ED technology THE ART OF IGHTIG ORY40R WW Ordernr: A0139821 amptype: recessed downlight Beam Angle 40 1x 2.1 W warmwhite ED Equivalent uminus Flux: Φeff 119.11 m Efficiency: Eff=56.79m/W Imax: 608cd (C=0.0, G=0.0 ) ight direction: direct with frost glass Housing: solid Aluminium white powdercoated RA9003 Weight: 0.08 Kg Dimensions fixture: 46 x 46 x 37 mm Classification: IP40 Class III Operating Power: constant current 700mA Max. forward Voltage Vf: 3.3V Excluded (external) EDdriver Advised Dimmable or on dimmable EDdrivers: 700mA (see next pages) Vf 700mA 3.3 Power excluded 0.88 40 Always disconnect the mains of the ED driver before plugging or unplugging the ED`s The ED`s will be damaged or destroyed because of the high voltage present on the driver output when there is no load connected. Connect the main after all ed`s and plugs are connected Height Orly40 Dimensions in mm 16 21,36 21.7 Øm Avg. adir.e 0.5m 0.19m 1732 x 2434 x 1.0m 0.38m 433 x 609 x 1.5m 0.58m 192 x 270 x 2.0m 0.77m 108 x 152 x 2.5m 0.96m 78 x 110 x 3.0m 1.15m 48 x 68 x ø 46 46 37 40 IDOOR RATED Recessed downlights
A on dimmable Driver Driver included 1x 700mA serial connection box with 100cm cable openend A9950005 Constant Current ED Driver 700mA SEC Input 100240VAC 50/60Hz Cos 0.95 Uout: 818VDC Pout: 612W Ta: 20 C 50 C A9950005 Constant current EDDriver @ 700mA 12W / Vf: 18 @110VAC 700mA 6W / Vf: 8 @ oad min. 1x Orly2R & max. 5x Orly2R @110VAC oad min. 1x Orly2R & max. 2x Orly2R before switching on the power B PRI 100240V AC fixture inclusiv: Dimmable by A9910010 & pulse switch 110V ED Driver A9915010 fixture inclusiv: A9950010 Constant current ED Driver Output currency by internal dipswitches SEC SYC O 1 2 3 4 5 6 Dipswitch for selection output currency Set to 700mA: Switch 5 & 6 to O PUSH PRI 100240V AC More drivers (max.10) can be connected and controlled by one Pulse Switch, using the sync. connection cable A9950017 Synchronise conectioncable to connect the next driver Pulse Switch: Short push to turn O and OFF Push and hold to increase or decrease light intensity @ oad min. 1x Orly2R & max. 7x Orly2R @110VAC oad min. 1x Orly2R & max. 4x Orly2R before switching on the power D 110V Dimmable by Rotary Dimmer 1Channel 110VControl (Jung 24010) ~ ~ 010V Constant Current output is standart set to 350mA For 700mA setting, the toolbox A9915056 is required 120277 VAC A9950360 EldoED SoloDrive30W S0361 A Dimmable 110V ED constant current driver max. 30W 1 ED group 2001050mA / 255Vf ED output EDcode TC 1Channel 110VDriver EDcode ToolboxPro (connection) oad min. 1x Orly2R & max. 7x Orly2R before switching on the power
E Dimmable with EldoED 3channel Driver and DMXcontroller A9950044 EldoED PowerDrive50W (PWR0562 A1) 3 separately Dimmable ED outputs controllable by 3 DMXAdresses The constant current output is standart set to 350mA For other settings, the toolbox Pro A9915056 is required EDcode ToolboxPro (connection) DMXControl ART8D DMXControl Dimming each group separatly and creating 8 dimming scenes PowerSupply 120277 VAC Max. length DMXcable 100200 mtr included IRControl Up to 8 EDGroups can be controlled by the ART8D DMXControler Each group can be dimmed separatly and 8 dimming scenes can be recorded oad max. 7x Orly2R to one outputchannel and total max. 21 Orly2R to one driver and to avoid damages to the ED, before switching on the power
F Dimmable with EldoED 4channel Driver and DMXcontroller 3 5 0A A9950045 EldoED PowerDrive100W (PWR16 A1) 4 separately Dimmable ED outputs controllable by 4 DMX or DAI Adresses or 110V The constant current output is standart set to 350mA and All settings, can be changed by 3 buttons (M ) below the CD The PowerDrive100 can be set to different controlmodes; 1 DMXChannel: Fader1 controlls all 4 EDGroups 2 DMXChannels: Fader1 controlls EDGroup 1&2 Fader2 controlls EDGroup 2&3 4 DMXChannels: Fader1 controlls EDGroup1, Fader2 controlls EDGroup2, Fader3 controlls EDGroup3 Fader4 controlls EDGroup4 ART8D DMXControl Dimming each group separatly and creating 8 dimming scenes DMXControl PowerSupply Max. length DMXcable 100200 mtr Sync 120277VAC 4 ED groups set to 700mA each: max.55vf DAI EDcode Ext in included IRControl Up to 8 EDGroups can be controlled by the ART8D DMXControler Each group can be dimmed separatly and 8 dimming scenes can be recorded oad max. 8x Orly2R to one outputchannel and total max. 32 Orly2R to one driver and to avoid damages to the ED, before switching on the power
G1 Standalone Mode with A9915014 CCD4 4channel constant current PWMDimmer in standalone mode, Button:1,2,3 using the builtin (fade)patterns Set fade time Button: 4,5,6 Set running speed Button: 7,8,9 Set Patterns OTE The CCD4 (read the CCD4 manual) Button: 10 set to O Button: 11 set to OFF A9900360 P30 30W Powersupply A9915014 CCD4 4channel constant current EDdimmer Separate available (see page1): A9920500 3AP ED 3way serial connection box A9920501 6AP ED 3way serial connection box oad max. 1x Orly2R to one channeloutput & max. 4x Orly2R totaly before switching on the power G2 Standalone Mode with A9915014 CCD4 4channel constant current PWMDimmer in standalone mode, Button: 1, 2, 3, 4, 5, 6, 7, 8, 9 using the dimmer function Set dimming by set more buttons to O Button: 10 set to OFF Button: 11 set to OFF OTE The CCD4 (read the CCD4 manual) A9900360 P30 30W Powersupply A9915014 CCD4 4channel constant current EDdimmer Separate available (see page1): A9920500 3AP ED 3way serial connection box A9920501 6AP ED 3way serial connection box G2 Standalone Mode with A9915014 CCD4 4channel constant current PWMDimmer DMXcontrolled by an external controller oad max. 1x Orly2R to one channeloutput & max. 4x Orly2R totaly before switching on the power OTE The CCD4 (read the CCD4 manual) Use button 19 for setting the DMX starting adress. Tip: Download the DMXapplication Button: 10 set to OFF Button: 11 set to O DMXcontrol A9900360 P30 30W Powersupply A9915014 CCD4 4channel constant current EDdimmer Separate available (see page1): A9920500 3AP ED 3way serial connection box A9920501 6AP ED 3way serial connection box oad max. 1x Orly2R to one channeloutput & max. 4x Orly2R totaly before switching on the power