONAL FEATURES Play music and GPS directions* Make sure that the speakerphone and mobile phone are connected. When you play music or GPS application directions from your mobile phone it will automatically transfer to your speakerphone. If your phone does not allow this feature, press the answer/end button to transfer the music to the speakerphone. Music or GPS directions will automatically be paused when you have an incoming call. When the call is ended it will start playing again. Easy Voice Guidance** - Easy voice guidance informs you about your connection and low battery status. - Connected is announced when the in-car speakerphone reconnects with your phone. - Low battery is announced every 10 th min when there is less than 30 min. talk time on your. Advanced Multiuse - can be connected to two mobile devices at the same time. To learn more about Advanced Multiuse please go to the HOW TO HANDLE CALLS FROM TWO MOBILE PHONES section * Phone dependent ** Available ONLY in English 8

10 HOW TO HANDLE CALLS FROM A SINGLE PHONE Function Single call Answer or end a call Make a call Reject a call* Redial last number* Mute Un-mute Adjust volume How to perform Tap the answer/end button on your speakerphone to answer or end a call The call will automatically transfer to your speakerphone*. If not tap the answer/end button Double tap the answer/end button to reject the incoming call Double tap the answer/ end button when the speakerphone is on and not used Long press the volume down button. A sound will indicate that the speakerphone is on mute every 10 seconds until the speakerphone is un-muted Long press the volume down button. A short sound will indicate that your speakerphone is un-muted Tap volume + or volume- to adjust the volume level. A short sound will indicate when the volume level is at its highest or lowest limit * Phone dependent 9

11 Hold active call Transfer an active call from your phone to Press the answer/end button Tap the answer/end button or press it for a long time Three way call (Another incoming call) Release active-accept Tap the answer/end button incoming call Hold active/accept incoming Press the answer/end button Reject incoming call Double tap the answer/end button Three way call (The other call is on hold) Release active/activate held Tap the answer/end button Hold active and activate Press the answer/end button held call Release held call Double tap the answer/end button HOW TO HANDLE CALLS FROM TWO MOBILE PHONES Function How to perform Calls on two phones (One active call the other phone is ringing) Release active/accept Tap the answer/end button incoming call Reject incoming call Double tap the answer/end button Hold active/accept incoming*** Press the answer/end button ***Active calls on the two connected Jabra phones DRIVE other phone s call is on hold 10

12 Function How to perform Release active/activate held Hold active and activate held call Release held call Tap the answer/end button Press the answer/end button Double tap the answer/end button TROUBLESHOOTING & FAQ I hear crackling noises Bluetooth is a radio technology, which means it is sensitive to objects between the speakerphone and the connected device. It is designed for the speakerphone and the connected device to be used within 33 feet (10 meters) of each other, with no major objects in the way (walls, etc.). I cannot hear anything in my speakerphone - Increase the volume in the speakerphone. - Ensure that the speakerphone is paired to a device that is playing. - Make sure your phone is connected to the speakerphone by tapping the answer/end button. I am having pairing problems - You may have deleted your speakerphone pairing connection in your mobile phone. Follow the pairing instructions. I want to reset the pairing list in my speakerphone The speakerphone registers a list of up to 7 mobile phones. To remove the list: 1) Put your in the pairing mode by long press on the answer/end button; 2) The press Volume down button while holding your finger on the answer/end button. A beep and a purple flash of the status light indicate the list was removed from the speakerphone memory. The next time you power on, the speakerphone will go into pairing mode as the first time you powered your new on. 11

13 Will the work with other Bluetooth equipment? - The is designed to work with Bluetooth mobile phones. It can also work with other Bluetooth devices that are compliant with Bluetooth version 1.1 or higher and support a headset, hands-free and/or advance audio distribution profile. I cannot use Reject call, call on hold, Redial or voice dialing - These features are dependent on the ability of your phone to support a hands-free profile. Even if the hands free profile is implemented reject call, call hold and voice dialing are optional features which are not supported by all devices. Please consult your device manual for details. Please note that some features can only be operated from the primary device e.g. voice dial using with 2 mobile phones. Need more help? 1. Web: (for the latest support info and online User Manuals) 2. Deutsch English Español Français Italiano Nederlands Polska Scandinavian Россия support.de@jabra.com support.uk@jabra.com support.es@jabra.com support.fr@jabra.com support.it@jabra.com support.nl@jabra.com support.pl@jabra.com support.no@jabra.com support.ru@jabra.com Information: info@jabra.com 12

14 3. Phone: Belgique/Belgie Danmark Deutschland Die Schweiz España France Italia Luxembourg Nederland Norge Österreich Polska Portugal Suomi Sverige United Kingdom Россия International TAKING CARE OF YOUR JABRA DRIVE - Always store the with the power off and safely protected. - Avoid storage at extreme temperatures (above 45 C/113 F including direct sunlight or below -10 C/14 F). This can shorten battery life and may affect operation. High temperatures may also degrade performance. - Do not expose the to rain or other liquids. 13

15 GLOSSARY 1. Bluetooth is a radio technology that connects devices, such as mobile phones and headsets, without wires or cords over a short distance approx. 33 feet (10 meters). Get more information at 2. Bluetooth profiles are the different ways that Bluetooth devices communicate with other devices. Bluetooth phones support the headset profile, the hands-free profile or both. In order to support a certain profile, a phone manufacturer must implement certain mandatory features within the phone s software. 3. Pairing creates a unique and encrypted link between two Bluetooth devices and lets them communicate with each other. Bluetooth devices will not work if the devices have not been paired. 4. Passkey or PIN is a code that you enter on your mobile phone to pair it with your. This makes your phone and the recognize each other and automatically work together. The passkey for all Jabra products is Standby mode is when the is passively waiting for a call. When you end a call on your mobile phone, the speakerphone goes into standby mode. Dispose of the product according to local standards and regulations. 14

16 2011 GN Netcom US, Inc. All rights reserved. Jabra is a registered trademark of GN Netcom A/S. All other trademarks included herein are the property of their respective owners. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom A/S is under license. (Design and specifications subject to change without notice) GN Netcom A/S. All rights reserved. Jabra is a registered trademark of GN Netcom A/S. All other trademarks included herein are the property of their respective owners. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom A/S is under license. (Design and specifications subject to change without notice). Made in China Type: HFS004 FCC ID: xxxxxxx IC: xxxxxxxx Rev A